diff options
66 files changed, 770 insertions, 158 deletions
diff --git a/Documentation/RelNotes/1.8.3.1.txt b/Documentation/RelNotes/1.8.3.1.txt new file mode 100644 index 0000000000..fc3ea185a5 --- /dev/null +++ b/Documentation/RelNotes/1.8.3.1.txt @@ -0,0 +1,14 @@ +Git v1.8.3.1 Release Notes +======================== + +Fixes since v1.8.3 +------------------ + + * When $HOME is misconfigured to point at an unreadable directory, we + used to complain and die. The check has been loosened. + + * Handling of negative exclude pattern for directories "!dir" was + broken in the update to v1.8.3. + +Also contains a handful of trivial code clean-ups, documentation +updates, updates to the test suite, etc. diff --git a/Documentation/RelNotes/1.8.3.2.txt b/Documentation/RelNotes/1.8.3.2.txt new file mode 100644 index 0000000000..26ae142c3d --- /dev/null +++ b/Documentation/RelNotes/1.8.3.2.txt @@ -0,0 +1,59 @@ +Git v1.8.3.2 Release Notes +========================== + +Fixes since v1.8.3.1 +-------------------- + + * Cloning with "git clone --depth N" while fetch.fsckobjects (or + transfer.fsckobjects) is set to true did not tell the cut-off + points of the shallow history to the process that validates the + objects and the history received, causing the validation to fail. + + * "git checkout foo" DWIMs the intended "upstream" and turns it into + "git checkout -t -b foo remotes/origin/foo". This codepath has been + updated to correctly take existing remote definitions into account. + + * "git fetch" into a shallow repository from a repository that does + not know about the shallow boundary commits (e.g. a different fork + from the repository the current shallow repository was cloned from) + did not work correctly. + + * "git subtree" (in contrib/) had one codepath with loose error + checks to lose data at the remote side. + + * "git log --ancestry-path A...B" did not work as expected, as it did + not pay attention to the fact that the merge base between A and B + was the bottom of the range being specified. + + * "git diff -c -p" was not showing a deleted line from a hunk when + another hunk immediately begins where the earlier one ends. + + * "git merge @{-1}~22" was rewritten to "git merge frotz@{1}~22" + incorrectly when your previous branch was "frotz" (it should be + rewritten to "git merge frotz~22" instead). + + * "git commit --allow-empty-message -m ''" should not start an + editor. + + * "git push --[no-]verify" was not documented. + + * An entry for "file://" scheme in the enumeration of URL types Git + can take in the HTML documentation was made into a clickable link + by mistake. + + * zsh prompt script that borrowed from bash prompt script did not + work due to slight differences in array variable notation between + these two shells. + + * The bash prompt code (in contrib/) displayed the name of the branch + being rebased when "rebase -i/-m/-p" modes are in use, but not the + plain vanilla "rebase". + + * "git push $there HEAD:branch" did not resolve HEAD early enough, so + it was easy to flip it around while push is still going on and push + out a branch that the user did not originally intended when the + command was started. + + * "difftool --dir-diff" did not copy back changes made by the + end-user in the diff tool backend to the working tree in some + cases. diff --git a/Documentation/RelNotes/1.8.3.3.txt b/Documentation/RelNotes/1.8.3.3.txt new file mode 100644 index 0000000000..58a570ef3d --- /dev/null +++ b/Documentation/RelNotes/1.8.3.3.txt @@ -0,0 +1,11 @@ +Git v1.8.3.3 Release Notes +========================== + +Fixes since v1.8.3.2 +-------------------- + + * Mac OS X does not like to write(2) more than INT_MAX number of + bytes; work it around by chopping write(2) into smaller pieces. + + * Newer MacOS X encourages the programs to compile and link with + their CommonCrypto, not with OpenSSL. diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 104579dc75..b8a9b86375 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -480,7 +480,7 @@ endif::git-format-patch[] --ignore-submodules[=<when>]:: Ignore changes to submodules in the diff generation. <when> can be - either "none", "untracked", "dirty" or "all", which is the default + either "none", "untracked", "dirty" or "all", which is the default. Using "none" will consider the submodule modified when it either contains untracked or modified files or its HEAD differs from the commit recorded in the superproject and can be used to override any settings of the diff --git a/Documentation/git-check-ignore.txt b/Documentation/git-check-ignore.txt index 854e4d0c42..7f5601bda5 100644 --- a/Documentation/git-check-ignore.txt +++ b/Documentation/git-check-ignore.txt @@ -82,7 +82,7 @@ SEE ALSO -------- linkgit:gitignore[5] linkgit:gitconfig[5] -linkgit:git-ls-files[5] +linkgit:git-ls-files[1] GIT --- diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 23a9413525..ca118ac6bf 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -131,9 +131,9 @@ entries; instead, unmerged entries are ignored. "--track" in linkgit:git-branch[1] for details. + If no '-b' option is given, the name of the new branch will be -derived from the remote-tracking branch. If "remotes/" or "refs/remotes/" -is prefixed it is stripped away, and then the part up to the -next slash (which would be the nickname of the remote) is removed. +derived from the remote-tracking branch, by looking at the local part of +the refspec configured for the corresponding remote, and then stripping +the initial part up to the "*". This would tell us to use "hack" as the local branch when branching off of "origin/hack" (or "remotes/origin/hack", or even "refs/remotes/origin/hack"). If the given name has no slash, or the above diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index d88a6fcb29..606f00c3b8 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -82,7 +82,7 @@ OPTIONS --get:: Get the value for a given key (optionally filtered by a regex matching the value). Returns error code 1 if the key was not - found and error code 2 if multiple key values were found. + found and the last value if multiple key values were found. --get-all:: Like get, but does not fail if the number of values for the key diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index d51481394c..df5be268ba 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -11,7 +11,7 @@ SYNOPSIS [verse] 'git push' [--all | --mirror | --tags] [--follow-tags] [-n | --dry-run] [--receive-pack=<git-receive-pack>] [--repo=<repository>] [-f | --force] [--prune] [-v | --verbose] [-u | --set-upstream] - [<repository> [<refspec>...]] + [--no-verify] [<repository> [<refspec>...]] DESCRIPTION ----------- @@ -195,6 +195,11 @@ useful if you write an alias or script around 'git push'. be pushed. If on-demand was not able to push all necessary revisions it will also be aborted and exit with non-zero status. +--[no-]verify:: + Toggle the pre-push hook (see linkgit:githooks[5]). The + default is \--verify, giving the hook a chance to prevent the + push. With \--no-verify, the hook is bypassed completely. + include::urls-remotes.txt[] diff --git a/Documentation/git.txt b/Documentation/git.txt index 9e302b0a60..0c3dd1e40c 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -43,6 +43,13 @@ unreleased) version of Git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: +* link:v1.8.3.2/git.html[documentation for release 1.8.3.2] + +* release notes for + link:RelNotes/1.8.3.2.txt[1.8.3.2], + link:RelNotes/1.8.3.1.txt[1.8.3.1], + link:RelNotes/1.8.3.txt[1.8.3]. + * link:v1.8.2.3/git.html[documentation