diff options
245 files changed, 6779 insertions, 1669 deletions
diff --git a/Documentation/RelNotes-1.7.1.1.txt b/Documentation/RelNotes-1.7.1.1.txt new file mode 100644 index 0000000000..3f6b3148a3 --- /dev/null +++ b/Documentation/RelNotes-1.7.1.1.txt @@ -0,0 +1,96 @@ +Git v1.7.1.1 Release Notes +========================== + +Fixes since v1.7.1 +------------------ + + * Authentication over http transport can now be made lazily, in that the + request can first go to a URL without username, get a 401 response and + then the client will ask for the username to use. + + * We used to mistakenly think "../work" is a subdirectory of the current + directory when we are in "../work-xyz". + + * The attribute mechanism now allows an entry that uses an attribute + macro that set/unset one attribute, immediately followed by an + overriding setting; this makes attribute macros much easier to use. + + * We didn't recognize timezone "Z" as a synonym for "UTC" (75b37e70). + + * In 1.7.0, read-tree and user commands that use the mechanism such as + checkout and merge were fixed to handle switching between branches one + of which has a file while the other has a directory at the same path + correctly even when there are some "confusing" pathnames in them. But + the algorithm used for this fix was suboptimal and had a terrible + performance degradation especially in larger trees. + + * "git am -3" did not show diagnosis when the patch in the message was corrupt. + + * After "git apply --whitespace=fix" removed trailing blank lines in an + patch in a patch series, it failed to apply later patches that depend + on the presence of such blank lines. + + * "git bundle --stdin" segfaulted. + + * "git checkout" and "git rebase" overwrote paths that are marked "assume + unchanged". + + * "git commit --amend" on a commit with an invalid author-name line that + lacks the display name didn't work. + + * "git describe" did not tie-break tags that point at the same commit + correctly; newer ones are preferred by paying attention to the + tagger date now. + + * "git diff" used to tell underlying xdiff machinery to work very hard to + minimize the output, but this often was spending too many extra cycles + for very little gain. + + * "git diff --color" did not paint extended diff headers per line + (i.e. the coloring escape sequence didn't end at the end of line), + which confused "less -R". + + * "git fetch" over HTTP verifies the downloaded packfiles more robustly. + + * The memory usage by "git index-pack" (run during "git fetch" and "git + push") got leaner. + + * "GIT_DIR=foo.git git init --bare bar.git" created foo.git instead of bar.git. + + * "git log --abbrev=$num --format='%h' ignored --abbrev=$num. + + * "git ls-files ../out/side/cwd" refused to work. + + * "git merge --log" used to replace the custom message given by "-m" with + the shortlog, instead of appending to it. + + * "git notes copy" without any other argument segfaulted. + + * "git pull" accepted "--dry-run", gave it to underlying "git fetch" but + ignored the option itself, resulting in a bogus attempt to merge + unrelated commit. + + * "git rebase" did not faithfully reproduce a malformed author ident, that + is often seen in a repository converted from foreign SCMs. + + * "git reset --hard" started from a wrong directory and a working tree in + a nonstandard location is in use got confused. + + * "git send-email" lacked a way to specify the domainname used in the + EHLO/HELO exchange, causing rejected connection from picky servers. + It learned --smtp-domain option to solve this issue. + + * "git send-email" did not declare a content-transfer-encoding and + content-type even when its payload needs to be sent in 8-bit. + + * "git show -C -C" and other corner cases lost diff metainfo output + in 1.7.0. + + * "git stash" incorrectly lost paths in the working tree that were + previously removed from the index. + + * "git status" stopped refreshing the index by mistake in 1.7.1. + + * "git status" showed excess "hints" even when advice.statusHints is set to false. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.2.txt b/Documentation/RelNotes-1.7.2.txt index 37781b4f14..8ed7406266 100644 --- a/Documentation/RelNotes-1.7.2.txt +++ b/Documentation/RelNotes-1.7.2.txt @@ -4,37 +4,151 @@ Git v1.7.2 Release Notes (draft) Updates since v1.7.1 -------------------- - * After "git apply --whitespace=fix" removed trailing blank lines in an - patch in a patch series, it failed to apply later patches that depend - on the presense of such blank lines. + * core.eol configuration and eol attribute are the new way to control + the end of line conventions for files in the working tree; + core.autocrlf overrides it, keeping the traditional behaviour by + default. + + * The whitespace rules used in "git apply --whitespace" and "git diff" + gained a new member in the family (tab-in-indent) to help projects with + policy to indent only with spaces. + + * When working from a subdirectory, by default, git does not look for its + metadirectory ".git" across filesystems, primarily to help people who + have invocations of git in their custom PS1 prompts, as being outside + of a git repository would look for ".git" all the way up to the root + directory, and NFS mounts are often slow. DISCOVERY_ACROSS_FILESYSTEM + environment variable can be used to tell git not to stop at a + filesystem boundary. + + * Usage help messages generated by parse-options library (i.e. most + of the Porcelain commands) are sent to the standard output now. + + * ':/<string>' notation to look for a commit now takes regular expression + and it is not anchored at the beginning of the commit log message + anymore (this is a backward incompatible change). + + * "git" wrapper learned "-c name=value" option to override configuration + variable from the command line. + + * Improved portability for various platforms including older SunOS, + HP-UX 10/11, AIX, Tru64, etc. and platforms with Python 2.4. + + * The message from "git am -3" has been improved when conflict + resolution ended up making the patch a no-op. + + * "git blame" applies the textconv filter to the contents it works + on, when available. + + * "git checkout --orphan newbranch" is similar to "-b newbranch" but + prepares to create a root commit that is not connected to any existing + commit. + + * "git cherry-pick" learned to pick a range of commits (e.g. "cherry-pick + A..B"); this does not have nicer sequencing control "rebase [-i]" has, + though. + + * "git cvsserver" can be told to use pserver; its password file can be + stored outside the repository. * The output from the textconv filter used by "git diff" can be cached to speed up their reuse. - * "git send-email" learned --smtp-domain option to specify the domainname - used in the EHLO/HELO exchange. + * "git diff --word-diff=<mode>" extends the existing "--color-words" + option, making it more useful in color-challenged environments. + + * The regexp to detect function headers used by "git diff" for PHP has + been enhanced for visibility modifiers (public, protected, etc.) to + better support PHP5. + + * "diff.noprefix" configuration variable can be used to implicitly + ask for "diff --no-prefix" behaviour. + + * "git for-each-ref" learned "%(objectname:short)" that gives the object + name abbreviated. + + * "git format-patch" learned --signature option and format.signature + configuration variable to customize the e-mail signature used in the + output. + + * Various options to "git grep" (e.g. --count, --name-only) work better + with binary files. + + * "git help -w" learned "chrome" and "chromium" browsers. + + * "git log --follow <path>" follows across copies (it used to only follow + renames). This may make the processing more expensive. + + * "git log --pretty=format:<template>" specifier learned "% <something>" + magic that inserts a space only when %<something> expands to a + non-empty string; this is similar to "%+<something>" magic, but is + useful in a context to generate a single line output. + + * "git notes prune" learned "-n" (dry-run) and "-v" options, similar to + what "git prune" has. + + * "git patch-id" can be fed a mbox without getting confused by the + signature line in the format-patch output. + + * "git remote" learned "set-branches" subcommand. * "git revert" learned --strategy option to specify the merge strategy. - * The whitespace rules used in "git apply --whitespace" and "git diff" - gained a new member in the family (tab-in-indent) to help projects with - policy to indent only with spaces. + * "git rev-list A..B" learned --ancestry-path option to further limit + the result to the commits that are on the ancestry chain between A and + B (i.e. commits that are not descendants of A are excluded). + + * "git show -5" is equivalent to "git show --do-walk 5"; this is similar + to the update to make "git show master..next" walk the history, + introduced in 1.6.4. + + * "git status [-s] --ignored" can be used to list ignored paths. + + * "git status -s -b" shows the current branch in the output. - * Authentication over http transport can now be made lazily, in that the - request can first go to a URL without username, get a 401 response and - then the client will ask for the username to use. + * Various "gitweb" enhancements and clean-ups, including syntax + highlighting, "plackup" support for instaweb, .fcgi suffix to run + it as FastCGI script, etc. Fixes since v1.7.1 ------------------ - * In 1.7.1, "git status" stopped refreshing the index by mistake. - All of the fixes in v1.7.1.X maintenance series are included in this release, unless otherwise noted. + * We didn't URL decode "file:///path/to/repo" correctly when path/to/repo + had percent-encoded characters (638794c, 9d2e942). + + * "git commit" did not honor GIT_REFLOG_ACTION environment variable, resulting + reflog messages for cherry-pick and revert actions to be recorded as "commit". + + * "git clone/fetch/pull" issued an incorrect error message when a ref and + a symref that points to the ref were updated at the same time. This + obviously would update them to the same value, and should not result in + an error condition (0e71bc3). + + * "git clone" did not configure remote.origin.url correctly for bare + clones (df61c889). + + * "git diff" inside a tree with many pathnames that have certain + characters has become very slow in 1.7.0 by mistake (will merge + e53e6b443 to 'maint'). + + * "git diff --graph" works better with "--color-words" and other options + (81fa024..4297c0a). + + * "git diff" could show ambiguous abbreviation of blob object names on + its "index" line (3e5a188). + + * "git rebase" did not faithfully reproduce a malformed author ident, that + is often seen in a repository converted from foreign SCMs (43c23251). + + * "git reset --hard" started from a wrong directory and a working tree in + a nonstandard location is in use got confused (560fb6a1). + -- exec >/var/tmp/1 -O=v1.7.1-77-gb751157 -echo O=$(git describe master) -git shortlog --no-merges master ^maint ^$O +O=v1.7.1-592-gcf4403a +echo O=$(git describe HEAD) +git shortlog --no-merges HEAD ^maint ^$O diff --git a/Documentation/config.txt b/Documentation/config.txt index 85f763c4d0..4c491045c9 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -196,20 +196,17 @@ core.quotepath:: quoted without `-z` regardless of the setting of this variable. -core.autocrlf:: - If true, makes git convert `CRLF` at the end of lines in text files to - `LF` when reading from the work tree, and convert in reverse when - writing to the work tree. The variable can be set to - 'input', in which case the conversion happens only while - reading from the work tree but files are written out to the work - tree with `LF` at the end of lines. A file is considered - "text" (i.e. be subjected to the autocrlf mechanism) based on - the file's `crlf` attribute, or if `crlf` is unspecified, - based on the file's contents. See linkgit:gitattributes[5]. +core.eol:: + Sets the line ending type to use in the working directory for + files that have the `text` property set. Alternatives are + 'lf', 'crlf' and 'native', which uses the platform's native + line ending. The default value is `native`. See + linkgit:gitattributes[5] for more information on end-of-line + conversion. core.safecrlf:: - If true, makes git check if converting `CRLF` as controlled by - `core.autocrlf` is reversible. Git will verify if a command + If true, makes git check if converting `CRLF` is reversible when + end-of-line conversion is active. Git will verify if a command modifies a file in the work tree either directly or indirectly. For example, committing a file followed by checking out the same file should yield the original file in the work tree. If @@ -219,7 +216,7 @@ core.safecrlf:: irreversible conversion but continue the operation. + CRLF conversion bears a slight chance of corrupting data. -autocrlf=true will convert CRLF to LF during commit and LF to +When it is enabled, git will convert CRLF to LF during commit and LF to CRLF during checkout. A file that contains a mixture of LF and CRLF before the commit cannot be recreated by git. For text files this is the right thing to do: it corrects line endings @@ -243,15 +240,25 @@ converting CRLFs corrupts data. + Note, this safety check does not mean that a checkout will generate a file identical to the original file for a different setting of -`core.autocrlf`, but only for the current one. For example, a text -file with `LF` would be accepted with `core.autocrlf=input` and could -later be checked out with `core.autocrlf=true`, in which case the +`core.eol` and `core.autocrlf`, but only for the current one. For +example, a text file with `LF` would be accepted with `core.eol=lf` +and could later be checked out with `core.eol=crlf`, in which case the resulting file would contain `CRLF`, although the original file contained `LF`. However, in both work trees the line endings would be consistent, that is either all `LF` or all `CRLF`, but never mixed. A file with mixed line endings would be reported by the `core.safecrlf` mechanism. +core.autocrlf:: + Setting this variable to "true" is almost the same as setting + the `text` attribute to "auto" on all files except that text + files are not guaranteed to be normalized: files that contain + `CRLF` in the repository will not be touched. Use this + setting if you want to have `CRLF` line endings in your + working directory even though the repository does not have + normalized line endings. This variable can be set to 'input', + in which case no output conversion is performed. + core.symlinks:: If false, symbolic links are checked out as small plain files that contain the link text. linkgit:git-update-index[1] and @@ -520,18 +527,12 @@ check that makes sure that existing object files will not get overwritten. core.notesRef:: When showing commit messages, also show notes which are stored in - the given ref. This ref is expected to contain files named - after the full SHA-1 of the commit they annotate. The ref - must be fully qualified. + the given ref. The ref must be fully qualified. If the given + ref does not exist, it is not an error but means that no + notes should be printed. + -If such a file exists in the given ref, the referenced blob is read, and -appended to the commit message, separated by a "Notes (<refname>):" -line (shortened to "Notes:" in the case of "refs/notes/commits"). If the -given ref itself does not exist, it is not an error, but means that no -notes should be printed. -+ -This setting defaults to "refs/notes/commits", and can be overridden by -the `GIT_NOTES_REF` environment variable. +This setting defaults to "refs/notes/commits", and it can be overridden by +the 'GIT_NOTES_REF' environment variable. See linkgit:git-notes[1]. core.sparseCheckout:: Enable "sparse checkout" feature. See section "Sparse checkout" in @@ -798,6 +799,8 @@ diff.mnemonicprefix:: standard "a/" and "b/" depending on what is being compared. When this configuration is in effect, reverse diff output also swaps the order of the prefixes: +diff.noprefix:: + If set, 'git diff' does not show any source or destination prefix. `git diff`;; compares the (i)ndex and the (w)ork tree; `git diff HEAD`;; @@ -886,6 +889,12 @@ format.subjectprefix:: The default for format-patch is to output files with the '[PATCH]' subject prefix. Use this variable to change that prefix. +format.signature:: + The default for format-patch is to output a signature containing + the git version number. Use this variable to change that default. + Set this variable to the empty string ("") to suppress + signature generation. + format.suffix:: The default for format-patch is to output files with the suffix `.patch`. Use this variable to change that suffix (make sure to @@ -983,13 +992,15 @@ gitcvs.logfile:: various stuff. See linkgit:git-cvsserver[1]. gitcvs.usecrlfattr:: - If true, the server will look up the `crlf` attribute for - files to determine the '-k' modes to use. If `crlf` is set, - the '-k' mode will be left blank, so cvs clients will - treat it as text. If `crlf` is explicitly unset, the file + If true, the server will look up the end-of-line conversion + attributes for files to determine the '-k' modes to use. If + the attributes force git to treat a file as text, + the '-k' mode will be left blank so cvs clients will + treat it as text. If they suppress text conversion, the file will be set with '-kb' mode, which suppresses any newline munging - the client might otherwise do. If `crlf` is not specified, - then 'gitcvs.allbinary' is used. See linkgit:gitattributes[5]. + the client might otherwise do. If the attributes do not allow + the file type to be determined, then 'gitcvs.allbinary' is + used. See linkgit:gitattributes[5]. gitcvs.allbinary:: This is used if 'gitcvs.usecrlfattr' does not resolve @@ -1481,6 +1492,16 @@ pager.<cmd>:: it takes precedence over this option. To disable pagination for all commands, set `core.pager` or `GIT_PAGER` to `cat`. +pretty.<name>:: + Alias for a --pretty= format string, as specified in + linkgit:git-log[1]. Any aliases defined here can be used just + as the built-in pretty formats could. For example, + running `git config pretty.changelog "format:{asterisk} %H %s"` + would cause the invocation `git log --pretty=changelog` + to be equivalent to running `git log "--pretty=format:{asterisk} %H %s"`. + Note that an alias with the same name as a built-in format + will be silently ignored. + pull.octopus:: The default merge strategy to use when pulling multiple branches at once. diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 0d89aaaf2a..2371262b10 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -210,7 +210,14 @@ endif::git-format-patch[] Break complete rewrite changes into pairs of delete and create. -M:: +ifndef::git-log[] Detect renames. +endif::git-log[] +ifdef::git-log[] + If generating diffs, detect and report renames for each commit. + For following files across renames while traversing history, see + `--follow`. +endif::git-log[] -C:: Detect copies as well as renames. See also `--find-copies-harder`. @@ -321,8 +328,14 @@ endif::git-format-patch[] --no-ext-diff:: Disallow external diff drivers. ---ignore-submodules:: - Ignore changes to submodules in the diff generation. +--ignore-submodules[=<when>]:: + Ignore changes to submodules in the diff generation. <when> can be + either "untracked", "dirty" or "all", which is the default. When + "untracked" is used submodules are not considered dirty when they only + contain untracked content (but they are still scanned for modified + content). Using "dirty" ignores all changes to the work tree of submodules, + only changes to the commits stored in the superproject are shown (this was + the behavior until 1.7.0). Using "all" hides all changes to submodules. --src-prefix=<prefix>:: Show the given source prefix instead of "a/". diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index 51cbeb7032..74741a42f4 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -266,9 +266,9 @@ patch:: y - stage this hunk n - do not stage this hunk - q - quit, do not stage this hunk nor any of the remaining ones - a - stage this and all the remaining hunks in the file - d - do not stage this hunk nor any of the remaining hunks in the file + q - quit; do not stage this hunk nor any of the remaining ones + a - stage this hunk and all later hunks in the file + d - do not stage this hunk nor any of the later hunks in the file g - select a hunk to go to / - search for a hunk matching the given regex j - leave this hunk undecided, see next undecided hunk diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index 58c8d65772..9ebbe9402b 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -9,14 +9,15 @@ git-cat-file - Provide content or type and size information for repository objec SYNOPSIS -------- [verse] -'git cat-file' (-t | -s | -e | -p | <type>) <object> +'git cat-file' (-t | -s | -e | -p | <type> | --textconv ) <object> 'git cat-file' (--batch | --batch-check) < <list-of-objects> DESCRIPTION ----------- In its first form, the command provides the content or the type of an object in the repository. The type is required unless '-t' or '-p' is used to find the -object type, or '-s' is used to find the object size. +object type, or '-s' is used to find the object size, or '--textconv' is used +(which implies type "blob"). In the second form, a list of objects (separated by linefeeds) is provided on stdin, and the SHA1, type, and size of each object is printed on stdout. @@ -51,6 +52,11 @@ OPTIONS or to ask for a "blob" with <object> being a tag object that points at it. +--textconv:: + Show the content as transformed by a textconv filter. In this case, + <object> has be of the form <treeish>:<path>, or :<path> in order + to apply the filter to the content recorded in the index at <path>. + --batch:: Print the SHA1, type, size, and contents of each object provided on stdin. May not be combined with any other options or arguments. diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 4505eb6d84..261dd90c38 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -15,33 +15,41 @@ SYNOPSIS DESCRIPTION ----------- - -When <paths> are not given, this command switches branches by -updating the index, working tree, and HEAD to reflect the specified +Updates files in the working tree to match the version in the index +or the specified tree. If no paths are given, 'git checkout' will +also update `HEAD` to set the specified branch as the current branch. -If `-b` is given, a new branch is created and checked out, as if -linkgit:git-branch[1] were called; in this case you can -use the --track or --no-track options, which will be passed to `git -branch`. As a convenience, --track without `-b` implies branch -creation; see the description of --track below. - -When <paths> or --patch are given, this command does *not* switch -branches. It updates the named paths in the working tree from -the index file, or from a named <tree-ish> (most often a commit). In -this case, the `-b` and `--track` options are meaningless and giving -either of them results in an error. The <tree-ish> argument can be -used to specify a specific tree-ish (i.e. commit, tag or tree) -to update the index for the given paths before updating the -working tree. - -The index may contain unmerged entries after a failed merge. By -default, if you try to check out such an entry from the index, the +'git checkout' [<branch>]:: +'git checkout' -b <new branch> [<start point>]:: + + This form switches branches by updating the index, working + tree, and HEAD to reflect the specified branch. ++ +If `-b` is given, a new branch is created as if linkgit:git-branch[1] +were called and then checked out; in this case you can +use the `--track` or `--no-track` options, which will be passed to +'git branch'. As a convenience, `--track` without `-b` implies branch +creation; see