diff options
43 files changed, 665 insertions, 406 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index a600e35c81..ef67b53f72 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -260,9 +260,11 @@ Writing Documentation: Every user-visible change should be reflected in the documentation. The same general rule as for code applies -- imitate the existing - conventions. A few commented examples follow to provide reference - when writing or modifying command usage strings and synopsis sections - in the manual pages: + conventions. + + A few commented examples follow to provide reference when writing or + modifying command usage strings and synopsis sections in the manual + pages: Placeholders are spelled in lowercase and enclosed in angle brackets: <file> @@ -312,3 +314,29 @@ Writing Documentation: Use 'git' (all lowercase) when talking about commands i.e. something the user would type into a shell and use 'Git' (uppercase first letter) when talking about the version control system and its properties. + + A few commented examples follow to provide reference when writing or + modifying paragraphs or option/command explanations that contain options + or commands: + + Literal examples (e.g. use of command-line options, command names, and + configuration variables) are typeset in monospace, and if you can use + `backticks around word phrases`, do so. + `--pretty=oneline` + `git rev-list` + `remote.pushdefault` + + Word phrases enclosed in `backtick characters` are rendered literally + and will not be further expanded. The use of `backticks` to achieve the + previous rule means that literal examples should not use AsciiDoc + escapes. + Correct: + `--pretty=oneline` + Incorrect: + `\--pretty=oneline` + + If some place in the documentation needs to typeset a command usage + example with inline substitutions, it is fine to use +monospaced and + inline substituted text+ instead of `monospaced literal text`, and with + the former, the part that should not get substituted must be + quoted/escaped. diff --git a/Documentation/RelNotes/1.8.4.5.txt b/Documentation/RelNotes/1.8.4.5.txt new file mode 100644 index 0000000000..215bd1a7a2 --- /dev/null +++ b/Documentation/RelNotes/1.8.4.5.txt @@ -0,0 +1,13 @@ +Git v1.8.4.5 Release Notes +========================== + +Fixes since v1.8.4.4 +-------------------- + + * Recent update to remote-hg that attempted to make it work better + with non ASCII pathnames fed Unicode strings to the underlying Hg + API, which was wrong. + + * "git submodule init" copied "submodule.$name.update" settings from + .gitmodules to .git/config without making sure if the suggested + value was sensible. diff --git a/Documentation/RelNotes/1.8.5.1.txt b/Documentation/RelNotes/1.8.5.1.txt new file mode 100644 index 0000000000..7236aaf232 --- /dev/null +++ b/Documentation/RelNotes/1.8.5.1.txt @@ -0,0 +1,9 @@ +Git v1.8.5.1 Release Notes +========================== + +Fixes since v1.8.5 +------------------ + + * "git submodule init" copied "submodule.$name.update" settings from + .gitmodules to .git/config without making sure if the suggested + value was sensible. diff --git a/Documentation/RelNotes/1.8.5.2.txt b/Documentation/RelNotes/1.8.5.2.txt new file mode 100644 index 0000000000..3ac4984f10 --- /dev/null +++ b/Documentation/RelNotes/1.8.5.2.txt @@ -0,0 +1,20 @@ +Git v1.8.5.2 Release Notes +========================== + +Fixes since v1.8.5.1 +-------------------- + + * "git diff -- ':(icase)makefile'" was unnecessarily rejected at the + command line parser. + + * "git cat-file --batch-check=ok" did not check the existence of + the named object. + + * "git am --abort" sometimes complained about not being able to write + a tree with an 0{40} object in it. + + * Two processes creating loose objects at the same time could have + failed unnecessarily when the name of their new objects started + with the same byte value, due to a race condition. + +Also contains typofixes, documentation updates and trivial code clean-ups. diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 705557689d..e6d46edbe7 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -139,8 +139,15 @@ People on the Git mailing list need to be able to read and comment on the changes you are submitting. It is important for a developer to be able to "quote" your changes, using standard e-mail tools, so that they may comment on specific portions of -your code. For this reason, all patches should be submitted -"inline". If your log message (including your name on the +your code. For this reason, each patch should be submitted +"inline" in a separate message. + +Multiple related patches should be grouped into their own e-mail +thread to help readers find all parts of the series. To that end, +send them as replies to either an additional "cover letter" message +(see below), the first patch, or the respective preceding patch. + +If your log message (including your name on the Signed-off-by line) is not writable in ASCII, make sure that you send off a message in the correct encoding. diff --git a/Documentation/git-cherry.txt b/Documentation/git-cherry.txt index 2d0daae626..0ea921a593 100644 --- a/Documentation/git-cherry.txt +++ b/Documentation/git-cherry.txt @@ -3,7 +3,7 @@ git-cherry(1) NAME ---- -git-cherry - Find commits not merged upstream +git-cherry - Find commits yet to be applied to upstream SYNOPSIS -------- @@ -12,46 +12,26 @@ SYNOPSIS DESCRIPTION ----------- -The changeset (or "diff") of each commit between the fork-point and <head> -is compared against each commit between the fork-point and <upstream>. -The diffs are compared after removing any whitespace and line numbers. +Determine whether there are commits in `<head>..<upstream>` that are +equivalent to those in the range `<limit>..<head>`. -Every commit that doesn't exist in the <upstream> branch -has its id (sha1) reported, prefixed by a symbol. The ones that have -equivalent change already -in the <upstream> branch are prefixed with a minus (-) sign, and those -that only exist in the <head> branch are prefixed with a plus (+) symbol: - - __*__*__*__*__> <upstream> - / - fork-point - \__+__+__-__+__+__-__+__> <head> - - -If a <limit> has been given then the commits along the <head> branch up -to and including <limit> are not reported: - - __*__*__*__*__> <upstream> - / - fork-point - \__*__*__<limit>__-__+__> <head> - - -Because 'git cherry' compares the changeset rather than the commit id -(sha1), you can use 'git cherry' to find out if a commit you made locally -has been applied <upstream> under a different commit id. For example, -this will happen if you're feeding patches <upstream> via email rather -than pushing or pulling commits directly. +The equivalence test is based on the diff, after removing whitespace +and line numbers. git-cherry therefore detects when commits have been +"copied" by means of linkgit:git-cherry-pick[1], linkgit:git-am[1] or +linkgit:git-rebase[1]. +Outputs the SHA1 of every commit in `<limit>..<head>`, prefixed with +`-` for commits that have an equivalent in <upstream>, and `+` for +commits that do not. OPTIONS ------- -v:: - Verbose. + Show the commit subjects next to the SHA1s. <upstream>:: - Upstream branch to compare against. - Defaults to the first tracked remote branch, if available. + Upstream branch to search for equivalent commits. + Defaults to the upstream branch of HEAD. <head>:: Working branch; defaults to HEAD. @@ -59,6 +39,103 @@ OPTIONS <limit>:: Do not report commits up to (and including) limit. +EXAMPLES +-------- + +Patch workflows +~~~~~~~~~~~~~~~ + +git-cherry is frequently used in patch-based workflows (see +linkgit:gitworkflows[7]) to determine if a series of patches has been +applied by the upstream maintainer. In such a workflow you might +create and send a topic branch like this: + +------------ +$ git checkout -b topic origin/master +# work and create some commits +$ git format-patch origin/master +$ git send-email ... 00* +------------ + +Later, you can see whether your changes have been applied by saying +(still on `topic`): + +------------ +$ git fetch # update your notion of origin/master +$ git cherry -v +------------ + +Concrete example +~~~~~~~~~~~~~~~~ + +In a situation where topic consisted of three commits, and the +maintainer applied two of them, the situation might look like: + +------------ +$ git log --graph --oneline --decorate --boundary origin/master...topic +* 7654321 (origin/master) upstream tip commit +[... snip some other commits ...] +* cccc111 cherry-pick of C +* aaaa111 cherry-pick of A +[... snip a lot more that has happened ...] +| * cccc000 (topic) commit C +| * bbbb000 commit B +| * aaaa000 commit A +|/ +o 1234567 branch point +------------ + +In such cases, git-cherry shows a concise summary of what has yet to +be applied: + +------------ +$ git cherry origin/master topic +- cccc000... commit C ++ bbbb000... commit B +- aaaa000... commit A +------------ + +Here, we see that the commits A and C (marked with `-`) can be +dropped from your `topic` branch when you rebase it on top of +`origin/master`, while the commit B (marked with `+`) still needs to +be kept so that it will be sent to be applied to `origin/master`. + + +Using a limit +~~~~~~~~~~~~~ + +The optional <limit> is useful in cases where your topic is based on +other work that is not in upstream. Expanding on the previous +example, this might look like: + +------------ +$ git log --graph --oneline --decorate --boundary origin/master...topic +* 7654321 (origin/master) upstream tip commit +[... snip some other commits ...] +* cccc111 cherry-pick of C +* aaaa111 cherry-pick of A +[... snip a lot more that has happened ...] +| * cccc000 (topic) commit C +| * bbbb000 commit B +| * aaaa000 commit A +| * 0000fff (base) unpublished stuff F +[... snip ...] +| * 0000aaa unpublished stuff A +|/ +o 1234567 merge-base between upstream and topic +------------ + +By specifying `base` as the limit, you can avoid listing commits +between `base` and `topic`: + +------------ +$ git cherry origin/master topic