for release 1.8.2.3] * release notes for diff --git a/Documentation/gitrepository-layout.txt b/Documentation/gitrepository-layout.txt index d6f3393c5f..aa03882ddb 100644 --- a/Documentation/gitrepository-layout.txt +++ b/Documentation/gitrepository-layout.txt @@ -211,6 +211,9 @@ shallow:: and maintained by shallow clone mechanism. See `--depth` option to linkgit:git-clone[1] and linkgit:git-fetch[1]. +modules:: + Contains the git-repositories of the submodules. + SEE ALSO -------- linkgit:git-init[1], diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index 68a18e1497..db2a74df93 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -400,12 +400,13 @@ should not be combined with other pathspec. <<def_ref,ref>> and local ref. [[def_remote_tracking_branch]]remote-tracking branch:: - A regular Git <<def_branch,branch>> that is used to follow changes from - another <<def_repository,repository>>. A remote-tracking - branch should not contain direct modifications or have local commits - made to it. A remote-tracking branch can usually be - identified as the right-hand-side <<def_ref,ref>> in a Pull: - <<def_refspec,refspec>>. + A <<def_ref,ref>> that is used to follow changes from another + <<def_repository,repository>>. It typically looks like + 'refs/remotes/foo/bar' (indicating that it tracks a branch named + 'bar' in a remote named 'foo'), and matches the right-hand-side of + a configured fetch <<def_refspec,refspec>>. A remote-tracking + branch should not contain direct modifications or have local + commits made to it. [[def_repository]]repository:: A collection of <<def_ref,refs>> together with an diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index f1a51edf47..b898e97988 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -228,8 +228,7 @@ obtained through ref discovery. The client MUST write all obj-ids which it only has shallow copies of (meaning that it does not have the parents of a commit) as 'shallow' lines so that the server is aware of the limitations of -the client's history. Clients MUST NOT mention an obj-id which -it does not know exists on the server. +the client's history. The client now sends the maximum commit history depth it wants for this transaction, which is the number of commits it wants from the diff --git a/Documentation/urls.txt b/Documentation/urls.txt index 3ca122faed..60ba300117 100644 --- a/Documentation/urls.txt +++ b/Documentation/urls.txt @@ -33,7 +33,7 @@ For local repositories, also supported by Git natively, the following syntaxes may be used: - /path/to/repo.git/ -- file:///path/to/repo.git/ +- \file:///path/to/repo.git/ ifndef::git-clone[] These two syntaxes are mostly equivalent, except when cloning, when diff --git a/GIT-VERSION-GEN b/GIT-VERSION-GEN index aa87dbfd53..45ead76e10 100755 --- a/GIT-VERSION-GEN +++ b/GIT-VERSION-GEN @@ -1,7 +1,7 @@ #!/bin/sh GVF=GIT-VERSION-FILE -DEF_VER=v1.8.3-rc3 +DEF_VER=v1.8.3.2 LF=' ' @@ -69,6 +69,9 @@ all:: # Define NO_MSGFMT_EXTENDED_OPTIONS if your implementation of msgfmt # doesn't support GNU extensions like --check and --statistics # +# Define NEEDS_CLIPPED_WRITE if your write(2) cannot write more than +# INT_MAX bytes at once (e.g. MacOS X). +# # Define HAVE_PATHS_H if you have paths.h and want to use the default PATH # it specifies. # @@ -137,6 +140,10 @@ all:: # specify your own (or DarwinPort's) include directories and # library directories by defining CFLAGS and LDFLAGS appropriately. # +# Define NO_APPLE_COMMON_CRYPTO if you are building on Darwin/Mac OS X +# and do not want to use Apple's CommonCrypto library. This allows you +# to provide your own OpenSSL library, for example from MacPorts. +# # Define BLK_SHA1 environment variable to make use of the bundled # optimized C SHA1 routine. # @@ -1054,6 +1061,11 @@ ifeq ($(uname_S),Darwin) BASIC_LDFLAGS += -L/opt/local/lib endif endif + ifndef NO_APPLE_COMMON_CRYPTO + APPLE_COMMON_CRYPTO = YesPlease + COMPAT_CFLAGS += -DAPPLE_COMMON_CRYPTO + endif + NO_REGEX = YesPlease PTHREAD_LIBS = endif @@ -1388,10 +1400,16 @@ ifdef PPC_SHA1 LIB_OBJS += ppc/sha1.o ppc/sha1ppc.o LIB_H += ppc/sha1.h else +ifdef APPLE_COMMON_CRYPTO + COMPAT_CFLAGS += -DCOMMON_DIGEST_FOR_OPENSSL + SHA1_HEADER = <CommonCrypto/CommonDigest.h> +else SHA1_HEADER = <openssl/sha.h> EXTLIBS += $(LIB_4_CRYPTO) endif endif +endif + ifdef NO_PERL_MAKEMAKER export NO_PERL_MAKEMAKER endif @@ -1466,6 +1484,11 @@ ifndef NO_MSGFMT_EXTENDED_OPTIONS MSGFMT += --check --statistics endif +ifdef NEEDS_CLIPPED_WRITE + BASIC_CFLAGS += -DNEEDS_CLIPPED_WRITE + COMPAT_OBJS += compat/clipped-write.o +endif + ifneq (,$(XDL_FAST_HASH)) BASIC_CFLAGS += -DXDL_FAST_HASH endif @@ -1 +1 @@ -Documentation/RelNotes/1.8.3.txt
\ No newline at end of file +Documentation/RelNotes/1.8.3.3.txt
\ No newline at end of file @@ -197,6 +197,21 @@ int validate_new_branchname(const char *name, struct strbuf *ref, return 1; } +static int check_tracking_branch(struct remote *remote, void *cb_data) +{ + char *tracking_branch = cb_data; + struct refspec query; + memset(&query, 0, sizeof(struct refspec)); + query.dst = tracking_branch; + return !(remote_find_tracking(remote, &query) || + prefixcmp(query.src, "refs/heads/")); +} + +static int validate_remote_tracking_branch(char *ref) +{ + return !for_each_remote(check_tracking_branch, ref); +} + static const char upstream_not_branch[] = N_("Cannot setup tracking information; starting point '%s' is not a branch."); static const char upstream_missing[] = @@ -259,7 +274,7 @@ void create_branch(const char *head, case 1: /* Unique completion -- good, only if it is a real branch */ if (prefixcmp(real_ref, "refs/heads/") && - prefixcmp(real_ref, "refs/remotes/")) { + validate_remote_tracking_branch(real_ref)) { if (explicit_tracking) die(_(upstream_not_branch), start_name); else diff --git a/builtin/checkout.c b/builtin/checkout.c index 81b4419da5..f5b50e520f 100644 --- a/builtin/checkout.c +++ b/builtin/checkout.c @@ -825,38 +825,40 @@ static int git_checkout_config(const char *var, const char *value, void *cb) } struct tracking_name_data { - const char *name; - char *remote; + /* const */ char *src_ref; + char *dst_ref; + unsigned char *dst_sha1; int unique; }; -static int check_tracking_name(const char *refname, const unsigned char *sha1, - int flags, void *cb_data) +static int check_tracking_name(struct remote *remote, void *cb_data) { struct tracking_name_data *cb = cb_data; - const char *slash; - - if (prefixcmp(refname, "refs/remotes/")) - return 0; - slash = strchr(refname + 13, '/'); - if (!slash || strcmp(slash + 1, cb->name)) + struct refspec query; + memset(&query, 0, sizeof(struct refspec)); + query.src = cb->src_ref; + if (remote_find_tracking(remote, &query) || + get_sha1(query.dst, cb->dst_sha1)) return 0; - if (cb->remote) { + if (cb->dst_ref) { cb->unique = 0; return 0; } - cb->remote = xstrdup(refname); + cb->dst_ref = xstrdup(query.dst); return 0; } -static const char *unique_tracking_name(const char *name) +static const char *unique_tracking_name(const char *name, unsigned char *sha1) { - struct tracking_name_data cb_data = { NULL, NULL, 1 }; - cb_data.name = name; - for_each_ref(check_tracking_name, &cb_data); + struct tracking_name_data cb_data = { NULL, NULL, NULL, 1 }; + char src_ref[PATH_MAX]; + snprintf(src_ref, PATH_MAX, "refs/heads/%s", name); + cb_data.src_ref = src_ref; + cb_data.dst_sha1 = sha1; + for_each_remote(check_tracking_name, &cb_data); if (cb_data.unique) - return cb_data.remote; - free(cb_data.remote); + return cb_data.dst_ref; + free(cb_data.dst_ref); return