the description of `--track` below. + +'git checkout' [--patch] [<tree-ish>] [--] <pathspec>...:: + + When <paths> or `--patch` are given, 'git checkout' *not* switch + branches. It updates the named paths in the working tree from + the index file or from a named <tree-ish> (most often a commit). In + this case, the `-b` and `--track` options are meaningless and giving + either of them results in an error. The <tree-ish> argument can be + used to specify a specific tree-ish (i.e. commit, tag or tree) + to update the index for the given paths before updating the + working tree. ++ +The index may contain unmerged entries because of a previous failed merge. +By default, if you try to check out such an entry from the index, the checkout operation will fail and nothing will be checked out. -Using -f will ignore these unmerged entries. The contents from a +Using `-f` will ignore these unmerged entries. The contents from a specific side of the merge can be checked out of the index by -using --ours or --theirs. With -m, changes made to the working tree -file can be discarded to recreate the original conflicted merge result. +using `--ours` or `--theirs`. With `-m`, changes made to the working tree +file can be discarded to re-create the original conflicted merge result. OPTIONS ------- @@ -91,22 +99,29 @@ explicitly give a name with '-b' in such a case. details. --orphan:: - Create a new branch named <new_branch>, unparented to any other - branch. The new branch you switch to does not have any commit - and after the first one it will become the root of a new history - completely unconnected from all the other branches. + Create a new 'orphan' branch, named <new_branch>, started from + <start_point> and switch to it. The first commit made on this + new branch will have no parents and it will be the root of a new + history totally disconnected from all the other branches and + commits. ++ +The index and the working tree are adjusted as if you had previously run +"git checkout <start_point>". This allows you to start a new history +that records a set of paths similar to <start_point> by easily running +"git commit -a" to make the root commit. + -When you use "--orphan", the index and the working tree are kept intact. -This allows you to start a new history that records set of paths similar -to that of the start-point commit, which is useful when you want to keep -different branches for different audiences you are working to like when -you have an open source and commercial versions of a software, for example. +This can be useful when you want to publish the tree from a commit +without exposing its full history. You might want to do this to publish +an open source branch of a project whose current tree is "clean", but +whose full history contains proprietary or otherwise encumbered bits of +code. + -If you want to start a disconnected history that records set of paths -totally different from the original branch, you may want to first clear -the index and the working tree, by running "git rm -rf ." from the -top-level of the working tree, before preparing your files (by copying -from elsewhere, extracting a tarball, etc.) in the working tree. +If you want to start a disconnected history that records a set of paths +that is totally different from the one of <start_point>, then you should +clear the index and the working tree right after creating the orphan +branch by running "git rm -rf ." from the top level of the working tree. +Afterwards you will be ready to prepare your new files, repopulating the +working tree, by copying them from elsewhere, extracting a tarball, etc. -m:: --merge:: @@ -154,6 +169,10 @@ edits from your current working tree. As a special case, the `"@\{-N\}"` syntax for the N-th last branch checks out the branch (instead of detaching). You may also specify `-` which is synonymous with `"@\{-1\}"`. ++ +As a further special case, you may use `"A...B"` as a shortcut for the +merge base of `A` and `B` if there is exactly one merge base. You can +leave out at most one of `A` and `B`, in which case it defaults to `HEAD`. <new_branch>:: Name for the new branch. diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 32c482f33f..c28603ecf5 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -95,10 +95,11 @@ OPTIONS read the message from the standard input. --author=<author>:: - Override the author name used in the commit. You can use the - standard `A U Thor <author@example.com>` format. Otherwise, - an existing commit that matches the given string and its author - name is used. + Override the commit author. Specify an explicit author using the + standard `A U Thor <author@example.com>` format. Otherwise <author> + is assumed to be a pattern and is used to search for an existing + commit by that author (i.e. rev-list --all -i --author=<author>); + the commit author is then copied from the first such commit found. --date=<date>:: Override the author date used in the commit. diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index dbb053ee17..7004dd2dec 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -72,9 +72,6 @@ plugin. Most functionality works fine with both of these clients. LIMITATIONS ----------- -Currently cvsserver works over SSH connections for read/write clients, and -over pserver for anonymous CVS access. - CVS clients cannot tag, branch or perform GIT merges. 'git-cvsserver' maps GIT branches to CVS modules. This is very different @@ -84,7 +81,7 @@ one or more directories. INSTALLATION ------------ -1. If you are going to offer anonymous CVS access via pserver, add a line in +1. If you are going to offer CVS access via pserver, add a line in /etc/inetd.conf like + -- @@ -101,6 +98,38 @@ looks like cvspserver stream tcp nowait nobody /usr/bin/git-cvsserver git-cvsserver pserver ------ + +Only anonymous access is provided by pserve by default. To commit you +will have to create pserver accounts, simply add a gitcvs.authdb +setting in the config file of the repositories you want the cvsserver +to allow writes to, for example: + +------ + + [gitcvs] + authdb = /etc/cvsserver/passwd + +------ +The format of these files is username followed by the crypted password, +for example: + +------ + myuser:$1Oyx5r9mdGZ2 + myuser:$1$BA)@$vbnMJMDym7tA32AamXrm./ +------ +You can use the 'htpasswd' facility that comes with Apache to make these +files, but Apache's MD5 crypt method differs from the one used by most C +library's crypt() function, so don't use the -m option. + +Alternatively you can produce the password with perl's crypt() operator: +----- + perl -e 'my ($user, $pass) = @ARGV; printf "%s:%s\n", $user, crypt($user, $pass)' $USER password +----- + +Then provide your password via the pserver method, for example: +------ + cvs -d:pserver:someuser:somepassword <at> server/path/repo.git co <HEAD_name> +------ No special setup is needed for SSH access, other than having GIT tools in the PATH. If you have clients that do not accept the CVS_SERVER environment variable, you can rename 'git-cvsserver' to `cvs`. @@ -340,16 +369,13 @@ By default the server leaves the '-k' mode blank for all files, which causes the cvs client to treat them as a text files, subject to crlf conversion on some platforms. -You can make the server use `crlf` attributes to set the '-k' modes -for files by setting the `gitcvs.usecrlfattr` config variable. -In this case, if `crlf` is explicitly unset ('-crlf'), then the -server will set '-kb' mode for binary files. If `crlf` is set, -then the '-k' mode will explicitly be left blank. See -also linkgit:gitattributes[5] for more information about the `crlf` -attribute. +You can make the server use the end-of-line conversion attributes to +set the '-k' modes for files by setting the `gitcvs.usecrlfattr` +config variable. See linkgit:gitattributes[5] for more information +about end-of-line conversion. Alternatively, if `gitcvs.usecrlfattr` config is not enabled -or if the `crlf` attribute is unspecified for a filename, then +or the attributes do not allow automatic detection for a filename, then the server uses the `gitcvs.allbinary` config for the default setting. If `gitcvs.allbinary` is set, then file not otherwise specified will default to '-kb' mode. Otherwise the '-k' mode diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 835fb7135b..c8c81e8437 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -13,6 +13,7 @@ SYNOPSIS [--no-thread | --thread[=<style>]] [(--attach|--inline)[=<boundary>] | --no-attach] [-s | --signoff] + [--signature=<signature> | --no-signature] [-n | --numbered | -N | --no-numbered] [--start-number <n>] [--numbered-files] [--in-reply-to=Message-Id] [--suffix=.<sfx>] @@ -180,6 +181,12 @@ will want to ensure that threading is disabled for `git send-email`. containing the shortlog and the overall diffstat. You can fill in a description in the file before sending it out. +--[no]-signature=<signature>:: + Add a signature to each message produced. Per RFC 3676 the signature + is separated from the body by a line with '-- ' on it. If the + signature option is omitted the signature defaults to the git version + number. + --suffix=.<sfx>:: Instead of using `.patch` as the suffix for generated filenames, use specified suffix. A common alternative is diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index 4b32322a67..5474dd7f94 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -14,6 +14,7 @@ SYNOPSIS [-E | --extended-regexp] [-G | --basic-regexp] [-F | --fixed-strings] [-n] [-l | --files-with-matches] [-L | --files-without-match] + [(-O | --open-files-in-pager) [<pager>]] [-z | --null] [-c | --count] [--all-match] [-q | --quiet] [--max-depth <depth>] @@ -104,6 +105,13 @@ OPTIONS For better compatibility with 'git diff', `--name-only` is a synonym for `--files-with-matches`. +-O [<pager>]:: +--open-files-in-pager [<pager>]:: + Open the matching files in the pager (not the output of 'grep'). + If the pager happens to be "less" or "vi", and the user + specified only one pattern, the first file is positioned at + the first match automatically. + -z:: --null:: Output \0 instead of the character that normally follows a @@ -183,7 +191,7 @@ OPTIONS Examples -------- -git grep 'time_t' -- '*.[ch]':: +git grep 'time_t' \-- '*.[ch]':: Looks for `time_t` in all tracked .c and .h files in the working directory and its subdirectories. diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt index a1f17df074..2c3c4d2994 100644 --- a/Documentation/git-instaweb.txt +++ b/Documentation/git-instaweb.txt @@ -29,7 +29,7 @@ OPTIONS The HTTP daemon command-line that will be executed. Command-line options may be specified here, and the configuration file will be added at the end of the command-line. - Currently apache2, lighttpd, mongoose and webrick are supported. + Currently apache2, lighttpd, mongoose, plackup and webrick are supported. (Default: lighttpd) -m:: diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index a2d55f9745..0e6ff31823 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -133,6 +133,48 @@ Discussion include::i18n.txt[] +Configuration +------------- + +See linkgit:git-config[1] for core variables and linkgit:git-diff[1] +for settings related to diff generation. + +format.pretty:: + Default for the `--format` option. (See "PRETTY FORMATS" above.) + Defaults to "medium". + +i18n.logOutputEncoding:: + Encoding to use when displaying logs. (See "Discussion", above.) + Defaults to the value of `i18n.commitEncoding` if set, UTF-8 + otherwise. + +log.date:: + Default format for human-readable dates. (Compare the + `--date` option.) Defaults to "default", which means to write + dates like `Sat May 8 19:35:34 2010 -0500`. + +log.showroot:: + If `false`, 'git log' and related commands will not treat the + initial commit as a big creation event. Any root commits in + `git log -p` output would be shown without a diff attached. + The default is `true`. + +mailmap.file:: + See linkgit:git-shortlog[1]. + +notes.displayRef:: + Which refs, in addition to the default set by `core.notesRef` + or 'GIT_NOTES_REF', to read notes from when showing commit + messages with the 'log' family of commands. See + linkgit:git-notes[1]. ++ +May be an unabbreviated ref name or a glob and may be specified +multiple times. A warning will be issued for refs that do not exist, +but a glob that does not match any refs is silently ignored. ++ +This setting can be disabled by the `--no-standard-notes` option, +overridden by the 'GIT_NOTES_DISPLAY_REF' environment variable, +and supplemented by the `--show-notes` option. Author ------ diff --git a/Documentation/git-mailinfo.txt b/Documentation/git-mailinfo.txt index e3d58cbac3..3ea5aad56c 100644 --- a/Documentation/git-mailinfo.txt +++ b/Documentation/git-mailinfo.txt @@ -40,16 +40,16 @@ OPTIONS -u:: The commit log message, author name and author email are taken from the e-mail, and after minimally decoding MIME - transfer encoding, re-coded in UTF-8 by transliterating + transfer encoding, re-coded in the charset specified by + i18n.commitencoding (defaulting to UTF-8) by transliterating them. This used to be optional but now it is the default. + Note that the patch is always used as-is without charset conversion, even with this flag. --encoding=<encoding>:: - Similar to -u but if the local convention is different - from what is specified by i18n.commitencoding, this flag - can be used to override it. + Similar to -u. But when re-coding, the charset specified here is + used instead of the one specified by i18n.commitencoding or UTF-8. -n:: Disable all charset re-coding of the metadata. diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index c2325ef90e..84043cc5b2 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -58,7 +58,12 @@ include::merge-options.txt[] -m <msg>:: Set the commit message to be used for the merge commit (in - case one is created). The 'git fmt-merge-msg' command can be + case one is created). + + If `--log` is specified, a shortlog of the commits being merged + will be appended to the specified message. + + The 'git fmt-merge-msg' command can be used to give a good default for automated 'git merge' invocations. diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt index 4e5113b837..5540af5d16 100644 --- a/Documentation/git-notes.txt +++ b/Documentation/git-notes.txt @@ -3,7 +3,7 @@ git-notes(1) NAME ---- -git-notes - Add/inspect object notes +git-notes - Add or inspect object notes SYNOPSIS -------- @@ -15,29 +15,31 @@ SYNOPSIS 'git notes' edit [<object>] 'git notes' show [<object>] 'git notes' remove [<object>] -'git notes' prune +'git notes' prune [-n | -v] DESCRIPTION ----------- -This command allows you to add/remove notes to/from objects, without -changing the objects themselves. +Adds, removes, or reads notes attached to objects, without touching +the objects themselves. -A typical use of notes is to extend a commit message without having -to change the commit itself. Such commit notes can be shown by `git log` -along with the original commit message. To discern these notes from the +By default, notes are saved to and read from `refs/notes/commits`, but +this default can be overridden. See the OPTIONS, CONFIGURATION, and +ENVIRONMENT sections below. If this ref does not exist, it will be +quietly created when it is first needed to store a note. + +A typical use of notes is to supplement a commit message without +changing the commit itself. Notes can be shown by 'git log' along with +the original commit message. To distinguish these notes from the message stored in the commit object, the notes are indented like the message, after an unindented line saying "Notes (<refname>):" (or -"Notes:" for the default setting). +"Notes:" for `refs/notes/commits`). -This command always manipulates the notes specified in "core.notesRef" -(see linkgit:git-config[1]), which can be overridden by GIT_NOTES_REF. -To change which notes are shown by 'git-log', see the -"notes.displayRef" configuration. +To change which notes are shown by 'git log', see the +"notes.displayRef" configuration in linkgit:git-log[1]. -See the description of "notes.rewrite.<command>" in -linkgit:git-config[1] for a way of carrying your notes across commands -that rewrite commits. +See the "notes.rewrite.<command>" configuration for a way to carry +notes across commands that rewrite commits. SUBCOMMANDS @@ -101,15 +103,20 @@ OPTIONS Use the given note message (instead of prompting). If multiple `-m` options are given, their values are concatenated as separate paragraphs. + Lines starting with `#` and empty lines other than a + single line between paragraphs will be stripped out. -F <file>:: --file=<file>:: Take the note message from the given file. Use '-' to read the note message from the standard input. + Lines starting with `#` and empty lines other than a + single line between paragraphs will be stripped out. -C <object>:: --reuse-message=<object>:: - Reuse the note message from the given note object. + Take the note message from the given blob object (for + example, another note). -c <object>:: --reedit-message=<object>:: @@ -117,22 +124,151 @@ OPTIONS the user can further edit the note message. --ref <ref>:: - Manipulate the notes tree in <ref>. This overrides both - GIT_NOTES_REF and the "core.notesRef" configuration. The ref + Manipulate the notes tree in <ref>. This overrides + 'GIT_NOTES_REF' and the "core.notesRef" configuration. The ref is taken to be in `refs/notes/` if it is not qualified. +-n:: + Do not remove anything; just report the object names whose notes + would be removed. + +-v:: + Report all object names whose notes are removed. + + +DISCUSSION +---------- -NOTES ------ +Commit notes are blobs containing extra information about an object +(usually information to supplement a commit's message). These blobs +are taken from notes refs. A notes ref is usually a branch which +contains "files" whose paths are the object names for the objects +they describe, with some directory separators included for performance +reasons footnote:[Permitted pathnames have the form +'ab'`/`'cd'`/`'ef'`/`'...'`/`'abcdef...': a sequence of directory +names of two hexadecimal digits each followed by a filename with the +rest of the object ID.]. Every notes change creates a new commit at the specified notes ref. You can therefore inspect the history of the notes by invoking, e.g., -`git log -p notes/commits`. +`git log -p notes/commits`. Currently the commit message only records +which operation triggered the update, and the commit authorship is +determined according to the usual rules (see linkgit:git-commit[1]). +These details may change in the future. + +It is also permitted for a notes ref to point directly to a tree +object, in which case the history of the notes can be read with +`git log -p -g <refname>`. + + +EXAMPLES +-------- + +You can use notes to add annotations with information that was not +available at the time a commit was written. + +------------ +$ git notes add -m 'Tested-by: Johannes Sixt <j6t@kdbg.org>' 72a144e2 +$ git show -s 72a144e +[...] + Signed-off-by: Junio C Hamano <gitster@pobox.com> + +Notes: + Tested-by: Johannes Sixt <j6t@kdbg.org> +------------ + +In principle, a note is a regular Git blob, and any kind of +(non-)format is accepted. You can binary-safely create notes from +arbitrary files using 'git hash-object': + +------------ +$ cc *.c +$ blob=$(git hash-object -w a.out) +$ git notes --ref=built add -C "$blob" HEAD +------------ + +Of course, it doesn't make much sense to display non-text-format notes +with 'git log', so if you use such notes, you'll probably need to write +some special-purpose tools to do something useful with them. + + +CONFIGURATION +------------- -Currently the commit message only records which operation triggered -the update, and the commit authorship is determined according to the -usual rules (see linkgit:git-commit[1]). These details may change in -the future. +core.notesRef:: + Notes ref to read and manipulate instead of + `refs/notes/commits`. Must be an unabbreviated ref name. + This setting can be overridden through the environment and + command line. + +notes.displayRef:: + Which ref (or refs, if a glob or specified more than once), in + addition to the default set by `core.notesRef` or + 'GIT_NOTES_REF', to read notes from when showing commit + messages with the 'git log' family of commands. + This setting can be overridden on the command line or by the + 'GIT_NOTES_DISPLAY_REF' environment variable. + See linkgit:git-log[1]. + +notes.rewrite.<command>:: + When rewriting commits with <command> (currently `amend` or + `rebase`), if this variable is `false`, git will not copy + notes from the original to the rewritten commit. Defaults to + `true`. See also "`notes.rewriteRef`" below. ++ +This setting can be overridden by the 'GIT_NOTES_REWRITE_REF' +environment variable. + +notes.rewriteMode:: + When copying notes during a rewrite, what to do if the target + commit already has a note. Must be one of `overwrite`, + `concatenate`, and `ignore`. Defaults to `concatenate`. ++ +This setting can be overridden with the `GIT_NOTES_REWRITE_MODE` +environment variable. + +notes.rewriteRef:: + When copying notes during a rewrite, specifies the (fully + qualified) ref whose notes should be copied. May be a glob, + in which case notes in all matching refs will be copied. You + may also specify this configuration several times. ++ +Does not have a default value; you must configure this variable to +enable note rewriting. ++ +Can be overridden with the 'GIT_NOTES_REWRITE_REF' environment variable. + + +ENVIRONMENT +----------- + +'GIT_NOTES_REF':: + Which ref to manipulate notes from, instead of `refs/notes/commits`. + This overrides the `core.notesRef` setting. + +'GIT_NOTES_DISPLAY_REF':: + Colon-delimited list of refs or globs indicating which refs, + in addition to the default from `core.notesRef` or + 'GIT_NOTES_REF', to read notes from when showing commit + messages. + This overrides the `notes.displayRef` setting. ++ +A warning will be issued for refs that do not exist, but a glob that +does not match any refs is silently ignored. + +'GIT_NOTES_REWRITE_MODE':: + When copying notes during a rewrite, what to do if the target + commit already has a note. + Must be one of `overwrite`, `concatenate`, and `ignore`. + This overrides the `core.rewriteMode` setting. + +'GIT_NOTES_REWRITE_REF':: + When rewriting commits, which notes to copy from the original + to the rewritten commit. Must be a colon-delimited list of + refs or globs. ++ +If not set in the environment, the list of notes to copy depends +on the `notes.rewrite.<command>` and `notes.rewriteRef` settings. Author diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 5863decdc9..be23ad2359 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -206,6 +206,10 @@ OPTIONS --onto option is not specified, the starting point is <upstream>. May be any valid commit, and not just an existing branch name. ++ +As a special case, you may use "A...B" as a shortcut for the +merge base of A and B if there is exactly one merge base. You can +leave out at most one of A and B, in which case it defaults to HEAD. <upstream>:: Upstream branch to compare against. May be any valid commit, @@ -306,6 +310,11 @@ link:howto/revert-a-faulty-merge.txt[revert-a-faulty-merge How-To] for details). -p:: --preserve-merges:: Instead of ignoring merges, try to recreate them. ++ +This uses the `--interactive` machinery internally, but combining it +with the `--interactive` option explicitly is generally not a good +idea unless you know what you are doing (see BUGS below). + --root:: Rebase all commits reachable from <branch>, instead of @@ -607,6 +616,28 @@ The ripple effect of a "hard case" recovery is especially bad: case" recovery too! +BUGS +---- +The todo list presented by `--preserve-merges --interactive` does not +represent the topology of the revision graph. Editing commits and +rewording their commit messages should work fine, but attempts to +reorder commits tend to produce counterintuitive results. + +For example, an attempt to rearrange +------------ +1 --- 2 --- 3 --- 4 --- 5 +------------ +to +------------ +1 --- 2 --- 4 --- 3 --- 5 +------------ +by moving the "pick 4" line will result in the following history: +------------ + 3 + / +1 --- 2 --- 4 --- 5 +------------ + Authors ------ Written by Junio C Hamano <gitster@pobox.com> and diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index ebaaadc178..aa021b0cb8 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -14,6 +14,7 @@ SYNOPSIS 'git remote rename' <old> <new> 'git remote rm' <name> 'git remote set-head' <name> (-a | -d | <branch>) +'git remote set-branches' <name> [--add] <branch>... 