base +- cccc000... commit C ++ bbbb000... commit B +- aaaa000... commit A +------------ + + SEE ALSO -------- linkgit:git-patch-id[1] diff --git a/Documentation/git-fetch-pack.txt b/Documentation/git-fetch-pack.txt index 444b805d35..93b5067946 100644 --- a/Documentation/git-fetch-pack.txt +++ b/Documentation/git-fetch-pack.txt @@ -12,7 +12,7 @@ SYNOPSIS 'git fetch-pack' [--all] [--quiet|-q] [--keep|-k] [--thin] [--include-tag] [--upload-pack=<git-upload-pack>] [--depth=<n>] [--no-progress] - [-v] [<host>:]<directory> [<refs>...] + [-v] <repository> [<refs>...] DESCRIPTION ----------- @@ -97,19 +97,18 @@ be in a separate packet, and the list must end with a flush packet. -v:: Run verbosely. -<host>:: - A remote host that houses the repository. When this - part is specified, 'git-upload-pack' is invoked via - ssh. - -<directory>:: - The repository to sync from. +<repository>:: + The URL to the remote repository. <refs>...:: The remote heads to update from. This is relative to $GIT_DIR (e.g. "HEAD", "refs/heads/master"). When unspecified, update from all heads the remote side has. +SEE ALSO +-------- +linkgit:git-fetch[1] + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index 34097efea7..1f7bc67d6c 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -15,9 +15,9 @@ DESCRIPTION ----------- Shows the commit logs. -The command takes options applicable to the 'git rev-list' +The command takes options applicable to the `git rev-list` command to control what is shown and how, and options applicable to -the 'git diff-*' commands to control how the changes +the `git diff-*` commands to control how the changes each commit introduces are shown. @@ -42,29 +42,27 @@ OPTIONS --use-mailmap:: Use mailmap file to map author and committer names and email - to canonical real names and email addresses. See + addresses to canonical real names and email addresses. See linkgit:git-shortlog[1]. --full-diff:: - Without this flag, "git log -p <path>..." shows commits that + Without this flag, `git log -p <path>...` shows commits that touch the specified paths, and diffs about the same specified paths. With this, the full diff is shown for commits that touch the specified paths; this means that "<path>..." limits only commits, and doesn't limit diff for those commits. + Note that this affects all diff-based output types, e.g. those -produced by --stat etc. +produced by `--stat`, etc. --log-size:: - Before the log message print out its size in bytes. Intended - mainly for porcelain tools consumption. If Git is unable to - produce a valid value size is set to zero. - Note that only message is considered, if also a diff is shown - its size is not included. + Include a line ``log size <number>'' in the output for each commit, + where <number> is the length of that commit's message in bytes. + Intended to speed up tools that read log messages from `git log` + output by allowing them to allocate space in advance. -L <start>,<end>:<file>:: -L :<regex>:<file>:: - Trace the evolution of the line range given by "<start>,<end>" (or the funcname regex <regex>) within the <file>. You may not give any pathspec limiters. This is currently limited to @@ -80,16 +78,16 @@ include::line-range-format.txt[] whole history leading to the current commit). `origin..HEAD` specifies all the commits reachable from the current commit (i.e. `HEAD`), but not from `origin`. For a complete list of - ways to spell <revision range>, see the "Specifying Ranges" + ways to spell <revision range>, see the 'Specifying Ranges' section of linkgit:gitrevisions[7]. [\--] <path>...:: Show only commits that are enough to explain how the files - that match the specified paths came to be. See "History - Simplification" below for details and other simplification + that match the specified paths came to be. See 'History + Simplification' below for details and other simplification modes. + -Paths may need to be prefixed with "\-- " to separate them from +Paths may need to be prefixed with ``\-- '' to separate them from options or the revision range, when confusion arises. include::rev-list-options.txt[] @@ -113,12 +111,12 @@ EXAMPLES `git log v2.6.12.. include/scsi drivers/scsi`:: Show all commits since version 'v2.6.12' that changed any file - in the include/scsi or drivers/scsi subdirectories + in the `include/scsi` or `drivers/scsi` subdirectories `git log --since="2 weeks ago" -- gitk`:: Show the changes during the last two weeks to the file 'gitk'. - The "--" is necessary to avoid confusion with the *branch* named + The ``--'' is necessary to avoid confusion with the *branch* named 'gitk' `git log --name-status release..test`:: @@ -129,7 +127,7 @@ EXAMPLES `git log --follow builtin/rev-list.c`:: - Shows the commits that changed builtin/rev-list.c, including + Shows the commits that changed `builtin/rev-list.c`, including those commits that occurred before the file was given its present name. @@ -147,17 +145,18 @@ EXAMPLES `git log -p -m --first-parent`:: Shows the history including change diffs, but only from the - "main branch" perspective, skipping commits that come from merged + ``main branch'' perspective, skipping commits that come from merged branches, and showing full diffs of changes introduced by the merges. This makes sense only when following a strict policy of merging all topic branches when staying on a single integration branch. `git log -L '/int main/',/^}/:main.c`:: - Shows how the function `main()` in the file 'main.c' evolved + Shows how the function `main()` in the file `main.c` evolved over time. `git log -3`:: + Limits the number of commits to show to 3. DISCUSSION @@ -172,12 +171,12 @@ See linkgit:git-config[1] for core variables and linkgit:git-diff[1] for settings related to diff generation. format.pretty:: - Default for the `--format` option. (See "PRETTY FORMATS" above.) - Defaults to "medium". + Default for the `--format` option. (See 'Pretty Formats' above.) + Defaults to `medium`. i18n.logOutputEncoding:: - Encoding to use when displaying logs. (See "Discussion", above.) - Defaults to the value of `i18n.commitEncoding` if set, UTF-8 + Encoding to use when displaying logs. (See 'Discussion' above.) + Defaults to the value of `i18n.commitEncoding` if set, and UTF-8 otherwise. log.date:: @@ -186,7 +185,7 @@ log.date:: dates like `Sat May 8 19:35:34 2010 -0500`. log.showroot:: - If `false`, 'git log' and related commands will not treat the + If `false`, `git log` and related commands will not treat the initial commit as a big creation event. Any root commits in `git log -p` output would be shown without a diff attached. The default is `true`. @@ -197,7 +196,7 @@ mailmap.*:: notes.displayRef:: Which refs, in addition to the default set by `core.notesRef` or 'GIT_NOTES_REF', to read notes from when showing commit - messages with the 'log' family of commands. See + messages with the `log` family of commands. See linkgit:git-notes[1]. + May be an unabbreviated ref name or a glob and may be specified diff --git a/Documentation/git.txt b/Documentation/git.txt index b73a24a3c7..cc0e5e2bfe 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -43,14 +43,17 @@ unreleased) version of Git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.8.5/git.html[documentation for release 1.8.5] +* link:v1.8.5.2/git.html[documentation for release 1.8.5.2] * release notes for + link:RelNotes/1.8.5.2.txt[1.8.5.2], + link:RelNotes/1.8.5.1.txt[1.8.5.1], link:RelNotes/1.8.5.txt[1.8.5]. -* link:v1.8.4.4/git.html[documentation for release 1.8.4.4] +* link:v1.8.4.5/git.html[documentation for release 1.8.4.5] * release notes for + link:RelNotes/1.8.4.5.txt[1.8.4.5], link:RelNotes/1.8.4.4.txt[1.8.4.4], link:RelNotes/1.8.4.3.txt[1.8.4.3], link:RelNotes/1.8.4.2.txt[1.8.4.2], diff --git a/Documentation/gitcli.txt b/Documentation/gitcli.txt index 3146413cce..41bed2983f 100644 --- a/Documentation/gitcli.txt +++ b/Documentation/gitcli.txt @@ -83,12 +83,12 @@ scripting Git: `git log -1 HEAD` but write `git log -1 HEAD --`; the former will not work if you happen to have a file called `HEAD` in the work tree. - * many commands allow a long option "--option" to be abbreviated + * many commands allow a long option `--option` to be abbreviated only to their unique prefix (e.g. if there is no other option - whose name begins with "opt", you may be able to spell "--opt" to - invoke the "--option" flag), but you should fully spell them out + whose name begins with `opt`, you may be able to spell `--opt` to + invoke the `--option` flag), but you should fully spell them out when writing your scripts; later versions of Git may introduce a - new option whose name shares the same prefix, e.g. "--optimize", + new option whose name shares the same prefix, e.g. `--optimize`, to make a short prefix that used to be unique no longer unique. @@ -149,7 +149,7 @@ prefix of a long option as if it is fully spelled out, but use this with a caution. For example, `git commit --amen` behaves as if you typed `git commit --amend`, but that is true only until a later version of Git introduces another option that shares the same prefix, -e.g `git commit --amenity" option. +e.g. `git commit --amenity` option. Separating argument from the option diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index f7be93f631..347a9f76ee 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -35,6 +35,8 @@ submodule.<name>.url:: linkgit:git-clone[1] or (if it begins with ./ or ../) a location relative to the superproject's origin repository. +In addition, there are a number of optional keys: + submodule.