NULL; } @@ -919,8 +921,8 @@ static int parse_branchname_arg(int argc, const char **argv, if (dwim_new_local_branch_ok && !check_filename(NULL, arg) && argc == 1) { - const char *remote = unique_tracking_name(arg); - if (!remote || get_sha1(remote, rev)) + const char *remote = unique_tracking_name(arg, rev); + if (!remote) return argcount; *new_branch = arg; arg = remote; diff --git a/builtin/clone.c b/builtin/clone.c index 035ab64950..dad4265989 100644 --- a/builtin/clone.c +++ b/builtin/clone.c @@ -546,8 +546,12 @@ static void update_remote_refs(const struct ref *refs, { const struct ref *rm = mapped_refs; + if (0 <= option_verbosity) + printf(_("Checking connectivity... ")); if (check_everything_connected(iterate_ref_map, 0, &rm)) die(_("remote did not send all necessary objects")); + if (0 <= option_verbosity) + printf(_("done\n")); if (refs) { write_remote_refs(mapped_refs); diff --git a/builtin/commit.c b/builtin/commit.c index d2f30d960a..1621dfcd40 100644 --- a/builtin/commit.c +++ b/builtin/commit.c @@ -107,7 +107,7 @@ static const char *cleanup_arg; static enum commit_whence whence; static int use_editor = 1, include_status = 1; -static int show_ignored_in_status; +static int show_ignored_in_status, have_option_m; static const char *only_include_assumed; static struct strbuf message = STRBUF_INIT; @@ -121,9 +121,11 @@ static enum { static int opt_parse_m(const struct option *opt, const char *arg, int unset) { struct strbuf *buf = opt->value; - if (unset) + if (unset) { + have_option_m = 0; strbuf_setlen(buf, 0); - else { + } else { + have_option_m = 1; if (buf->len) strbuf_addch(buf, '\n'); strbuf_addstr(buf, arg); @@ -975,7 +977,7 @@ static int parse_and_validate_options(int argc, const char *argv[], if (force_author && renew_authorship) die(_("Using both --reset-author and --author does not make sense")); - if (logfile || message.len || use_message || fixup_message) + if (logfile || have_option_m || use_message || fixup_message) use_editor = 0; if (0 <= edit_flag) use_editor = edit_flag; diff --git a/builtin/config.c b/builtin/config.c index 33c9bf9d84..19ffcaf187 100644 --- a/builtin/config.c +++ b/builtin/config.c @@ -379,8 +379,8 @@ int cmd_config(int argc, const char **argv, const char *prefix) */ die("$HOME not set"); - if (access_or_warn(user_config, R_OK) && - xdg_config && !access_or_warn(xdg_config, R_OK)) + if (access_or_warn(user_config, R_OK, 0) && + xdg_config && !access_or_warn(xdg_config, R_OK, 0)) given_config_file = xdg_config; else given_config_file = user_config; diff --git a/builtin/push.c b/builtin/push.c index 909c34dfda..2d84d10720 100644 --- a/builtin/push.c +++ b/builtin/push.c @@ -113,17 +113,19 @@ static NORETURN int die_push_simple(struct branch *branch, struct remote *remote remote->name, branch->name, advice_maybe); } +static const char message_detached_head_die[] = + N_("You are not currently on a branch.\n" + "To push the history leading to the current (detached HEAD)\n" + "state now, use\n" + "\n" + " git push %s HEAD:<name-of-remote-branch>\n"); + static void setup_push_upstream(struct remote *remote, int simple) { struct strbuf refspec = STRBUF_INIT; struct branch *branch = branch_get(NULL); if (!branch) - die(_("You are not currently on a branch.\n" - "To push the history leading to the current (detached HEAD)\n" - "state now, use\n" - "\n" - " git push %s HEAD:<name-of-remote-branch>\n"), - remote->name); + die(_(message_detached_head_die), remote->name); if (!branch->merge_nr || !branch->merge || !branch->remote_name) die(_("The current branch %s has no upstream branch.\n" "To push the current branch and set the remote as upstream, use\n" @@ -173,6 +175,8 @@ static void warn_unspecified_push_default_configuration(void) static void setup_default_push_refspecs(struct remote *remote) { + struct branch *branch; + switch (push_default) { default: case PUSH_DEFAULT_UNSPECIFIED: @@ -192,7 +196,10 @@ static void setup_default_push_refspecs(struct remote *remote) break; case PUSH_DEFAULT_CURRENT: - add_refspec("HEAD"); + branch = branch_get(NULL); + if (!branch) + die(_(message_detached_head_die), remote->name); + add_refspec(branch->name); break; case PUSH_DEFAULT_NOTHING: diff --git a/combine-diff.c b/combine-diff.c index 77d7872aaf..6dc06093d3 100644 --- a/combine-diff.c +++ b/combine-diff.c @@ -518,8 +518,11 @@ static int give_context(struct sline *sline, unsigned long cnt, int num_parent) unsigned long k; /* Paint a few lines before the first interesting line. */ - while (j < i) - sline[j++].flag |= mark | no_pre_delete; + while (j < i) { + if (!(sline[j].flag & mark)) + sline[j].flag |= no_pre_delete; + sline[j++].flag |= mark; + } again: /* we know up to i is to be included. where does the @@ -1302,6 +1305,7 @@ void diff_tree_combined(const unsigned char *sha1, int i, num_paths, needsep, show_log_first, num_parent = parents->nr; diffopts = *opt; + diff_tree_setup_paths(diffopts.pathspec.raw, &diffopts); diffopts.output_format = DIFF_FORMAT_NO_OUTPUT; DIFF_OPT_SET(&diffopts, RECURSIVE); DIFF_OPT_CLR(&diffopts, ALLOW_EXTERNAL); @@ -1372,6 +1376,8 @@ void diff_tree_combined(const unsigned char *sha1, paths = paths->next; free(tmp); } + + diff_tree_release_paths(&diffopts); } void diff_tree_combined_merge(const struct commit *commit, int dense, @@ -176,6 +176,8 @@ extern int for_each_commit_graft(each_commit_graft_fn, void *); extern int is_repository_shallow(void); extern struct commit_list *get_shallow_commits(struct object_array *heads, int depth, int shallow_flag, int not_shallow_flag); +extern void check_shallow_file_for_update(void); +extern void set_alternate_shallow_file(const char *path); int is_descendant_of(struct commit *, struct commit_list *); int in_merge_bases(struct commit *, struct commit *); diff --git a/compat/clipped-write.c b/compat/clipped-write.c new file mode 100644 index 0000000000..b8f98ff77f --- /dev/null +++ b/compat/clipped-write.c @@ -0,0 +1,13 @@ +#include "../git-compat-util.h" +#undef write + +/* + * Version of write that will write at most INT_MAX bytes. + * Workaround a xnu bug on Mac OS X + */ +ssize_t clipped_write(int fildes, const void *buf, size_t nbyte) +{ + if (nbyte > INT_MAX) + nbyte = INT_MAX; + return write(fildes, buf, nbyte); +} diff --git a/compat/mingw.c b/compat/mingw.c index b673625580..dae30a081c 100644 --- a/compat/mingw.c +++ b/compat/mingw.c @@ -1677,14 +1677,16 @@ int sigaction(int sig, struct sigaction *in, struct sigaction *out) #undef signal sig_handler_t mingw_signal(int sig, sig_handler_t handler) { - sig_handler_t old = timer_fn; + sig_handler_t old; switch (sig) { case SIGALRM: + old = timer_fn; timer_fn = handler; break; case SIGINT: + old = sigint_fn; sigint_fn = handler; break; @@ -58,7 +58,7 @@ static int handle_path_include(const char *path, struct config_include_data *inc path = buf.buf; } - if (!access_or_die(path, R_OK)) { + if (!access_or_die(path, R_OK, 0)) { if (++inc->depth > MAX_INCLUDE_DEPTH) die(include_depth_advice, MAX_INCLUDE_DEPTH, path, cf && cf->name ? cf->name : "the command line"); @@ -954,23 +954,23 @@ int git_config_early(config_fn_t fn, void *data, const char *repo_config) home_config_paths(&user_config, &xdg_config, "config"); - if (git_config_system() && !access_or_die(git_etc_gitconfig(), R_OK)) { + if (git_config_system() && !access_or_die(git_etc_gitconfig(), R_OK, 0)) { ret += git_config_from_file(fn, git_etc_gitconfig(), data); found += 1; } - if (xdg_config && !access_or_die(xdg_config, R_OK)) { + if (xdg_config && !access_or_die(xdg_config, R_OK, ACCESS_EACCES_OK)) { ret += git_config_from_file(fn, xdg_config, data); found += 1; } - if (user_config && !access_or_die(user_config, R_OK)) { + if (user_config && !access_or_die(user_config, R_OK, ACCESS_EACCES_OK)) { ret += git_config_from_file(fn, user_config, data); found += 1; } - if (repo_config && !access_or_die(repo_config, R_OK)) { + if (repo_config && !access_or_die(repo_config, R_OK, 0)) { ret += git_config_from_file(fn, repo_config, data); found += 1; } diff --git a/config.mak.uname b/config.mak.uname index d78fd3df5b..174703b67c 100644 --- a/config.mak.uname +++ b/config.mak.uname @@ -95,6 +95,7 @@ ifeq ($(uname_S),Darwin) NO_MEMMEM = YesPlease USE_ST_TIMESPEC = YesPlease HAVE_DEV_TTY = YesPlease + NEEDS_CLIPPED_WRITE = YesPlease COMPAT_OBJS += compat/precompose_utf8.o BASIC_CFLAGS += -DPRECOMPOSE_UNICODE endif diff --git a/configure.ac b/configure.ac index f3462d9c81..2f433939dc 100644 --- a/configure.ac +++ b/configure.ac @@ -193,7 +193,7 @@ AC_ARG_ENABLE([pthreads], [FLAGS is the value to pass to the compiler to enable POSIX Threads.] [The default if FLAGS is not specified is to try first -pthread] [and then -lpthread.] - [--without-pthreads will disable threading.])], + [--disable-pthreads will disable threading.])], [ if test "x$enableval" = "xyes"; then AC_MSG_NOTICE([Will try -pthread then -lpthread to enable POSIX Threads]) diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index 1c35eef56a..ecf58e0328 100644 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -1246,7 +1246,7 @@ __git_diff_common_options="--stat --numstat --shortstat --summary --no-prefix --src-prefix= --dst-prefix= --inter-hunk-context= --patience --histogram --minimal - --raw + --raw --word-diff --dirstat --dirstat= --dirstat-by-file --dirstat-by-file= --cumulative --diff-algorithm= diff --git a/contrib/completion/git-prompt.sh b/contrib/completion/git-prompt.sh index eaf5c369aa..54e48299ae 100644 --- a/contrib/completion/git-prompt.sh +++ b/contrib/completion/git-prompt.sh @@ -124,7 +124,7 @@ __git_ps1_show_upstream () fi ;; svn-remote.*.url) - svn_remote[ $((${#svn_remote[@]} + 1)) ]="$value" + svn_remote[$((${#svn_remote[@]} + 1))]="$value" svn_url_pattern+="\\|$value" upstream=svn+git # default upstream is SVN if available, else git ;; @@ -146,10 +146,11 @@ __git_ps1_show_upstream () svn*) # get the upstream from the "git-svn-id: ..." in a commit message # (git-svn uses essentially the same procedure internally) - local svn_upstream=($(git log --first-parent -1 \ + local -a svn_upstream + svn_upstream=($(git log --first-parent -1 \ --grep="^git-svn-id: \(${svn_url_pattern#??}\)" 2>/dev/null)) if [[ 0 -ne ${#svn_upstream[@]} ]]; then - svn_upstream=${svn_upstream[ ${#svn_upstream[@]} - 2 ]} + svn_upstream=${svn_upstream[${#svn_upstream[@]} - 2]} svn_upstream=${svn_upstream%@*} local n_stop="${#svn_remote[@]}" for ((n=1; n <= n_stop; n++)); do @@ -279,6 +280,7 @@ __git_ps1 () step=$(cat "$g/rebase-apply/next") total=$(cat "$g/rebase-apply/last") if [ -f "$g/rebase-apply/rebasing" ]; then + b="$(cat "$g/rebase-apply/head-name")" r="|REBASE" elif [ -f "$g/rebase-apply/applying" ]; then r="|AM" @@ -295,6 +297,7 @@ __git_ps1 () r="|BISECTING" fi + test -n "$b" || b="$(git symbolic-ref HEAD 2>/dev/null)" || { detached=yes b="$( diff --git a/contrib/subtree/git-subtree.sh b/contrib/subtree/git-subtree.sh index 8a23f58ba0..10daa8b0eb 100755 --- a/contrib/subtree/git-subtree.sh +++ b/contrib/subtree/git-subtree.sh @@ -715,7 +715,8 @@ cmd_push() repository=$1 refspec=$2 echo "git push using: " $repository $refspec - git push $repository $(git subtree split --prefix=$prefix):refs/heads/$refspec + localrev=$(git subtree split --prefix="$prefix") || die + git push $repository $localrev:refs/heads/$refspec else die "'$dir' must already exist. Try 'git subtree add'." fi @@ -821,6 +821,9 @@ static void prep_exclude(struct dir_struct *dir, const char *base, int baselen) dir->basebuf, stk->baselen - 1, dir->basebuf + current, &dt); dir->basebuf[stk->baselen - 1] = '/'; + if (dir->exclude && + dir->exclude->flags & EXC_FLAG_NEGATIVE) + dir->exclude = NULL; if (dir->exclude) { dir->basebuf[stk->baselen] = 0; dir->exclude_stack = stk; @@ -1542,9 +1545,9 @@ void setup_standard_excludes(struct dir_struct *dir) home_config_paths(NULL, &xdg_path, "ignore"); excludes_file = xdg_path; } - if (!access_or_warn(path, R_OK)) + if (!access_or_warn(path, R_OK, 0)) add_excludes_from_file(dir, path); - if (excludes_file && !access_or_warn(excludes_file, R_OK)) + if (excludes_file && !access_or_warn(excludes_file, R_OK, 0)) add_excludes_from_file(dir, excludes_file); } diff --git a/fetch-pack.c b/fetch-pack.c index f156dd4fac..6b5467c6de 100644 --- a/fetch-pack.c +++ b/fetch-pack.c @@ -20,6 +20,8 @@ static int no_done; static int fetch_fsck_objects = -1; static int transfer_fsck_objects = -1; static int agent_supported; +static struct lock_file shallow_lock; +static const char *alternate_shallow_file; #define COMPLETE (1U << 0) #define COMMON (1U << 1) @@ -683,7 +685,7 @@ static int get_pack(struct fetch_pack_args *args, int xd[2], char **pack_lockfile) { struct async demux; - const char *argv[20]; + const char *argv[22]; char keep_arg[256]; char hdr_arg[256]; const char **av; @@ -724,6 +726,11 @@ static int get_pack(struct fetch_pack_args *args, do_keep = 1; } + if (alternate_shallow_file) { + *av++ = "--shallow-file"; + *av++ = alternate_shallow_file; + } + if (do_keep) { if (pack_lockfile) cmd.out = -1; @@ -779,6 +786,27 @@ static int cmp_ref_by_name(const void *a_, const void *b_) return strcmp(a->name, b->name); } +static void setup_alternate_shallow(void) +{ + struct strbuf sb = STRBUF_INIT; + int fd; + + check_shallow_file_for_update(); + fd = hold_lock_file_for_update(&shallow_lock, git_path("shallow"), + LOCK_DIE_ON_ERROR); + if (write_shallow_commits(&sb, 0)) { + if (write_in_full(fd, sb.buf, sb.len) != sb.len) + die_errno("failed to write to %s", shallow_lock.filename); + alternate_shallow_file = shallow_lock.filename; + } else + /* + * is_repository_shallow() sees empty string as "no + * shallow file". + */ + alternate_shallow_file = ""; + strbuf_release(&sb); +} + static struct ref *do_fetch_pack(struct fetch_pack_args *args, int fd[2], const struct ref *orig_ref, @@ -858,6 +886,8 @@ static struct ref *do_fetch_pack(struct fetch_pack_args *args, if (args->stateless_rpc) packet_flush(fd[1]); + if (args->depth > 0) + setup_alternate_shallow(); if (get_pack(args, fd, pack_lockfile)) die("git fetch-pack: fetch failed."); @@ -936,15 +966,9 @@ struct ref *fetch_pack(struct fetch_pack_args *args, struct ref **sought, int nr_sought, char **pack_lockfile) { - struct stat st; struct ref *ref_cpy; fetch_pack_setup(); - if (args->depth > 0) { - if (stat(git_path("shallow"), &st)) - st.st_mtime = 0; - } - if (nr_sought) nr_sought = remove_duplicates_in_refs(sought, nr_sought); @@ -954,35 +978,12 @@ struct ref *fetch_pack(struct fetch_pack_args *args, } ref_cpy = do_fetch_pack(args, fd, ref, sought, nr_sought, pack_lockfile); - if (args->depth > 0) { - static struct lock_file lock; - struct cache_time mtime; - struct strbuf sb = STRBUF_INIT; - char *shallow = git_path("shallow"); - int fd; - - mtime.sec = st.st_mtime; - mtime.nsec = ST_MTIME_NSEC(st); - if (stat(shallow, &st)) { - if (mtime.sec) - die("shallow file was removed during fetch"); - } else if (st.st_mtime != mtime.sec -#ifdef USE_NSEC - || ST_MTIME_NSEC(st) != mtime.nsec -#endif - ) - die("shallow file was changed during fetch"); - - fd = hold_lock_file_for_update(&lock, shallow, - LOCK_DIE_ON_ERROR); - if (!write_shallow_commits(&sb, 0) - || write_in_full(fd, sb.buf, sb.len) != sb.len) { - unlink_or_warn(shallow); - rollback_lock_file(&lock); - } else { - commit_lock_file(&lock); - } - strbuf_release(&sb); + if (alternate_shallow_file) { + if (*alternate_shallow_file == '\0') { /* --unshallow */ + unlink_or_warn(git_path("shallow")); + rollback_lock_file(&shallow_lock); + } else + commit_lock_file(&shallow_lock); } reprepare_packed_git(); diff --git a/git-compat-util.h b/git-compat-util.h index e955bb5e8b..660b7f012a 100644 --- a/git-compat-util.h +++ b/git-compat-util.h @@ -185,6 +185,11 @@ int get_st_mode_bits(const char *path, int *mode); #define probe_utf8_pathname_composition(a,b) #endif +#ifdef NEEDS_CLIPPED_WRITE +ssize_t clipped_write(int fildes, const void *buf, size_t nbyte); +#define write(x,y,z) clipped_write((x),(y),(z)) +#endif + #ifdef MKDIR_WO_TRAILING_SLASH #define mkdir(a,b) compat_mkdir_wo_trailing_slash((a),(b)) extern int compat_mkdir_wo_trailing_slash(const char*, mode_t); @@ -692,8 +697,9 @@ int remove_or_warn(unsigned int mode, const char *path); * Call access(2), but warn for any error except "missing file" * (ENOENT or ENOTDIR). */ -int access_or_warn(const char *path, int mode); -int access_or_die(const char *path, int mode); +#define ACCESS_EACCES_OK (1U << 0) +int access_or_warn(const char *path, int mode, unsigned flag); +int access_or_die(const char *path, int mode, unsigned flag); /* Warn on an inaccessible file that ought to be accessible */ void warn_on_inaccessible(const char *path); diff --git a/git-difftool.perl b/git-difftool.perl index 8a75205537..e57d3d1295 100755 --- a/git-difftool.perl +++ b/git-difftool.perl @@ -85,13 +85,9 @@ sub exit_cleanup sub use_wt_file { - my ($repo, $workdir, $file, $sha1, $symlinks) = @_; + my ($repo, $workdir, $file, $sha1) = @_; my $null_sha1 = '0' x 40; - if ($sha1 ne $null_sha1 and not $symlinks) { - return 0; - } - if (! -e "$workdir/$file") { # If the file doesn't exist in the working tree, we cannot # use it. @@ -213,8 +209,7 @@ EOF if ($rmode ne $null_mode) { my ($use, $wt_sha1) = use_wt_file($repo, $workdir, - $dst_path, $rsha1, - $symlinks); + $dst_path, $rsha1); if ($use) { push @working_tree, $dst_path; $wtindex .= "$rmode $wt_sha1\t$dst_path\0"; @@ -4,6 +4,7 @@ #include "help.h" #include "quote.h" #include "run-command.h" +#include "commit.h" const char git_usage_string[] = "git [--version] [--help] [-c name=value]\n" @@ -146,6 +147,12 @@ static int handle_options(const char ***argv, int *argc, int *envchanged) setenv(GIT_LITERAL_PATHSPECS_ENVIRONMENT, "0", 1); if (envchanged) *envchanged = 1; + } else if (!strcmp(cmd, "--shallow-file")) { + (*argv)++; + (*argc)--; + set_alternate_shallow_file((*argv)[0]); + if (envchanged) + *envchanged = 1; } else { fprintf(stderr, "Unknown option: %s\n", cmd); usage(git_usage_string); diff --git a/imap-send.c b/imap-send.c index d9bcfb44dc..d6b65e204c 100644 --- a/imap-send.c +++ b/imap-send.c @@ -29,8 +29,18 @@ #ifdef NO_OPENSSL typedef void *SSL; #else +#ifdef APPLE_COMMON_CRYPTO +#include <CommonCrypto/CommonHMAC.h> +#define HMAC_CTX CCHmacContext +#define HMAC_Init(hmac, key, len, algo) CCHmacInit(hmac, algo, key, len) +#define HMAC_Update CCHmacUpdate +#define HMAC_Final(hmac, hash, ptr) CCHmacFinal(hmac, hash) +#define HMAC_CTX_cleanup(ignore) +#define EVP_md5() kCCHmacAlgMD5 +#else #include <openssl/evp.h> #include <openssl/hmac.h> +#endif #include <openssl/x509v3.h> #endif diff --git a/revision.c b/revision.c index a67b615bfc..7f7a8ab7cb 100644 --- a/revision.c +++ b/revision.c @@ -915,6 +915,19 @@ static void add_rev_cmdline(struct rev_info *revs, info->nr++; } +static void add_rev_cmdline_list(struct rev_info *revs, + struct commit_list *commit_list, + int whence, + unsigned flags) +{ + while (commit_list) { + struct object *object = &commit_list->item->object; + add_rev_cmdline(revs, object, sha1_to_hex(object->sha1), + whence, flags); + commit_list = commit_list->next; + } +} + struct all_refs_cb { int all_flags; int warned_bad_reflog; @@ -1092,6 +1105,7 @@ static void prepare_show_merge(struct rev_info *revs) add_pending_object(revs, &head->object, "HEAD"); add_pending_object(revs, &other->object, "MERGE_HEAD"); bases = get_merge_bases(head, other, 1); + add_rev_cmdline_list(revs, bases, REV_CMD_MERGE_BASE, UNINTERESTING); add_pending_commit_list(revs, bases, UNINTERESTING); free_commit_list(bases); head->object.flags |= SYMMETRIC_LEFT; @@ -1179,6 +1193,9 @@ int handle_revision_arg(const char *arg_, struct rev_info *revs, int flags, unsi if (symmetric) { exclude = get_merge_bases(a, b, 1); + add_rev_cmdline_list(revs, exclude, + REV_CMD_MERGE_BASE, + flags_exclude); add_pending_commit_list(revs, exclude, flags_exclude); free_commit_list(exclude); diff --git a/revision.h b/revision.h index 01bd2b7c07..878a5556fd 100644 --- a/revision.h +++ b/revision.h @@ -35,6 +35,7 @@ struct rev_cmdline_info { REV_CMD_PARENTS_ONLY, REV_CMD_LEFT, REV_CMD_RIGHT, + REV_CMD_MERGE_BASE, REV_CMD_REV } whence; unsigned flags; diff --git a/sha1_file.c b/sha1_file.c index 67e815b2db..b114cc922d 100644 --- a/sha1_file.c +++ b/sha1_file.c @@ -2138,7 +2138,7 @@ void *unpack_entry(struct packed_git *p, off_t obj_offset, if (!data) die("failed to apply delta"); - free (delta_data); + free(delta_data); } *final_type = type; diff --git a/sha1_name.c b/sha1_name.c index 3820f28ae7..b3a90e6f05 100644 --- a/sha1_name.c +++ b/sha1_name.c @@ -517,12 +517,21 @@ static int get_sha1_basic(const char *str, int len, unsigned char *sha1) } if (read_ref_at(real_ref, at_time, nth, sha1, NULL, &co_time, &co_tz, &co_cnt)) { + if (!len) { + if (!prefixcmp(real_ref, "refs/heads/")) { + str = real_ref + 11; + len = strlen(real_ref + 11); + } else { + /* detached HEAD */ + str = "HEAD"; + len = 4; + } + } if (at_time) warning("Log for '%.*s' only goes " "back to %s.", len, str, show_date(co_time, co_tz, DATE_RFC2822)); else { - free(real_ref); die("Log for '%.*s' only has %d entries.", len, str, co_cnt); } @@ -1033,14 +1042,15 @@ int interpret_branch_name(const char *name, struct strbuf *buf) * points to something different than a branch. */ if (!upstream) - return error(_("HEAD does not point to a branch")); + die(_("HEAD does not point to a branch")); if (!upstream->merge || !upstream->merge[0]->dst) { if (!ref_exists(upstream->refname)) - return error(_("No such branch: '%s'"), cp); - if (!upstream->merge) - return error(_("No upstream configured for branch '%s'"), - upstream->name); - return error( + die(_("No such branch: '%s'"), cp); + if (!upstream->merge) { + die(_("No upstream configured for branch '%s'"), + upstream->name); + } + die( _("Upstream branch '%s' not stored as a remote-tracking branch"), upstream->merge[0]->src); } @@ -1055,9 +1065,13 @@ int interpret_branch_name(const char *name, struct strbuf *buf) int strbuf_branchname(struct strbuf *sb, const char *name) { int len = strlen(name); - if (interpret_branch_name(name, sb) == len) + int used = interpret_branch_name(name, sb); + + if (used == len) return 0; - strbuf_add(sb, name, len); + if (used < 0) + used = 0; + strbuf_add(sb, name + used, len - used); return len; } @@ -3,6 +3,16 @@ #include "tag.h" static int is_shallow = -1; +static struct stat shallow_stat; +static char *alternate_shallow_file; + +void set_alternate_shallow_file(const char *path) +{ + if (is_shallow != -1) + die("BUG: is_repository_shallow must not be called before set_alternate_shallow_file"); + free(alternate_shallow_file); + alternate_shallow_file = path ? xstrdup(path) : NULL; +} int register_shallow(const unsigned char *sha1) { @@ -21,12 +31,21 @@ int is_repository_shallow(void) { FILE *fp; char buf[1024]; + const char *path = alternate_shallow_file; if (is_shallow >= 0) return is_shallow; - fp = fopen(git_path("shallow"), "r"); - if (!fp) { + if (!path) + path = git_path("shallow"); + /* + * fetch-pack sets '--shallow-file ""' as an indicator that no + * shallow file should be used. We could just open it and it + * will likely fail. But let's do an explicit check instead. + */ + if (!