'git remote set-url' [--push] <name> <newurl> [<oldurl>] 'git remote set-url --add' [--push] <name> <newurl> 'git remote set-url --delete' [--push] <name> <url> @@ -110,6 +111,18 @@ remote set-head origin master" will set `$GIT_DIR/refs/remotes/origin/HEAD` to `refs/remotes/origin/master` already exists; if not it must be fetched first. + +'set-branches':: + +Changes the list of branches tracked by the named remote. +This can be used to track a subset of the available remote branches +after the initial setup for a remote. ++ +The named branches will be interpreted as if specified with the +`-t` option on the 'git remote add' command line. ++ +With `--add`, instead of replacing the list of currently tracked +branches, adds to that list. + 'set-url':: Changes URL remote points to. Sets first URL remote points to matching diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 12622fc49a..c283084272 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -101,6 +101,15 @@ See the CONFIGURATION section for 'sendemail.multiedit'. + The --to option must be repeated for each user you want on the to list. +--8bit-encoding=<encoding>:: + When encountering a non-ASCII message or subject that does not + declare its encoding, add headers/quoting to indicate it is + encoded in <encoding>. Default is the value of the + 'sendemail.assume8bitEncoding'; if that is unspecified, this + will be prompted for if any non-ASCII files are encountered. ++ +Note that no attempts whatsoever are made to validate the encoding. + Sending ~~~~~~~ diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 2d4bbfcaf4..2fd054c104 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -27,6 +27,10 @@ OPTIONS --short:: Give the output in the short-format. +-b:: +--branch:: + Show the branch and tracking info even in short-format. + --porcelain:: Give the output in a stable, easy-to-parse format for scripts. Currently this is identical to --short output, but is guaranteed @@ -49,6 +53,17 @@ See linkgit:git-config[1] for configuration variable used to change the default for when the option is not specified. +--ignore-submodules[=<when>]:: + Ignore changes to submodules when looking for changes. <when> can be + either "untracked", "dirty" or "all", which is the default. When + "untracked" is used submodules are not considered dirty when they only + contain untracked content (but they are still scanned for modified + content). Using "dirty" ignores all changes to the work tree of submodules, + only changes to the commits stored in the superproject are shown (this was + the behavior before 1.7.0). Using "all" hides all changes to submodules + (and suppresses the output of submodule summaries when the config option + `status.submodulesummary` is set). + -z:: Terminate entries with NUL, instead of LF. This implies the `--porcelain` output format if no other format is given. @@ -120,6 +135,10 @@ Ignored files are not listed. ? ? untracked ------------------------------------------------- +If -b is used the short-format status is preceded by a line + +## branchname tracking info + There is an alternate -z format recommended for machine parsing. In that format, the status field is the same, but some other things change. First, the '->' is omitted from rename entries and the field @@ -128,7 +147,7 @@ order is reversed (e.g 'from -> to' becomes 'to from'). Second, a NUL and the terminating newline (but a space still separates the status field from the first filename). Third, filenames containing special characters are not specially formatted; no quoting or -backslash-escaping is performed. +backslash-escaping is performed. Fourth, there is no branch line. CONFIGURATION ------------- diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 2502531a3d..cdabfd29ad 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -145,10 +145,12 @@ summary:: foreach:: Evaluates an arbitrary shell command in each checked out submodule. - The command has access to the variables $name, $path and $sha1: + The command has access to the variables $name, $path, $sha1 and + $toplevel: $name is the name of the relevant submodule section in .gitmodules, $path is the name of the submodule directory relative to the - superproject, and $sha1 is the commit as recorded in the superproject. + superproject, $sha1 is the commit as recorded in the superproject, + and $toplevel is the absolute path to the top-level of the superproject. Any submodules defined in the superproject but not checked out are ignored by this command. Unless given --quiet, foreach prints the name of each submodule before evaluating the command. diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index 68dc1879fe..765d4b312e 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -93,8 +93,6 @@ OPTIONS This option can be also used as a coarse file-level mechanism to ignore uncommitted changes in tracked files (akin to what `.gitignore` does for untracked files). -You should remember that an explicit 'git add' operation will -still cause the file to be refreshed from the working tree. Git will fail (gracefully) in case it needs to modify this file in the index e.g. when merging in a commit; thus, in case the assumed-untracked file is changed upstream, diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 0523a57698..564586b943 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -92,53 +92,154 @@ such as 'git checkout' and 'git merge' run. They also affect how git stores the contents you prepare in the working tree in the repository upon 'git add' and 'git commit'. -`crlf` +`text` ^^^^^^ -This attribute controls the line-ending convention. +This attribute enables and controls end-of-line normalization. When a +text file is normalized, its line endings are converted to LF in the +repository. To control what line ending style is used in the working +directory, use the `eol` attribute for a single file and the +`core.eol` configuration variable for all text files. Set:: - Setting the `crlf` attribute on a path is meant to mark - the path as a "text" file. 'core.autocrlf' conversion - takes place without guessing the content type by - inspection. + Setting the `text` attribute on a path enables end-of-line + normalization and marks the path as a text file. End-of-line + conversion takes place without guessing the content type. Unset:: - Unsetting the `crlf` attribute on a path tells git not to + Unsetting the `text` attribute on a path tells git not to attempt any end-of-line conversion upon checkin or checkout. +Set to string value "auto":: + + When `text` is set to "auto", the path is marked for automatic + end-of-line normalization. If git decides that the content is + text, its line endings are normalized to LF on checkin. + Unspecified:: - Unspecified `crlf` attribute tells git to apply the - `core.autocrlf` conversion when the file content looks - like text. + If the `text` attribute is unspecified, git uses the + `core.autocrlf` configuration variable to determine if the + file should be converted. -Set to string value "input":: +Any other value causes git to act as if `text` has been left +unspecified. - This is similar to setting the attribute to `true`, but - also forces git to act as if `core.autocrlf` is set to - `input` for the path. +`eol` +^^^^^ -Any other value set to `crlf` attribute is ignored and git acts -as if the attribute is left unspecified. +This attribute sets a specific line-ending style to be used in the +working directory. It enables end-of-line normalization without any +content checks, effectively setting the `text` attribute. +Set to string value "crlf":: -The `core.autocrlf` conversion -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + This setting forces git to normalize line endings for this + file on checkin and convert them to CRLF when the file is + checked out. + +Set to string value "lf":: + + This setting forces git to normalize line endings to LF on + checkin and prevents conversion to CRLF when the file is + checked out. + +Backwards compatibility with `crlf` attribute +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +For backwards compatibility, the `crlf` attribute is interpreted as +follows: + +------------------------ +crlf text +-crlf -text +crlf=input eol=lf +------------------------ + +End-of-line conversion +^^^^^^^^^^^^^^^^^^^^^^ + +While git normally leaves file contents alone, it can be configured to +normalize line endings to LF in the repository and, optionally, to +convert them to CRLF when files are checked out. + +Here is an example that will make git normalize .txt, .vcproj and .sh +files, ensure that .vcproj files have CRLF and .sh files have LF in +the working directory, and prevent .jpg files from being normalized +regardless of their content. + +------------------------ +*.txt text +*.vcproj eol=crlf +*.sh eol=lf +*.jpg -text +------------------------ + +Other source code management systems normalize all text files in their +repositories, and there are two ways to enable similar automatic +normalization in git. + +If you simply want to have CRLF line endings in your working directory +regardless of the repository you are working with, you can set the +config variable "core.autocrlf" without changing any attributes. + +------------------------ +[core] + autocrlf = true +------------------------ + +This does not force normalization of all text files, but does ensure +that text files that you introduce to the repository have their line +endings normalized to LF when they are added, and that files that are +already normalized in the repository stay normalized. + +If you want to interoperate with a source code management system that +enforces end-of-line normalization, or you simply want all text files +in your repository to be normalized, you should instead set the `text` +attribute to "auto" for _all_ files. -If the configuration variable `core.autocrlf` is false, no -conversion is done. +------------------------ +* text=auto +------------------------ + +This ensures that all files that git considers to be text will have +normalized (LF) line endings in the repository. The `core.eol` +configuration variable controls which line endings git will use for +normalized files in your working directory; the default is to use the +native line ending for your platform, or CRLF if `core.autocrlf` is +set. + +NOTE: When `text=auto` normalization is enabled in an existing +repository, any text files containing CRLFs should be normalized. If +they are not they will be normalized the next time someone tries to +change them, causing unfortunate misattribution. From a clean working +directory: + +------------------------------------------------- +$ echo "* text=auto" >>.gitattributes +$ rm .git/index # Remove the index to force git to +$ git reset # re-scan the working directory +$ git status # Show files that will be normalized +$ git add -u +$ git add .gitattributes +$ git commit -m "Introduce end-of-line normalization" +------------------------------------------------- + +If any files that should not be normalized show up in 'git status', +unset their `text` attribute before running 'git add -u'. + +------------------------ +manual.pdf -text +------------------------ -When `core.autocrlf` is true, it means that the platform wants -CRLF line endings for files in the working tree, and you want to -convert them back to the normal LF line endings when checking -in to the repository. +Conversely, text files that git does not detect can have normalization +enabled manually. -When `core.autocrlf` is set to "input", line endings are -converted to LF upon checkin, but there is no conversion done -upon checkout. +------------------------ +weirdchars.txt text +------------------------ If `core.safecrlf` is set to "true" or "warn", git verifies if the conversion is reversible for the current setting of @@ -223,11 +324,11 @@ Interaction between checkin/checkout attributes In the check-in codepath, the worktree file is first converted with `filter` driver (if specified and corresponding driver defined), then the result is processed with `ident` (if -specified), and then finally with `crlf` (again, if specified +specified), and then finally with `text` (again, if specified and applicable). In the check-out codepath, the blob content is first converted -with `crlf`, and then `ident` and fed to `filter`. +with `text`, and then `ident` and fed to `filter`. Generating diff text @@ -651,7 +752,7 @@ You do not want any end-of-line conversions applied to, nor textual diffs produced for, any binary file you track. You would need to specify e.g. ------------ -*.jpg -crlf -diff +*.jpg -text -diff ------------ but that may become cumbersome, when you have many attributes. Using @@ -664,7 +765,7 @@ the same time. The system knows a built-in attribute macro, `binary`: which is equivalent to the above. Note that the attribute macros can only be "Set" (see the above example that sets "binary" macro as if it were an -ordinary attribute --- setting it in turn unsets "crlf" and "diff"). +ordinary attribute --- setting it in turn unsets "text" and "diff"). DEFINING ATTRIBUTE MACROS @@ -675,7 +776,7 @@ at the toplevel (i.e. not in any subdirectory). The built-in attribute macro "binary" is equivalent to: ------------ -[attr]binary -diff -crlf +[attr]binary -diff -text ------------ diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 98c459dc82..e10fa88b8c 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -83,16 +83,20 @@ Patterns have the following format: - If the pattern does not contain a slash '/', git treats it as a shell glob pattern and checks for a match against the - pathname without leading directories. + pathname relative to the location of the `.gitignore` file + (relative to the toplevel of the work tree if not from a + `.gitignore` file). - Otherwise, git treats the pattern as a shell glob suitable for consumption by fnmatch(3) with the FNM_PATHNAME flag: wildcards in the pattern will not match a / in the pathname. For example, "Documentation/\*.html" matches - "Documentation/git.html" but not - "Documentation/ppc/ppc.html". A leading slash matches the - beginning of the pathname; for example, "/*.c" matches - "cat-file.c" but not "mozilla-sha1/sha1.c". + "Documentation/git.html" but not "Documentation/ppc/ppc.html" + or "tools/perf/Documentation/perf.html". + + - A leading slash matches the beginning of the pathname. + For example, "/*.c" matches "cat-file.c" but not + "mozilla-sha1/sha1.c". An example: diff --git a/Documentation/install-webdoc.sh b/Documentation/install-webdoc.sh index 2135a8ee1f..34d02a2418 100755 --- a/Documentation/install-webdoc.sh +++ b/Documentation/install-webdoc.sh @@ -12,7 +12,7 @@ do then : did not match elif test -f "$T/$h" && - diff -u -I'Last updated [0-9][0-9]-[A-Z][a-z][a-z]-' "$T/$h" "$h" + $DIFF -u -I'Last updated [0-9][0-9]-[A-Z][a-z][a-z]-' "$T/$h" "$h" then :; # up to date else diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index bd760d3bd1..561cc9f7d7 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -11,7 +11,12 @@ have limited your view of history: for example, if you are only interested in changes related to a certain directory or file. -Here are some additional details for each format: +There are several built-in formats, and you can define +additional formats by setting a pretty.<name> +config option to either another format name, or a +'format:' string, as described below (see +linkgit:git-config[1]). Here are the details of the +built-in formats: * 'oneline' @@ -76,9 +81,9 @@ displayed in full, regardless of whether --abbrev or true parent commits, without taking grafts nor history simplification into account. -* 'format:' +* 'format:<string>' + -The 'format:' format allows you to specify which information +The 'format:<string>' format allows you to specify which information you want to show. It works a little bit like printf format, with the notable exception that you get a newline with '%n' instead of '\n'. @@ -154,6 +159,10 @@ If you add a `-` (minus sign) after '%' of a placeholder, line-feeds that immediately precede the expansion are deleted if and only if the placeholder expands to an empty string. +If you add a ` ` (space) after '%' of a placeholder, a space +is inserted immediately before the expansion if and only if the +placeholder expands to a non-empty string. + * 'tformat:' + The 'tformat:' format works exactly like 'format:', except that it diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt index af6d2b995a..d78e121c76 100644 --- a/Documentation/pretty-options.txt +++ b/Documentation/pretty-options.txt @@ -3,8 +3,9 @@ Pretty-print the contents of the commit logs in a given format, where '<format>' can be one of 'oneline', 'short', 'medium', - 'full', 'fuller', 'email', 'raw' and 'format:<string>'. - When omitted, the format defaults to 'medium'. + 'full', 'fuller', 'email', 'raw' and 'format:<string>'. See + the "PRETTY FORMATS" section for some additional details for each + format. When omitted, the format defaults to 'medium'. + Note: you can specify the default pretty format in the repository configuration (see linkgit:git-config[1]). diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index b9fb7a86bd..cc562a057a 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -98,6 +98,15 @@ you would get an output like this: This implies the '--topo-order' option by default, but the '--date-order' option may also be specified. +ifdef::git-rev-list[] +--count:: + Print a number stating how many commits would have been + listed, and suppress all other output. When used together + with '--left-right', instead print the counts for left and + right commits, separated by a tab. +endif::git-rev-list[] + + ifndef::git-rev-list[] Diff Formatting ~~~~~~~~~~~~~~~ @@ -384,6 +393,14 @@ Default mode:: merges from the resulting history, as there are no selected commits contributing to this merge. +--ancestry-path:: + + When given a range of commits to display (e.g. 'commit1..commit2' + or 'commit2 {caret}commit1'), only display commits that exist + directly on the ancestry chain between the 'commit1' and + 'commit2', i.e. commits that are both descendants of 'commit1', + and ancestors of 'commit2'. + A more detailed explanation follows. Suppose you specified `foo` as the <paths>. We shall call commits @@ -440,7 +457,7 @@ This results in: + ----------------------------------------------------------------------- .-A---N---O - / / + / / / I---------D ----------------------------------------------------------------------- + @@ -511,8 +528,6 @@ Note that without '\--full-history', this still simplifies merges: if one of the parents is TREESAME, we follow only that one, so the other sides of the merge are never walked. -Finally, there is a fourth simplification mode available: - --simplify-merges:: First, build a history graph in the same way that @@ -554,6 +569,46 @@ Note the major differences in `N` and `P` over '\--full-history': removed completely, because it had one parent and is TREESAME. -- +Finally, there is a fifth simplification mode available: + +--ancestry-path:: + + Limit the displayed commits to those directly on the ancestry + chain between the "from" and "to" commits in the given commit + range. I.e. only display commits that are ancestor of the "to" + commit, and descendants of the "from" commit. ++ +As an example use case, consider the following commit history: ++ +----------------------------------------------------------------------- + D---E-------F + / \ \ + B---C---G---H---I---J + / \ + A-------K---------------L--M +----------------------------------------------------------------------- ++ +A regular 'D..M' computes the set of commits that are ancestors of `M`, +but excludes the ones that are ancestors of `D`. This is useful to see +what happened to the history leading to `M` since `D`, in the sense +that "what does `M` have that did not exist in `D`". The result in this +example would be all the commits, except `A` and `B` (and `D` itself, +of course). ++ +When we want to find out what commits in `M` are contaminated with the +bug introduced by `D` and need fixing, however, we might want to view +only the subset of 'D..M' that are actually descendants of `D`, i.e. +excluding `C` and `K`. This is exactly what the '\--ancestry-path' +option does. Applied to the 'D..M' range, it results in: ++ +----------------------------------------------------------------------- + E-------F + \ \ + G---H---I---J + \ + L--M +----------------------------------------------------------------------- + The '\--simplify-by-decoration' option allows you to view only the big picture of the topology of the history, by omitting commits that are not referenced by tags. Commits are marked as !TREESAME diff --git a/Documentation/technical/api-run-command.txt b/Documentation/technical/api-run-command.txt index 44876fa703..f18b4f4817 100644 --- a/Documentation/technical/api-run-command.txt +++ b/Documentation/technical/api-run-command.txt @@ -231,8 +231,9 @@ The function pointer in .proc has the following signature: There are serious restrictions on what the asynchronous function can do -because this facility is implemented by a pipe to a forked process on -UNIX, but by a thread in the same address space on Windows: +because this facility is implemented by a thread in the same address +space on most platforms (when pthreads is available), but by a pipe to +a forked process otherwise: . It cannot change the program's state (global variables, environment, etc.) in a way that the caller notices; in other words, .in and .out diff --git a/Documentation/technical/api-string-list.txt b/Documentation/technical/api-string-list.txt index 6d8c24bb1e..3f575bdcff 100644 --- a/Documentation/technical/api-string-list.txt +++ b/Documentation/technical/api-string-list.txt @@ -38,8 +38,8 @@ struct string_list list; int i; memset(&list, 0, sizeof(struct string_list)); -string_list_append("foo", &list); -string_list_append("bar", &list); +string_list_append(&list, "foo"); +string_list_append(&list, "bar"); for (i = 0; i < list.nr; i++) printf("%s\n", list.items[i].string) ---- @@ -8,6 +8,12 @@ all:: # Define SANE_TOOL_PATH to a colon-separated list of paths to prepend # to PATH if your tools in /usr/bin are broken. # +# Define SOCKLEN_T to a suitable type (such as 'size_t') if your +# system headers do not define a socklen_t type. +# +# Define INLINE to a suitable substitute (such as '__inline' or '') if git +# fails to compile with errors about undefined inline functions or similar. +# # Define SNPRINTF_RETURNS_BOGUS if your are on a system which snprintf() # or vsnprintf() return -1 instead of number of characters which would # have been written to the final string if enough space had been available. @@ -227,6 +233,8 @@ all:: # # Define CHECK_HEADER_DEPENDENCIES to check for problems in the hard-coded # dependency rules. +# +# Define NATIVE_CRLF if your platform uses CRLF for line endings. GIT-VERSION-FILE: FORCE @$(SHELL_PATH) ./GIT-VERSION-GEN @@ -249,7 +257,7 @@ endif CFLAGS = -g -O2 -Wall LDFLAGS = -ALL_CFLAGS = $(CFLAGS) +ALL_CFLAGS = $(CPPFLAGS) $(CFLAGS) ALL_LDFLAGS = $(LDFLAGS) STRIP ?