<name>.update:: Defines what to do when the submodule is updated by the superproject. If 'checkout' (the default), the new commit specified in the diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index e4706615be..aa1c8880dd 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -362,12 +362,12 @@ full pathname may have special meaning: - A leading "`**`" followed by a slash means match in all directories. For example, "`**/foo`" matches file or directory - "`foo`" anywhere, the same as pattern "`foo`". "**/foo/bar" + "`foo`" anywhere, the same as pattern "`foo`". "`**/foo/bar`" matches file or directory "`bar`" anywhere that is directly under directory "`foo`". - - A trailing "/**" matches everything inside. For example, - "abc/**" matches all files inside directory "abc", relative + - A trailing "`/**`" matches everything inside. For example, + "`abc/**`" matches all files inside directory "abc", relative to the location of the `.gitignore` file, with infinite depth. - A slash followed by two consecutive asterisks then a slash diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index ec86d09199..2991d70a4a 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -18,33 +18,27 @@ ordering and formatting options, such as `--reverse`. -<number>:: -n <number>:: --max-count=<number>:: - Limit the number of commits to output. --skip=<number>:: - Skip 'number' commits before starting to show the commit output. --since=<date>:: --after=<date>:: - Show commits more recent than a specific date. --until=<date>:: --before=<date>:: - Show commits older than a specific date. ifdef::git-rev-list[] --max-age=<timestamp>:: --min-age=<timestamp>:: - Limit the commits output to specified time range. endif::git-rev-list[] --author=<pattern>:: --committer=<pattern>:: - Limit the commits output to ones with author/committer header lines that match the specified pattern (regular expression). With more than one `--author=<pattern>`, @@ -52,7 +46,6 @@ endif::git-rev-list[] chosen (similarly for multiple `--committer=<pattern>`). --grep-reflog=<pattern>:: - Limit the commits output to ones with reflog entries that match the specified pattern (regular expression). With more than one `--grep-reflog`, commits whose reflog message @@ -60,7 +53,6 @@ endif::git-rev-list[] error to use this option unless `--walk-reflogs` is in use. --grep=<pattern>:: - Limit the commits output to ones with log message that matches the specified pattern (regular expression). With more than one `--grep=<pattern>`, commits whose message @@ -71,46 +63,39 @@ When `--show-notes` is in effect, the message from the notes as if it is part of the log message. --all-match:: - Limit the commits output to ones that match all given --grep, + Limit the commits output to ones that match all given `--grep`, instead of ones that match at least one. -i:: --regexp-ignore-case:: - - Match the regexp limiting patterns without regard to letters case. + Match the regular expression limiting patterns without regard to letter + case. --basic-regexp:: - Consider the limiting patterns to be basic regular expressions; this is the default. -E:: --extended-regexp:: - Consider the limiting patterns to be extended regular expressions instead of the default basic regular expressions. -F:: --fixed-strings:: - Consider the limiting patterns to be fixed strings (don't interpret pattern as a regular expression). --perl-regexp:: - - Consider the limiting patterns to be Perl-compatible regexp. + Consider the limiting patterns to be Perl-compatible regular expressions. Requires libpcre to be compiled in. --remove-empty:: - Stop when a given path disappears from the tree. --merges:: - Print only merge commits. This is exactly the same as `--min-parents=2`. --no-merges:: - Do not print commits with more than one parent. This is exactly the same as `--max-parents=1`. @@ -118,7 +103,6 @@ if it is part of the log message. --max-parents=<number>:: --no-min-parents:: --no-max-parents:: - Show only commits which have at least (or at most) that many parent commits. In particular, `--max-parents=1` is the same as `--no-merges`, `--min-parents=2` is the same as `--merges`. `--max-parents=0` @@ -138,31 +122,26 @@ parents) and `--max-parents=-1` (negative numbers denote no upper limit). brought in to your history by such a merge. --not:: - Reverses the meaning of the '{caret}' prefix (or lack thereof) - for all following revision specifiers, up to the next '--not'. + for all following revision specifiers, up to the next `--not`. --all:: - Pretend as if all the refs in `refs/` are listed on the command line as '<commit>'. --branches[=<pattern>]:: - Pretend as if all the refs in `refs/heads` are listed on the command line as '<commit>'. If '<pattern>' is given, limit branches to ones matching given shell glob. If pattern lacks '?', '{asterisk}', or '[', '/{asterisk}' at the end is implied. --tags[=<pattern>]:: - Pretend as if all the refs in `refs/tags` are listed on the command line as '<commit>'. If '<pattern>' is given, limit tags to ones matching given shell glob. If pattern lacks '?', '{asterisk}', or '[', '/{asterisk}' at the end is implied. --remotes[=<pattern>]:: - Pretend as if all the refs in `refs/remotes` are listed on the command line as '<commit>'. If '<pattern>' is given, limit remote-tracking branches to ones matching given shell glob. @@ -175,13 +154,11 @@ parents) and `--max-parents=-1` (negative numbers denote no upper limit). or '[', '/{asterisk}' at the end is implied. --ignore-missing:: - Upon seeing an invalid object name in the input, pretend as if the bad input was not given. ifndef::git-rev-list[] --bisect:: - Pretend as if the bad bisection ref `refs/bisect/bad` was listed and as if it was followed by `--not` and the good bisection refs `refs/bisect/good-*` on the command @@ -189,7 +166,6 @@ ifndef::git-rev-list[] endif::git-rev-list[] --stdin:: - In addition to the '<commit>' listed on the command line, read them from the standard input. If a '--' separator is seen, stop reading commits and start reading paths to limit the @@ -197,36 +173,32 @@ endif::git-rev-list[] ifdef::git-rev-list[] --quiet:: - Don't print anything to standard output. This form is primarily meant to allow the caller to test the exit status to see if a range of objects is fully connected (or not). It is faster than redirecting stdout - to /dev/null as the output does not have to be formatted. + to `/dev/null` as the output does not have to be formatted. endif::git-rev-list[] --cherry-mark:: - Like `--cherry-pick` (see below) but mark equivalent commits with `=` rather than omitting them, and inequivalent ones with `+`. --cherry-pick:: - Omit any commit that introduces the same change as - another commit on the "other side" when the set of + another commit on the ``other side'' when the set of commits are limited with symmetric difference. + For example, if you have two branches, `A` and `B`, a usual way to list all commits on only one side of them is with `--left-right` (see the example below in the description of -the `--left-right` option). It however shows the commits that were cherry-picked -from the other branch (for example, "3rd on b" may be cherry-picked -from branch A). With this option, such pairs of commits are +the `--left-right` option). However, it shows the commits that were +cherry-picked from the other branch (for example, ``3rd on b'' may be +cherry-picked from branch A). With this option, such pairs of commits are excluded from the output. --left-only:: --right-only:: - List only commits on the respective side of a symmetric range, i.e. only those which would be marked `<` resp. `>` by `--left-right`. @@ -238,7 +210,6 @@ More precisely, `--cherry-pick --right-only --no-merges` gives the exact list. --cherry:: - A synonym for `--right-only --cherry-mark --no-merges`; useful to limit the output to the commits on our side and mark those that have been applied to the other side of a forked history with @@ -247,30 +218,27 @@ list. -g:: --walk-reflogs:: - Instead of walking the commit ancestry chain, walk reflog entries from the most recent one to older ones. When this option is used you cannot specify commits to exclude (that is, '{caret}commit', 'commit1..commit2', nor 'commit1\...commit2' notations cannot be used). + -With '\--pretty' format other than oneline (for obvious reasons), +With `--pretty` format other than `oneline` (for obvious reasons), this causes the output to have two extra lines of information taken from the reflog. By default, 'commit@\{Nth}' notation is used in the output. When the starting commit is specified as 'commit@\{now}', output also uses 'commit@\{timestamp}' notation -instead. Under '\--pretty=oneline', the commit message is +instead. Under `--pretty=oneline`, the commit message is prefixed with this information on the same line. -This option cannot be combined with '\--reverse'. +This option cannot be combined with `--reverse`. See also linkgit:git-reflog[1]. --merge:: - After a failed merge, show refs that touch files having a conflict and don't exist on all heads to merge. --boundary:: - Output excluded boundary commits. Boundary commits are prefixed with `-`. @@ -287,11 +255,9 @@ is how to do it, as there are various strategies to simplify the history. The following options select the commits to be shown: <paths>:: - Commits modifying the given <paths> are selected. --simplify-by-decoration:: - Commits that are referred by some branch or tag are selected. Note that extra commits can be shown to give a meaningful history. @@ -299,33 +265,27 @@ Note that extra commits can be shown to give a meaningful history. The following options affect the way the simplification is performed: Default mode:: - Simplifies the history to the simplest history explaining the final state of the tree. Simplest because it prunes some side branches if the end result is the same (i.e. merging branches with the same content) --full-history:: - Same as the default mode, but does not prune some history. --dense:: - Only the selected commits are shown, plus some to have a meaningful history. --sparse:: - All commits in the simplified history are shown. --simplify-merges:: - - Additional option to '--full-history' to remove some needless + Additional option to `--full-history` to remove some needless merges from the resulting history, as there are no selected commits contributing to this merge. --ancestry-path:: - When given a range of commits to display (e.g. 