*path || + stat(path, &shallow_stat) || + (fp = fopen(path, "r")) == NULL) { is_shallow = 0; return is_shallow; } @@ -108,3 +127,22 @@ struct commit_list *get_shallow_commits(struct object_array *heads, int depth, return result; } + +void check_shallow_file_for_update(void) +{ + struct stat st; + + if (!is_shallow) + return; + else if (is_shallow == -1) + die("BUG: shallow must be initialized by now"); + + if (stat(git_path("shallow"), &st)) + die("shallow file was removed during fetch"); + else if (st.st_mtime != shallow_stat.st_mtime +#ifdef USE_NSEC + || ST_MTIME_NSEC(st) != ST_MTIME_NSEC(shallow_stat) +#endif + ) + die("shallow file was changed during fetch"); +} diff --git a/submodule.c b/submodule.c index e728025f60..1821a5b316 100644 --- a/submodule.c +++ b/submodule.c @@ -603,9 +603,8 @@ int fetch_populated_submodules(const struct argv_array *options, if (!work_tree) goto out; - if (!the_index.initialized) - if (read_cache() < 0) - die("index file corrupt"); + if (read_cache() < 0) + die("index file corrupt"); argv_array_push(&argv, "fetch"); for (i = 0; i < options->argc; i++) @@ -324,6 +324,9 @@ Don't: use 'test_must_fail git cmd'. This will signal a failure if git dies in an unexpected way (e.g. segfault). + On the other hand, don't use test_must_fail for running regular + platform commands; just use '! cmd'. + - use perl without spelling it as "$PERL_PATH". This is to help our friends on Windows where the platform Perl often adds CR before the end of line, and they bundle Git with a version of Perl that diff --git a/t/lib-rebase.sh b/t/lib-rebase.sh index 6ccf797091..8098a88c82 100644 --- a/t/lib-rebase.sh +++ b/t/lib-rebase.sh @@ -17,6 +17,8 @@ # ("squash", "fixup", "edit", or "reword") and the SHA1 taken # from the specified line. # +# "exec_cmd_with_args" -- add an "exec cmd with args" line. +# # "#" -- Add a comment line. # # ">" -- Add a blank line. diff --git a/t/t0070-fundamental.sh b/t/t0070-fundamental.sh index da2c504e53..986b2a8f26 100755 --- a/t/t0070-fundamental.sh +++ b/t/t0070-fundamental.sh @@ -17,7 +17,7 @@ test_expect_success 'mktemp to nonexistent directory prints filename' ' grep "doesnotexist/test" err ' -test_expect_success POSIXPERM 'mktemp to unwritable directory prints filename' ' +test_expect_success POSIXPERM,SANITY 'mktemp to unwritable directory prints filename' ' mkdir cannotwrite && chmod -w cannotwrite && test_when_finished "chmod +w cannotwrite" && diff --git a/t/t0100-previous.sh b/t/t0100-previous.sh index 315b9b3f10..e0a6940232 100755 --- a/t/t0100-previous.sh +++ b/t/t0100-previous.sh @@ -27,6 +27,7 @@ test_expect_success 'merge @{-1}' ' test_commit B && git checkout A && test_commit C && + test_commit D && git branch -f master B && git branch -f other && git checkout other && @@ -35,14 +36,24 @@ test_expect_success 'merge @{-1}' ' git cat-file commit HEAD | grep "Merge branch '\''other'\''" ' -test_expect_success 'merge @{-1} when there is not enough switches yet' ' +test_expect_success 'merge @{-1}~1' ' + git checkout master && + git reset --hard B && + git checkout other && + git checkout master && + git merge @{-1}~1 && + git cat-file commit HEAD >actual && + grep "Merge branch '\''other'\''" actual +' + +test_expect_success 'merge @{-100} before checking out that many branches yet' ' git reflog expire --expire=now && git checkout -f master && git reset --hard B && git branch -f other C && git checkout other && git checkout master && - test_must_fail git merge @{-12} + test_must_fail git merge @{-100} ' test_done diff --git a/t/t1507-rev-parse-upstream.sh b/t/t1507-rev-parse-upstream.sh index b27a7209f7..2a19e797eb 100755 --- a/t/t1507-rev-parse-upstream.sh +++ b/t/t1507-rev-parse-upstream.sh @@ -129,8 +129,7 @@ test_expect_success 'branch@{u} works when tracking a local branch' ' test_expect_success 'branch@{u} error message when no upstream' ' cat >expect <<-EOF && - error: No upstream configured for branch ${sq}non-tracking${sq} - fatal: Needed a single revision + fatal: No upstream configured for branch ${sq}non-tracking${sq} EOF error_message non-tracking@{u} 2>actual && test_i18ncmp expect actual @@ -138,8 +137,7 @@ test_expect_success 'branch@{u} error message when no upstream' ' test_expect_success '@{u} error message when no upstream' ' cat >expect <<-EOF && - error: No upstream configured for branch ${sq}master${sq} - fatal: Needed a single revision + fatal: No upstream configured for branch ${sq}master${sq} EOF test_must_fail git rev-parse --verify @{u} 2>actual && test_i18ncmp expect actual @@ -147,8 +145,7 @@ test_expect_success '@{u} error message when no upstream' ' test_expect_success 'branch@{u} error message with misspelt branch' ' cat >expect <<-EOF && - error: No such branch: ${sq}no-such-branch${sq} - fatal: Needed a single revision + fatal: No such branch: ${sq}no-such-branch${sq} EOF error_message no-such-branch@{u} 2>actual && test_i18ncmp expect actual @@ -156,8 +153,7 @@ test_expect_success 'branch@{u} error message with misspelt branch' ' test_expect_success '@{u} error message when not on a branch' ' cat >expect <<-EOF && - error: HEAD does not point to a branch - fatal: Needed a single revision + fatal: HEAD does not point to a branch EOF git checkout HEAD^0 && test_must_fail git rev-parse --verify @{u} 2>actual && @@ -166,8 +162,7 @@ test_expect_success '@{u} error message when not on a branch' ' test_expect_success 'branch@{u} error message if upstream branch not fetched' ' cat >expect <<-EOF && - error: Upstream branch ${sq}refs/heads/side${sq} not stored as a remote-tracking branch - fatal: Needed a single revision + fatal: Upstream branch ${sq}refs/heads/side${sq} not stored as a remote-tracking branch EOF error_message bad-upstream@{u} 2>actual && test_i18ncmp expect actual diff --git a/t/t2024-checkout-dwim.sh b/t/t2024-checkout-dwim.sh new file mode 100755 index 0000000000..dee55e428f --- /dev/null +++ b/t/t2024-checkout-dwim.sh @@ -0,0 +1,167 @@ +#!/bin/sh + +test_description='checkout <branch> + +Ensures that checkout on an unborn branch does what the user expects' + +. ./test-lib.sh + +# Is the current branch "refs/heads/$1"? +test_branch () { + printf "%s\n" "refs/heads/$1" >expect.HEAD && + git symbolic-ref HEAD >actual.HEAD && + test_cmp expect.HEAD actual.HEAD +} + +# Is branch "refs/heads/$1" set to pull from "$2/$3"? +test_branch_upstream () { + printf "%s\n" "$2" "refs/heads/$3" >expect.upstream && + { + git config "branch.$1.remote" && + git config "branch.