= strip @@ -272,6 +280,7 @@ mandir = share/man infodir = share/info gitexecdir = libexec/git-core sharedir = $(prefix)/share +gitwebdir = $(sharedir)/gitweb template_dir = share/git-core/templates htmldir = share/doc/git-doc ifeq ($(prefix),/usr) @@ -285,11 +294,12 @@ lib = lib # DESTDIR= pathsep = : -export prefix bindir sharedir sysconfdir +export prefix bindir sharedir sysconfdir gitwebdir CC = gcc AR = ar RM = rm -f +DIFF = diff TAR = tar FIND = find INSTALL = install @@ -297,6 +307,7 @@ RPMBUILD = rpmbuild TCL_PATH = tclsh TCLTK_PATH = wish PTHREAD_LIBS = -lpthread +PTHREAD_CFLAGS = export TCL_PATH TCLTK_PATH @@ -627,6 +638,7 @@ LIB_OBJS += tree-diff.o LIB_OBJS += tree.o LIB_OBJS += tree-walk.o LIB_OBJS += unpack-trees.o +LIB_OBJS += url.o LIB_OBJS += usage.o LIB_OBJS += userdiff.o LIB_OBJS += utf8.o @@ -739,6 +751,13 @@ EXTLIBS = # because maintaining the nesting to match is a pain. If # we had "elif" things would have been much nicer... +ifeq ($(uname_S),OSF1) + # Need this for u_short definitions et al + BASIC_CFLAGS += -D_OSF_SOURCE + SOCKLEN_T = int + NO_STRTOULL = YesPlease + NO_NSEC = YesPlease +endif ifeq ($(uname_S),Linux) NO_STRLCPY = YesPlease NO_MKSTEMPS = YesPlease @@ -813,6 +832,18 @@ ifeq ($(uname_S),SunOS) NO_MKDTEMP = YesPlease NO_MKSTEMPS = YesPlease NO_REGEX = YesPlease + ifeq ($(uname_R),5.6) + SOCKLEN_T = int + NO_HSTRERROR = YesPlease + NO_IPV6 = YesPlease + NO_SOCKADDR_STORAGE = YesPlease + NO_UNSETENV = YesPlease + NO_SETENV = YesPlease + NO_STRLCPY = YesPlease + NO_C99_FORMAT = YesPlease + NO_STRTOUMAX = YesPlease + GIT_TEST_CMP = cmp + endif ifeq ($(uname_R),5.7) NEEDS_RESOLV = YesPlease NO_IPV6 = YesPlease @@ -822,18 +853,21 @@ ifeq ($(uname_S),SunOS) NO_STRLCPY = YesPlease NO_C99_FORMAT = YesPlease NO_STRTOUMAX = YesPlease + GIT_TEST_CMP = cmp endif ifeq ($(uname_R),5.8) NO_UNSETENV = YesPlease NO_SETENV = YesPlease NO_C99_FORMAT = YesPlease NO_STRTOUMAX = YesPlease + GIT_TEST_CMP = cmp endif ifeq ($(uname_R),5.9) NO_UNSETENV = YesPlease NO_SETENV = YesPlease NO_C99_FORMAT = YesPlease NO_STRTOUMAX = YesPlease + GIT_TEST_CMP = cmp endif INSTALL = /usr/ucb/install TAR = gtar @@ -898,6 +932,7 @@ ifeq ($(uname_S),NetBSD) HAVE_PATHS_H = YesPlease endif ifeq ($(uname_S),AIX) + DEFAULT_PAGER = more NO_STRCASESTR=YesPlease NO_MEMMEM = YesPlease NO_MKDTEMP = YesPlease @@ -910,7 +945,13 @@ ifeq ($(uname_S),AIX) BASIC_CFLAGS += -D_LARGE_FILES ifeq ($(shell expr "$(uname_V)" : '[1234]'),1) NO_PTHREADS = YesPlease + else + PTHREAD_LIBS = -lpthread + endif + ifeq ($(shell expr "$(uname_V).$(uname_R)" : '5\.1'),3) + INLINE='' endif + GIT_TEST_CMP = cmp endif ifeq ($(uname_S),GNU) # GNU/Hurd @@ -955,6 +996,7 @@ ifeq ($(uname_S),IRIX64) NEEDS_LIBGEN = YesPlease endif ifeq ($(uname_S),HP-UX) + INLINE = __inline NO_IPV6=YesPlease NO_SETENV=YesPlease NO_STRCASESTR=YesPlease @@ -966,6 +1008,20 @@ ifeq ($(uname_S),HP-UX) NO_HSTRERROR = YesPlease NO_SYS_SELECT_H = YesPlease SNPRINTF_RETURNS_BOGUS = YesPlease + NO_NSEC = YesPlease + ifeq ($(uname_R),B.11.00) + NO_INET_NTOP = YesPlease + NO_INET_PTON = YesPlease + endif + ifeq ($(uname_R),B.10.20) + # Override HP-UX 11.x setting: + INLINE = + SOCKLEN_T = size_t + NO_PREAD = YesPlease + NO_INET_NTOP = YesPlease + NO_INET_PTON = YesPlease + endif + GIT_TEST_CMP = cmp endif ifeq ($(uname_S),Windows) GIT_VERSION := $(GIT_VERSION).MSVC @@ -1002,6 +1058,7 @@ ifeq ($(uname_S),Windows) NO_CURL = YesPlease NO_PYTHON = YesPlease BLK_SHA1 = YesPlease + NATIVE_CRLF = YesPlease CC = compat/vcbuild/scripts/clink.pl AR = compat/vcbuild/scripts/lib.pl @@ -1039,7 +1096,6 @@ ifneq (,$(findstring MINGW,$(uname_S))) NO_STRTOUMAX = YesPlease NO_MKDTEMP = YesPlease NO_MKSTEMPS = YesPlease - SNPRINTF_RETURNS_BOGUS = YesPlease NO_SVN_TESTS = YesPlease NO_PERL_MAKEMAKER = YesPlease RUNTIME_PREFIX = YesPlease @@ -1076,6 +1132,7 @@ endif -include config.mak ifdef CHECK_HEADER_DEPENDENCIES +COMPUTE_HEADER_DEPENDENCIES = USE_COMPUTED_HEADER_DEPENDENCIES = endif @@ -1091,6 +1148,14 @@ else BROKEN_PATH_FIX = '/^\# @@BROKEN_PATH_FIX@@$$/d' endif +ifneq (,$(INLINE)) + BASIC_CFLAGS += -Dinline=$(INLINE) +endif + +ifneq (,$(SOCKLEN_T)) + BASIC_CFLAGS += -Dsocklen_t=$(SOCKLEN_T) +endif + ifeq ($(uname_S),Darwin) ifndef NO_FINK ifeq ($(shell test -d /sw/lib && echo y),y) @@ -1362,6 +1427,7 @@ endif ifdef NO_PTHREADS BASIC_CFLAGS += -DNO_PTHREADS else + BASIC_CFLAGS += $(PTHREAD_CFLAGS) EXTLIBS += $(PTHREAD_LIBS) LIB_OBJS += thread-utils.o endif @@ -1386,6 +1452,10 @@ ifdef USE_NED_ALLOCATOR COMPAT_OBJS += compat/nedmalloc/nedmalloc.o endif +ifdef GIT_TEST_CMP_USE_COPIED_CONTEXT + export GIT_TEST_CMP_USE_COPIED_CONTEXT +endif + ifeq ($(TCLTK_PATH),) NO_TCLTK=NoThanks endif @@ -1442,11 +1512,13 @@ gitexecdir_SQ = $(subst ','\'',$(gitexecdir)) template_dir_SQ = $(subst ','\'',$(template_dir)) htmldir_SQ = $(subst ','\'',$(htmldir)) prefix_SQ = $(subst ','\'',$(prefix)) +gitwebdir_SQ = $(subst ','\'',$(gitwebdir)) SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH)) PYTHON_PATH_SQ = $(subst ','\'',$(PYTHON_PATH)) TCLTK_PATH_SQ = $(subst ','\'',$(TCLTK_PATH)) +DIFF_SQ = $(subst ','\'',$(DIFF)) LIBS = $(GITLIBS) $(EXTLIBS) @@ -1473,7 +1545,7 @@ endif ALL_CFLAGS += $(BASIC_CFLAGS) ALL_LDFLAGS += $(BASIC_LDFLAGS) -export TAR INSTALL DESTDIR SHELL_PATH +export DIFF TAR INSTALL DESTDIR SHELL_PATH ### Build rules @@ -1535,6 +1607,7 @@ define cmd_munge_script $(RM) $@ $@+ && \ sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \ -e 's|@SHELL_PATH@|$(SHELL_PATH_SQ)|' \ + -e 's|@@DIFF@@|$(DIFF_SQ)|' \ -e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \ -e 's/@@NO_CURL@@/$(NO_CURL)/g' \ -e $(BROKEN_PATH_FIX) \ @@ -1562,11 +1635,10 @@ $(patsubst %.perl,%,$(SCRIPT_PERL)): % : %.perl sed -e '1{' \ -e ' s|#!.*perl|#!$(PERL_PATH_SQ)|' \ -e ' h' \ - -e ' s=.*=use lib (split(/$(pathsep)/, $$ENV{GITPERLLIB} || "@@INSTLIBDIR@@"));=' \ + -e ' s=.*=use lib (split(/$(pathsep)/, $$ENV{GITPERLLIB} || "'"$$INSTLIBDIR"'"));=' \ -e ' H' \ -e ' x' \ -e '}' \ - -e 's|@@INSTLIBDIR@@|'"$$INSTLIBDIR"'|g' \ -e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \ $@.perl >$@+ && \ chmod +x $@+ && \ @@ -1578,45 +1650,38 @@ gitweb: $(QUIET_SUBDIR0)gitweb $(QUIET_SUBDIR1) all ifdef JSMIN -GITWEB_PROGRAMS += gitweb/gitweb.min.js -GITWEB_JS = gitweb/gitweb.min.js +GITWEB_PROGRAMS += gitweb/static/gitweb.min.js +GITWEB_JS = gitweb/static/gitweb.min.js else -GITWEB_JS = gitweb/gitweb.js +GITWEB_JS = gitweb/static/gitweb.js endif ifdef CSSMIN -GITWEB_PROGRAMS += gitweb/gitweb.min.css -GITWEB_CSS = gitweb/gitweb.min.css +GITWEB_PROGRAMS += gitweb/static/gitweb.min.css +GITWEB_CSS = gitweb/static/gitweb.min.css else -GITWEB_CSS = gitweb/gitweb.css +GITWEB_CSS = gitweb/static/gitweb.css endif OTHER_PROGRAMS += gitweb/gitweb.cgi $(GITWEB_PROGRAMS) gitweb/gitweb.cgi: gitweb/gitweb.perl $(GITWEB_PROGRAMS) $(QUIET_SUBDIR0)gitweb $(QUIET_SUBDIR1) $(patsubst gitweb/%,%,$@) ifdef JSMIN -gitweb/gitweb.min.js: gitweb/gitweb.js +gitweb/static/gitweb.min.js: gitweb/static/gitweb.js $(QUIET_SUBDIR0)gitweb $(QUIET_SUBDIR1) $(patsubst gitweb/%,%,$@) endif # JSMIN ifdef CSSMIN -gitweb/gitweb.min.css: gitweb/gitweb.css +gitweb/static/gitweb.min.css: gitweb/static/gitweb.css $(QUIET_SUBDIR0)gitweb $(QUIET_SUBDIR1) $(patsubst gitweb/%,%,$@) endif # CSSMIN -git-instaweb: git-instaweb.sh gitweb/gitweb.cgi gitweb/gitweb.css gitweb/gitweb.js +git-instaweb: git-instaweb.sh gitweb/gitweb.cgi gitweb/static/gitweb.css gitweb/static/gitweb.js $(QUIET_GEN)$(RM) $@ $@+ && \ sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \ -e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \ -e 's/@@NO_CURL@@/$(NO_CURL)/g' \ - -e '/@@GITWEB_CGI@@/r gitweb/gitweb.cgi' \ - -e '/@@GITWEB_CGI@@/d' \ - -e '/@@GITWEB_CSS@@/r $(GITWEB_CSS)' \ - -e '/@@GITWEB_CSS@@/d' \ - -e '/@@GITWEB_JS@@/r $(GITWEB_JS)' \ - -e '/@@GITWEB_JS@@/d' \ + -e 's|@@GITWEBDIR@@|$(gitwebdir_SQ)|g' \ -e 's|@@PERL@@|$(PERL_PATH_SQ)|g' \ - -e 's|@@GITWEB_CSS_NAME@@|$(GITWEB_CSS)|' \ - -e 's|@@GITWEB_JS_NAME@@|$(GITWEB_JS)|' \ $@.sh > $@+ && \ chmod +x $@+ && \ mv $@+ $@ @@ -1668,7 +1733,10 @@ git.o git.spec \ TEST_OBJS := $(patsubst test-%$X,test-%.o,$(TEST_PROGRAMS)) GIT_OBJS := $(LIB_OBJS) $(BUILTIN_OBJS) $(PROGRAM_OBJS) $(TEST_OBJS) \ - git.o http.o http-walker.o remote-curl.o + git.o +ifndef NO_CURL + GIT_OBJS += http.o http-walker.o remote-curl.o +endif XDIFF_OBJS = xdiff/xdiffi.o xdiff/xprepare.o xdiff/xutils.o xdiff/xemit.o \ xdiff/xmerge.o xdiff/xpatience.o OBJECTS := $(GIT_OBJS) $(XDIFF_OBJS) @@ -1885,10 +1953,18 @@ GIT-CFLAGS: FORCE GIT-BUILD-OPTIONS: FORCE @echo SHELL_PATH=\''$(subst ','\'',$(SHELL_PATH_SQ))'\' >$@ @echo PERL_PATH=\''$(subst ','\'',$(PERL_PATH_SQ))'\' >>$@ + @echo DIFF=\''$(subst ','\'',$(subst ','\'',$(DIFF)))'\' >>$@ + @echo PYTHON_PATH=\''$(subst ','\'',$(PYTHON_PATH_SQ))'\' >>$@ @echo TAR=\''$(subst ','\'',$(subst ','\'',$(TAR)))'\' >>$@ @echo NO_CURL=\''$(subst ','\'',$(subst ','\'',$(NO_CURL)))'\' >>$@ @echo NO_PERL=\''$(subst ','\'',$(subst ','\'',$(NO_PERL)))'\' >>$@ @echo NO_PYTHON=\''$(subst ','\'',$(subst ','\'',$(NO_PYTHON)))'\' >>$@ +ifdef GIT_TEST_CMP + @echo GIT_TEST_CMP=\''$(subst ','\'',$(subst ','\'',$(GIT_TEST_CMP)))'\' >>$@ +endif +ifdef GIT_TEST_CMP_USE_COPIED_CONTEXT + @echo GIT_TEST_CMP_USE_COPIED_CONTEXT=YesPlease >>$@ +endif ### Detect Tck/Tk interpreter path changes ifndef NO_TCLTK @@ -1983,6 +2059,7 @@ install: all $(MAKE) -C templates DESTDIR='$(DESTDIR_SQ)' install ifndef NO_PERL $(MAKE) -C perl prefix='$(prefix_SQ)' DESTDIR='$(DESTDIR_SQ)' install + $(MAKE) -C gitweb install endif ifndef NO_PYTHON $(MAKE) -C git_remote_helpers prefix='$(prefix_SQ)' DESTDIR='$(DESTDIR_SQ)' install diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 0000000000..d399de2671 --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,40 @@ +dnl Check for socklen_t: historically on BSD it is an int, and in +dnl POSIX 1g it is a type of its own, but some platforms use different +dnl types for the argument to getsockopt, getpeername, etc. So we +dnl have to test to find something that will work. +AC_DEFUN([TYPE_SOCKLEN_T], +[ + AC_CHECK_TYPE([socklen_t], ,[ + AC_MSG_CHECKING([for socklen_t equivalent]) + AC_CACHE_VAL([git_cv_socklen_t_equiv], + [ + # Systems have either "struct sockaddr *" or + # "void *" as the second argument to getpeername + git_cv_socklen_t_equiv= + for arg2 in "struct sockaddr" void; do + for t in int size_t unsigned long "unsigned long"; do + AC_TRY_COMPILE([ + #include <sys/types.h> + #include <sys/socket.h> + + int getpeername (int, $arg2 *, $t *); + ],[ + $t len; + getpeername(0,0,&len); + ],[ + git_cv_socklen_t_equiv="$t" + break 2 + ]) + done + done + + if test "x$git_cv_socklen_t_equiv" = x; then + AC_MSG_ERROR([Cannot find a type to use in place of socklen_t]) + fi + ]) + AC_MSG_RESULT($git_cv_socklen_t_equiv) + AC_DEFINE_UNQUOTED(socklen_t, $git_cv_socklen_t_equiv, + [type to use in place of socklen_t if not defined])], + [#include <sys/types.h> +#include <sys/socket.h>]) +]) @@ -287,7 +287,7 @@ static void free_attr_elem(struct attr_stack *e) } static const char *builtin_attr[] = { - "[attr]binary -diff -crlf", + "[attr]binary -diff -text", NULL, }; @@ -34,7 +34,7 @@ int git_checkattr(const char *path, int, struct git_attr_check *); enum git_attr_direction { GIT_ATTR_CHECKIN, GIT_ATTR_CHECKOUT, - GIT_ATTR_INDEX, + GIT_ATTR_INDEX }; void git_attr_set_direction(enum git_attr_direction, struct index_state *); diff --git a/block-sha1/sha1.c b/block-sha1/sha1.c index d8934757a5..c0054a0b0a 100644 --- a/block-sha1/sha1.c +++ b/block-sha1/sha1.c @@ -70,6 +70,7 @@ */ #if defined(__i386__) || defined(__x86_64__) || \ + defined(_M_IX86) || defined(_M_X64) || \ defined(__ppc__) || defined(__ppc64__) || \ defined(__powerpc__) || defined(__powerpc64__) || \ defined(__s390__) || defined(__s390x__) @@ -236,13 +237,13 @@ void blk_SHA1_Init(blk_SHA_CTX *ctx) void blk_SHA1_Update(blk_SHA_CTX *ctx, const void *data, unsigned long len) { - int lenW = ctx->size & 63; + unsigned int lenW = ctx->size & 63; ctx->size += len; /* Read the data into W and process blocks as they get full */ if (lenW) { - int left = 64 - lenW; + unsigned int left = 64 - lenW; if (len < left) left = len; memcpy(lenW + (char *)ctx->W, data, left); @@ -269,8 +270,8 @@ void blk_SHA1_Final(unsigned char hashout[20], blk_SHA_CTX *ctx) int i; /* Pad with a binary 1 (ie 0x80), then zeroes, then length */ - padlen[0] = htonl(ctx->size >> 29); - padlen[1] = htonl(ctx->size << 3); + padlen[0] = htonl((uint32_t)(ctx->size >> 29)); + padlen[1] = htonl((uint32_t)(ctx->size << 3)); i = ctx->size & 63; blk_SHA1_Update(ctx, pad, 1+ (63 & (55 - i))); @@ -16,19 +16,20 @@ extern const char *help_unknown_cmd(const char *cmd); extern void prune_packed_objects(int); extern int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out); +extern int fmt_merge_msg_shortlog(struct strbuf *in, struct strbuf *out); extern int commit_notes(struct notes_tree *t, const char *msg); struct notes_rewrite_cfg { struct notes_tree **trees; const char *cmd; int enabled; - combine_notes_fn *combine; + combine_notes_fn combine; struct string_list *refs; int refs_from_env; int mode_from_env; }; -combine_notes_fn *parse_combine_notes_fn(const char *v); +combine_notes_fn parse_combine_notes_fn(const char *v); struct notes_rewrite_cfg *init_copy_notes_for_rewrite(const char *cmd); int copy_note_for_rewrite(struct notes_rewrite_cfg *c, const unsigned char *from_obj, const unsigned char *to_obj); @@ -36,6 +37,8 @@ void finish_copy_notes_for_rewrite(struct notes_rewrite_cfg *c); extern int check_pager_config(const char *cmd); +extern int textconv_object(const char *path, const unsigned char *sha1, char **buf, unsigned long *buf_size); + extern int cmd_add(int argc, const char **argv, const char *prefix); extern int cmd_annotate(int argc, const char **argv, const char *prefix); extern int cmd_apply(int argc, const char **argv, const char *prefix); diff --git a/builtin/add.c b/builtin/add.c index 87d2980313..17149cfeed 100644 --- a/builtin/add.c +++ b/builtin/add.c @@ -261,12 +261,14 @@ static int edit_patch(int argc, const char **argv, const char *prefix) { char *file = xstrdup(git_path("ADD_EDIT.patch")); const char *apply_argv[] = { "apply", "--recount", "--cached", - file, NULL }; + NULL, NULL }; struct child_process child; struct rev_info rev; int out; struct stat st; + apply_argv[3] = file; + git_config(git_diff_basic_config, NULL); /* no "diff" UI options */ if (read_cache() < 0) diff --git a/builtin/apply.c b/builtin/apply.c index 8fc5ec31de..12ef9ea8af 100644 --- a/builtin/apply.c +++ b/builtin/apply.c @@ -56,7 +56,7 @@ static enum ws_error_action { nowarn_ws_error, warn_on_ws_error, die_on_ws_error, - correct_ws_error, + correct_ws_error } ws_error_action = warn_on_ws_error; static int whitespace_error; static int squelch_whitespace_errors = 5; @@ -64,7 +64,7 @@ static int applied_after_fixing_ws; static enum ws_ignore { ignore_ws_none, - ignore_ws_change, + ignore_ws_change } ws_ignore_action = ignore_ws_none; @@ -2628,7 +2628,7 @@ static struct patch *in_fn_table(const char *name) if (name == NULL) return NULL; - item = string_list_lookup(name, &fn_table); + item = string_list_lookup(&fn_table, name); if (item != NULL) return (struct patch *)item->util; @@ -2664,7 +2664,7 @@ static void add_to_fn_table(struct patch *patch) * file creations and copies */ if (patch->new_name != NULL) { - item = string_list_insert(patch->new_name, &fn_table); + item = string_list_insert(&fn_table, patch->new_name); item->util = patch; } @@ -2673,7 +2673,7 @@ static void add_to_fn_table(struct patch *patch) * later chunks shouldn't patch old names */ if ((patch->new_name == NULL) || (patch->is_rename)) { - item = string_list_insert(patch->old_name, &fn_table); + item = string_list_insert(&fn_table, patch->old_name); item->util = PATH_WAS_DELETED; } } @@ -2686,7 +2686,7 @@ static void prepare_fn_table(struct patch *patch) while (patch) { if ((patch->new_name == NULL) || (patch->is_rename)) { struct string_list_item *item; - item = string_list_insert(patch->old_name, &fn_table); + item = string_list_insert(&fn_table, patch->old_name); item->util = PATH_TO_BE_DELETED; } patch = patch->next; @@ -3394,7 +3394,7 @@ static void add_name_limit(const char *name, int exclude) { struct string_list_item *it; - it = string_list_append(name, &limit_by_name); + it = string_list_append(&limit_by_name, name); it->util = exclude ? NULL : (void *) 1; } diff --git a/builtin/blame.c b/builtin/blame.c index fc1586350f..01e62fdeb0 100644 --- a/builtin/blame.c +++ b/builtin/blame.c @@ -20,6 +20,7 @@ #include "mailmap.h" #include "parse-options.h" #include "utf8.h" +#include "userdiff.h" static char blame_usage[] = "git blame [options] [rev-opts] [rev] [--] file"; @@ -39,7 +40,7 @@ static int show_root; static int reverse; static int blank_boundary; static int incremental; -static int xdl_opts = XDF_NEED_MINIMAL; +static int xdl_opts; static enum date_mode blame_date_mode = DATE_ISO8601; static size_t blame_date_width; @@ -86,16 +87,50 @@ struct origin { }; /* + * Prepare diff_filespec and convert it using diff textconv API + * if the textconv driver exists. + * Return 1 if the conversion succeeds, 0 otherwise. + */ +int textconv_object(const char *path, + const unsigned char *sha1, + char **buf, + unsigned long *buf_size) +{ + struct diff_filespec *df; + struct userdiff_driver *textconv; + + df = alloc_filespec(path); + fill_filespec(df, sha1, S_IFREG | 0664); + textconv = get_textconv(df); + if (!textconv) { + free_filespec(df); + return 0; + } + + *buf_size = fill_textconv(textconv, df, buf); + free_filespec(df); + return 1; +} + +/* * Given an origin, prepare mmfile_t structure to be used by the * diff machinery */ -static void fill_origin_blob(struct origin *o, mmfile_t *file) +static void fill_origin_blob(struct diff_options *opt, + struct origin *o, mmfile_t *file) { if (!o->file.ptr) { enum object_type type; + unsigned long file_size; + num_read_blob++; - file->ptr = read_sha1_file(o->blob_sha1, &type, - (unsigned long *)(&(file->size))); + if (DIFF_OPT_TST(opt, ALLOW_TEXTCONV) && + textconv_object(o->path, o->blob_sha1, &file->ptr, &file_size)) + ; + else + file->ptr = read_sha1_file(o->blob_sha1, &type, &file_size); + file->size = file_size; + if (!file->ptr) die("Cannot read blob %s for path %s", sha1_to_hex(o->blob_sha1), @@ -282,7 +317,6 @@ static struct origin *get_origin(struct scoreboard *sb, static int fill_blob_sha1(struct origin *origin) { unsigned mode; - if (!is_null_sha1(origin->blob_sha1)) return 0; if (get_tree_entry(origin->commit->object.sha1, @@ -733,16 +767,17 @@ static int pass_blame_to_parent(struct scoreboard *sb, { int last_in_target; mmfile_t file_p, file_o; - struct blame_chunk_cb_data d = { sb, target, parent, 0, 0 }; + struct blame_chunk_cb_data d; xpparam_t xpp; xdemitconf_t xecfg; - + memset(&d, 0, sizeof(d)); + d.sb = sb; d.target = target; d.parent = parent; last_in_target = find_last_in_target(sb, target); if (last_in_target < 0) return 1; /* nothing remains for this target */ - fill_origin_blob(parent, &file_p); - fill_origin_blob(target, &file_o); + fill_origin_blob(&sb->revs->diffopt, parent, &file_p); + fill_origin_blob(&sb->revs->diffopt, target, &file_o); num_get_patch++; memset(&xpp, 0, sizeof(xpp)); @@ -875,10 +910,11 @@ static void find_copy_in_blob(struct scoreboard *sb, const char *cp; int cnt; mmfile_t file_o; - struct handle_split_cb_data d = { sb, ent, parent, split, 0, 0 }; + struct handle_split_cb_data d; xpparam_t xpp; xdemitconf_t xecfg; - + memset(&d, 0, sizeof(d)); + d.sb = sb; d.ent = ent; d.parent = parent; d.split = split; /* * Prepare mmfile that contains only the lines in ent. */ @@ -922,7 +958,7 @@ static int find_move_in_parent(struct scoreboard *sb, if (last_in_target < 0) return 1; /* nothing remains for this target */ - fill_origin_blob(parent, &file_p); + fill_origin_blob(&sb->revs->diffopt, parent, &file_p); if (!file_p.ptr) return 0; @@ -1063,7 +1099,7 @@ static int find_copy_in_parent(struct scoreboard *sb, norigin = get_origin(sb, parent, p->one->path); hashcpy(norigin->blob_sha1, p->one->sha1); - fill_origin_blob(norigin, &file_p); + fill_origin_blob(&sb->revs->diffopt, norigin, &file_p); if (!file_p.ptr) continue; @@ -1589,7 +1625,7 @@ static void emit_porcelain(struct scoreboard *sb, struct blame_entry *ent) strcpy(hex, sha1_to_hex(suspect->commit->object.sha1)); printf("%s%c%d %d %d\n", hex, - ent->guilty ? ' ' : '*', // purely for debugging + ent->guilty ? ' ' : '*', /* purely for debugging */ ent->s_lno + 1, ent->lno + 1, ent->num_lines); @@ -1983,6 +2019,16 @@ static int git_blame_config(const char *var, const char *value, void *cb) blame_date_mode = parse_date_format(value); return 0; } + + switch (userdiff_config(var, value)) { + case 0: + break; + case -1: + return -1; + default: + return 0; + } + return git_default_config(var, value, cb); } @@ -1990,7 +2036,9 @@ static int git_blame_config(const char *var, const char *value, void *cb) * Prepare a dummy commit that represents the work tree (or staged) item. * Note that annotating work tree item never works in the reverse. */ -static struct commit *fake_working_tree_commit(const char *path, const char *contents_from) +static struct commit *fake_working_tree_commit(struct diff_options *opt, + const char *path, + const char *contents_from) { struct commit *commit; struct origin *origin; @@ -2018,6 +2066,7 @@ static struct commit *fake_working_tree_commit(const char *path, const char *con if (!contents_from || strcmp("-", contents_from)) { struct stat st; const char *read_from; + unsigned long buf_len; if (contents_from) { if (stat(contents_from, &st) < 0) @@ -2030,9 +2079,13 @@ static struct commit *fake_working_tree_commit(const char *path, const char *con read_from = path; } mode = canon_mode(st.st_mode); + switch (st.st_mode & S_IFMT) { case S_IFREG: - if (strbuf_read_file(&buf, read_from, st.st_size) != st.st_size) + if (DIFF_OPT_TST(opt, ALLOW_TEXTCONV) && + textconv_object(read_from, null_sha1, &buf.buf, &buf_len)) + buf.len = buf_len; + else if (strbuf_read_file(&buf, read_from, st.st_size) != st.st_size) die_errno("cannot open or read '%s'", read_from); break; case S_IFLNK: @@ -2248,6 +2301,7 @@ int cmd_blame(int argc, const char **argv, const char *prefix) git_config(git_blame_config, NULL); init_revisions(&revs, NULL); revs.date_mode = blame_date_mode; + DIFF_OPT_SET(&revs.diffopt, ALLOW_TEXTCONV); save_commit_buffer = 0; dashdash_pos = 0; @@ -2384,7 +2438,8 @@ parse_done: * or "--contents". */ setup_work_tree(); - sb.final = fake_working_tree_commit(path, contents_from); + sb.final = fake_working_tree_commit(&sb.revs->diffopt, + path, contents_from); add_pending_object(&revs, &(sb.final->object), ":"); } else if (contents_from) @@ -2411,8 +2466,14 @@ parse_done: if (fill_blob_sha1(o)) die("no such path %s in %s", path, final_commit_name); - sb.final_buf = read_sha1_file(o->blob_sha1, &type, - &sb.final_buf_size); + if (DIFF_OPT_TST(&sb.revs->diffopt, ALLOW_TEXTCONV) && + textconv_object(path, o->blob_sha1, (char **) &sb.final_buf, + &sb.final_buf_size)) + ; + else + sb.final_buf = read_sha1_file(o->blob_sha1, &type, + &sb.final_buf_size); + if (!sb.final_buf) die("Cannot read blob %s for path %s", sha1_to_hex(o->blob_sha1), diff --git a/builtin/branch.c b/builtin/branch.c index 6cf7e721e6..87976f0921 100644 --- a/builtin/branch.c +++ b/builtin/branch.c @@ -43,13 +43,13 @@ enum color_branch { BRANCH_COLOR_PLAIN = 1, BRANCH_COLOR_REMOTE = 2, BRANCH_COLOR_LOCAL = 3, - BRANCH_COLOR_CURRENT = 4, + BRANCH_COLOR_CURRENT = 4 }; static enum merge_filter { NO_FILTER = 0, SHOW_NOT_MERGED, - SHOW_MERGED, + SHOW_MERGED } merge_filter; static unsigned char merge_filter_ref[20]; @@ -257,9 +257,15 @@ static char *resolve_symref(const char *src, const char *prefix) return xstrdup(dst); } +struct append_ref_cb { + struct ref_list *ref_list; + int ret; +}; + static int append_ref(const char *refname, const unsigned char *sha1, int flags, void *cb_data) { - struct ref_list *ref_list = (struct ref_list*)(cb_data); + struct