'commit1..commit2' or 'commit2 {caret}commit1'), only display commits that exist directly on the ancestry chain between the 'commit1' and @@ -352,36 +312,35 @@ The horizontal line of history A---Q is taken to be the first parent of each merge. The commits are: * `I` is the initial commit, in which `foo` exists with contents - "asdf", and a file `quux` exists with contents "quux". Initial + ``asdf'', and a file `quux` exists with contents ``quux''. Initial commits are compared to an empty tree, so `I` is !TREESAME. -* In `A`, `foo` contains just "foo". +* In `A`, `foo` contains just ``foo''. * `B` contains the same change as `A`. Its merge `M` is trivial and hence TREESAME to all parents. -* `C` does not change `foo`, but its merge `N` changes it to "foobar", +* `C` does not change `foo`, but its merge `N` changes it to ``foobar'', so it is not TREESAME to any parent. -* `D` sets `foo` to "baz". Its merge `O` combines the strings from - `N` and `D` to "foobarbaz"; i.e., it is not TREESAME to any parent. +* `D` sets `foo` to ``baz''. Its merge `O` combines the strings from + `N` and `D` to ``foobarbaz''; i.e., it is not TREESAME to any parent. -* `E` changes `quux` to "xyzzy", and its merge `P` combines the - strings to "quux xyzzy". `P` is TREESAME to `O`, but not to `E`. +* `E` changes `quux` to ``xyzzy'', and its merge `P` combines the + strings to ``quux xyzzy''. `P` is TREESAME to `O`, but not to `E`. * `X` is an independent root commit that added a new file `side`, and `Y` modified it. `Y` is TREESAME to `X`. Its merge `Q` added `side` to `P`, and `Q` is TREESAME to `P`, but not to `Y`. -'rev-list' walks backwards through history, including or excluding -commits based on whether '\--full-history' and/or parent rewriting -(via '\--parents' or '\--children') are used. The following settings +`rev-list` walks backwards through history, including or excluding +commits based on whether `--full-history` and/or parent rewriting +(via `--parents` or `--children`) are used. The following settings are available. Default mode:: - Commits are included if they are not TREESAME to any parent - (though this can be changed, see '\--sparse' below). If the + (though this can be changed, see `--sparse` below). If the commit was a merge, and it was TREESAME to one parent, follow only that parent. (Even if there are several TREESAME parents, follow only one of them.) Otherwise, follow all @@ -400,12 +359,11 @@ available, removed `B` from consideration entirely. `C` was considered via `N`, but is TREESAME. Root commits are compared to an empty tree, so `I` is !TREESAME. + -Parent/child relations are only visible with --parents, but that does +Parent/child relations are only visible with `--parents`, but that does not affect the commits selected in default mode, so we have shown the parent lines. --full-history without parent rewriting:: - This mode differs from the default in one point: always follow all parents of a merge, even if it is TREESAME to one of them. Even if more than one side of the merge has commits that are @@ -425,9 +383,8 @@ about the parent/child relationships between the commits, so we show them disconnected. --full-history with parent rewriting:: - Ordinary commits are only included if they are !TREESAME - (though this can be changed, see '\--sparse' below). + (though this can be changed, see `--sparse` below). + Merges are always included. However, their parent list is rewritten: Along each parent, prune away commits that are not included @@ -441,7 +398,7 @@ themselves. This results in `-------------' ----------------------------------------------------------------------- + -Compare to '\--full-history' without rewriting above. Note that `E` +Compare to `--full-history` without rewriting above. Note that `E` was pruned away because it is TREESAME, but the parent list of P was rewritten to contain `E`'s parent `I`. The same happened for `C` and `N`, and `X`, `Y` and `Q`. @@ -450,22 +407,19 @@ In addition to the above settings, you can change whether TREESAME affects inclusion: --dense:: - Commits that are walked are included if they are not TREESAME to any parent. --sparse:: - All commits that are walked are included. + -Note that without '\--full-history', this still simplifies merges: if +Note that without `--full-history`, this still simplifies merges: if one of the parents is TREESAME, we follow only that one, so the other sides of the merge are never walked. --simplify-merges:: - First, build a history graph in the same way that - '\--full-history' with parent rewriting does (see above). + `--full-history` with parent rewriting does (see above). + Then simplify each commit `C` to its replacement `C'` in the final history according to the following rules: @@ -484,7 +438,7 @@ history according to the following rules: -- + The effect of this is best shown by way of comparing to -'\--full-history' with parent rewriting. The example turns into: +`--full-history` with parent rewriting. The example turns into: + ----------------------------------------------------------------------- .-A---M---N---O @@ -494,7 +448,7 @@ The effect of this is best shown by way of comparing to `---------' ----------------------------------------------------------------------- + -Note the major differences in `N`, `P` and `Q` over '--full-history': +Note the major differences in `N`, `P`, and `Q` over `--full-history`: + -- * `N`'s parent list had `I` removed, because it is an ancestor of the @@ -511,11 +465,10 @@ Note the major differences in `N`, `P` and `Q` over '--full-history': Finally, there is a fifth simplification mode available: --ancestry-path:: - Limit the displayed commits to those directly on the ancestry - chain between the "from" and "to" commits in the given commit - range. I.e. only display commits that are ancestor of the "to" - commit, and descendants of the "from" commit. + chain between the ``from'' and ``to'' commits in the given commit + range. I.e. only display commits that are ancestor of the ``to'' + commit and descendants of the ``from'' commit. + As an example use case, consider the following commit history: + @@ -530,14 +483,14 @@ As an example use case, consider the following commit history: A regular 'D..M' computes the set of commits that are ancestors of `M`, but excludes the ones that are ancestors of `D`. This is useful to see what happened to the history leading to `M` since `D`, in the sense -that "what does `M` have that did not exist in `D`". The result in this +that ``what does `M` have that did not exist in `D`''. The result in this example would be all the commits, except `A` and `B` (and `D` itself, of course). + When we want to find out what commits in `M` are contaminated with the bug introduced by `D` and need fixing, however, we might want to view only the subset of 'D..M' that are actually descendants of `D`, i.e. -excluding `C` and `K`. This is exactly what the '--ancestry-path' +excluding `C` and `K`. This is exactly what the `--ancestry-path` option does. Applied to the 'D..M' range, it results in: + ----------------------------------------------------------------------- @@ -548,7 +501,7 @@ option does. Applied to the 'D..M' range, it results in: L--M ----------------------------------------------------------------------- -The '\--simplify-by-decoration' option allows you to view only the +The `--simplify-by-decoration` option allows you to view only the big picture of the topology of the history, by omitting commits that are not referenced by tags. Commits are marked as !TREESAME (in other words, kept after history simplification rules described @@ -561,50 +514,47 @@ Bisection Helpers ~~~~~~~~~~~~~~~~~ --bisect:: - -Limit output to the one commit object which is roughly halfway between -included and excluded commits. Note that the bad bisection ref -`refs/bisect/bad` is added to the included commits (if it -exists) and the good bisection refs `refs/bisect/good-*` are -added to the excluded commits (if they exist). Thus, supposing there -are no refs in `refs/bisect/`, if - + Limit output to the one commit object which is roughly halfway between + included and excluded commits. Note that the bad bisection ref + `refs/bisect/bad` is added to the included commits (if it + exists) and the good bisection refs `refs/bisect/good-*` are + added to the excluded commits (if they exist). Thus, supposing there + are no refs in `refs/bisect/`, if ++ ----------------------------------------------------------------------- $ git rev-list --bisect foo ^bar ^baz ----------------------------------------------------------------------- - ++ outputs 'midpoint', the output of the two commands - ++ ----------------------------------------------------------------------- $ git rev-list foo ^midpoint $ git rev-list midpoint ^bar ^baz ----------------------------------------------------------------------- - ++ would be of roughly the same length. Finding the change which introduces a regression is thus reduced to a binary search: repeatedly generate and test new 'midpoint's until the commit chain is of length one. --bisect-vars:: - -This calculates the same as `--bisect`, except that refs in -`refs/bisect/` are not used, and except that this outputs -text ready to be eval'ed by the shell. These lines will assign the -name of the midpoint revision to the variable `bisect_rev`, and the -expected number of commits to be tested after `bisect_rev` is tested -to `bisect_nr`, the expected number of commits to be tested if -`bisect_rev` turns out to be good to `bisect_good`, the expected -number of commits to be tested if `bisect_rev` turns out to be bad to -`bisect_bad`, and the number of commits we are bisecting right now to -`bisect_all`. + This calculates the same as `--bisect`, except that refs in + `refs/bisect/` are not used, and except that this outputs + text ready to be eval'ed by the shell. These lines will assign the + name of the midpoint revision to the variable `bisect_rev`, and the + expected number of commits to be tested after `bisect_rev` is tested + to `bisect_nr`, the expected number of commits to be