$1.merge" + } >actual.upstream && + test_cmp expect.upstream actual.upstream +} + +test_expect_success 'setup' ' + test_commit my_master && + git init repo_a && + ( + cd repo_a && + test_commit a_master && + git checkout -b foo && + test_commit a_foo && + git checkout -b bar && + test_commit a_bar + ) && + git init repo_b && + ( + cd repo_b && + test_commit b_master && + git checkout -b foo && + test_commit b_foo && + git checkout -b baz && + test_commit b_baz + ) && + git remote add repo_a repo_a && + git remote add repo_b repo_b && + git config remote.repo_b.fetch \ + "+refs/heads/*:refs/remotes/other_b/*" && + git fetch --all +' + +test_expect_success 'checkout of non-existing branch fails' ' + git checkout -B master && + test_might_fail git branch -D xyzzy && + + test_must_fail git checkout xyzzy && + test_must_fail git rev-parse --verify refs/heads/xyzzy && + test_branch master +' + +test_expect_success 'checkout of branch from multiple remotes fails #1' ' + git checkout -B master && + test_might_fail git branch -D foo && + + test_must_fail git checkout foo && + test_must_fail git rev-parse --verify refs/heads/foo && + test_branch master +' + +test_expect_success 'checkout of branch from a single remote succeeds #1' ' + git checkout -B master && + test_might_fail git branch -D bar && + + git checkout bar && + test_branch bar && + test_cmp_rev remotes/repo_a/bar HEAD && + test_branch_upstream bar repo_a bar +' + +test_expect_success 'checkout of branch from a single remote succeeds #2' ' + git checkout -B master && + test_might_fail git branch -D baz && + + git checkout baz && + test_branch baz && + test_cmp_rev remotes/other_b/baz HEAD && + test_branch_upstream baz repo_b baz +' + +test_expect_success '--no-guess suppresses branch auto-vivification' ' + git checkout -B master && + test_might_fail git branch -D bar && + + test_must_fail git checkout --no-guess bar && + test_must_fail git rev-parse --verify refs/heads/bar && + test_branch master +' + +test_expect_success 'setup more remotes with unconventional refspecs' ' + git checkout -B master && + git init repo_c && + ( + cd repo_c && + test_commit c_master && + git checkout -b bar && + test_commit c_bar + git checkout -b spam && + test_commit c_spam + ) && + git init repo_d && + ( + cd repo_d && + test_commit d_master && + git checkout -b baz && + test_commit f_baz + git checkout -b eggs && + test_commit c_eggs + ) && + git remote add repo_c repo_c && + git config remote.repo_c.fetch \ + "+refs/heads/*:refs/remotes/extra_dir/repo_c/extra_dir/*" && + git remote add repo_d repo_d && + git config remote.repo_d.fetch \ + "+refs/heads/*:refs/repo_d/*" && + git fetch --all +' + +test_expect_success 'checkout of branch from multiple remotes fails #2' ' + git checkout -B master && + test_might_fail git branch -D bar && + + test_must_fail git checkout bar && + test_must_fail git rev-parse --verify refs/heads/bar && + test_branch master +' + +test_expect_success 'checkout of branch from multiple remotes fails #3' ' + git checkout -B master && + test_might_fail git branch -D baz && + + test_must_fail git checkout baz && + test_must_fail git rev-parse --verify refs/heads/baz && + test_branch master +' + +test_expect_success 'checkout of branch from a single remote succeeds #3' ' + git checkout -B master && + test_might_fail git branch -D spam && + + git checkout spam && + test_branch spam && + test_cmp_rev refs/remotes/extra_dir/repo_c/extra_dir/spam HEAD && + test_branch_upstream spam repo_c spam +' + +test_expect_success 'checkout of branch from a single remote succeeds #4' ' + git checkout -B master && + test_might_fail git branch -D eggs && + + git checkout eggs && + test_branch eggs && + test_cmp_rev refs/repo_d/eggs HEAD && + test_branch_upstream eggs repo_d eggs +' + +test_done diff --git a/t/t3001-ls-files-others-exclude.sh b/t/t3001-ls-files-others-exclude.sh index 4e3735f0cb..f0421c09c7 100755 --- a/t/t3001-ls-files-others-exclude.sh +++ b/t/t3001-ls-files-others-exclude.sh @@ -175,6 +175,24 @@ test_expect_success 'negated exclude matches can override previous ones' ' grep "^a.1" output ' +test_expect_success 'excluded directory overrides content patterns' ' + + git ls-files --others --exclude="one" --exclude="!one/a.1" >output && + if grep "^one/a.1" output + then + false + fi +' + +test_expect_success 'negated directory doesn'\''t affect content patterns' ' + + git ls-files --others --exclude="!one" --exclude="one/a.1" >output && + if grep "^one/a.1" output + then + false + fi +' + test_expect_success 'subdirectory ignore (setup)' ' mkdir -p top/l1/l2 && ( diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index d969f0ecd8..44ec6a45f4 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -317,13 +317,13 @@ test_expect_success 'test tracking setup (non-wildcard, matching)' ' test $(git config branch.my4.merge) = refs/heads/master ' -test_expect_success 'test tracking setup (non-wildcard, not matching)' ' +test_expect_success 'tracking setup fails on non-matching refspec' ' git config remote.local.url . && git config remote.local.fetch refs/heads/s:refs/remotes/local/s && (git show-ref -q refs/remotes/local/master || git fetch local) && - git branch --track my5 local/master && - ! test "$(git config branch.my5.remote)" = local && - ! test "$(git config branch.my5.merge)" = refs/heads/master + test_must_fail git branch --track my5 local/master && + test_must_fail git config branch.my5.remote && + test_must_fail git config branch.my5.merge ' test_expect_success 'test tracking setup via config' ' diff --git a/t/t4038-diff-combined.sh b/t/t4038-diff-combined.sh index 1261dbbdf5..1019d7b35f 100755 --- a/t/t4038-diff-combined.sh +++ b/t/t4038-diff-combined.sh @@ -353,4 +353,52 @@ test_expect_failure 'combine diff coalesce three parents' ' compare_diff_patch expected actual ' +# Test for a bug reported at +# http://thread.gmane.org/gmane.comp.version-control.git/224410 +# where a delete lines were missing from combined diff output when they +# occurred exactly before the context lines of a later change. +test_expect_success 'combine diff missing delete bug' ' + git commit -m initial --allow-empty && + cat <<-\EOF >test && + 1 + 2 + 3 + 4 + EOF + git add test && + git commit -a -m side1 && + git checkout -B side1 && + git checkout HEAD^ && + cat <<-\EOF >test && + 0 + 1 + 2 + 3 + 4modified + EOF + git add test && + git commit -m side2 && + git branch -f side2 && + test_must_fail git merge --no-commit side1 && + cat <<-\EOF >test && + 1 + 2 + 3 + 4modified + EOF + git add test && + git commit -a -m merge && + git diff-tree -c -p HEAD >actual.tmp && + sed -e "1,/^@@@/d" < actual.tmp >actual && + tr -d Q <<-\EOF >expected && + - 0 + 1 + 2 + 3 + -4 + +4modified + EOF + compare_diff_patch expected actual +' + test_done diff --git a/t/t4202-log.sh b/t/t4202-log.sh index 9243a97993..cb03d28769 100755 --- a/t/t4202-log.sh +++ b/t/t4202-log.sh @@ -530,6 +530,20 @@ test_expect_success 'show added path under "--follow -M"' ' ) ' +test_expect_success 'git log -c --follow' ' + test_create_repo follow-c && + ( + cd follow-c && + test_commit initial file original && + git rm file && + test_commit rename file2 original && + git reset --hard initial && + test_commit modify file foo && + git merge -m merge rename && + git log -c --follow file2 + ) +' + cat >expect <<\EOF * commit COMMIT_OBJECT_NAME |\ Merge: MERGE_PARENTS diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index d574085696..fd2598e601 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -135,6 +135,13 @@ test_expect_success 'clone shallow depth 1' ' test "`git --git-dir=shallow0/.git rev-list --count HEAD`" = 1 ' +test_expect_success 'clone shallow depth 1 with fsck' ' + git config --global fetch.fsckobjects true && + git clone --no-single-branch --depth 1 "file://$(pwd)/." shallow0fsck && + test "`git --git-dir=shallow0fsck/.git rev-list --count HEAD`" = 1 && + git config --global --unset fetch.fsckobjects +' + test_expect_success 'clone shallow' ' git clone --no-single-branch --depth 2 "file://$(pwd)/." shallow ' @@ -373,6 +380,20 @@ test_expect_success 'clone shallow with packed refs' ' test_cmp