append_ref_cb *cb = (struct append_ref_cb *)(cb_data); + struct ref_list *ref_list = cb->ref_list; struct ref_item *newitem; struct commit *commit; int kind, i; @@ -293,8 +299,10 @@ static int append_ref(const char *refname, const unsigned char *sha1, int flags, commit = NULL; if (ref_list->verbose || ref_list->with_commit || merge_filter != NO_FILTER) { commit = lookup_commit_reference_gently(sha1, 1); - if (!commit) - return error("branch '%s' does not point at a commit", refname); + if (!commit) { + cb->ret = error("branch '%s' does not point at a commit", refname); + return 0; + } /* Filter with with_commit if specified */ if (!is_descendant_of(commit, ref_list->with_commit)) @@ -484,9 +492,10 @@ static void show_detached(struct ref_list *ref_list) } } -static void print_ref_list(int kinds, int detached, int verbose, int abbrev, struct commit_list *with_commit) +static int print_ref_list(int kinds, int detached, int verbose, int abbrev, struct commit_list *with_commit) { int i; + struct append_ref_cb cb; struct ref_list ref_list; memset(&ref_list, 0, sizeof(ref_list)); @@ -496,7 +505,9 @@ static void print_ref_list(int kinds, int detached, int verbose, int abbrev, str ref_list.with_commit = with_commit; if (merge_filter != NO_FILTER) init_revisions(&ref_list.revs, NULL); - for_each_rawref(append_ref, &ref_list); + cb.ref_list = &ref_list; + cb.ret = 0; + for_each_rawref(append_ref, &cb); if (merge_filter != NO_FILTER) { struct commit *filter; filter = lookup_commit_reference_gently(merge_filter_ref, 0); @@ -527,6 +538,11 @@ static void print_ref_list(int kinds, int detached, int verbose, int abbrev, str } free_ref_list(&ref_list); + + if (cb.ret) + error("some refs could not be read"); + + return cb.ret; } static void rename_branch(const char *oldname, const char *newname, int force) @@ -679,7 +695,7 @@ int cmd_branch(int argc, const char **argv, const char *prefix) if (delete) return delete_branches(argc, argv, delete > 1, kinds); else if (argc == 0) - print_ref_list(kinds, detached, verbose, abbrev, with_commit); + return print_ref_list(kinds, detached, verbose, abbrev, with_commit); else if (rename && (argc == 1)) rename_branch(head, argv[0], rename > 1); else if (rename && (argc == 2)) diff --git a/builtin/cat-file.c b/builtin/cat-file.c index a933eaa043..76ec3fec92 100644 --- a/builtin/cat-file.c +++ b/builtin/cat-file.c @@ -9,6 +9,8 @@ #include "tree.h" #include "builtin.h" #include "parse-options.h" +#include "diff.h" +#include "userdiff.h" #define BATCH 1 #define BATCH_CHECK 2 @@ -84,10 +86,11 @@ static int cat_one_file(int opt, const char *exp_type, const char *obj_name) { unsigned char sha1[20]; enum object_type type; - void *buf; + char *buf; unsigned long size; + struct object_context obj_context; - if (get_sha1(obj_name, sha1)) + if (get_sha1_with_context(obj_name, sha1, &obj_context)) die("Not a valid object name %s", obj_name); buf = NULL; @@ -118,7 +121,9 @@ static int cat_one_file(int opt, const char *exp_type, const char *obj_name) /* custom pretty-print here */ if (type == OBJ_TREE) { - const char *ls_args[3] = {"ls-tree", obj_name, NULL}; + const char *ls_args[3] = { NULL }; + ls_args[0] = "ls-tree"; + ls_args[1] = obj_name; return cmd_ls_tree(2, ls_args, NULL); } @@ -132,6 +137,17 @@ static int cat_one_file(int opt, const char *exp_type, const char *obj_name) /* otherwise just spit out the data */ break; + + case 'c': + if (!obj_context.path[0]) + die("git cat-file --textconv %s: <object> must be <sha1:path>", + obj_name); + + if (!textconv_object(obj_context.path, sha1, &buf, &size)) + die("git cat-file --textconv: unable to run textconv on %s", + obj_name); + break; + case 0: buf = read_object_with_reference(sha1, exp_type, &size, NULL); break; @@ -201,11 +217,25 @@ static int batch_objects(int print_contents) } static const char * const cat_file_usage[] = { - "git cat-file (-t|-s|-e|-p|<type>) <object>", + "git cat-file (-t|-s|-e|-p|<type>|--textconv) <object>", "git cat-file (--batch|--batch-check) < <list_of_objects>", NULL }; +static int git_cat_file_config(const char *var, const char *value, void *cb) +{ + switch (userdiff_config(var, value)) { + case 0: + break; + case -1: + return -1; + default: + return 0; + } + + return git_default_config(var, value, cb); +} + int cmd_cat_file(int argc, const char **argv, const char *prefix) { int opt = 0, batch = 0; @@ -218,6 +248,8 @@ int cmd_cat_file(int argc, const char **argv, const char *prefix) OPT_SET_INT('e', NULL, &opt, "exit with zero when there's no error", 'e'), OPT_SET_INT('p', NULL, &opt, "pretty-print object's content", 'p'), + OPT_SET_INT(0, "textconv", &opt, + "for blob objects, run textconv on object's content", 'c'), OPT_SET_INT(0, "batch", &batch, "show info and content of objects fed from the standard input", BATCH), @@ -227,7 +259,7 @@ int cmd_cat_file(int argc, const char **argv, const char *prefix) OPT_END() }; - git_config(git_default_config, NULL); + git_config(git_cat_file_config, NULL); if (argc != 3 && argc != 2) usage_with_options(cat_file_usage, options); diff --git a/builtin/checkout.c b/builtin/checkout.c index c3825219c1..1994be92c6 100644 --- a/builtin/checkout.c +++ b/builtin/checkout.c @@ -493,7 +493,24 @@ static void update_refs_for_switch(struct checkout_opts *opts, struct strbuf msg = STRBUF_INIT; const char *old_desc; if (opts->new_branch) { - if (!opts->new_orphan_branch) + if (opts->new_orphan_branch) { + if (opts->new_branch_log && !log_all_ref_updates) { + int temp; + char log_file[PATH_MAX]; + char *ref_name = mkpath("refs/heads/%s", opts->new_orphan_branch); + + temp = log_all_ref_updates; + log_all_ref_updates = 1; + if (log_ref_setup(ref_name, log_file, sizeof(log_file))) { + fprintf(stderr, "Can not do reflog for '%s'\n", + opts->new_orphan_branch); + log_all_ref_updates = temp; + return; + } + log_all_ref_updates = temp; + } + } + else create_branch(old->name, opts->new_branch, new->name, 0, opts->new_branch_log, opts->track); new->name = opts->new_branch; @@ -517,6 +534,14 @@ static void update_refs_for_switch(struct checkout_opts *opts, opts->new_branch ? " a new" : "", new->name); } + if (old->path && old->name) { + char log_file[PATH_MAX], ref_file[PATH_MAX]; + + git_snpath(log_file, sizeof(log_file), "logs/%s", old->path); + git_snpath(ref_file, sizeof(ref_file), "%s", old->path); + if (!file_exists(ref_file) && file_exists(log_file)) + remove_path(log_file); + } } else if (strcmp(new->name, "HEAD")) { update_ref(msg.buf, "HEAD", new->commit->object.sha1, NULL, REF_NODEREF, DIE_ON_ERR); @@ -611,7 +636,8 @@ static int check_tracking_name(const char *refname, const unsigned char *sha1, static const char *unique_tracking_name(const char *name) { - struct tracking_name_data cb_data = { name, NULL, 1 }; + struct tracking_name_data cb_data = { NULL, NULL, 1 }; + cb_data.name = name; for_each_ref(check_tracking_name, &cb_data); if (cb_data.unique) return cb_data.remote; @@ -684,8 +710,8 @@ int cmd_checkout(int argc, const char **argv, const char *prefix) if (opts.new_orphan_branch) { if (opts.new_branch) die("--orphan and -b are mutually exclusive"); - if (opts.track > 0 || opts.new_branch_log) - die("--orphan cannot be used with -t or -l"); + if (opts.track > 0) + die("--orphan cannot be used with -t"); opts.new_branch = opts.new_orphan_branch; } diff --git a/builtin/clone.c b/builtin/clone.c index 4457922427..efb1e6faa5 100644 --- a/builtin/clone.c +++ b/builtin/clone.c @@ -464,7 +464,8 @@ int cmd_clone(int argc, const char **argv, const char *prefix) set_git_dir(make_absolute_path(git_dir)); if (0 <= option_verbosity) - printf("Cloning into %s...\n", get_git_dir()); + printf("Cloning into %s%s...\n", + option_bare ? "bare repository " : "", dir); init_db(option_template, INIT_DB_QUIET); /* diff --git a/builtin/commit.c b/builtin/commit.c index ddf77e48e1..c101f006f6 100644 --- a/builtin/commit.c +++ b/builtin/commit.c @@ -48,6 +48,11 @@ static const char implicit_ident_advice[] = "\n" " git commit --amend --author='Your Name <you@example.com>'\n"; +static const char empty_amend_advice[] = +"You asked to amend the most recent commit, but doing so would make\n" +"it empty. You can repeat your command with --allow-empty, or you can\n" +"remove the commit entirely with \"git reset HEAD^\".\n"; + static unsigned char head_sha1[20]; static char *use_message_buffer; @@ -57,7 +62,7 @@ static struct lock_file false_lock; /* used only for partial commits */ static enum { COMMIT_AS_IS = 1, COMMIT_NORMAL, - COMMIT_PARTIAL, + COMMIT_PARTIAL } commit_style; static const char *logfile, *force_author; @@ -67,7 +72,7 @@ static char *author_name, *author_email, *author_date; static int all, edit_flag, also, interactive, only, amend, signoff; static int quiet, verbose, no_verify, allow_empty, dry_run, renew_authorship; static int no_post_rewrite, allow_empty_message; -static char *untracked_files_arg, *force_date; +static char *untracked_files_arg, *force_date, *ignore_submodule_arg; /* * The default commit message cleanup mode will remove the lines * beginning with # (shell comments) and leading and trailing @@ -78,7 +83,7 @@ static char *untracked_files_arg, *force_date; static enum { CLEANUP_SPACE, CLEANUP_NONE, - CLEANUP_ALL, + CLEANUP_ALL } cleanup_mode; static char *cleanup_arg; @@ -91,8 +96,9 @@ static int null_termination; static enum { STATUS_FORMAT_LONG, STATUS_FORMAT_SHORT, - STATUS_FORMAT_PORCELAIN, + STATUS_FORMAT_PORCELAIN } status_format = STATUS_FORMAT_LONG; +static int status_show_branch; static int opt_parse_m(const struct option *opt, const char *arg, int unset) { @@ -134,6 +140,7 @@ static struct option builtin_commit_options[] = { OPT_BOOLEAN(0, "dry-run", &dry_run, "show what would be committed"), OPT_SET_INT(0, "short", &status_format, "show status concisely", STATUS_FORMAT_SHORT), + OPT_BOOLEAN(0, "branch", &status_show_branch, "show branch information"), OPT_SET_INT(0, "porcelain", &status_format, "show porcelain output format", STATUS_FORMAT_PORCELAIN), OPT_BOOLEAN('z', "null", &null_termination, @@ -212,7 +219,7 @@ static int list_paths(struct string_list *list, const char *with_tree, continue; if (!match_pathspec(pattern, ce->name, ce_namelen(ce), 0, m)) continue; - item = string_list_insert(ce->name, list); + item = string_list_insert(list, ce->name); if (ce_skip_worktree(ce)) item->util = item; /* better a valid pointer than a fake one */ } @@ -424,7 +431,7 @@ static int run_status(FILE *fp, const char *index_file, const char *prefix, int switch (status_format) { case STATUS_FORMAT_SHORT: - wt_shortstatus_print(s, null_termination); + wt_shortstatus_print(s, null_termination, status_show_branch); break; case STATUS_FORMAT_PORCELAIN: wt_porcelain_print(s, null_termination); @@ -462,15 +469,21 @@ static void determine_author_info(void) if (!a) die("invalid commit: %s", use_message); - lb = strstr(a + 8, " <"); - rb = strstr(a + 8, "> "); - eol = strchr(a + 8, '\n'); - if (!lb || !rb || !eol) + lb = strchrnul(a + strlen("\nauthor "), '<'); + rb = strchrnul(lb, '>'); + eol = strchrnul(rb, '\n'); + if (!*lb || !*rb || !*eol) die("invalid commit: %s", use_message); - name = xstrndup(a + 8, lb - (a + 8)); - email = xstrndup(lb + 2, rb - (lb + 2)); - date = xstrndup(rb + 2, eol - (rb + 2)); + if (lb == a + strlen("\nauthor ")) + /* \nauthor <foo@example.com> */ + name = xcalloc(1, 1); + else + name = xmemdupz(a + strlen("\nauthor "), + (lb - strlen(" ") - + (a + strlen("\nauthor ")))); + email = xmemdupz(lb + strlen("<"), rb - (lb + strlen("<"))); + date = xmemdupz(rb + strlen("> "), eol - (rb + strlen("> "))); } if (force_author) { @@ -700,6 +713,8 @@ static int prepare_to_commit(const char *index_file, const char *prefix, if (!commitable && !in_merge && !allow_empty && !(amend && is_a_merge(head_sha1))) { run_status(stdout, index_file, prefix, 0, s); + if (amend) + fputs(empty_amend_advice, stderr); return 0; } @@ -724,7 +739,8 @@ static int prepare_to_commit(const char *index_file, const char *prefix, if (use_editor) { char index[PATH_MAX]; - const char *env[2] = { index, NULL }; + const char *env[2] = { NULL }; + env[0] = index; snprintf(index, sizeof(index), "GIT_INDEX_FILE=%s", index_file); if (launch_editor(git_path(commit_editmsg), NULL, env)) { fprintf(stderr, @@ -1030,6 +1046,8 @@ int cmd_status(int argc, const char **argv, const char *prefix) OPT__VERBOSE(&verbose), OPT_SET_INT('s', "short", &status_format, "show status concisely", STATUS_FORMAT_SHORT), + OPT_BOOLEAN('b', "branch", &status_show_branch, + "show branch information"), OPT_SET_INT(0, "porcelain", &status_format, "show porcelain output format", STATUS_FORMAT_PORCELAIN), @@ -1041,6 +1059,9 @@ int cmd_status(int argc, const char **argv, const char *prefix) PARSE_OPT_OPTARG, NULL, (intptr_t)"all" }, OPT_BOOLEAN(0, "ignored", &show_ignored_in_status, "show ignored files"), + { OPTION_STRING, 0, "ignore-submodules", &ignore_submodule_arg, "when", + "ignore changes to submodules, optional when: all, dirty, untracked. (Default: all)", + PARSE_OPT_OPTARG, NULL, (intptr_t)"all" }, OPT_END(), }; @@ -1071,6 +1092,7 @@ int cmd_status(int argc, const char **argv, const char *prefix) s.is_initial = get_sha1(s.reference, sha1) ? 1 : 0; s.in_merge = in_merge; + s.ignore_submodule_arg = ignore_submodule_arg; wt_status_collect(&s); if (s.relative_paths) @@ -1082,13 +1104,14 @@ int cmd_status(int argc, const char **argv, const char *prefix) switch (status_format) { case STATUS_FORMAT_SHORT: - wt_shortstatus_print(&s, null_termination); + wt_shortstatus_print(&s, null_termination, status_show_branch); break; case STATUS_FORMAT_PORCELAIN: wt_porcelain_print(&s, null_termination); break; case STATUS_FORMAT_LONG: s.verbose = verbose; + s.ignore_submodule_arg = ignore_submodule_arg; wt_status_print(&s); break; } @@ -1157,13 +1180,11 @@ static void print_summary(const char *prefix, const unsigned char *sha1) initial_commit ? " (root-commit)" : ""); if (!log_tree_commit(&rev, commit)) { - struct pretty_print_context ctx = {0}; - struct strbuf buf = STRBUF_INIT; - ctx.date_mode = DATE_NORMAL; - format_commit_message(commit, format.buf + 7, &buf, &ctx); - printf("%s\n", buf.buf); - strbuf_release(&buf); + rev.always_show_header = 1; + rev.use_terminator = 1; + log_tree_commit(&rev, commit); } + strbuf_release(&format); } @@ -1251,13 +1272,16 @@ int cmd_commit(int argc, const char **argv, const char *prefix) } /* Determine parents */ + reflog_msg = getenv("GIT_REFLOG_ACTION"); if (initial_commit) { - reflog_msg = "commit (initial)"; + if (!reflog_msg) + reflog_msg = "commit (initial)"; } else if (amend) { struct commit_list *c; struct commit *commit; - reflog_msg = "commit (amend)"; + if (!reflog_msg) + reflog_msg = "commit (amend)"; commit = lookup_commit(head_sha1); if (!commit || parse_commit(commit)) die("could not parse HEAD commit"); @@ -1268,7 +1292,8 @@ int cmd_commit(int argc, const char **argv, const char *prefix) struct strbuf m = STRBUF_INIT; FILE *fp; - reflog_msg = "commit (merge)"; + if (!reflog_msg) + reflog_msg = "commit (merge)"; pptr = &commit_list_insert(lookup_commit(head_sha1), pptr)->next; fp = fopen(git_path("MERGE_HEAD"), "r"); if (fp == NULL) @@ -1291,7 +1316,8 @@ int cmd_commit(int argc, const char **argv, const char *prefix) if (allow_fast_forward) parents = reduce_heads(parents); } else { - reflog_msg = "commit"; + if (!reflog_msg) + reflog_msg = "commit"; pptr = &commit_list_insert(lookup_commit(head_sha1), pptr)->next; } diff --git a/builtin/fast-export.c b/builtin/fast-export.c index c6dd71a7bc..9fe25ff0b3 100644 --- a/builtin/fast-export.c +++ b/builtin/fast-export.c @@ -438,7 +438,7 @@ static void get_tags_and_duplicates(struct object_array *pending, /* handle nested tags */ while (tag && tag->object.type == OBJ_TAG) { parse_object(tag->object.sha1); - string_list_append(full_name, extra_refs)->util = tag; + string_list_append(extra_refs, full_name)->util = tag; tag = (struct tag *)tag->tagged; } if (!tag) @@ -464,7 +464,7 @@ static void get_tags_and_duplicates(struct object_array *pending, } if (commit->util) /* more than one name for the same object */ - string_list_append(full_name, extra_refs)->util = commit; + string_list_append(extra_refs, full_name)->util = commit; else commit->util = full_name; } diff --git a/builtin/fetch.c b/builtin/fetch.c index 8470850415..6eb1dfea09 100644 --- a/builtin/fetch.c +++ b/builtin/fetch.c @@ -528,7 +528,7 @@ static int add_existing(const char *refname, const unsigned char *sha1, int flag, void *cbdata) { struct string_list *list = (struct string_list *)cbdata; - struct string_list_item *item = string_list_insert(refname, list); + struct string_list_item *item = string_list_insert(list, refname); item->util = (void *)sha1; return 0; } @@ -574,9 +574,10 @@ static void find_non_local_tags(struct transport *transport, { struct string_list existing_refs = { NULL, 0, 0, 0 }; struct string_list remote_refs = { NULL, 0, 0, 0 }; - struct tag_data data = {head, tail}; + struct tag_data data; const struct ref *ref; struct string_list_item *item = NULL; + data.head = head; data.tail = tail; for_each_ref(add_existing, &existing_refs); for (ref = transport_get_remote_refs(transport); ref; ref = ref->next) { @@ -616,7 +617,7 @@ static void find_non_local_tags(struct transport *transport, string_list_has_string(&existing_refs, ref->name)) continue; - item = string_list_insert(ref->name, &remote_refs); + item = string_list_insert(&remote_refs, ref->name); item->util = (void *)ref->old_sha1; } string_list_clear(&existing_refs, 0); @@ -633,7 +634,7 @@ static void find_non_local_tags(struct transport *transport, * For all the tags in the remote_refs string list, call * add_to_tail to add them to the list of refs to be fetched */ - for_each_string_list(add_to_tail, &remote_refs, &data); + for_each_string_list(&remote_refs, add_to_tail, &data); string_list_clear(&remote_refs, 0); } @@ -695,8 +696,8 @@ static int do_fetch(struct transport *transport, for (rm = ref_map; rm; rm = rm->next) { if (rm->peer_ref) { - peer_item = string_list_lookup(rm->peer_ref->name, - &existing_refs); + peer_item = string_list_lookup(&existing_refs, + rm->peer_ref->name); if (peer_item) hashcpy(rm->peer_ref->old_sha1, peer_item->util); @@ -745,7 +746,7 @@ static int get_one_remote_for_fetch(struct remote *remote, void *priv) { struct string_list *list = priv; if (!remote->skip_default_update) - string_list_append(remote->name, list); + string_list_append(list, remote->name); return 0; } @@ -764,8 +765,8 @@ static int get_remote_group(const char *key, const char *value, void *priv) int space = strcspn(value, " \t\n"); while (*value) { if (space > 1) { - string_list_append(xstrndup(value, space), - g->list); + string_list_append(g->list, + xstrndup(value, space)); } value += space + (value[space] != '\0'); space = strcspn(value, " \t\n"); @@ -778,7 +779,8 @@ static int get_remote_group(const char *key, const char *value, void *priv) static int add_remote_or_group(const char *name, struct string_list *list) { int prev_nr = list->nr; - struct remote_group_data g = { name, list }; + struct remote_group_data g; + g.name = name; g.list = list; git_config(get_remote_group, &g); if (list->nr == prev_nr) { @@ -786,7 +788,7 @@ static int add_remote_or_group(const char *name, struct string_list *list) if (!remote_is_configured(name)) return 0; remote = remote_get(name); - string_list_append(remote->name, list); + string_list_append(list, remote->name); } return 1; } diff --git a/builtin/fmt-merge-msg.c b/builtin/fmt-merge-msg.c index 379a03131f..bc3c5e6d3e 100644 --- a/builtin/fmt-merge-msg.c +++ b/builtin/fmt-merge-msg.c @@ -82,7 +82,7 @@ static int handle_line(char *line) item = unsorted_string_list_lookup(&srcs, src); if (!item) { - item = string_list_append(src, &srcs); + item = string_list_append(&srcs, src); item->util = xcalloc(1, sizeof(struct src_data)); init_src_data(item->util); } @@ -93,19 +93,19 @@ static int handle_line(char *line) src_data->head_status |= 1; } else if (!prefixcmp(line, "branch ")) { origin = line + 7; - string_list_append(origin, &src_data->branch); + string_list_append(&src_data->branch, origin); src_data->head_status |= 2; } else if (!prefixcmp(line, "tag ")) { origin = line; - string_list_append(origin + 4, &src_data->tag); + string_list_append(&src_data->tag, origin + 4); src_data->head_status |= 2; } else if (!prefixcmp(line, "remote branch ")) { origin = line + 14; - string_list_append(origin, &src_data->r_branch); + string_list_append(&src_data->r_branch, origin); src_data->head_status |= 2; } else { origin = src; - string_list_append(line, &src_data->generic); + string_list_append(&src_data->generic, line); src_data->head_status |= 2; } @@ -118,7 +118,7 @@ static int handle_line(char *line) sprintf(new_origin, "%s of %s", origin, src); origin = new_origin; } - string_list_append(origin, &origins)->util = sha1; + string_list_append(&origins, origin)->util = sha1; return 0; } @@ -176,10 +176,10 @@ static void shortlog(const char *name, unsigned char *sha1, strbuf_ltrim(&sb); if (!sb.len) - string_list_append(sha1_to_hex(commit->object.sha1), - &subjects); + string_list_append(&subjects, + sha1_to_hex(commit->object.sha1)); else - string_list_append(strbuf_detach(&sb, NULL), &subjects); + string_list_append(&subjects, strbuf_detach(&sb, NULL)); } if (count > limit) @@ -202,35 +202,10 @@ static void shortlog(const char *name, unsigned char *sha1, string_list_clear(&subjects, 0); } -int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out) { - int limit = 20, i = 0, pos = 0; +static void do_fmt_merge_msg_title(struct strbuf *out, + const char *current_branch) { + int i = 0; char *sep = ""; - unsigned char head_sha1[20]; - const char *current_branch; - - /* get current branch */ - current_branch = resolve_ref("HEAD", head_sha1, 1, NULL); - if (!current_branch) - die("No current branch"); - if (!prefixcmp(current_branch, "refs/heads/")) - current_branch += 11; - - /* get a line */ - while (pos < in->len) { - int len; - char *newline, *p = in->buf + pos; - - newline = strchr(p, '\n'); - len = newline ? newline - p : strlen(p); - pos += len + !!newline; - i++; - p[len] = 0; - if (handle_line(p)) - die ("Error in line %d: %.*s", i, len, p); - } - - if (!srcs.nr) - return 0; strbuf_addstr(out, "Merge "); for (i = 0; i < srcs.nr; i++) { @@ -278,6 +253,40 @@ int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out) { strbuf_addch(out, '\n'); else strbuf_addf(out, " into %s\n", current_branch); +} + +static int do_fmt_merge_msg(int merge_title, int merge_summary, + struct strbuf *in, struct strbuf *out) { + int limit = 20, i = 0, pos = 0; + unsigned char head_sha1[20]; + const char *current_branch; + + /* get current branch */ + current_branch = resolve_ref("HEAD", head_sha1, 1, NULL); + if (!current_branch) + die("No current branch"); + if (!prefixcmp(current_branch, "refs/heads/")) + current_branch += 11; + + /* get a line */ + while (pos < in->len) { + int len; + char *newline, *p = in->buf + pos; + + newline = strchr(p, '\n'); + len = newline ? newline - p : strlen(p); + pos += len + !!newline; + i++; + p[len] = 0; + if (handle_line(p)) + die ("Error in line %d: %.