tested if + `bisect_rev` turns out to be good to `bisect_good`, the expected + number of commits to be tested if `bisect_rev` turns out to be bad to + `bisect_bad`, and the number of commits we are bisecting right now to + `bisect_all`. --bisect-all:: - -This outputs all the commit objects between the included and excluded -commits, ordered by their distance to the included and excluded -commits. Refs in `refs/bisect/` are not used. The farthest -from them is displayed first. (This is the only one displayed by -`--bisect`.) + This outputs all the commit objects between the included and excluded + commits, ordered by their distance to the included and excluded + commits. Refs in `refs/bisect/` are not used. The farthest + from them is displayed first. (This is the only one displayed by + `--bisect`.) + This is useful because it makes it easy to choose a good commit to test when you want to avoid to test some of them for some reason (they @@ -654,9 +604,8 @@ avoid showing the commits from two parallel development track mixed together. --reverse:: - Output the commits in reverse order. - Cannot be combined with '\--walk-reflogs'. + Cannot be combined with `--walk-reflogs`. Object Traversal ~~~~~~~~~~~~~~~~ @@ -664,37 +613,32 @@ Object Traversal These options are mostly targeted for packing of Git repositories. --objects:: - Print the object IDs of any object referenced by the listed - commits. '--objects foo ^bar' thus means "send me + commits. `--objects foo ^bar` thus means ``send me all object IDs which I need to download if I have the commit - object 'bar', but not 'foo'". + object _bar_ but not _foo_''. --objects-edge:: - - Similar to '--objects', but also print the IDs of excluded - commits prefixed with a "-" character. This is used by - linkgit:git-pack-objects[1] to build "thin" pack, which records + Similar to `--objects`, but also print the IDs of excluded + commits prefixed with a ``-'' character. This is used by + linkgit:git-pack-objects[1] to build ``thin'' pack, which records objects in deltified form based on objects contained in these excluded commits to reduce network traffic. --unpacked:: - - Only useful with '--objects'; print the object IDs that are not + Only useful with `--objects`; print the object IDs that are not in packs. --no-walk[=(sorted|unsorted)]:: - Only show the given commits, but do not traverse their ancestors. This has no effect if a range is specified. If the argument - "unsorted" is given, the commits are show in the order they were - given on the command line. Otherwise (if "sorted" or no argument - was given), the commits are show in reverse chronological order + `unsorted` is given, the commits are shown in the order they were + given on the command line. Otherwise (if `sorted` or no argument + was given), the commits are shown in reverse chronological order by commit time. --do-walk:: - - Overrides a previous --no-walk. + Overrides a previous `--no-walk`. Commit Formatting ~~~~~~~~~~~~~~~~~ @@ -708,26 +652,24 @@ endif::git-rev-list[] include::pretty-options.txt[] --relative-date:: - Synonym for `--date=relative`. --date=(relative|local|default|iso|rfc|short|raw):: - Only takes effect for dates shown in human-readable format, such - as when using "--pretty". `log.date` config variable sets a default - value for log command's --date option. + as when using `--pretty`. `log.date` config variable sets a default + value for the log command's `--date` option. + `--date=relative` shows dates relative to the current time, -e.g. "2 hours ago". +e.g. ``2 hours ago''. + `--date=local` shows timestamps in user's local time zone. + `--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format. + `--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 -format, often found in E-mail messages. +format, often found in email messages. + -`--date=short` shows only date but not time, in `YYYY-MM-DD` format. +`--date=short` shows only the date, but not the time, in `YYYY-MM-DD` format. + `--date=raw` shows the date in the internal raw Git format `%s %z` format. + @@ -736,18 +678,15 @@ format, often found in E-mail messages. ifdef::git-rev-list[] --header:: - Print the contents of the commit in raw-format; each record is separated with a NUL character. endif::git-rev-list[] --parents:: - Print also the parents of the commit (in the form "commit parent..."). Also enables parent rewriting, see 'History Simplification' below. --children:: - Print also the children of the commit (in the form "commit child..."). Also enables parent rewriting, see 'History Simplification' below. @@ -757,7 +696,6 @@ ifdef::git-rev-list[] endif::git-rev-list[] --left-right:: - Mark which side of a symmetric diff a commit is reachable from. Commits from the left side are prefixed with `<` and those from the right with `>`. If combined with `--boundary`, those @@ -787,7 +725,6 @@ you would get an output like this: ----------------------------------------------------------------------- --graph:: - Draw a text-based graphical representation of the commit history on the left hand side of the output. This may cause extra lines to be printed in between commits, in order for the graph history @@ -795,31 +732,29 @@ you would get an output like this: + This enables parent rewriting, see 'History Simplification' below. + -This implies the '--topo-order' option by default, but the -'--date-order' option may also be specified. +This implies the `--topo-order` option by default, but the +`--date-order` option may also be specified. ifdef::git-rev-list[] --count:: Print a number stating how many commits would have been listed, and suppress all other output. When used together - with '--left-right', instead print the counts for left and + with `--left-right`, instead print the counts for left and right commits, separated by a tab. When used together with - '--cherry-mark', omit patch equivalent commits from these + `--cherry-mark`, omit patch equivalent commits from these counts and print the count for equivalent commits separated by a tab. endif::git-rev-list[] - ifndef::git-rev-list[] Diff Formatting ~~~~~~~~~~~~~~~ -Below are listed options that control the formatting of diff output. +Listed below are options that control the formatting of diff output. Some of them are specific to linkgit:git-rev-list[1], however other diff options may be given. See linkgit:git-diff-files[1] for more options. -c:: - With this option, diff output for a merge commit shows the differences from each of the parents to the merge result simultaneously instead of showing pairwise diff between a parent @@ -827,26 +762,22 @@ options may be given. See linkgit:git-diff-files[1] for more options. which were modified from all parents. --cc:: - - This flag implies the '-c' option and further compresses the + This flag implies the `-c` option and further compresses the patch output by omitting uninteresting hunks whose contents in the parents have only two variants and the merge result picks one of them without modification. -m:: - This flag makes the merge commits show the full diff like regular commits; for each merge parent, a separate log entry and diff is generated. An exception is that only diff against - the first parent is shown when '--first-parent' option is given; + the first parent is shown when `--first-parent` option is given; in that case, the output represents the changes the merge brought _into_ the then-current branch. -r:: - Show recursive diffs. -t:: - - Show the tree objects in the diff output. This implies '-r'. + Show the tree objects in the diff output. This implies `-r`. endif::git-rev-list[] diff --git a/Documentation/technical/api-ref-iteration.txt b/Documentation/technical/api-ref-iteration.txt index aa1c50f181..02adfd45d3 100644 --- a/Documentation/technical/api-ref-iteration.txt +++ b/Documentation/technical/api-ref-iteration.txt @@ -50,10 +50,10 @@ submodules object database. You can do this by a code-snippet like this: const char *path = "path/to/submodule" - if (!add_submodule_odb(path)) + if (add_submodule_odb(path)) die("Error submodule '%s' not populated.", path); -`add_submodule_odb()` will return an non-zero value on success. If you +`add_submodule_odb()` will return zero on success. If you do not do this you will get an error for each ref that it does not point to a valid object. diff --git a/Documentation/technical/http-protocol.txt b/Documentation/technical/http-protocol.txt index caf941a1c5..d21d77d1de 100644 --- a/Documentation/technical/http-protocol.txt +++ b/Documentation/technical/http-protocol.txt @@ -307,7 +307,7 @@ Clients MUST first perform ref discovery with S: ....ACK %s, continue S: ....NAK -Clients MUST NOT reuse or revalidate a cached reponse. +Clients MUST NOT reuse or revalidate a cached response. Servers MUST include sufficient Cache-Control headers to prevent caching of the response. @@ -468,7 +468,7 @@ Clients MUST first perform ref discovery with S: S: .... -Clients MUST NOT reuse or revalidate a cached reponse. +Clients MUST NOT reuse or revalidate a cached response. Servers MUST include sufficient Cache-Control headers to prevent caching of the response. diff --git a/Documentation/technical/pack-heuristics.txt b/Documentation/technical/pack-heuristics.txt index b7bd95152e..95a07db6e8 100644 --- a/Documentation/technical/pack-heuristics.txt +++ b/Documentation/technical/pack-heuristics.txt @@ -1,5 +1,5 @@ - Concerning Git's Packing Heuristics - =================================== +Concerning Git's Packing Heuristics +=================================== Oh, here's a really stupid question: diff --git a/GIT-VERSION-GEN b/GIT-VERSION-GEN index 99a62f3baf..0ec4d003fa 100755 --- a/GIT-VERSION-GEN +++ b/GIT-VERSION-GEN @@ -1,7 +1,7 @@ #!/bin/sh GVF=GIT-VERSION-FILE -DEF_VER=v1.8.5 +DEF_VER=v1.8.5.2 LF=' ' @@ -1 +1 @@ -Documentation/RelNotes/1.8.5.txt
\ No newline at end of file +Documentation/RelNotes/1.8.5.2.txt