count8.expected count8.actual ' +test_expect_success 'fetch in shallow repo unreachable shallow objects' ' + ( + git clone --bare --branch B --single-branch "file://$(pwd)/." no-reflog && + git clone --depth 1 "file://$(pwd)/no-reflog" shallow9 && + cd no-reflog && + git tag -d TAGB1 TAGB2 && + git update-ref refs/heads/B B~~ && + git gc --prune=now && + cd ../shallow9 && + git fetch origin && + git fsck --no-dangling + ) +' + test_expect_success 'setup tests for the --stdin parameter' ' for head in C D E F do diff --git a/t/t6019-rev-list-ancestry-path.sh b/t/t6019-rev-list-ancestry-path.sh index 39b4cb0ecd..dd5b0e55d2 100755 --- a/t/t6019-rev-list-ancestry-path.sh +++ b/t/t6019-rev-list-ancestry-path.sh @@ -13,6 +13,9 @@ test_description='--ancestry-path' # # D..M -- M.t == M # --ancestry-path D..M -- M.t == M +# +# F...I == F G H I +# --ancestry-path F...I == F H I . ./test-lib.sh @@ -63,13 +66,29 @@ test_expect_success 'rev-list D..M -- M.t' ' test_cmp expect actual ' -test_expect_success 'rev-list --ancestry-patch D..M -- M.t' ' +test_expect_success 'rev-list --ancestry-path D..M -- M.t' ' echo M >expect && git rev-list --ancestry-path --format=%s D..M -- M.t | sed -e "/^commit /d" >actual && test_cmp expect actual ' +test_expect_success 'rev-list F...I' ' + for c in F G H I; do echo $c; done >expect && + git rev-list --format=%s F...I | + sed -e "/^commit /d" | + sort >actual && + test_cmp expect actual +' + +test_expect_success 'rev-list --ancestry-path F...I' ' + for c in F H I; do echo $c; done >expect && + git rev-list --ancestry-path --format=%s F...I | + sed -e "/^commit /d" | + sort >actual && + test_cmp expect actual +' + # b---bc # / \ / # a X diff --git a/t/t7011-skip-worktree-reading.sh b/t/t7011-skip-worktree-reading.sh index 8f3b54d826..88d60c1ce2 100755 --- a/t/t7011-skip-worktree-reading.sh +++ b/t/t7011-skip-worktree-reading.sh @@ -91,12 +91,12 @@ test_expect_success 'update-index --remove' ' test_cmp expected 1 ' -test_expect_success 'ls-files --delete' ' +test_expect_success 'ls-files --deleted' ' setup_absent && test -z "$(git ls-files -d)" ' -test_expect_success 'ls-files --delete' ' +test_expect_success 'ls-files --deleted' ' setup_dirty && test -z "$(git ls-files -d)" ' diff --git a/t/t7201-co.sh b/t/t7201-co.sh index be9672e5a0..0c9ec0ad44 100755 --- a/t/t7201-co.sh +++ b/t/t7201-co.sh @@ -431,6 +431,7 @@ test_expect_success 'detach a symbolic link HEAD' ' test_expect_success \ 'checkout with --track fakes a sensible -b <name>' ' + git config remote.origin.fetch "+refs/heads/*:refs/remotes/origin/*" && git update-ref refs/remotes/origin/koala/bear renamer && git checkout --track origin/koala/bear && diff --git a/t/t7500-commit.sh b/t/t7500-commit.sh index 436b7b606e..bdc1f29503 100755 --- a/t/t7500-commit.sh +++ b/t/t7500-commit.sh @@ -13,9 +13,9 @@ commit_msg_is () { expect=commit_msg_is.expect actual=commit_msg_is.actual - printf "%s" "$(git log --pretty=format:%s%b -1)" >$expect && - printf "%s" "$1" >$actual && - test_i18ncmp $expect $actual + printf "%s" "$(git log --pretty=format:%s%b -1)" >"$actual" && + printf "%s" "$1" >"$expect" && + test_i18ncmp "$expect" "$actual" } # A sanity check to see if commit is working at all. diff --git a/t/t7502-commit.sh b/t/t7502-commit.sh index a4938b1e45..6313da2cdd 100755 --- a/t/t7502-commit.sh +++ b/t/t7502-commit.sh @@ -361,6 +361,23 @@ test_expect_success !AUTOIDENT 'do not fire editor when committer is bogus' ' test_cmp expect .git/result ' +test_expect_success 'do not fire editor if -m <msg> was given' ' + echo tick >file && + git add file && + echo "editor not started" >.git/result && + (GIT_EDITOR="\"$(pwd)/.git/FAKE_EDITOR\"" git commit -m tick) && + test "$(cat .git/result)" = "editor not started" +' + +test_expect_success 'do not fire editor if -m "" was given' ' + echo tock >file && + git add file && + echo "editor not started" >.git/result && + (GIT_EDITOR="\"$(pwd)/.git/FAKE_EDITOR\"" \ + git commit -m "" --allow-empty-message) && + test "$(cat .git/result)" = "editor not started" +' + test_expect_success 'do not fire editor in the presence of conflicts' ' git clean -f && diff --git a/t/t7800-difftool.sh b/t/t7800-difftool.sh index d46f0411bd..2418528487 100755 --- a/t/t7800-difftool.sh +++ b/t/t7800-difftool.sh @@ -385,6 +385,25 @@ test_expect_success PERL,SYMLINKS 'difftool --dir-diff --symlink without unstage test_cmp actual expect ' +write_script modify-right-file <<\EOF +echo "new content" >"$2/file" +EOF + +run_dir_diff_test 'difftool --dir-diff syncs worktree with unstaged change' ' + test_when_finished git reset --hard && + echo "orig content" >file && + git difftool -d $symlinks --extcmd "$(pwd)/modify-right-file" branch && + echo "new content" >expect && + test_cmp expect file +' + +run_dir_diff_test 'difftool --dir-diff syncs worktree without unstaged change' ' + test_when_finished git reset --hard && + git difftool -d $symlinks --extcmd "$(pwd)/modify-right-file" branch && + echo "new content" >expect && + test_cmp expect file +' + write_script modify-file <<\EOF echo "new content" >file EOF diff --git a/t/t9114-git-svn-dcommit-merge.sh b/t/t9114-git-svn-dcommit-merge.sh index 3077851015..f524d2f383 100755 --- a/t/t9114-git-svn-dcommit-merge.sh +++ b/t/t9114-git-svn-dcommit-merge.sh @@ -48,7 +48,7 @@ test_expect_success 'setup svn repository' ' test_expect_success 'setup git mirror and merge' ' git svn init "$svnrepo" -t tags -T trunk -b branches && git svn fetch && - git checkout --track -b svn remotes/trunk && + git checkout -b svn remotes/trunk && git checkout -b merge && echo new file > new_file && git add new_file && diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh index 083b319ed1..15521cc4f9 100755 --- a/t/t9903-bash-prompt.sh +++ b/t/t9903-bash-prompt.sh @@ -276,7 +276,7 @@ test_expect_success 'prompt - rebase merge' ' ' test_expect_success 'prompt - rebase' ' - printf " ((t2)|REBASE 1/3)" > expected && + printf " (b2|REBASE 1/3)" > expected && git checkout b2 && test_when_finished "git checkout master" && test_must_fail git rebase b1 b2 && diff --git a/templates/hooks--pre-push.sample b/templates/hooks--pre-push.sample index 15ab6d8e7e..15ab6d8e7e 100644..100755 --- a/templates/hooks--pre-push.sample +++ b/templates/hooks--pre-push.sample diff --git a/upload-pack.c b/upload-pack.c index bfa6279cc4..127e59a603 100644 --- a/upload-pack.c +++ b/upload-pack.c @@ -592,7 +592,7 @@ static void receive_needs(void) die("invalid shallow line: %s", line); object = parse_object(sha1); if (!object) - die("did not find object for %s", line); + continue; if (object->type != OBJ_COMMIT) die("invalid shallow object %s", sha1_to_hex(sha1)); if (!(object->flags & CLIENT_SHALLOW)) { @@ -408,18 +408,24 @@ void warn_on_inaccessible(const char *path) warning(_("unable to access '%s': %s"), path, strerror(errno)); } -int access_or_warn(const char *path, int mode) +static int access_error_is_ok(int err, unsigned flag) +{ + return err == ENOENT || err == ENOTDIR || + ((flag & ACCESS_EACCES_OK) && err == EACCES); +} + +int access_or_warn(const char *path, int mode, unsigned flag) { int ret = access(path, mode); - if (ret && errno != ENOENT && errno != ENOTDIR) + if (ret && !access_error_is_ok(errno, flag)) warn_on_inaccessible(path); return ret; } -int access_or_die(const char *path, int mode) +int access_or_die(const char *path, int mode, unsigned flag) { int ret = access(path, mode); - if (ret && errno != ENOENT && errno != ENOTDIR) + if (ret && !access_error_is_ok(errno, flag)) die_errno(_("unable to access '%s'"), path); return ret; } |