*s", i, len, p); + } + + if (!srcs.nr) + return 0; + + if (merge_title) + do_fmt_merge_msg_title(out, current_branch); if (merge_summary) { struct commit *head; @@ -289,6 +298,9 @@ int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out) { rev.ignore_merges = 1; rev.limited = 1; + if (suffixcmp(out->buf, "\n")) + strbuf_addch(out, '\n'); + for (i = 0; i < origins.nr; i++) shortlog(origins.items[i].string, origins.items[i].util, head, &rev, limit, out); @@ -296,6 +308,14 @@ int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out) { return 0; } +int fmt_merge_msg(int merge_summary, struct strbuf *in, struct strbuf *out) { + return do_fmt_merge_msg(1, merge_summary, in, out); +} + +int fmt_merge_msg_shortlog(struct strbuf *in, struct strbuf *out) { + return do_fmt_merge_msg(0, 1, in, out); +} + int cmd_fmt_merge_msg(int argc, const char **argv, const char *prefix) { const char *inpath = NULL; diff --git a/builtin/for-each-ref.c b/builtin/for-each-ref.c index 3a97953177..a2b28c6962 100644 --- a/builtin/for-each-ref.c +++ b/builtin/for-each-ref.c @@ -552,10 +552,10 @@ static void grab_values(struct atom_value *val, int deref, struct object *obj, v grab_person("committer", val, deref, obj, buf, sz); break; case OBJ_TREE: - // grab_tree_values(val, deref, obj, buf, sz); + /* grab_tree_values(val, deref, obj, buf, sz); */ break; case OBJ_BLOB: - // grab_blob_values(val, deref, obj, buf, sz); + /* grab_blob_values(val, deref, obj, buf, sz); */ break; default: die("Eh? Object of type %d?", obj->type); diff --git a/builtin/grep.c b/builtin/grep.c index b194ea3cea..232cd1ce07 100644 --- a/builtin/grep.c +++ b/builtin/grep.c @@ -11,6 +11,8 @@ #include "tree-walk.h" #include "builtin.h" #include "parse-options.h" +#include "string-list.h" +#include "run-command.h" #include "userdiff.h" #include "grep.h" #include "quote.h" @@ -556,6 +558,33 @@ static int grep_file(struct grep_opt *opt, const char *filename) } } +static void append_path(struct grep_opt *opt, const void *data, size_t len) +{ + struct string_list *path_list = opt->output_priv; + + if (len == 1 && *(const char *)data == '\0') + return; + string_list_append(path_list, xstrndup(data, len)); +} + +static void run_pager(struct grep_opt *opt, const char *prefix) +{ + struct string_list *path_list = opt->output_priv; + const char **argv = xmalloc(sizeof(const char *) * (path_list->nr + 1)); + int i, status; + + for (i = 0; i < path_list->nr; i++) + argv[i] = path_list->items[i].string; + argv[path_list->nr] = NULL; + + if (prefix && chdir(prefix)) + die("Failed to chdir: %s", prefix); + status = run_command_v_opt(argv, RUN_USING_SHELL); + if (status) + exit(status); + free(argv); +} + static int grep_cache(struct grep_opt *opt, const char **paths, int cached) { int hit = 0; @@ -590,7 +619,6 @@ static int grep_cache(struct grep_opt *opt, const char **paths, int cached) if (hit && opt->status_only) break; } - free_grep_patterns(opt); return hit; } @@ -675,6 +703,25 @@ static int grep_object(struct grep_opt *opt, const char **paths, die("unable to grep from object of type %s", typename(obj->type)); } +static int grep_objects(struct grep_opt *opt, const char **paths, + const struct object_array *list) +{ + unsigned int i; + int hit = 0; + const unsigned int nr = list->nr; + + for (i = 0; i < nr; i++) { + struct object *real_obj; + real_obj = deref_tag(list->objects[i].item, NULL, 0); + if (grep_object(opt, paths, real_obj, list->objects[i].name)) { + hit = 1; + if (opt->status_only) + break; + } + } + return hit; +} + static int grep_directory(struct grep_opt *opt, const char **paths) { struct dir_struct dir; @@ -689,7 +736,6 @@ static int grep_directory(struct grep_opt *opt, const char **paths) if (hit && opt->status_only) break; } - free_grep_patterns(opt); return hit; } @@ -724,11 +770,15 @@ static int file_callback(const struct option *opt, const char *arg, int unset) if (!patterns) die_errno("cannot open '%s'", arg); while (strbuf_getline(&sb, patterns, '\n') == 0) { + char *s; + size_t len; + /* ignore empty line like grep does */ if (sb.len == 0) continue; - append_grep_pattern(grep_opt, strbuf_detach(&sb, NULL), arg, - ++lno, GREP_PATTERN); + + s = strbuf_detach(&sb, &len); + append_grep_pat(grep_opt, s, len, arg, ++lno, GREP_PATTERN); } fclose(patterns); strbuf_release(&sb); @@ -782,9 +832,11 @@ int cmd_grep(int argc, const char **argv, const char *prefix) int cached = 0; int seen_dashdash = 0; int external_grep_allowed__ignored; + const char *show_in_pager = NULL, *default_pager = "dummy"; struct grep_opt opt; struct object_array list = { 0, 0, NULL }; const char **paths = NULL; + struct string_list path_list = { NULL, 0, 0, 0 }; int i; int dummy; int nongit = 0, use_index = 1; @@ -868,6 +920,9 @@ int cmd_grep(int argc, const char **argv, const char *prefix) OPT_BOOLEAN(0, "all-match", &opt.all_match, "show only matches from files that match all patterns"), OPT_GROUP(""), + { OPTION_STRING, 'O', "open-files-in-pager", &show_in_pager, + "pager", "show matching files in the pager", + PARSE_OPT_OPTARG, NULL, (intptr_t)default_pager }, OPT_BOOLEAN(0, "ext-grep", &external_grep_allowed__ignored, "allow calling of grep(1) (ignored by this build)"), { OPTION_CALLBACK, 0, "help-all", &options, NULL, "show usage", @@ -943,6 +998,17 @@ int cmd_grep(int argc, const char **argv, const char *prefix) argc--; } + if (show_in_pager == default_pager) + show_in_pager = git_pager(1); + if (show_in_pager) { + opt.name_only = 1; + opt.null_following_name = 1; + opt.output_priv = &path_list; + opt.output = append_path; + string_list_append(&path_list, show_in_pager); + use_threads = 0; + } + if (!opt.pattern_list) die("no pattern given."); if (!opt.fixed && opt.ignore_case) @@ -999,44 +1065,51 @@ int cmd_grep(int argc, const char **argv, const char *prefix) paths[1] = NULL; } + if (show_in_pager && (cached || list.nr)) + die("--open-files-in-pager only works on the worktree"); + + if (show_in_pager && opt.pattern_list && !opt.pattern_list->next) { + const char *pager = path_list.items[0].string; + int len = strlen(pager); + + if (len > 4 && is_dir_sep(pager[len - 5])) + pager += len - 4; + + if (!strcmp("less", pager) || !strcmp("vi", pager)) { + struct strbuf buf = STRBUF_INIT; + strbuf_addf(&buf, "+/%s%s", + strcmp("less", pager) ? "" : "*", + opt.pattern_list->pattern); + string_list_append(&path_list, buf.buf); + strbuf_detach(&buf, NULL); + } + } + + if (!show_in_pager) + setup_pager(); + + if (!use_index) { - int hit; if (cached) die("--cached cannot be used with --no-index."); if (list.nr) die("--no-index cannot be used with revs."); hit = grep_directory(&opt, paths); - if (use_threads) - hit |= wait_all(); - return !hit; - } - - if (!list.nr) { - int hit; + } else if (!list.nr) { if (!cached) setup_work_tree(); hit = grep_cache(&opt, paths, cached); - if (use_threads) - hit |= wait_all(); - return !hit; - } - - if (cached) - die("both --cached and trees are given."); - - for (i = 0; i < list.nr; i++) { - struct object *real_obj; - real_obj = deref_tag(list.objects[i].item, NULL, 0); - if (grep_object(&opt, paths, real_obj, list.objects[i].name)) { - hit = 1; - if (opt.status_only) - break; - } + } else { + if (cached) + die("both --cached and trees are given."); + hit = grep_objects(&opt, paths, &list); } if (use_threads) hit |= wait_all(); + if (hit && show_in_pager) + run_pager(&opt, prefix); free_grep_patterns(&opt); return !hit; } diff --git a/builtin/help.c b/builtin/help.c index 3182a2bec4..a9836b00ae 100644 --- a/builtin/help.c +++ b/builtin/help.c @@ -26,7 +26,7 @@ enum help_format { HELP_FORMAT_NONE, HELP_FORMAT_MAN, HELP_FORMAT_INFO, - HELP_FORMAT_WEB, + HELP_FORMAT_WEB }; static int show_all = 0; diff --git a/builtin/log.c b/builtin/log.c index 976e16f9f2..7cb9317af7 100644 --- a/builtin/log.c +++ b/builtin/log.c @@ -535,13 +535,13 @@ static void add_header(const char *value) len--; if (!strncasecmp(value, "to: ", 4)) { - item = string_list_append(value + 4, &extra_to); + item = string_list_append(&extra_to, value + 4); len -= 4; } else if (!strncasecmp(value, "cc: ", 4)) { - item = string_list_append(value + 4, &extra_cc); + item = string_list_append(&extra_cc, value + 4); len -= 4; } else { - item = string_list_append(value, &extra_hdr); + item = string_list_append(&extra_hdr, value); } item->string[len] = '\0'; @@ -549,8 +549,9 @@ static void add_header(const char *value) #define THREAD_SHALLOW 1 #define THREAD_DEEP 2 -static int thread = 0; -static int do_signoff = 0; +static int thread; +static int do_signoff; +static const char *signature = git_version_string; static int git_format_config(const char *var, const char *value, void *cb) { @@ -565,13 +566,13 @@ static int git_format_config(const char *var, const char *value, void *cb) if (!strcmp(var, "format.to")) { if (!value) return config_error_nonbool(var); - string_list_append(value, &extra_to); + string_list_append(&extra_to, value); return 0; } if (!strcmp(var, "format.cc")) { if (!value) return config_error_nonbool(var); - string_list_append(value, &extra_cc); + string_list_append(&extra_cc, value); return 0; } if (!strcmp(var, "diff.color") || !strcmp(var, "color.diff")) { @@ -609,6 +610,8 @@ static int git_format_config(const char *var, const char *value, void *cb) do_signoff = git_config_bool(var, value); return 0; } + if (!strcmp(var, "format.signature")) + return git_config_string(&signature, var, value); return git_log_config(var, value, cb); } @@ -703,6 +706,12 @@ static void gen_message_id(struct rev_info *info, char *base) info->message_id = strbuf_detach(&buf, NULL); } +static void print_signature(void) +{ + if (signature && *signature) + printf("-- \n%s\n\n", signature); +} + static void make_cover_letter(struct rev_info *rev, int use_stdout, int numbered, int numbered_files, struct commit *origin, @@ -796,6 +805,7 @@ static void make_cover_letter(struct rev_info *rev, int use_stdout, diff_flush(&opts); printf("\n"); + print_signature(); } static const char *clean_message_id(const char *msg_id) @@ -949,7 +959,7 @@ static int to_callback(const struct option *opt, const char *arg, int unset) if (unset) string_list_clear(&extra_to, 0); else - string_list_append(arg, &extra_to); + string_list_append(&extra_to, arg); return 0; } @@ -958,7 +968,7 @@ static int cc_callback(const struct option *opt, const char *arg, int unset) if (unset) string_list_clear(&extra_cc, 0); else - string_list_append(arg, &extra_cc); + string_list_append(&extra_cc, arg); return 0; } @@ -1035,6 +1045,8 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix) { OPTION_CALLBACK, 0, "thread", &thread, "style", "enable message threading, styles: shallow, deep", PARSE_OPT_OPTARG, thread_callback }, + OPT_STRING(0, "signature", &signature, "signature", + "add a signature"), OPT_END() }; @@ -1239,7 +1251,7 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix) rev.ref_message_ids = xcalloc(1, sizeof(struct string_list)); if (in_reply_to) { const char *msgid = clean_message_id(in_reply_to); - string_list_append(msgid, rev.ref_message_ids); + string_list_append(rev.ref_message_ids, msgid); } rev.numbered_files = numbered_files; rev.patch_suffix = fmt_patch_suffix; @@ -1286,8 +1298,8 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix) && (!cover_letter || rev.nr > 1)) free(rev.message_id); else - string_list_append(rev.message_id, - rev.ref_message_ids); + string_list_append(rev.ref_message_ids, + rev.message_id); } gen_message_id(&rev, sha1_to_hex(commit->object.sha1)); } @@ -1313,7 +1325,7 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix) mime_boundary_leader, rev.mime_boundary); else - printf("-- \n%s\n\n", git_version_string); + print_signature(); } if (!use_stdout) fclose(stdout); diff --git a/builtin/ls-files.c b/builtin/ls-files.c index c0fbcdcf4f..1b9b8a8b4a 100644 --- a/builtin/ls-files.c +++ b/builtin/ls-files.c @@ -26,8 +26,9 @@ static int show_killed; static int show_valid_bit; static int line_terminator = '\n'; +static const char *prefix; +static int max_prefix_len; static int prefix_len; -static int prefix_offset; static const char **pathspec; static int error_unmatch; static char *ps_matched; @@ -43,10 +44,15 @@ static const char *tag_modified = ""; static const char *tag_skip_worktree = ""; static const char *tag_resolve_undo = ""; +static void write_name(const char* name, size_t len) +{ + write_name_quoted_relative(name, len, prefix, prefix_len, stdout, + line_terminator); +} + static void show_dir_entry(const char *tag, struct dir_entry *ent) { - int len = prefix_len; - int offset = prefix_offset; + int len = max_prefix_len; if (len >= ent->len) die("git ls-files: internal error - directory entry not superset of prefix"); @@ -55,7 +61,7 @@ static void show_dir_entry(const char *tag, struct dir_entry *ent) return; fputs(tag, stdout); - write_name_quoted(ent->name + offset, stdout, line_terminator); + write_name(ent->name, ent->len); } static void show_other_files(struct dir_struct *dir) @@ -121,8 +127,7 @@ static void show_killed_files(struct dir_struct *dir) static void show_ce_entry(const char *tag, struct cache_entry *ce) { - int len = prefix_len; - int offset = prefix_offset; + int len = max_prefix_len; if (len >= ce_namelen(ce)) die("git ls-files: internal error - cache entry not superset of prefix"); @@ -156,20 +161,19 @@ static void show_ce_entry(const char *tag, struct cache_entry *ce) find_unique_abbrev(ce->sha1,abbrev), ce_stage(ce)); } - write_name_quoted(ce->name + offset, stdout, line_terminator); + write_name(ce->name, ce_namelen(ce)); } static int show_one_ru(struct string_list_item *item, void *cbdata) { - int offset = prefix_offset; const char *path = item->string; struct resolve_undo_info *ui = item->util; int i, len; len = strlen(path); - if (len < prefix_len) + if (len < max_prefix_len) return 0; /* outside of the prefix */ - if (!match_pathspec(pathspec, path, len, prefix_len, ps_matched)) + if (!match_pathspec(pathspec, path, len, max_prefix_len, ps_matched)) return 0; /* uninterested */ for (i = 0; i < 3; i++) { if (!ui->mode[i]) @@ -177,19 +181,19 @@ static int show_one_ru(struct string_list_item *item, void *cbdata) printf("%s%06o %s %d\t", tag_resolve_undo, ui->mode[i], find_unique_abbrev(ui->sha1[i], abbrev), i + 1); - write_name_quoted(path + offset, stdout, line_terminator); + write_name(path, len); } return 0; } -static void show_ru_info(const char *prefix) +static void show_ru_info(void) { if (!the_index.resolve_undo) return; - for_each_string_list(show_one_ru, the_index.resolve_undo, NULL); + for_each_string_list(the_index.resolve_undo, show_one_ru, NULL); } -static void show_files(struct dir_struct *dir, const char *prefix) +static void show_files(struct dir_struct *dir) { int i; @@ -243,7 +247,7 @@ static void show_files(struct dir_struct *dir, const char *prefix) */ static void prune_cache(const char *prefix) { - int pos = cache_name_pos(prefix, prefix_len); + int pos = cache_name_pos(prefix, max_prefix_len); unsigned int first, last; if (pos < 0) @@ -256,7 +260,7 @@ static void prune_cache(const char *prefix) while (last > first) { int next = (last + first) >> 1; struct cache_entry *ce = active_cache[next]; - if (!strncmp(ce->name, prefix, prefix_len)) { + if (!strncmp(ce->name, prefix, max_prefix_len)) { first = next+1; continue; } @@ -265,11 +269,16 @@ static void prune_cache(const char *prefix) active_nr = last; } -static const char *verify_pathspec(const char *prefix) +static const char *pathspec_prefix(const char *prefix) { const char **p, *n, *prev; unsigned long max; + if (!pathspec) { + max_prefix_len = prefix ? strlen(prefix) : 0; + return prefix; + } + prev = NULL; max = PATH_MAX; for (p = pathspec; (n = *p) != NULL; p++) { @@ -291,10 +300,7 @@ static const char *verify_pathspec(const char *prefix) } } - if (prefix_offset > max || memcmp(prev, prefix, prefix_offset)) - die("git ls-files: cannot generate relative filenames containing '..'"); - - prefix_len = max; + max_prefix_len = max; return max ? xmemdupz(prev, max) : NULL; } @@ -374,7 +380,7 @@ void overlay_tree_on_cache(const char *tree_name, const char *prefix) } } -int report_path_error(const char *ps_matched, const char **pathspec, int prefix_offset) +int report_path_error(const char *ps_matched, const char **pathspec, int prefix_len) { /* * Make sure all pathspec matched; otherwise it is an error. @@ -404,7 +410,7 @@ int report_path_error(const char *ps_matched, const char **pathspec, int prefix_ continue; error("pathspec '%s' did not match any file(s) known to git.", - pathspec[num] + prefix_offset); + pathspec[num] + prefix_len); errors++; } return errors; @@ -456,9 +462,10 @@ static int option_parse_exclude_standard(const struct option *opt, return 0; } -int cmd_ls_files(int argc, const char **argv, const char *prefix) +int cmd_ls_files(int argc, const char **argv, const char *cmd_prefix) { int require_work_tree = 0, show_tag = 0; + const char *max_prefix; struct dir_struct dir; struct option builtin_ls_files_options[] = { { OPTION_CALLBACK, 'z', NULL, NULL, NULL, @@ -504,7 +511,7 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix) { OPTION_CALLBACK, 0, "exclude-standard", &dir, NULL, "add the standard git exclusions", PARSE_OPT_NOARG, option_parse_exclude_standard }, - { OPTION_SET_INT, 0, "full-name", &prefix_offset, NULL, + { OPTION_SET_INT, 0, "full-name", &prefix_len, NULL, "make the output relative to the project top directory", PARSE_OPT_NOARG | PARSE_OPT_NONEG, NULL }, OPT_BOOLEAN(0, "error-unmatch", &error_unmatch, @@ -516,8 +523,9 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix) }; memset(&dir, 0, sizeof(dir)); + prefix = cmd_prefix; if (prefix) - prefix_offset = strlen(prefix); + prefix_len = strlen(prefix); git_config(git_default_config, NULL); if (read_cache() < 0) @@ -555,9 +563,8 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix) if (pathspec) strip_trailing_slash_from_submodules(); - /* Verify that the pathspec matches the prefix */ - if (pathspec) - prefix = verify_pathspec(prefix); + /* Find common prefix for all pathspec's */ + max_prefix = pathspec_prefix(prefix); /* Treat unmatching pathspec elements as errors */ if (pathspec && error_unmatch) { @@ -575,8 +582,8 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix) show_killed | show_modified | show_resolve_undo)) show_cached = 1; - if (prefix) - prune_cache(prefix); + if (max_prefix) + prune_cache(max_prefix); if (with_tree) { /* * Basic sanity check; show-stages and show-unmerged @@ -584,15 +591,15 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix) */ if (show_stage || show_unmerged) die("ls-files --with-tree is incompatible with -s or -u"); - overlay_tree_on_cache(with_tree, prefix); + overlay_tree_on_cache(with_tree, max_prefix); } - show_files(&dir, prefix); + show_files(&dir); if (show_resolve_undo) - show_ru_info(prefix); + show_ru_info(); if (ps_matched) { int bad; - bad = report_path_error(ps_matched, pathspec, prefix_offset); + bad = report_path_error(ps_matched, pathspec, prefix_len); if (bad) fprintf(stderr, "Did you forget to 'git add'?\n"); diff --git a/builtin/ls-remote.c b/builtin/ls-remote.c index 8ee91eb547..34480cfad6 100644 --- a/builtin/ls-remote.c +++ b/builtin/ls-remote.c @@ -5,7 +5,7 @@ static const char ls_remote_usage[] = "git ls-remote [--heads] [--tags] [-u <exec> | --upload-pack <exec>]\n" -" [<repository> [<refs>...]]"; +" [-q|--quiet] [<repository> [<refs>...]]"; /* * Is there one among the list of patterns that match the tail part @@ -34,6 +34,7 @@ int cmd_ls_remote(int argc, const char **argv, const char *prefix) const char *dest = NULL; int nongit; unsigned flags = 0; + int quiet = 0; const char *uploadpack = NULL; const char **pattern = NULL; @@ -67,6 +68,10 @@ int cmd_ls_remote(int argc, const char **argv, const char *prefix) flags |= REF_NORMAL; continue; } + if (!strcmp("--quiet", arg) || !strcmp("-q", arg)) { + quiet = 1; + continue; + } usage(ls_remote_usage); } dest = arg; @@ -99,6 +104,9 @@ int cmd_ls_remote(int argc, const char **argv, const char *prefix) ref = transport_get_remote_refs(transport); if (transport_disconnect(transport)) return 1; + + if (!dest && !quiet) + fprintf(stderr, "From %s\n", *remote->url); for ( ; ref; ref = ref->next) { if (!check_ref_type(ref, flags)) continue; diff --git a/builtin/mailinfo.c b/builtin/mailinfo.c index 4a9729b9b3..2320d981ce 100644 --- a/builtin/mailinfo.c +++ b/builtin/mailinfo.c @@ -17,10 +17,10 @@ static struct strbuf name = STRBUF_INIT; static struct strbuf email = STRBUF_INIT; static enum { - TE_DONTCARE, TE_QP, TE_BASE64, + TE_DONTCARE, TE_QP, TE_BASE64 } transfer_encoding; static enum { - TYPE_TEXT, TYPE_OTHER, + TYPE_TEXT, TYPE_OTHER } message_type; static struct strbuf charset = STRBUF_INIT; diff --git a/builtin/mailsplit.c b/builtin/mailsplit.c index cdfc1b7042..e4560da191 100644 --- a/builtin/mailsplit.c +++ b/builtin/mailsplit.c @@ -121,7 +121,7 @@ static int populate_maildir_list(struct string_list *list, const char *path) if (dent->d_name[0] == '.') continue; snprintf(name, sizeof(name), "%s/%s", *sub, dent->d_name); - string_list_insert(name, list); + string_list_insert(list, name); } closedir(dir); diff --git a/builtin/merge-file.c b/builtin/merge-file.c index 610849a653..b8e9e5ba01 100644 --- a/builtin/merge-file.c +++ b/builtin/merge-file.c @@ -25,7 +25,7 @@ int cmd_merge_file(int argc, const char **argv, const char *prefix) const char *names[3] = { NULL, NULL, NULL }; mmfile_t mmfs[3]; mmbuffer_t result = {NULL, 0}; - xmparam_t xmp = {{XDF_NEED_MINIMAL}}; + xmparam_t xmp = {{0}}; int ret = 0, i = 0, to_stdout = 0; int quiet = 0; int nongit; diff --git a/builtin/merge-tree.c b/builtin/merge-tree.c index a4a4f2ce4c..fc00d794d6 100644 --- a/builtin/merge-tree.c +++ b/builtin/merge-tree.c @@ -106,7 +106,7 @@ static void show_diff(struct merge_list *entry) xdemitconf_t xecfg; xdemitcb_t ecb; - xpp.flags = XDF_NEED_MINIMAL; + xpp.flags = 0; memset(&xecfg, 0, sizeof(xecfg)); xecfg.ctxlen = 3; ecb.outf = show_outf; diff --git a/builtin/merge.c b/builtin/merge.c index 37d414b3ba..37ce4f589f 100644 --- a/builtin/merge.c +++ b/builtin/merge.c @@ -982,7 +982,7 @@ int cmd_merge(int argc, const char **argv, const char *prefix) reset_hard(remote_head->sha1, 0); return 0; } else { - struct strbuf msg = STRBUF_INIT; + struct strbuf merge_names = STRBUF_INIT; /* We are invoked directly as the first-class UI. */ head_arg = "HEAD"; @@ -995,13 +995,17 @@ int cmd_merge(int argc, const char **argv, const char *prefix) * codepath so we discard the error in this * loop. */ - if (!have_message) { - for (i = 0; i < argc; i++) - merge_name(argv[i], &msg); - fmt_merge_msg(option_log, &msg, &merge_msg); - if (merge_msg.len) - strbuf_setlen(&merge_msg, merge_msg.len-1); - } + for (i = 0; i < argc; i++) + merge_name(argv[i], &merge_names); + + if (have_message && option_log) + fmt_merge_msg_shortlog(&merge_names, &merge_msg); + else if (!have_message) + fmt_merge_msg(option_log, &merge_names, &merge_msg); + + + if (!