\ No newline at end of file diff --git a/builtin/cat-file.c b/builtin/cat-file.c index b2ca775a80..f8288c830c 100644 --- a/builtin/cat-file.c +++ b/builtin/cat-file.c @@ -193,25 +193,28 @@ static size_t expand_format(struct strbuf *sb, const char *start, void *data) return end - start + 1; } -static void print_object_or_die(int fd, const unsigned char *sha1, - enum object_type type, unsigned long size) +static void print_object_or_die(int fd, struct expand_data *data) { - if (type == OBJ_BLOB) { + const unsigned char *sha1 = data->sha1; + + assert(data->info.typep); + + if (data->type == OBJ_BLOB) { if (stream_blob_to_fd(fd, sha1, NULL, 0) < 0) die("unable to stream %s to stdout", sha1_to_hex(sha1)); } else { - enum object_type rtype; - unsigned long rsize; + enum object_type type; + unsigned long size; void *contents; - contents = read_sha1_file(sha1, &rtype, &rsize); + contents = read_sha1_file(sha1, &type, &size); if (!contents) die("object %s disappeared", sha1_to_hex(sha1)); - if (rtype != type) + if (type != data->type) die("object %s changed type!?", sha1_to_hex(sha1)); - if (rsize != size) - die("object %s change size!?", sha1_to_hex(sha1)); + if (data->info.sizep && size != data->size) + die("object %s changed size!?", sha1_to_hex(sha1)); write_or_die(fd, contents, size); free(contents); @@ -250,7 +253,7 @@ static int batch_one_object(const char *obj_name, struct batch_options *opt, strbuf_release(&buf); if (opt->print_contents) { - print_object_or_die(1, data->sha1, data->type, data->size); + print_object_or_die(1, data); write_or_die(1, "\n", 1); } return 0; @@ -275,6 +278,13 @@ static int batch_objects(struct batch_options *opt) data.mark_query = 0; /* + * If we are printing out the object, then always fill in the type, + * since we will want to decide whether or not to stream. + */ + if (opt->print_contents) + data.info.typep = &data.type; + + /* * We are going to call get_sha1 on a potentially very large number of * objects. In most large cases, these will be actual object sha1s. The * cost to double-check that each one is not also a ref (just so we can diff --git a/builtin/diff.c b/builtin/diff.c index adb93a9efa..fe0cc7f1b5 100644 --- a/builtin/diff.c +++ b/builtin/diff.c @@ -64,15 +64,18 @@ static void stuff_change(struct diff_options *opt, static int builtin_diff_b_f(struct rev_info *revs, int argc, const char **argv, - struct blobinfo *blob, - const char *path) + struct blobinfo *blob) { /* Blob vs file in the working tree*/ struct stat st; + const char *path; if (argc > 1) usage(builtin_diff_usage); + GUARD_PATHSPEC(&revs->prune_data, PATHSPEC_FROMTOP | PATHSPEC_LITERAL); + path = revs->prune_data.items[0].match; + if (lstat(path, &st)) die_errno(_("failed to stat '%s'"), path); if (!(S_ISREG(st.st_mode) || S_ISLNK(st.st_mode))) @@ -255,7 +258,6 @@ int cmd_diff(int argc, const char **argv, const char *prefix) struct rev_info rev; struct object_array ent = OBJECT_ARRAY_INIT; int blobs = 0, paths = 0; - const char *path = NULL; struct blobinfo blob[2]; int nongit; int result = 0; @@ -366,13 +368,8 @@ int cmd_diff(int argc, const char **argv, const char *prefix) die(_("unhandled object '%s' given."), name); } } - if (rev.prune_data.nr) { - /* builtin_diff_b_f() */ - GUARD_PATHSPEC(&rev.prune_data, PATHSPEC_FROMTOP | PATHSPEC_LITERAL); - if (!path) - path = rev.prune_data.items[0].match; + if (rev.prune_data.nr) paths += rev.prune_data.nr; - } /* * Now, do the arguments look reasonable? @@ -385,7 +382,7 @@ int cmd_diff(int argc, const char **argv, const char *prefix) case 1: if (paths != 1) usage(builtin_diff_usage); - result = builtin_diff_b_f(&rev, argc, argv, blob, path); + result = builtin_diff_b_f(&rev, argc, argv, blob); break; case 2: if (paths) diff --git a/builtin/for-each-ref.c b/builtin/for-each-ref.c index d096051b15..7557aa239e 100644 --- a/builtin/for-each-ref.c +++ b/builtin/for-each-ref.c @@ -89,7 +89,7 @@ static struct { */ static const char **used_atom; static cmp_type *used_atom_type; -static int used_atom_cnt, sort_atom_limit, need_tagged, need_symref; +static int used_atom_cnt, need_tagged, need_symref; /* * Used to parse format string and sort specifiers @@ -1037,7 +1037,6 @@ int cmd_for_each_ref(int argc, const char **argv, const char *prefix) if (!sort) sort = default_sort(); - sort_atom_limit = used_atom_cnt; /* for warn_ambiguous_refs */ git_config(git_default_config, NULL); diff --git a/builtin/mv.c b/builtin/mv.c index 2e0e61b651..21c46d1636 100644 --- a/builtin/mv.c +++ b/builtin/mv.c @@ -16,9 +16,12 @@ static const char * const builtin_mv_usage[] = { NULL }; +#define DUP_BASENAME 1 +#define KEEP_TRAILING_SLASH 2 + static const char **internal_copy_pathspec(const char *prefix, const char **pathspec, - int count, int base_name) + int count, unsigned flags) { int i; const char **result = xmalloc((count + 1) * sizeof(const char *)); @@ -27,11 +30,12 @@ static const char **internal_copy_pathspec(const char *prefix, for (i = 0; i < count; i++) { int length = strlen(result[i]); int to_copy = length; - while (to_copy > 0 && is_dir_sep(result[i][to_copy - 1])) + while (!(flags & KEEP_TRAILING_SLASH) && + to_copy > 0 && is_dir_sep(result[i][to_copy - 1])) to_copy--; - if (to_copy != length || base_name) { + if (to_copy != length || flags & DUP_BASENAME) { char *it = xmemdupz(result[i], to_copy); - if (base_name) { + if (flags & DUP_BASENAME) { result[i] = xstrdup(basename(it)); free(it); } else @@ -87,16 +91,21 @@ int cmd_mv(int argc, const char **argv, const char *prefix) source = internal_copy_pathspec(prefix, argv, argc, 0); modes = xcalloc(argc, sizeof(enum update_mode)); - dest_path = internal_copy_pathspec(prefix, argv + argc, 1, 0); + /* + * Keep trailing slash, needed to let + * "git mv file no-such-dir/" error out. + */ + dest_path = internal_copy_pathspec(prefix, argv + argc, 1, + KEEP_TRAILING_SLASH); submodule_gitfile = xcalloc(argc, sizeof(char *)); if (dest_path[0][0] == '\0') /* special case: "." was normalized to "" */ - destination = internal_copy_pathspec(dest_path[0], argv, argc, 1); + destination = internal_copy_pathspec(dest_path[0], argv, argc, DUP_BASENAME); else if (!lstat(dest_path[0], &st) && S_ISDIR(st.st_mode)) { dest_path[0] = add_slash(dest_path[0]); - destination = internal_copy_pathspec(dest_path[0], argv, argc, 1); + destination = internal_copy_pathspec(dest_path[0], argv, argc, DUP_BASENAME); } else { if (argc != 1) die("destination '%s' is not a directory", dest_path[0]); @@ -205,6 +214,8 @@ int cmd_mv(int argc, const char **argv, const char *prefix) } } else if (string_list_has_string(&src_for_dst, dst)) bad = _("multiple sources for the same target"); + else if (is_dir_sep(dst[strlen(dst) - 1])) + bad = _("destination directory does not exist"); else string_list_insert(&src_for_dst, dst); diff --git a/builtin/repack.c b/builtin/repack.c index a0ff5c704f..91e2363c71 100644 --- a/builtin/repack.c +++ b/builtin/repack.c @@ -123,7 +123,7 @@ int cmd_repack(int argc, const char **argv, const char *prefix) struct string_list rollback = STRING_LIST_INIT_NODUP; struct string_list existing_packs = STRING_LIST_INIT_DUP; struct strbuf line = STRBUF_INIT; - int nr_packs, ext, ret, failed; + int ext, ret, failed; FILE *out; /* variables to be filled by option parsing */ @@ -233,13 +233,11 @@ int cmd_repack(int argc, const char **argv, const char *prefix) if (ret) return ret; - nr_packs = 0; out = xfdopen(cmd.out, "r"); while (strbuf_getline(&line, out, '\n') != EOF) { if (line.len != 40) die("repack: Expecting 40 character sha1 lines only from pack-objects."); string_list_append(&names, line.buf); - nr_packs++; } fclose(out); ret = finish_command(&cmd); @@ -247,7 +245,7 @@ int cmd_repack(int argc, const char **argv, const char *prefix) return ret; argv_array_clear(&cmd_args); - if (!nr_packs && !quiet) + if (!names.nr && !quiet) printf("Nothing new to pack.\n"); /* diff --git a/builtin/rev-parse.c b/builtin/rev-parse.c index c76b89dc5b..c4b768ffda 100644 --- a/builtin/rev-parse.c +++ b/builtin/rev-parse.c @@ -279,6 +279,7 @@ static int try_difference(const char *arg) exclude = n; } } + *dotdot = '.'; return 1; } *dotdot = '.'; @@ -302,8 +303,10 @@ static int try_parent_shorthands(const char *arg) return 0; *dotdot = 0; - if (get_sha1_committish(arg, sha1)) + if (get_sha1_committish(arg, sha1)) { + *dotdot = '^'; return 0; + } if (!parents_only) show_rev(NORMAL, sha1, arg); @@ -312,6 +315,7 @@ static int try_parent_shorthands(const char *arg) show_rev(parents_only ? NORMAL : REVERSED, parents->item->object.sha1, arg); + *dotdot = '^'; return 1; } @@ -476,6 +480,7 @@ N_("git rev-parse --parseopt [options] -- [<args>...]\n" int cmd_rev_parse(int argc, const char **argv, const char *prefix) { int i, as_is = 0, verify = 0, quiet = 0, revs_count = 0, type = 0; + int has_dashdash = 0; int output_prefix = 0; unsigned char sha1[20]; const char *name = NULL; @@ -489,6 +494,13 @@ int cmd_rev_parse(int argc, const char **argv, const char *prefix) if (argc > 1 && !strcmp("-h", argv[1])) usage(builtin_rev_parse_usage); + for (i = 1; i < argc; i++) { + if (!strcmp(argv[i], "--")) { + has_dashdash = 1; + break; + } + } + prefix = setup_git_directory(); git_config(git_default_config, NULL); for (i = 1; i < argc; i++) { @@ -765,6 +777,8 @@ int cmd_rev_parse(int argc, const char **argv, const char *prefix) } if (verify) die_no_single_rev(quiet); + if (has_dashdash) + die("bad revision '%s'", arg); as_is = 1; if (!show_file(arg, output_prefix)) continue; diff --git a/contrib/gitview/gitview b/contrib/gitview/gitview index 4c99dfb903..4e23c650fe 100755 --- a/contrib/gitview/gitview +++ b/contrib/gitview/gitview @@ -1205,7 +1205,7 @@ class GitView(object): #The first parent always continue on the same line try: - # check we alreay have the value + # check we already have the value tmp_node_pos = self.nodepos[commit.parent_sha1[0]] except KeyError: self.colours[commit.parent_sha1[0]] = colour diff --git a/contrib/mw-to-git/git-remote-mediawiki.perl b/contrib/mw-to-git/git-remote-mediawiki.perl index 476e0a2bc0..3f8d993afa 100755 --- a/contrib/mw-to-git/git-remote-mediawiki.perl +++ b/contrib/mw-to-git/git-remote-mediawiki.perl @@ -1315,7 +1315,7 @@ sub get_mw_namespace_id { # Store "notANameSpace" as special value for inexisting namespaces my $store_id = ($id || 'notANameSpace'); - # Store explicitely requested namespaces on disk + # Store explicitly requested namespaces on disk if (!exists $cached_mw_namespace_id{$name}) { run_git(qq(config --add remote.${remotename}.namespaceCache "${name}:${store_id}")); $cached_mw_namespace_id{$name} = 1; diff --git a/contrib/mw-to-git/t/test-gitmw-lib.sh b/contrib/mw-to-git/t/test-gitmw-lib.sh index ca6860ff30..3372b2af34 100755 --- a/contrib/mw-to-git/t/test-gitmw-lib.sh +++ b/contrib/mw-to-git/t/test-gitmw-lib.sh @@ -91,7 +91,7 @@ test_diff_directories () { # Check that <dir> contains exactly <N> files test_contains_N_files () { if test `ls -- "$1" | wc -l` -ne "$2"; then - echo "directory $1 sould contain $2 files" + echo "directory $1 should contain $2 files" echo "it contains these files:" ls "$1" false diff --git a/contrib/mw-to-git/t/test.config b/contrib/mw-to-git/t/test.config index 4cfebe9c69..5ba0684162 100644 --- a/contrib/mw-to-git/t/test.config +++ b/contrib/mw-to-git/t/test.config @@ -12,7 +12,7 @@ SERVER_ADDR=localhost TMP=/tmp DB_FILE=wikidb.sqlite -# If LIGHTTPD is not set to true, the script will use the defaut +# If LIGHTTPD is not set to true, the script will use the default # web server running in WIKI_DIR_INST. WIKI_DIR_INST=/var/www diff --git a/git-bisect.sh b/git-bisect.sh index 9f064b6f4f..73b4c14d4f 100755 --- a/git-bisect.sh +++ b/git-bisect.sh @@ -137,7 +137,7 @@ bisect_start() { # cogito usage, and cogito users should understand # it relates to cg-seek. [ -s "$GIT_DIR/head-name" ] && - die "$(gettext "won't bisect on seeked tree")" + die "$(gettext "won't bisect on cg-seek'ed tree")" start_head="${head#refs/heads/}" ;; *) diff --git a/git-submodule.sh b/git-submodule.sh index 896f1c9b82..66f5f752c5 100755 --- a/git-submodule.sh +++ b/git-submodule.sh @@ -612,11 +612,21 @@ cmd_init() fi # Copy "update" setting when it is not set yet - upd="$(git config -f .gitmodules submodule."$name".update)" - test -z "$upd" || - test -n "$(git config submodule."$name".update)" || - git config submodule."$name".update "$upd" || - die "$(eval_gettext "Failed to register update mode for submodule path '\$displaypath'")" + if upd="$(git config -f .gitmodules submodule."$name".update)" && + test -n "$upd" && + test -z "$(git config submodule."$name".update)" + then + case "$upd" in + rebase | merge | none) + ;; # known modes of updating + *) + echo >&2 "warning: unknown update mode '$upd' suggested for submodule '$name'" + upd=none + ;; + esac + git config submodule."$name".update "$upd" || + die "$(eval_gettext "Failed to register update mode for submodule path '\$displaypath'")" + fi done } diff --git a/pathspec.c b/pathspec.c index 4cf2bd365a..87b3b82f1f 100644 --- a/pathspec.c +++ b/pathspec.c @@ -197,11 +197,11 @@ static unsigned prefix_pathspec(struct pathspec_item *item, magic |= short_magic; *p_short_magic = short_magic; - /* --noglob-pathspec adds :(literal) _unless_ :(glob) is specifed */ + /* --noglob-pathspec adds :(literal) _unless_ :(glob) is specified */ if (noglob_global && !(magic & PATHSPEC_GLOB)) global_magic |= PATHSPEC_LITERAL; - /* --glob-pathspec is overriden by :(literal) */ + /* --glob-pathspec is overridden by :(literal) */ if ((global_magic & PATHSPEC_GLOB) && (magic & PATHSPEC_LITERAL)) global_magic &= ~PATHSPEC_GLOB; @@ -72,7 +72,7 @@ msgstr "Archivformat" #: archive.c:328 builtin/log.c:1193 msgid "prefix" -msgstr "Prefix" +msgstr "Präfix" #: archive.c:329 msgid "prepend prefix to each pathname in the archive" @@ -3716,7 +3716,7 @@ msgid "" msgstr "" "Eingabehilfe:\n" "1 - nummeriertes Element auswählen\n" -"foo - Element anhand eines eindeutigen Prefix auswählen\n" +"foo - Element anhand eines eindeutigen Präfix auswählen\n" " - (leer) nichts auswählen" #: builtin/clean.c:298 @@ -3734,7 +3734,7 @@ msgstr "" "1 - einzelnes Element auswählen\n" "3-5 - Bereich von Elementen auswählen\n" "2-3,6-9 - mehrere Bereiche auswählen\n" -"foo - Element anhand eines eindeutigen Prefix auswählen\n" +"foo - Element anhand eines eindeutigen Präfix auswählen\n" "-... - angegebenes Element abwählen\n" "* - alle Elemente auswählen\n" " - (leer) Auswahl beenden" @@ -6452,7 +6452,7 @@ msgstr "kennzeichnet die Serie als n-te Fassung" #: builtin/log.c:1194 msgid "Use [<prefix>] instead of [PATCH]" -msgstr "verwendet [<Prefix>] anstatt [PATCH]" +msgstr "verwendet [<Präfix>] anstatt [PATCH]" #: builtin/log.c:1197 msgid "store resulting files in <dir>" @@ -8182,7 +8182,7 @@ msgid "" "[-u [--exclude-per-directory=<gitignore>] | -i]] [--no-sparse-checkout] [--" "index-output=<file>] (--empty | <tree-ish1> [<tree-ish2> [<tree-ish3>]])" msgstr "" -"git read-tree [[-m [--trivial] [--aggressive] | --reset | --prefix=<Prefix>] " +"git read-tree [[-m [--trivial] [--aggressive] | --reset | --prefix=<Präfix>] " "[-u [--exclude-per-directory=<gitignore>] | -i]] [--no-sparse-checkout] [--" "index-output=<Datei>] (--empty | <Commit-Referenz1> [<Commit-Referenz2> " "[<Commit-Referenz3>]])" @@ -9782,15 +9782,15 @@ msgstr "gibt Tag-Inhalte aus" #: builtin/write-tree.c:13 msgid "git write-tree [--missing-ok] [--prefix=<prefix>/]" -msgstr "git write-tree [--missing-ok] [--prefix=<Prefix>/]" +msgstr "git write-tree [--missing-ok] [--prefix=<Präfix>/]" #: builtin/write-tree.c:26 msgid "<prefix>/" -msgstr "<Prefix>/" +msgstr "<Präfix>/" #: builtin/write-tree.c:27 msgid "write tree object for a subdirectory <prefix>" -msgstr "schreibt das \"Tree\"-Objekt für ein Unterverzeichnis <Prefix>" +msgstr "schreibt das \"Tree\"-Objekt für ein Unterverzeichnis <Präfix>" #: builtin/write-tree.c:30 msgid "only useful for debugging" @@ -22,6 +22,7 @@ static char *do_askpass(const char *cmd, const char *prompt) if (start_command(&pass)) return NULL; + strbuf_reset(&buffer); if (strbuf_read(&buffer, pass.out, 20) < 0) err = 1; @@ -38,7 +39,7 @@ static char *do_askpass(const char *cmd, const char *prompt) strbuf_setlen(&buffer, strcspn(buffer.buf, "\r\n")); - return strbuf_detach(&buffer, NULL); + return buffer.buf; } char *git_prompt(const char *prompt, int flags) diff --git a/sha1_file.c b/sha1_file.c index 7dadd04cb7..760dd60031 100644 --- a/sha1_file.c +++ b/sha1_file.c @@ -2483,15 +2483,18 @@ static int sha1_loose_object_info(const unsigned char *sha1, /* * If we don't care about type or size, then we don't - * need to look inside the object at all. + * need to look inside the object at all. Note that we + * do not optimize out the stat call, even if the + * caller doesn't care about the disk-size, since our + * return value implicitly indicates whether the + * object even exists. */ if (!oi->typep && !oi->sizep) { - if (oi->disk_sizep) { - struct stat st; - if (stat_sha1_file(sha1, &st) < 0) - return -1; + struct stat st; + if (stat_sha1_file(sha1, &st) < 0) + return -1; + if (oi->disk_sizep) *oi->disk_sizep = st.st_size; - } return 0; } @@ -2857,7 +2860,9 @@ static int create_tmpfile(char *buffer, size_t bufsiz, const char *filename) /* Make sure the directory exists */ memcpy(buffer, filename, dirlen); buffer[dirlen-1] = 0; - if (mkdir(buffer, 0777) || adjust_shared_perm(buffer)) + if (mkdir(buffer, 0777) && errno != EEXIST) + return -1; + if (adjust_shared_perm(buffer)) return -1; /* Try again */ diff --git a/t/lib-read-tree.sh b/t/lib-read-tree.sh index abc2c6f57f..ef079afc46 100644 --- a/t/lib-read-tree.sh +++ b/t/lib-read-tree.sh @@ -5,39 +5,39 @@ # write the index and that together with -u it doesn't touch the work tree. # read_tree_must_succeed () { - git ls-files -s >pre-dry-run && - git read-tree -n "$@" && - git ls-files -s >post-dry-run && - test_cmp pre-dry-run post-dry-run && - git read-tree "$@" + git ls-files -s >pre-dry-run && + git read-tree -n "$@" && + git ls-files -s >post-dry-run && + test_cmp pre-dry-run post-dry-run && + git read-tree "$@" } read_tree_must_fail () { - git ls-files -s >pre-dry-run && - test_must_fail git read-tree -n "$@" && - git ls-files -s >post-dry-run && - test_cmp pre-dry-run post-dry-run && - test_must_fail git read-tree "$@" + git ls-files -s >pre-dry-run && + test_must_fail git read-tree -n "$@" && + git ls-files -s >post-dry-run && + test_cmp pre-dry-run post-dry-run && + test_must_fail git read-tree "$@" } read_tree_u_must_succeed () { - git ls-files -s >pre-dry-run && - git diff-files -p >pre-dry-run-wt && - git read-tree -n "$@" && - git ls-files -s >post-dry-run && - git diff-files -p >post-dry-run-wt && - test_cmp pre-dry-run post-dry-run && - test_cmp pre-dry-run-wt post-dry-run-wt && - git read-tree "$@" + git ls-files -s >pre-dry-run && + git diff-files -p >pre-dry-run-wt && + git read-tree -n "$@" && + git ls-files -s >post-dry-run && + git diff-files -p >post-dry-run-wt && + test_cmp pre-dry-run post-dry-run && + test_cmp pre-dry-run-wt post-dry-run-wt && + git read-tree "$@" } read_tree_u_must_fail () { - git ls-files -s >pre-dry-run && - git diff-files -p >pre-dry-run-wt && - test_must_fail git read-tree -n "$@" && - git ls-files -s >post-dry-run && - git diff-files -p >post-dry-run-wt && - test_cmp pre-dry-run post-dry-run && - test_cmp pre-dry-run-wt post-dry-run-wt && - test_must_fail git read-tree "$@" + git ls-files -s >pre-dry-run && + git diff-files -p >pre-dry-run-wt && + test_must_fail git read-tree -n "$@" && + git ls-files -s >post-dry-run && + git diff-files -p >post-dry-run-wt && + test_cmp pre-dry-run post-dry-run && + test_cmp pre-dry-run-wt post-dry-run-wt && + test_must_fail git read-tree "$@" } diff --git a/t/t1005-read-tree-reset.sh b/t/t1005-read-tree-reset.sh index f53de79e56..074568500a 100755 --- a/t/t1005-read-tree-reset.sh +++ b/t/t1005-read-tree-reset.sh @@ -8,84 +8,99 @@ test_description='read-tree -u --reset' # two-tree test test_expect_success 'setup' ' - git init && - mkdir df && - echo content >df/file && - git add df/file && - git commit -m one && - git ls-files >expect && - rm -rf df && - echo content >df && - git add df && - echo content >new && - git add new && - git commit -m two + git init && + mkdir