(have_message && !option_log) && merge_msg.len) + strbuf_setlen(&merge_msg, merge_msg.len-1); } if (head_invalid || !argc) diff --git a/builtin/mv.c b/builtin/mv.c index c07f53b343..38574b89f7 100644 --- a/builtin/mv.c +++ b/builtin/mv.c @@ -180,7 +180,7 @@ int cmd_mv(int argc, const char **argv, const char *prefix) } else if (string_list_has_string(&src_for_dst, dst)) bad = "multiple sources for the same target"; else - string_list_insert(dst, &src_for_dst); + string_list_insert(&src_for_dst, dst); if (bad) { if (ignore_errors) { diff --git a/builtin/notes.c b/builtin/notes.c index 52b72fca68..190005f3cd 100644 --- a/builtin/notes.c +++ b/builtin/notes.c @@ -26,7 +26,7 @@ static const char * const git_notes_usage[] = { "git notes [--ref <notes_ref>] edit [<object>]", "git notes [--ref <notes_ref>] show [<object>]", "git notes [--ref <notes_ref>] remove [<object>]", - "git notes [--ref <notes_ref>] prune", + "git notes [--ref <notes_ref>] prune [-n | -v]", NULL }; @@ -67,7 +67,7 @@ static const char * const git_notes_remove_usage[] = { }; static const char * const git_notes_prune_usage[] = { - "git notes prune", + "git notes prune [<options>]", NULL }; @@ -313,7 +313,7 @@ int commit_notes(struct notes_tree *t, const char *msg) return 0; } -combine_notes_fn *parse_combine_notes_fn(const char *v) +combine_notes_fn parse_combine_notes_fn(const char *v) { if (!strcasecmp(v, "overwrite")) return combine_notes_overwrite; @@ -416,7 +416,7 @@ int notes_copy_from_stdin(int force, const char *rewrite_cmd) { struct strbuf buf = STRBUF_INIT; struct notes_rewrite_cfg *c = NULL; - struct notes_tree *t; + struct notes_tree *t = NULL; int ret = 0; if (rewrite_cmd) { @@ -614,6 +614,10 @@ static int copy(int argc, const char **argv, const char *prefix) } } + if (argc < 2) { + error("too few parameters"); + usage_with_options(git_notes_copy_usage, options); + } if (2 < argc) { error("too many parameters"); usage_with_options(git_notes_copy_usage, options); @@ -792,7 +796,10 @@ static int remove_cmd(int argc, const char **argv, const char *prefix) static int prune(int argc, const char **argv, const char *prefix) { struct notes_tree *t; + int show_only = 0, verbose = 0; struct option options[] = { + OPT_BOOLEAN('n', NULL, &show_only, "do not remove, show only"), + OPT_BOOLEAN('v', NULL, &verbose, "report pruned notes"), OPT_END() }; @@ -806,8 +813,10 @@ static int prune(int argc, const char **argv, const char *prefix) t = init_notes_check("prune"); - prune_notes(t); - commit_notes(t, "Notes removed by 'git notes prune'"); + prune_notes(t, (verbose ? NOTES_PRUNE_VERBOSE : 0) | + (show_only ? NOTES_PRUNE_VERBOSE|NOTES_PRUNE_DRYRUN : 0) ); + if (!show_only) + commit_notes(t, "Notes removed by 'git notes prune'"); free_notes(t); return 0; } diff --git a/builtin/pack-objects.c b/builtin/pack-objects.c index 214d7ef2b1..0e81673118 100644 --- a/builtin/pack-objects.c +++ b/builtin/pack-objects.c @@ -1529,6 +1529,8 @@ static void try_to_free_from_threads(size_t size) read_unlock(); } +try_to_free_t old_try_to_free_routine; + /* * The main thread waits on the condition that (at least) one of the workers * has stopped working (which is indicated in the .working member of @@ -1563,12 +1565,12 @@ static void init_threaded_search(void) pthread_mutex_init(&cache_mutex, NULL); pthread_mutex_init(&progress_mutex, NULL); pthread_cond_init(&progress_cond, NULL); - set_try_to_free_routine(try_to_free_from_threads); + old_try_to_free_routine = set_try_to_free_routine(try_to_free_from_threads); } static void cleanup_threaded_search(void) { - set_try_to_free_routine(NULL); + set_try_to_free_routine(old_try_to_free_routine); pthread_cond_destroy(&progress_cond); pthread_mutex_destroy(&read_mutex); pthread_mutex_destroy(&cache_mutex); diff --git a/builtin/receive-pack.c b/builtin/receive-pack.c index bb34757d27..d634b5a3d5 100644 --- a/builtin/receive-pack.c +++ b/builtin/receive-pack.c @@ -17,7 +17,7 @@ enum deny_action { DENY_UNCONFIGURED, DENY_IGNORE, DENY_WARN, - DENY_REFUSE, + DENY_REFUSE }; static int deny_deletes; @@ -501,7 +501,7 @@ static void check_aliased_update(struct command *cmd, struct string_list *list) if (!(flag & REF_ISSYMREF)) return; - if ((item = string_list_lookup(dst_name, list)) == NULL) + if ((item = string_list_lookup(list, dst_name)) == NULL) return; cmd->skip_update = 1; @@ -515,9 +515,9 @@ static void check_aliased_update(struct command *cmd, struct string_list *list) dst_cmd->skip_update = 1; strcpy(cmd_oldh, find_unique_abbrev(cmd->old_sha1, DEFAULT_ABBREV)); - strcat(cmd_newh, find_unique_abbrev(cmd->new_sha1, DEFAULT_ABBREV)); + strcpy(cmd_newh, find_unique_abbrev(cmd->new_sha1, DEFAULT_ABBREV)); strcpy(dst_oldh, find_unique_abbrev(dst_cmd->old_sha1, DEFAULT_ABBREV)); - strcat(dst_newh, find_unique_abbrev(dst_cmd->new_sha1, DEFAULT_ABBREV)); + strcpy(dst_newh, find_unique_abbrev(dst_cmd->new_sha1, DEFAULT_ABBREV)); rp_error("refusing inconsistent update between symref '%s' (%s..%s) and" " its target '%s' (%s..%s)", cmd->ref_name, cmd_oldh, cmd_newh, @@ -534,7 +534,7 @@ static void check_aliased_updates(struct command *commands) for (cmd = commands; cmd; cmd = cmd->next) { struct string_list_item *item = - string_list_append(cmd->ref_name, &ref_list); + string_list_append(&ref_list, cmd->ref_name); item->util = (void *)cmd; } sort_string_list(&ref_list); diff --git a/builtin/remote.c b/builtin/remote.c index 0e99a9957d..6699bc5712 100644 --- a/builtin/remote.c +++ b/builtin/remote.c @@ -16,6 +16,7 @@ static const char * const builtin_remote_usage[] = { "git remote [-v | --verbose] show [-n] <name>", "git remote prune [-n | --dry-run] <name>", "git remote [-v | --verbose] update [-p | --prune] [group | remote]", + "git remote set-branches <name> [--add] <branch>...", "git remote set-url <name> <newurl> [<oldurl>]", "git remote set-url --add <name> <newurl>", "git remote set-url --delete <name> <url>", @@ -42,6 +43,12 @@ static const char * const builtin_remote_sethead_usage[] = { NULL }; +static const char * const builtin_remote_setbranches_usage[] = { + "git remote set-branches <name> <branch>...", + "git remote set-branches --add <name> <branch>...", + NULL +}; + static const char * const builtin_remote_show_usage[] = { "git remote show [<options>] <name>", NULL @@ -87,7 +94,7 @@ static int opt_parse_track(const struct option *opt, const char *arg, int not) if (not) string_list_clear(list, 0); else - string_list_append(arg, list); + string_list_append(list, arg); return 0; } @@ -110,6 +117,20 @@ enum { TAGS_SET = 2 }; +static int add_branch(const char *key, const char *branchname, + const char *remotename, int mirror, struct strbuf *tmp) +{ + strbuf_reset(tmp); + strbuf_addch(tmp, '+'); + if (mirror) + strbuf_addf(tmp, "refs/%s:refs/%s", + branchname, branchname); + else + strbuf_addf(tmp, "refs/heads/%s:refs/remotes/%s/%s", + branchname, remotename, branchname); + return git_config_set_multivar(key, tmp->buf, "^$", 0); +} + static int add(int argc, const char **argv) { int fetch = 0, mirror = 0, fetch_tags = TAGS_DEFAULT; @@ -160,19 +181,10 @@ static int add(int argc, const char **argv) strbuf_addf(&buf, "remote.%s.fetch", name); if (track.nr == 0) - string_list_append("*", &track); + string_list_append(&track, "*"); for (i = 0; i < track.nr; i++) { - struct string_list_item *item = track.items + i; - - strbuf_reset(&buf2); - strbuf_addch(&buf2, '+'); - if (mirror) - strbuf_addf(&buf2, "refs/%s:refs/%s", - item->string, item->string); - else - strbuf_addf(&buf2, "refs/heads/%s:refs/remotes/%s/%s", - item->string, name, item->string); - if (git_config_set_multivar(buf.buf, buf2.buf, "^$", 0)) + if (add_branch(buf.buf, track.items[i].string, + name, mirror, &buf2)) return 1; } @@ -251,7 +263,7 @@ static int config_read_branches(const char *key, const char *value, void *cb) } else return 0; - item = string_list_insert(name, &branch_list); + item = string_list_insert(&branch_list, name); if (!item->util) item->util = xcalloc(sizeof(struct branch_info), 1); @@ -266,11 +278,11 @@ static int config_read_branches(const char *key, const char *value, void *cb) while (space) { char *merge; merge = xstrndup(value, space - value); - string_list_append(merge, &info->merge); + string_list_append(&info->merge, merge); value = abbrev_branch(space + 1); space = strchr(value, ' '); } - string_list_append(xstrdup(value), &info->merge); + string_list_append(&info->merge, xstrdup(value)); } else info->rebase = git_config_bool(orig_key, value); } @@ -307,14 +319,14 @@ static int get_ref_states(const struct ref *remote_refs, struct ref_states *stat for (ref = fetch_map; ref; ref = ref->next) { unsigned char sha1[20]; if (!ref->peer_ref || read_ref(ref->peer_ref->name, sha1)) - string_list_append(abbrev_branch(ref->name), &states->new); + string_list_append(&states->new, abbrev_branch(ref->name)); else - string_list_append(abbrev_branch(ref->name), &states->tracked); + string_list_append(&states->tracked, abbrev_branch(ref->name)); } stale_refs = get_stale_heads(states->remote, fetch_map); for (ref = stale_refs; ref; ref = ref->next) { struct string_list_item *item = - string_list_append(abbrev_branch(ref->name), &states->stale); + string_list_append(&states->stale, abbrev_branch(ref->name)); item->util = xstrdup(ref->name); } free_refs(stale_refs); @@ -336,7 +348,7 @@ struct push_info { PUSH_STATUS_UPTODATE, PUSH_STATUS_FASTFORWARD, PUSH_STATUS_OUTOFDATE, - PUSH_STATUS_NOTQUERIED, + PUSH_STATUS_NOTQUERIED } status; }; @@ -363,8 +375,8 @@ static int get_push_ref_states(const struct ref *remote_refs, continue; hashcpy(ref->new_sha1, ref->peer_ref->new_sha1); - item = string_list_append(abbrev_branch(ref->peer_ref->name), - &states->push); + item = string_list_append(&states->push, + abbrev_branch(ref->peer_ref->name)); item->util = xcalloc(sizeof(struct push_info), 1); info = item->util; info->forced = ref->force; @@ -399,7 +411,7 @@ static int get_push_ref_states_noquery(struct ref_states *states) states->push.strdup_strings = 1; if (!remote->push_refspec_nr) { - item = string_list_append("(matching)", &states->push); + item = string_list_append(&states->push, "(matching)"); info = item->util = xcalloc(sizeof(struct push_info), 1); info->status = PUSH_STATUS_NOTQUERIED; info->dest = xstrdup(item->string); @@ -407,11 +419,11 @@ static int get_push_ref_states_noquery(struct ref_states *states) for (i = 0; i < remote->push_refspec_nr; i++) { struct refspec *spec = remote->push + i; if (spec->matching) - item = string_list_append("(matching)", &states->push); + item = string_list_append(&states->push, "(matching)"); else if (strlen(spec->src)) - item = string_list_append(spec->src, &states->push); + item = string_list_append(&states->push, spec->src); else - item = string_list_append("(delete)", &states->push); + item = string_list_append(&states->push, "(delete)"); info = item->util = xcalloc(sizeof(struct push_info), 1); info->forced = spec->force; @@ -435,7 +447,7 @@ static int get_head_names(const struct ref *remote_refs, struct ref_states *stat matches = guess_remote_head(find_ref_by_name(remote_refs, "HEAD"), fetch_map, 1); for (ref = matches; ref; ref = ref->next) - string_list_append(abbrev_branch(ref->name), &states->heads); + string_list_append(&states->heads, abbrev_branch(ref->name)); free_refs(fetch_map); free_refs(matches); @@ -499,8 +511,8 @@ static int add_branch_for_removal(const char *refname, if (prefixcmp(refname, "refs/remotes")) { /* advise user how to delete local branches */ if (!prefixcmp(refname, "refs/heads/")) - string_list_append(abbrev_branch(refname), - branches->skipped); + string_list_append(branches->skipped, + abbrev_branch(refname)); /* silently skip over other non-remote refs */ return 0; } @@ -509,7 +521,7 @@ static int add_branch_for_removal(const char *refname, if (flags & REF_ISSYMREF) return unlink(git_path("%s", refname)); - item = string_list_append(refname, branches->branches); + item = string_list_append(branches->branches, refname); item->util = xmalloc(20); hashcpy(item->util, sha1); @@ -534,7 +546,7 @@ static int read_remote_branches(const char *refname, strbuf_addf(&buf, "refs/remotes/%s", rename->old); if (!prefixcmp(refname, buf.buf)) { - item = string_list_append(xstrdup(refname), rename->remote_branches); + item = string_list_append(rename->remote_branches, xstrdup(refname)); symref = resolve_ref(refname, orig_sha1, 1, &flag); if (flag & REF_ISSYMREF) item->util = xstrdup(symref); @@ -724,11 +736,14 @@ static int rm(int argc, const char **argv) struct known_remotes known_remotes = { NULL, NULL }; struct string_list branches = { NULL, 0, 0, 1 }; struct string_list skipped = { NULL, 0, 0, 1 }; - struct branches_for_remote cb_data = { - NULL, &branches, &skipped, &known_remotes - }; + struct branches_for_remote cb_data; int i, result; + memset(&cb_data, 0, sizeof(cb_data)); + cb_data.branches = &branches; + cb_data.skipped = &skipped; + cb_data.keep = &known_remotes; + if (argc != 2) usage_with_options(builtin_remote_rm_usage, options); @@ -817,7 +832,7 @@ static int append_ref_to_tracked_list(const char *refname, memset(&refspec, 0, sizeof(refspec)); refspec.dst = (char *)refname; if (!remote_find_tracking(states->remote, &refspec)) - string_list_append(abbrev_branch(refspec.src), &states->tracked); + string_list_append(&states->tracked, abbrev_branch(refspec.src)); return 0; } @@ -870,7 +885,7 @@ static int add_remote_to_show_info(struct string_list_item *item, void *cb_data) int n = strlen(item->string); if (n > info->width) info->width = n; - string_list_insert(item->string, info->list); + string_list_insert(info->list, item->string); return 0; } @@ -917,7 +932,7 @@ static int add_local_to_show_info(struct string_list_item *branch_item, void *cb if (branch_info->rebase) show_info->any_rebase = 1; - item = string_list_insert(branch_item->string, show_info->list); + item = string_list_insert(show_info->list, branch_item->string); item->util = branch_info; return 0; @@ -965,7 +980,7 @@ static int add_push_to_show_info(struct string_list_item *push_item, void *cb_da show_info->width = n; if ((n = strlen(push_info->dest)) > show_info->width2) show_info->width2 = n; - item = string_list_append(push_item->string, show_info->list); + item = string_list_append(show_info->list, push_item->string); item->util = push_item->util; return 0; } @@ -1081,24 +1096,24 @@ static int show(int argc, const char **argv) /* remote branch info */ info.width = 0; - for_each_string_list(add_remote_to_show_info, &states.new, &info); - for_each_string_list(add_remote_to_show_info, &states.tracked, &info); - for_each_string_list(add_remote_to_show_info, &states.stale, &info); + for_each_string_list(&states.new, add_remote_to_show_info, &info); + for_each_string_list(&states.tracked, add_remote_to_show_info, &info); + for_each_string_list(&states.stale, add_remote_to_show_info, &info); if (info.list->nr) printf(" Remote branch%s:%s\n", info.list->nr > 1 ? "es" : "", no_query ? " (status not queried)" : ""); - for_each_string_list(show_remote_info_item, info.list, &info); + for_each_string_list(info.list, show_remote_info_item, &info); string_list_clear(info.list, 0); /* git pull info */ info.width = 0; info.any_rebase = 0; - for_each_string_list(add_local_to_show_info, &branch_list, &info); + for_each_string_list(&branch_list, add_local_to_show_info, &info); if (info.list->nr) printf(" Local branch%s configured for 'git pull':\n", info.list->nr > 1 ? "es" : ""); - for_each_string_list(show_local_info_item, info.list, &info); + for_each_string_list(info.list, show_local_info_item, &info); string_list_clear(info.list, 0); /* git push info */ @@ -1106,14 +1121,14 @@ static int show(int argc, const char **argv) printf(" Local refs will be mirrored by 'git push'\n"); info.width = info.width2 = 0; - for_each_string_list(add_push_to_show_info, &states.push, &info); + for_each_string_list(&states.push, add_push_to_show_info, &info); qsort(info.list->items, info.list->nr, sizeof(*info.list->items), cmp_string_with_push); if (info.list->nr) printf(" Local ref%s configured for 'git push'%s:\n", info.list->nr > 1 ? "s" : "", no_query ? " (status not queried)" : ""); - for_each_string_list(show_push_info_item, info.list, &info); + for_each_string_list(info.list, show_push_info_item, &info); string_list_clear(info.list, 0); free_remote_ref_states(&states); @@ -1284,6 +1299,72 @@ static int update(int argc, const char **argv) return run_command_v_opt(fetch_argv, RUN_GIT_CMD); } +static int remove_all_fetch_refspecs(const char *remote, const char *key) +{ + return git_config_set_multivar(key, NULL, NULL, 1); +} + +static int add_branches(struct remote *remote, const char **branches, + const char *key) +{ + const char *remotename = remote->name; + int mirror = remote->mirror; + struct strbuf refspec = STRBUF_INIT; + + for (; *branches; branches++) + if (add_branch(key, *branches, remotename, mirror, &refspec)) { + strbuf_release(&refspec); + return 1; + } + + strbuf_release(&refspec); + return 0; +} + +static int set_remote_branches(const char *remotename, const char **branches, + int add_mode) +{ + struct strbuf key = STRBUF_INIT; + struct remote *remote; + + strbuf_addf(&key, "remote.%s.fetch", remotename); + + if (!remote_is_configured(remotename)) + die("No such remote '%s'", remotename); + remote = remote_get(remotename); + + if (!add_mode && remove_all_fetch_refspecs(remotename, key.buf)) { + strbuf_release(&key); + return 1; + } + if (add_branches(remote, branches, key.buf)) { + strbuf_release(&key); + return 1; + } + + strbuf_release(&key); + return 0; +} + +static int set_branches(int argc, const char **argv) +{ + int add_mode = 0; + struct option options[] = { + OPT_BOOLEAN('\0', "add", &add_mode, "add branch"), + OPT_END() + }; + + argc = parse_options(argc, argv, NULL, options, + builtin_remote_setbranches_usage, 0); + if (argc == 0) { + error("no remote specified"); + usage_with_options(builtin_remote_seturl_usage, options); + } + argv[argc] = NULL; + + return set_remote_branches(argv[0], argv + 1, add_mode); +} + static int set_url(int argc, const char **argv) { int i, push_mode = 0, add_mode = 0, delete_mode = 0; @@ -1379,10 +1460,10 @@ static int get_one_entry(struct remote *remote, void *priv) if (remote->url_nr > 0) { strbuf_addf(&url_buf, "%s (fetch)", remote->url[0]); - string_list_append(remote->name, list)->util = + string_list_append(list, remote->name)->util = strbuf_detach(&url_buf, NULL); } else - string_list_append(remote->name, list)->util = NULL; + string_list_append(list, remote->name)->util = NULL; if (remote->pushurl_nr) { url = remote->pushurl; url_nr = remote->pushurl_nr; @@ -1393,7 +1474,7 @@ static int get_one_entry(struct remote *remote, void *priv) for (i = 0; i < url_nr; i++) { strbuf_addf(&url_buf, "%s (push)", url[i]); - string_list_append(remote->name, list)->util = + string_list_append(list, remote->name)->util = strbuf_detach(&url_buf, NULL); } @@ -1449,6 +1530,8 @@ int cmd_remote(int argc, const char **argv, const char *prefix) result = rm(argc, argv); else if (!strcmp(argv[0], "set-head")) result = set_head(argc, argv); + else if (!strcmp(argv[0], "set-branches")) + result = set_branches(argc, argv); else if (!strcmp(argv[0], "set-url")) result = set_url(argc, argv); else if (!strcmp(argv[0], "show")) diff --git a/builtin/rerere.c b/builtin/rerere.c index 34f9acee91..980d5421ee 100644 --- a/builtin/rerere.c +++ b/builtin/rerere.c @@ -59,7 +59,7 @@ static void garbage_collect(struct string_list *rr) cutoff = (has_rerere_resolution(e->d_name) ? cutoff_resolve : cutoff_noresolve); if (then < now - cutoff * 86400) - string_list_append(e->d_name, &to_remove); + string_list_append(&to_remove, e->d_name); } for (i = 0; i < to_remove.nr; i++) unlink_rr_item(to_remove.items[i].string); @@ -89,7 +89,7 @@ static int diff_two(const char *file1, const char *label1, printf("--- a/%s\n+++ b/%s\n", label1, label2); fflush(stdout); memset(&xpp, 0, sizeof(xpp)); - xpp.flags = XDF_NEED_MINIMAL; + xpp.flags = 0; memset(&xecfg, 0, sizeof(xecfg)); xecfg.ctxlen = 3; ecb.outf = outf; diff --git a/builtin/rev-list.c b/builtin/rev-list.c index 51ceb19d88..efe9360e2f 100644 --- a/builtin/rev-list.c +++ b/builtin/rev-list.c @@ -50,6 +50,15 @@ static void show_commit(struct commit *commit, void *data) graph_show_commit(revs->graph); + if (revs->count) { + if (commit->object.flags & SYMMETRIC_LEFT) + revs->count_left++; + else + revs->count_right++; + finish_commit(commit, data); + return; + } + if (info->show_timestamp) printf("%lu ", commit->date); if (info->header_prefix) @@ -400,5 +409,12 @@ int cmd_rev_list(int argc, const char **argv, const char *prefix) quiet ? finish_object : show_object, &info); + if (revs.count) { + if (revs.left_right) + printf("%d\t%d\n", revs.count_left, revs.count_right); + else + printf("%d\n", revs.count_left + revs.count_right); + } + return 0; } diff --git a/builtin/rev-parse.c b/builtin/rev-parse.c index 8fbf9d0db6..b676e29635 100644 --- a/builtin/rev-parse.c +++ b/builtin/rev-parse.c @@ -408,7 +408,8 @@ static int cmd_parseopt(int argc, const char **argv, const char *prefix) memset(opts + onb, 0, sizeof(opts[onb])); argc = parse_options(argc, argv, prefix, opts, usage, keep_dashdash ? PARSE_OPT_KEEP_DASHDASH : 0 | - stop_at_non_option ? PARSE_OPT_STOP_AT_NON_OPTION : 0); + stop_at_non_option ? PARSE_OPT_STOP_AT_NON_OPTION : 0 | + PARSE_OPT_SHELL_EVAL); strbuf_addf(&parsed, " --"); sq_quote_argv(&parsed, argv, 0); diff --git a/builtin/shortlog.c b/builtin/shortlog.c index 5089502800..0a9681ba7e 100644 --- a/builtin/shortlog.c +++ b/builtin/shortlog.c @@ -84,7 +84,7 @@ static void insert_one_record(struct shortlog *log, snprintf(namebuf + len, room, " <%.*s>", maillen, emailbuf); } - item = string_list_insert(namebuf, &log->list); + item = string_list_insert(&log->list, namebuf); if (item->util == NULL) item->util = xcalloc(1, sizeof(struct string_list)); @@ -115,7 +115,7 @@ static void insert_one_record(struct shortlog *log, } } - string_list_append(buffer, item->util); + string_list_append(item->util, buffer); } static void read_from_stdin(struct shortlog *log) diff --git a/builtin/show-ref.c b/builtin/show-ref.c index 17ada88dfb..0b2a9ad1a9 100644 --- a/builtin/show-ref.c +++ b/builtin/show-ref.c @@ -105,7 +105,7 @@ match: static int add_existing(const char *refname, const unsigned char *sha1, int flag, void *cbdata) { struct string_list *list = (struct string_list *)cbdata; - string_list_insert(refname, list); + string_list_insert(list, refname); return 0; } @@ -361,7 +361,7 @@ enum object_type { OBJ_OFS_DELTA = 6, OBJ_REF_DELTA = 7, OBJ_ANY, - OBJ_MAX, + OBJ_MAX }; static inline enum object_type object_type(unsigned int mode) @@ -547,7 +547,6 @@ extern int core_compression_seen; extern size_t packed_git_window_size; extern size_t packed_git_limit; extern size_t delta_base_cache_limit; -extern int auto_crlf; extern int read_replace_refs; extern int fsync_object_files; extern int core_preload_index; @@ -556,32 +555,53 @@ extern int core_apply_sparse_checkout; enum safe_crlf { SAFE_CRLF_FALSE = 0, SAFE_CRLF_FAIL = 1, - SAFE_CRLF_WARN = 2, + SAFE_CRLF_WARN = 2 }; extern enum safe_crlf safe_crlf; +enum auto_crlf { + AUTO_CRLF_FALSE = 0, + AUTO_CRLF_TRUE = 1, + AUTO_CRLF_INPUT = -1, +}; + +extern enum auto_crlf auto_crlf; + +enum eol { + EOL_UNSET, + EOL_CRLF, + EOL_LF, +#ifdef NATIVE_CRLF + EOL_NATIVE = EOL_CRLF +#else + EOL_NATIVE = EOL_LF +#endif +}; + +extern enum eol eol; + enum branch_track { BRANCH_TRACK_UNSPECIFIED = -1, BRANCH_TRACK_NEVER = 0, BRANCH_TRACK_REMOTE, BRANCH_TRACK_ALWAYS, BRANCH_TRACK_EXPLICIT, - BRANCH_TRACK_OVERRIDE, + BRANCH_TRACK_OVERRIDE }; enum rebase_setup_type { AUTOREBASE_NEVER = 0, AUTOREBASE_LOCAL, AUTOREBASE_REMOTE, - AUTOREBASE_ALWAYS, + AUTOREBASE_ALWAYS }; enum push_default_type { PUSH_DEFAULT_NOTHING = 0, PUSH_DEFAULT_MATCHING, PUSH_DEFAULT_TRACKING, - PUSH_DEFAULT_CURRENT, + PUSH_DEFAULT_CURRENT }; extern enum branch_track git_branch_track; @@ -590,7 +610,7 @@ extern enum push_default_type push_default; enum object_creation_mode { OBJECT_CREATION_USES_HARDLINKS = 0, - OBJECT_CREATION_USES_RENAMES = 1, + OBJECT_CREATION_USES_RENAMES = 1 }; extern enum object_creation_mode object_creation_mode; @@ -670,7 +690,7 @@ enum sharedrepo { OLD_PERM_GROUP = 1, OLD_PERM_EVERYBODY = 2, PERM_GROUP = 0660, - PERM_EVERYBODY = 0664, + PERM_EVERYBODY = 0664 }; int git_config_perm(const char *var, const char *value); int set_shared_perm(const char *path, int mode); @@ -730,12 +750,23 @@ static inline unsigned int hexval(unsigned char c) #define MINIMUM_ABBREV 4 #define DEFAULT_ABBREV 7 +struct object_context { + unsigned char tree[20]; + char path[PATH_MAX]; + unsigned mode; +}; + extern int get_sha1(const char *str, unsigned char *sha1); extern int get_sha1_with_mode_1(const char *str, unsigned char *sha1, unsigned *mode, int gently, const char *prefix); static inline int get_sha1_with_mode(const char *str, unsigned char *sha1, unsigned *mode) { return get_sha1_with_mode_1(str, sha1, mode, 1, NULL); } +extern int get_sha1_with_context_1(const char *name, unsigned char *sha1, struct object_context *orc, int gently, const char *prefix); +static inline int get_sha1_with_context(const char *str, unsigned char *sha1, struct object_context *orc) +{ + return get_sha1_with_context_1(str, sha1, orc, 1, NULL); +} extern int get_sha1_hex(const char *hex, unsigned char *sha1); extern char *sha1_to_hex(const unsigned char *sha1); /* static buffer result! */ extern int read_ref(const char *filename, unsigned char *sha1); @@ -882,7 +913,7 @@ struct ref { REF_STATUS_REJECT_NODELETE, REF_STATUS_UPTODATE, REF_STATUS_REMOTE_REJECT, - REF_STATUS_EXPECTING_REPORT, + REF_STATUS_EXPECTING_REPORT } status; char *remote_status; struct ref *peer_ref; /* when renaming */ diff --git a/combine-diff.c b/combine-diff.c index 7557136c82..655fa89d8a 100644 --- a/combine-diff.c +++ b/combine-diff.c @@ -220,7 +220,7 @@ static void combine_diff(const unsigned char *parent, unsigned int mode, parent_file.ptr = grab_blob(parent, mode, &sz); parent_file.size = sz; memset(&xpp, 0, sizeof(xpp)); - xpp.flags = XDF_NEED_MINIMAL; + xpp.flags = 0; memset(&xecfg, 0, sizeof(xecfg)); memset(&state, 0, sizeof(state)); state.nmask = nmask; @@ -60,7 +60,7 @@ enum cmit_fmt { CMIT_FMT_EMAIL, CMIT_FMT_USERFORMAT, - CMIT_FMT_UNSPECIFIED, + CMIT_FMT_UNSPECIFIED }; struct pretty_print_context diff --git a/compat/mingw.h b/compat/mingw.h index 0e3e743041..3b2477be5f 100644 --- a/compat/mingw.h +++ b/compat/mingw.h @@ -80,7 +80,7 @@ static inline int fork(void) static inline unsigned int alarm(unsigned int seconds) { return 0; } static inline int fsync(int fd) -{ return 0; } +{ return _commit(fd); } static inline int getppid(void) { return 1; } static inline void sync(void) @@ -89,7 +89,7 @@ static inline int getuid() { return 1; } static inline struct passwd *getpwnam(const char *name) { return NULL; } -static inline int fcntl(int fd, int cmd, long arg) +static inline int fcntl(int fd, int cmd, ...) { if (cmd == F_GETFD || cmd == F_SETFD) return 0; diff --git a/compat/win32/pthread.c b/compat/win32/pthread.c index 0f949fc425..010e875ec4 100644 --- a/compat/win32/pthread.c +++ b/compat/win32/pthread.c @@ -16,6 +16,7 @@ static unsigned __stdcall win32_start_routine(void *arg) { pthread_t *thread = arg; + thread->tid = GetCurrentThreadId(); thread->arg = thread->start_routine(thread->arg); return 0; } @@ -49,6 +50,13 @@ int win32_pthread_join(pthread_t *thread, void **value_ptr) } } +pthread_t pthread_self(void) +{ + pthread_t t = { 0 }; + t.tid = GetCurrentThreadId(); + return t; +} + int pthread_cond_init(pthread_cond_t *cond, const void *unused) { cond->waiters = 0; diff --git a/compat/win32/pthread.h b/compat/win32/pthread.h index a45f8d66df..2e20548557 100644 --- a/compat/win32/pthread.h +++ b/compat/win32/pthread.h @@ -58,6 +58,7 @@ typedef struct { HANDLE handle; void *(*start_routine)(void*); void *arg; + DWORD tid; } pthread_t; extern int pthread_create(pthread_t *thread, const void *unused, @@ -71,4 +72,28 @@ extern int pthread_create(pthread_t *thread, const void *unused, extern int win32_pthread_join(pthread_t *thread, void **value_ptr); +#define pthread_equal(t1, t2) ((t1).tid == (t2).tid) +extern pthread_t pthread_self(void); + +static inline int pthread_exit(void *ret) +{ + ExitThread((DWORD)ret); +} + +typedef DWORD pthread_key_t; +static inline int pthread_key_create(pthread_key_t *keyp, void (*destructor)(void *value)) +{ + return (*keyp = TlsAlloc()) == TLS_OUT_OF_INDEXES ? EAGAIN : 0; +} + +static inline int pthread_setspecific(pthread_key_t key, const void *value) +{ + return TlsSetValue(key, (void *)value) ? 