df && + echo content >df/file && + git add df/file && + git commit -m one && + git ls-files >expect && + rm -rf df && + echo content >df && + git add df && + echo content >new && + git add new && + git commit -m two ' test_expect_success 'reset should work' ' - read_tree_u_must_succeed -u --reset HEAD^ && - git ls-files >actual && - test_cmp expect actual + read_tree_u_must_succeed -u --reset HEAD^ && + git ls-files >actual && + test_cmp expect actual ' test_expect_success 'reset should remove remnants from a failed merge' ' - read_tree_u_must_succeed --reset -u HEAD && - git ls-files -s >expect && - sha1=$(git rev-parse :new) && - ( - echo "100644 $sha1 1 old" - echo "100644 $sha1 3 old" - ) | git update-index --index-info && - >old && - git ls-files -s && - read_tree_u_must_succeed --reset -u HEAD && - git ls-files -s >actual && - ! test -f old + read_tree_u_must_succeed --reset -u HEAD && + git ls-files -s >expect && + sha1=$(git rev-parse :new) && + ( + echo "100644 $sha1 1 old" + echo "100644 $sha1 3 old" + ) | git update-index --index-info && + >old && + git ls-files -s && + read_tree_u_must_succeed --reset -u HEAD && + git ls-files -s >actual && + ! test -f old +' + +test_expect_success 'two-way reset should remove remnants too' ' + read_tree_u_must_succeed --reset -u HEAD && + git ls-files -s >expect && + sha1=$(git rev-parse :new) && + ( + echo "100644 $sha1 1 old" + echo "100644 $sha1 3 old" + ) | git update-index --index-info && + >old && + git ls-files -s && + read_tree_u_must_succeed --reset -u HEAD HEAD && + git ls-files -s >actual && + ! test -f old ' test_expect_success 'Porcelain reset should remove remnants too' ' - read_tree_u_must_succeed --reset -u HEAD && - git ls-files -s >expect && - sha1=$(git rev-parse :new) && - ( - echo "100644 $sha1 1 old" - echo "100644 $sha1 3 old" - ) | git update-index --index-info && - >old && - git ls-files -s && - git reset --hard && - git ls-files -s >actual && - ! test -f old + read_tree_u_must_succeed --reset -u HEAD && + git ls-files -s >expect && + sha1=$(git rev-parse :new) && + ( + echo "100644 $sha1 1 old" + echo "100644 $sha1 3 old" + ) | git update-index --index-info && + >old && + git ls-files -s && + git reset --hard && + git ls-files -s >actual && + ! test -f old ' test_expect_success 'Porcelain checkout -f should remove remnants too' ' - read_tree_u_must_succeed --reset -u HEAD && - git ls-files -s >expect && - sha1=$(git rev-parse :new) && - ( - echo "100644 $sha1 1 old" - echo "100644 $sha1 3 old" - ) | git update-index --index-info && - >old && - git ls-files -s && - git checkout -f && - git ls-files -s >actual && - ! test -f old + read_tree_u_must_succeed --reset -u HEAD && + git ls-files -s >expect && + sha1=$(git rev-parse :new) && + ( + echo "100644 $sha1 1 old" + echo "100644 $sha1 3 old" + ) | git update-index --index-info && + >old && + git ls-files -s && + git checkout -f && + git ls-files -s >actual && + ! test -f old ' test_expect_success 'Porcelain checkout -f HEAD should remove remnants too' ' - read_tree_u_must_succeed --reset -u HEAD && - git ls-files -s >expect && - sha1=$(git rev-parse :new) && - ( - echo "100644 $sha1 1 old" - echo "100644 $sha1 3 old" - ) | git update-index --index-info && - >old && - git ls-files -s && - git checkout -f HEAD && - git ls-files -s >actual && - ! test -f old + read_tree_u_must_succeed --reset -u HEAD && + git ls-files -s >expect && + sha1=$(git rev-parse :new) && + ( + echo "100644 $sha1 1 old" + echo "100644 $sha1 3 old" + ) | git update-index --index-info && + >old && + git ls-files -s && + git checkout -f HEAD && + git ls-files -s >actual && + ! test -f old ' test_done diff --git a/t/t1006-cat-file.sh b/t/t1006-cat-file.sh index a420742494..1687098355 100755 --- a/t/t1006-cat-file.sh +++ b/t/t1006-cat-file.sh @@ -85,6 +85,28 @@ $content" git cat-file --batch-check="%(objecttype) %(rest)" >actual && test_cmp expect actual ' + + test -z "$content" || + test_expect_success "--batch without type ($type)" ' + { + echo "$size" && + maybe_remove_timestamp "$content" $no_ts + } >expect && + echo $sha1 | git cat-file --batch="%(objectsize)" >actual.full && + maybe_remove_timestamp "$(cat actual.full)" $no_ts >actual && + test_cmp expect actual + ' + + test -z "$content" || + test_expect_success "--batch without size ($type)" ' + { + echo "$type" && + maybe_remove_timestamp "$content" $no_ts + } >expect && + echo $sha1 | git cat-file --batch="%(objecttype)" >actual.full && + maybe_remove_timestamp "$(cat actual.full)" $no_ts >actual && + test_cmp expect actual + ' } hello_content="Hello World" @@ -194,6 +216,12 @@ test_expect_success "--batch-check for an emtpy line" ' test " missing" = "$(echo | git cat-file --batch-check)" ' +test_expect_success 'empty --batch-check notices missing object' ' + echo "$_z40 missing" >expect && + echo "$_z40" | git cat-file --batch-check="" >actual && + test_cmp expect actual +' + batch_input="$hello_sha1 $commit_sha1 $tag_sha1 diff --git a/t/t1506-rev-parse-diagnosis.sh b/t/t1506-rev-parse-diagnosis.sh index f950c10128..613d9bfe1b 100755 --- a/t/t1506-rev-parse-diagnosis.sh +++ b/t/t1506-rev-parse-diagnosis.sh @@ -196,4 +196,28 @@ test_expect_success 'dotdot is not an empty set' ' test_cmp expect actual ' +test_expect_success 'arg before dashdash must be a revision (missing)' ' + test_must_fail git rev-parse foobar -- 2>stderr && + test_i18ngrep "bad revision" stderr +' + +test_expect_success 'arg before dashdash must be a revision (file)' ' + >foobar && + test_must_fail git rev-parse foobar -- 2>stderr && + test_i18ngrep "bad revision" stderr +' + +test_expect_success 'arg before dashdash must be a revision (ambiguous)' ' + >foobar && + git update-ref refs/heads/foobar HEAD && + { + # we do not want to use rev-parse here, because + # we are testing it + cat .git/refs/heads/foobar && + printf "%s\n" -- + } >expect && + git rev-parse foobar -- >actual && + test_cmp expect actual +' + test_done diff --git a/t/t6131-pathspec-icase.sh b/t/t6131-pathspec-icase.sh index 8d4a7fcb91..a7c7ff5f49 100755 --- a/t/t6131-pathspec-icase.sh +++ b/t/t6131-pathspec-icase.sh @@ -100,4 +100,10 @@ test_expect_success 'match_pathspec_depth matches :(icase)bar with empty prefix' test_cmp expect actual ' +test_expect_success '"git diff" can take magic :(icase) pathspec' ' + echo FOO/BAR >expect && + git diff --name-only HEAD^ HEAD -- ":(icase)foo/bar" >actual && + test_cmp expect actual +' + test_done diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh index b90e985a48..3bfdfed1f7 100755 --- a/t/t7001-mv.sh +++ b/t/t7001-mv.sh @@ -70,6 +70,35 @@ test_expect_success \ rm -f idontexist untracked1 untracked2 \ path0/idontexist path0/untracked1 path0/untracked2 \ .git/index.lock +rmdir path1 + +test_expect_success \ + 'moving to absent target with trailing slash' \ + 'test_must_fail git mv path0/COPYING no-such-dir/ && + test_must_fail git mv path0/COPYING no-such-dir// && + git mv path0/ no-such-dir/ && + test_path_is_dir no-such-dir' + +test_expect_success \ + 'clean up' \ + 'git reset --hard' + +test_expect_success \ + 'moving to existing untracked target with trailing slash' \ + 'mkdir path1 && + git mv path0/ path1/ && + test_path_is_dir path1/path0/' + +test_expect_success \ + 'moving to existing tracked target with trailing slash' \ + 'mkdir path2 && + >path2/file && git add path2/file && + git mv path1/path0/ path2/ && + test_path_is_dir path2/path0/' + +test_expect_success \ + 'clean up' \ + 'git reset --hard' test_expect_success \ 'adding another file' \ diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index f0b33053ab..0825a928df 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -323,6 +323,21 @@ test_expect_success 'submodule update - command in .git/config catches failure' ) ' +test_expect_success 'submodule init does not copy command into .git/config' ' + (cd super && + H=$(git ls-files -s submodule | cut -d" " -f2) && + mkdir submodule1 && + git update-index --add --cacheinfo 160000 $H submodule1 && + git config -f .gitmodules submodule.submodule1.path submodule1 && + git config -f .gitmodules submodule.submodule1.url ../submodule && + git config -f .gitmodules submodule.submodule1.update !false && + git submodule init submodule1 && + echo "none" >expect && + git config submodule.submodule1.update >actual && + test_cmp expect actual + ) +' + test_expect_success 'submodule init picks up rebase' ' (cd super && git config -f .gitmodules submodule.rebasing.update rebase && diff --git a/unpack-trees.c b/unpack-trees.c index 35cb05e92b..ad3e9a04fe 100644 --- a/unpack-trees.c +++ b/unpack-trees.c @@ -1763,14 +1763,23 @@ int twoway_merge(const struct cache_entry * const *src, newtree = NULL; if (current) { - if ((!oldtree && !newtree) || /* 4 and 5 */ - (!oldtree && newtree && - same(current, newtree)) || /* 6 and 7 */ - (oldtree && newtree && - same(oldtree, newtree)) || /* 14 and 15 */ - (oldtree && newtree && - !same(oldtree, newtree) && /* 18 and 19 */ - same(current, newtree))) { + if (current->ce_flags & CE_CONFLICTED) { + if (same(oldtree, newtree) || o->reset) { + if (!newtree) + return deleted_entry(current, current, o); + else + return merged_entry(newtree, current, o); + } + return o->gently ? -1 : reject_merge(current, o); + } + else if ((!oldtree && !newtree) || /* 4 and 5 */ + (!oldtree && newtree && + same(current, newtree)) || /* 6 and 7 */ + (oldtree && newtree && + same(oldtree, newtree)) || /* 14 and 15 */ + (oldtree && newtree && + !same(oldtree, newtree) && /* 18 and 19 */ + same(current, newtree))) { return keep_entry(current, o); } else if (oldtree && !newtree && same(current, oldtree)) { @@ -133,7 +133,7 @@ void *xcalloc(size_t nmemb, size_t size) /* * Limit size of IO chunks, because huge chunks only cause pain. OS X * 64-bit is buggy, returning EINVAL if len >= INT_MAX; and even in - * the absense of bugs, large chunks can result in bad latencies when + * the absence of bugs, large chunks can result in bad latencies when * you decide to kill the process. */ #define MAX_IO_SIZE (8*1024*1024) |