0 : EINVAL; +} + +static inline void *pthread_getspecific(pthread_key_t key) +{ + return TlsGetValue(key); +} + #endif /* PTHREAD_H */ @@ -517,7 +517,9 @@ static int git_default_core_config(const char *var, const char *value) if (!strcmp(var, "core.autocrlf")) { if (value && !strcasecmp(value, "input")) { - auto_crlf = -1; + if (eol == EOL_CRLF) + return error("core.autocrlf=input conflicts with core.eol=crlf"); + auto_crlf = AUTO_CRLF_INPUT; return 0; } auto_crlf = git_config_bool(var, value); @@ -533,6 +535,20 @@ static int git_default_core_config(const char *var, const char *value) return 0; } + if (!strcmp(var, "core.eol")) { + if (value && !strcasecmp(value, "lf")) + eol = EOL_LF; + else if (value && !strcasecmp(value, "crlf")) + eol = EOL_CRLF; + else if (value && !strcasecmp(value, "native")) + eol = EOL_NATIVE; + else + eol = EOL_UNSET; + if (eol == EOL_CRLF && auto_crlf == AUTO_CRLF_INPUT) + return error("core.autocrlf=input conflicts with core.eol=crlf"); + return 0; + } + if (!strcmp(var, "core.notesref")) { notes_ref_name = xstrdup(value); return 0; diff --git a/config.mak.in b/config.mak.in index 0d4b64d076..b4e65c32b2 100644 --- a/config.mak.in +++ b/config.mak.in @@ -3,10 +3,12 @@ CC = @CC@ CFLAGS = @CFLAGS@ +CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ CC_LD_DYNPATH = @CC_LD_DYNPATH@ AR = @AR@ TAR = @TAR@ +DIFF = @DIFF@ #INSTALL = @INSTALL@ # needs install-sh or install.sh in sources TCLTK_PATH = @TCLTK_PATH@ @@ -42,6 +44,7 @@ NO_D_TYPE_IN_DIRENT=@NO_D_TYPE_IN_DIRENT@ NO_SOCKADDR_STORAGE=@NO_SOCKADDR_STORAGE@ NO_IPV6=@NO_IPV6@ NO_C99_FORMAT=@NO_C99_FORMAT@ +NO_HSTRERROR=@NO_HSTRERROR@ NO_STRCASESTR=@NO_STRCASESTR@ NO_MEMMEM=@NO_MEMMEM@ NO_STRLCPY=@NO_STRLCPY@ @@ -51,10 +54,15 @@ NO_SETENV=@NO_SETENV@ NO_UNSETENV=@NO_UNSETENV@ NO_MKDTEMP=@NO_MKDTEMP@ NO_MKSTEMPS=@NO_MKSTEMPS@ +NO_INET_NTOP=@NO_INET_NTOP@ +NO_INET_PTON=@NO_INET_PTON@ NO_ICONV=@NO_ICONV@ OLD_ICONV=@OLD_ICONV@ NO_DEFLATE_BOUND=@NO_DEFLATE_BOUND@ +INLINE=@INLINE@ +SOCKLEN_T=@SOCKLEN_T@ FREAD_READS_DIRECTORIES=@FREAD_READS_DIRECTORIES@ SNPRINTF_RETURNS_BOGUS=@SNPRINTF_RETURNS_BOGUS@ NO_PTHREADS=@NO_PTHREADS@ +PTHREAD_CFLAGS=@PTHREAD_CFLAGS@ PTHREAD_LIBS=@PTHREAD_LIBS@ diff --git a/configure.ac b/configure.ac index 71038fcf1c..5601e8bac9 100644 --- a/configure.ac +++ b/configure.ac @@ -327,6 +327,12 @@ GIT_PARSE_WITH(tcltk)) AC_MSG_NOTICE([CHECKS for programs]) # AC_PROG_CC([cc gcc]) +AC_C_INLINE +case $ac_cv_c_inline in + inline | yes | no) ;; + *) AC_SUBST([INLINE], [$ac_cv_c_inline]) ;; +esac + # which switch to pass runtime path to dynamic libraries to the linker AC_CACHE_CHECK([if linker supports -R], git_cv_ld_dashr, [ SAVE_LDFLAGS="${LDFLAGS}" @@ -362,6 +368,7 @@ fi #AC_PROG_INSTALL # needs install-sh or install.sh in sources AC_CHECK_TOOLS(AR, [gar ar], :) AC_CHECK_PROGS(TAR, [gtar tar]) +AC_CHECK_PROGS(DIFF, [gnudiff gdiff diff]) # TCLTK_PATH will be set to some value if we want Tcl/Tk # or will be empty otherwise. if test -z "$NO_TCLTK"; then @@ -544,13 +551,47 @@ AC_SUBST(NEEDS_SOCKET) test -n "$NEEDS_SOCKET" && LIBS="$LIBS -lsocket" # -# Define NEEDS_RESOLV if linking with -lnsl and/or -lsocket is not enough. -# Notably on Solaris hstrerror resides in libresolv and on Solaris 7 -# inet_ntop and inet_pton additionally reside there. -AC_CHECK_LIB([c], [hstrerror], -[NEEDS_RESOLV=], -[NEEDS_RESOLV=YesPlease]) +# The next few tests will define NEEDS_RESOLV if linking with +# libresolv provides some of the functions we would normally get +# from libc. +NEEDS_RESOLV= AC_SUBST(NEEDS_RESOLV) +# +# Define NO_INET_NTOP if linking with -lresolv is not enough. +# Solaris 2.7 in particular hos inet_ntop in -lresolv. +NO_INET_NTOP= +AC_SUBST(NO_INET_NTOP) +AC_CHECK_FUNC([inet_ntop], + [], + [AC_CHECK_LIB([resolv], [inet_ntop], + [NEEDS_RESOLV=YesPlease], + [NO_INET_NTOP=YesPlease]) +]) +# +# Define NO_INET_PTON if linking with -lresolv is not enough. +# Solaris 2.7 in particular hos inet_pton in -lresolv. +NO_INET_PTON= +AC_SUBST(NO_INET_PTON) +AC_CHECK_FUNC([inet_pton], + [], + [AC_CHECK_LIB([resolv], [inet_pton], + [NEEDS_RESOLV=YesPlease], + [NO_INET_PTON=YesPlease]) +]) +# +# Define NO_HSTRERROR if linking with -lresolv is not enough. +# Solaris 2.6 in particular has no hstrerror, even in -lresolv. +NO_HSTRERROR= +AC_CHECK_FUNC([hstrerror], + [], + [AC_CHECK_LIB([resolv], [hstrerror], + [NEEDS_RESOLV=YesPlease], + [NO_HSTRERROR=YesPlease]) +]) +AC_SUBST(NO_HSTRERROR) +# +# If any of the above tests determined that -lresolv is needed at +# build-time, also set it here for remaining configure-time checks. test -n "$NEEDS_RESOLV" && LIBS="$LIBS -lresolv" AC_CHECK_LIB([c], [basename], @@ -598,6 +639,12 @@ AC_SUBST(OLD_ICONV) ## Checks for typedefs, structures, and compiler characteristics. AC_MSG_NOTICE([CHECKS for typedefs, structures, and compiler characteristics]) # +TYPE_SOCKLEN_T +case $ac_cv_type_socklen_t in + yes) ;; + *) AC_SUBST([SOCKLEN_T], [$git_cv_socklen_t_equiv]) ;; +esac + # Define NO_D_INO_IN_DIRENT if you don't have d_ino in your struct dirent. AC_CHECK_MEMBER(struct dirent.d_ino, [NO_D_INO_IN_DIRENT=], @@ -808,7 +855,11 @@ AC_DEFUN([PTHREADTEST_SRC], [ int main(void) { pthread_mutex_t test_mutex; - return (0); + int retcode = 0; + retcode |= pthread_mutex_init(&test_mutex,(void *)0); + retcode |= pthread_mutex_lock(&test_mutex); + retcode |= pthread_mutex_unlock(&test_mutex); + return retcode; } ]) @@ -825,7 +876,8 @@ if test -n "$USER_NOPTHREAD"; then # handle these separately since PTHREAD_CFLAGS could be '-lpthreads # -D_REENTRANT' or some such. elif test -z "$PTHREAD_CFLAGS"; then - for opt in -pthread -lpthread; do + threads_found=no + for opt in -mt -pthread -lpthread; do old_CFLAGS="$CFLAGS" CFLAGS="$opt $CFLAGS" AC_MSG_CHECKING([Checking for POSIX Threads with '$opt']) @@ -833,11 +885,18 @@ elif test -z "$PTHREAD_CFLAGS"; then [AC_MSG_RESULT([yes]) NO_PTHREADS= PTHREAD_LIBS="$opt" + PTHREAD_CFLAGS="$opt" + threads_found=yes break ], [AC_MSG_RESULT([no])]) CFLAGS="$old_CFLAGS" done + if test $threads_found != yes; then + AC_CHECK_LIB([pthread], [pthread_create], + [PTHREAD_LIBS="-lpthread"], + [NO_PTHREADS=UnfortunatelyYes]) + fi else old_CFLAGS="$CFLAGS" CFLAGS="$PTHREAD_CFLAGS $CFLAGS" @@ -854,6 +913,7 @@ fi CFLAGS="$old_CFLAGS" +AC_SUBST(PTHREAD_CFLAGS) AC_SUBST(PTHREAD_LIBS) AC_SUBST(NO_PTHREADS) @@ -5,6 +5,7 @@ #include "refs.h" #include "run-command.h" #include "remote.h" +#include "url.h" static char *server_capabilities; @@ -131,7 +132,7 @@ int path_match(const char *path, int nr, char **match) enum protocol { PROTO_LOCAL = 1, PROTO_SSH, - PROTO_GIT, + PROTO_GIT }; static enum protocol get_protocol(const char *name) @@ -450,7 +451,7 @@ static struct child_process no_fork; struct child_process *git_connect(int fd[2], const char *url_orig, const char *prog, int flags) { - char *url = xstrdup(url_orig); + char *url; char *host, *path; char *end; int c; @@ -466,6 +467,11 @@ struct child_process *git_connect(int fd[2], const char *url_orig, */ signal(SIGCHLD, SIG_DFL); + if (is_url(url_orig)) + url = url_decode(url_orig); + else + url = xstrdup(url_orig); + host = strstr(url, "://"); if (host) { *host = '\0'; diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index 57245a8c01..67569901e7 100755 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -42,6 +42,24 @@ # set GIT_PS1_SHOWUNTRACKEDFILES to a nonempty value. If there're # untracked files, then a '%' will be shown next to the branch name. # +# If you would like to see the difference between HEAD and its +# upstream, set GIT_PS1_SHOWUPSTREAM="auto". A "<" indicates +# you are behind, ">" indicates you are ahead, and "<>" +# indicates you have diverged. You can further control +# behaviour by setting GIT_PS1_SHOWUPSTREAM to a space-separated +# list of values: +# verbose show number of commits ahead/behind (+/-) upstream +# legacy don't use the '--count' option available in recent +# versions of git-rev-list +# git always compare HEAD to @{upstream} +# svn always compare HEAD to your SVN upstream +# By default, __git_ps1 will compare HEAD to your SVN upstream +# if it can find one, or @{upstream} otherwise. Once you have +# set GIT_PS1_SHOWUPSTREAM, you can override it on a +# per-repository basis by setting the bash.showUpstream config +# variable. +# +# # To submit patches: # # *) Read Documentation/SubmittingPatches @@ -78,14 +96,133 @@ __gitdir () fi } +# stores the divergence from upstream in $p +# used by GIT_PS1_SHOWUPSTREAM +__git_ps1_show_upstream () +{ + local key value + local svn_remote=() svn_url_pattern count n + local upstream=git legacy="" verbose="" + + # get some config options from git-config + while read key value; do + case "$key" in + bash.showupstream) + GIT_PS1_SHOWUPSTREAM="$value" + if [[ -z "${GIT_PS1_SHOWUPSTREAM}" ]]; then + p="" + return + fi + ;; + svn-remote.*.url) + svn_remote[ $((${#svn_remote[@]} + 1)) ]="$value" + svn_url_pattern+="\\|$value" + upstream=svn+git # default upstream is SVN if available, else git + ;; + esac + done < <(git config -z --get-regexp '^(svn-remote\..*\.url|bash\.showupstream)$' 2>/dev/null | tr '\0\n' '\n ') + + # parse configuration values + for option in ${GIT_PS1_SHOWUPSTREAM}; do + case "$option" in + git|svn) upstream="$option" ;; + verbose) verbose=1 ;; + legacy) legacy=1 ;; + esac + done + + # Find our upstream + case "$upstream" in + git) upstream="@{upstream}" ;; + svn*) + # get the upstream from the "git-svn-id: ..." in a commit message + # (git-svn uses essentially the same procedure internally) + local svn_upstream=($(git log --first-parent -1 \ + --grep="^git-svn-id: \(${svn_url_pattern:2}\)" 2>/dev/null)) + if [[ 0 -ne ${#svn_upstream[@]} ]]; then + svn_upstream=${svn_upstream[ ${#svn_upstream[@]} - 2 ]} + svn_upstream=${svn_upstream%@*} + for ((n=1; "$n" <= "${#svn_remote[@]}"; ++n)); do + svn_upstream=${svn_upstream#${svn_remote[$n]}} + done + + if [[ -z "$svn_upstream" ]]; then + # default branch name for checkouts with no layout: + upstream=${GIT_SVN_ID:-git-svn} + else + upstream=${svn_upstream#/} + fi + elif [[ "svn+git" = "$upstream" ]]; then + upstream="@{upstream}" + fi + ;; + esac + + # Find how many commits we are ahead/behind our upstream + if [[ -z "$legacy" ]]; then + count="$(git rev-list --count --left-right \ + "$upstream"...HEAD 2>/dev/null)" + else + # produce equivalent output to --count for older versions of git + local commits + if commits="$(git rev-list --left-right "$upstream"...HEAD 2>/dev/null)" + then + local commit behind=0 ahead=0 + for commit in $commits + do + case "$commit" in + "<"*) let ++behind + ;; + *) let ++ahead + ;; + esac + done + count="$behind $ahead" + else + count="" + fi + fi + + # calculate the result + if [[ -z "$verbose" ]]; then + case "$count" in + "") # no upstream + p="" ;; + "0 0") # equal to upstream + p="=" ;; + "0 "*) # ahead of upstream + p=">" ;; + *" 0") # behind upstream + p="<" ;; + *) # diverged from upstream + p="<>" ;; + esac + else + case "$count" in + "") # no upstream + p="" ;; + "0 0") # equal to upstream + p=" u=" ;; + "0 "*) # ahead of upstream + p=" u+${count#0 }" ;; + *" 0") # behind upstream + p=" u-${count% 0}" ;; + *) # diverged from upstream + p=" u+${count#* }-${count% *}" ;; + esac + fi + +} + + # __git_ps1 accepts 0 or 1 arguments (i.e., format string) # returns text to add to bash PS1 prompt (includes branch name) __git_ps1 () { local g="$(__gitdir)" if [ -n "$g" ]; then - local r - local b + local r="" + local b="" if [ -f "$g/rebase-merge/interactive" ]; then r="|REBASE-i" b="$(cat "$g/rebase-merge/head-name")" @@ -127,11 +264,12 @@ __git_ps1 () } fi - local w - local i - local s - local u - local c + local w="" + local i="" + local s="" + local u="" + local c="" + local p="" if [ "true" = "$(git rev-parse --is-inside-git-dir 2>/dev/null)" ]; then if [ "true" = "$(git rev-parse --is-bare-repository 2>/dev/null)" ]; then @@ -159,10 +297,14 @@ __git_ps1 () u="%" fi fi + + if [ -n "${GIT_PS1_SHOWUPSTREAM-}" ]; then + __git_ps1_show_upstream + fi fi local f="$w$i$s$u" - printf "${1:- (%s)}" "$c${b##refs/heads/}${f:+ $f}$r" + printf "${1:- (%s)}" "$c${b##refs/heads/}${f:+ $f}$r$p" fi } @@ -842,7 +984,7 @@ _git_checkout () --*) __gitcomp " --quiet --ours --theirs --track --no-track --merge - --conflict= --patch + --conflict= --orphan --patch " ;; *) @@ -1052,7 +1194,7 @@ _git_format_patch () --numbered --start-number --numbered-files --keep-subject - --signoff + --signoff --signature --no-signature --in-reply-to= --cc= --full-index --binary --not --all @@ -1726,6 +1868,7 @@ _git_config () format.headers format.numbered format.pretty + format.signature format.signoff format.subjectprefix format.suffix @@ -8,13 +8,17 @@ * This should use the pathname to decide on whether it wants to do some * more interesting conversions (automatic gzip/unzip, general format * conversions etc etc), but by default it just does automatic CRLF<->LF - * translation when the "auto_crlf" option is set. + * translation when the "text" attribute or "auto_crlf" option is set. */ -#define CRLF_GUESS (-1) -#define CRLF_BINARY 0 -#define CRLF_TEXT 1 -#define CRLF_INPUT 2 +enum action { + CRLF_GUESS = -1, + CRLF_BINARY = 0, + CRLF_TEXT, + CRLF_INPUT, + CRLF_CRLF, + CRLF_AUTO, +}; struct text_stat { /* NUL, CR, LF and CRLF counts */ @@ -89,49 +93,111 @@ static int is_binary(unsigned long size, struct text_stat *stats) return 0; } -static void check_safe_crlf(const char *path, int action, +static enum eol determine_output_conversion(enum action action) { + switch (action) { + case CRLF_BINARY: + return EOL_UNSET; + case CRLF_CRLF: + return EOL_CRLF; + case CRLF_INPUT: + return EOL_LF; + case CRLF_GUESS: + if (!auto_crlf) + return EOL_UNSET; + /* fall through */ + case CRLF_TEXT: + case CRLF_AUTO: + if (auto_crlf == AUTO_CRLF_TRUE) + return EOL_CRLF; + else if (auto_crlf == AUTO_CRLF_INPUT) + return EOL_LF; + else if (eol == EOL_UNSET) + return EOL_NATIVE; + } + return eol; +} + +static void check_safe_crlf(const char *path, enum action action, struct text_stat *stats, enum safe_crlf checksafe) { if (!checksafe) return; - if (action == CRLF_INPUT || auto_crlf <= 0) { + if (determine_output_conversion(action) == EOL_LF) { /* * CRLFs would not be restored by checkout: * check if we'd remove CRLFs */ if (stats->crlf) { if (checksafe == SAFE_CRLF_WARN) - warning("CRLF will be replaced by LF in %s.", path); + warning("CRLF will be replaced by LF in %s.\nThe file will have its original line endings in your working directory.", path); else /* i.e. SAFE_CRLF_FAIL */ die("CRLF would be replaced by LF in %s.", path); } - } else if (auto_crlf > 0) { + } else if (determine_output_conversion(action) == EOL_CRLF) { /* * CRLFs would be added by checkout: * check if we have "naked" LFs */ if (stats->lf != stats->crlf) { if (checksafe == SAFE_CRLF_WARN) - warning("LF will be replaced by CRLF in %s", path); + warning("LF will be replaced by CRLF in %s.\nThe file will have its original line endings in your working directory.", path); else /* i.e. SAFE_CRLF_FAIL */ die("LF would be replaced by CRLF in %s", path); } } } +static int has_cr_in_index(const char *path) +{ + int pos, len; + unsigned long sz; + enum object_type type; + void *data; + int has_cr; + struct index_state *istate = &the_index; + + len = strlen(path); + pos = index_name_pos(istate, path, len); + if (pos < 0) { + /* + * We might be in the middle of a merge, in which + * case we would read stage #2 (ours). + */ + int i; + for (i = -pos - 1; + (pos < 0 && i < istate->cache_nr && + !strcmp(istate->cache[i]->name, path)); + i++) + if (ce_stage(istate->cache[i]) == 2) + pos = i; + } + if (pos < 0) + return 0; + data = read_sha1_file(istate->cache[pos]->sha1, &type, &sz); + if (!data || type != OBJ_BLOB) { + free(data); + return 0; + } + + has_cr = memchr(data, '\r', sz) != NULL; + free(data); + return has_cr; +} + static int crlf_to_git(const char *path, const char *src, size_t len, - struct strbuf *buf, int action, enum safe_crlf checksafe) + struct strbuf *buf, enum action action, enum safe_crlf checksafe) { struct text_stat stats; char *dst; - if ((action == CRLF_BINARY) || !auto_crlf || !len) + if (action == CRLF_BINARY || + (action == CRLF_GUESS && auto_crlf == AUTO_CRLF_FALSE) || !len) return 0; gather_stats(src, len, &stats); - if (action == CRLF_GUESS) { + if (action == CRLF_AUTO || action == CRLF_GUESS) { /* * We're currently not going to even try to convert stuff * that has bare CR characters. Does anybody do that crazy @@ -145,6 +211,15 @@ static int crlf_to_git(const char *path, const char *src, size_t len, */ if (is_binary(len, &stats)) return 0; + + if (action == CRLF_GUESS) { + /* + * If the file in the index has any CR in it, do not convert. + * This is the new safer autocrlf handling. + */ + if (has_cr_in_index(path)) + return 0; + } } check_safe_crlf(path, action, &stats, checksafe); @@ -157,7 +232,7 @@ static int crlf_to_git(const char *path, const char *src, size_t len, if (strbuf_avail(buf) + buf->len < len) strbuf_grow(buf, len - buf->len); dst = buf->buf; - if (action == CRLF_GUESS) { + if (action == CRLF_AUTO || action == CRLF_GUESS) { /* * If we guessed, we already know we rejected a file with * lone CR, and we can strip a CR without looking at what @@ -180,16 +255,12 @@ static int crlf_to_git(const char *path, const char *src, size_t len, } static int crlf_to_worktree(const char *path, const char *src, size_t len, - struct strbuf *buf, int action) + struct strbuf *buf, enum action action) { char *to_free = NULL; struct text_stat stats; - if ((action == CRLF_BINARY) || (action == CRLF_INPUT) || - auto_crlf <= 0) - return 0; - - if (!len) + if (!len || determine_output_conversion(action) != EOL_CRLF) return 0; gather_stats(src, len, &stats); @@ -202,7 +273,14 @@ static int crlf_to_worktree(const char *path, const char *src, size_t len, if (stats.lf == stats.crlf) return 0; - if (action == CRLF_GUESS) { + if (action == CRLF_AUTO || action == CRLF_GUESS) { + if (action == CRLF_GUESS) { + /* If we have any CR or CRLF line endings, we do not touch it */ + /* This is the new safer autocrlf-handling */ + if (stats.cr > 0 || stats.crlf > 0) + return 0; + } + /* If we have any bare CR characters, we're not going to touch it */ if (stats.cr != stats.crlf) return 0; @@ -249,7 +327,9 @@ static int filter_buffer(int in, int out, void *data) struct child_process child_process; struct filter_params *params = (struct filter_params *)data; int write_err, status; - const char *argv[] = { params->cmd, NULL }; + const char *argv[] = { NULL, NULL }; + + argv[0] = params->cmd; memset(&child_process, 0, sizeof(child_process)); child_process.argv = argv; @@ -374,12 +454,16 @@ static int read_convert_config(const char *var, const char *value, void *cb) static void setup_convert_check(struct git_attr_check *check) { + static struct git_attr *attr_text; static struct git_attr *attr_crlf; + static struct git_attr *attr_eol; static struct git_attr *attr_ident; static struct git_attr *attr_filter; - if (!attr_crlf) { + if (!attr_text) { + attr_text = git_attr("text"); attr_crlf = git_attr("crlf"); + attr_eol = git_attr("eol"); attr_ident = git_attr("ident"); attr_filter = git_attr("filter"); user_convert_tail = &user_convert; @@ -388,6 +472,8 @@ static void setup_convert_check(struct git_attr_check *check) check[0].attr = attr_crlf; check[1].attr = attr_ident; check[2].attr = attr_filter; + check[3].attr = attr_eol; + check[4].attr = attr_text; } static int count_ident(const char *cp, unsigned long size) @@ -425,6 +511,8 @@ static int count_ident(const char *cp, unsigned long size) cnt++; break; } + if (ch == '\n') + break; } } return cnt; @@ -455,6 +543,11 @@ static int ident_to_git(const char *path, const char *src, size_t len, dollar = memchr(src + 3, '$', len - 3); if (!dollar) break; + if (memchr(src + 3, '\n', dollar - src - 3)) { + /* Line break before the next dollar. */ + continue; + } + memcpy(dst, "Id$", 3); dst += 3; len -= dollar + 1 - src; @@ -470,7 +563,7 @@ static int ident_to_worktree(const char *path, const char *src, size_t len, struct strbuf *buf, int ident) { unsigned char sha1[20]; - char *to_free = NULL, *dollar; + char *to_free = NULL, *dollar, *spc; int cnt; if (!ident) @@ -506,7 +599,10 @@ static int ident_to_worktree(const char *path, const char *src, size_t len, } else if (src[2] == ':') { /* * It's possible that an expanded Id has crept its way into the - * repository, we cope with that by stripping the expansion out + * repository, we cope with that by stripping the expansion out. + * This is probably not a good idea, since it will cause changes + * on checkout, which won't go away by stash, but let's keep it + * for git-style ids. */ dollar = memchr(src + 3, '$', len - 3); if (!dollar) { @@ -514,6 +610,20 @@ static int ident_to_worktree(const char *path, const char *src, size_t len, break; } + if (memchr(src + 3, '\n', dollar - src - 3)) { + /* Line break before the next dollar. */ + continue; + } + + spc = memchr(src + 4, ' ', dollar - src - 4); + if (spc && spc < dollar-1) { + /* There are spaces in unexpected places. + * This is probably an id from some other + * versioning system. Keep it for now. + */ + continue; + } + len -= dollar + 1 - src; src = dollar + 1; } else { @@ -544,9 +654,24 @@ static int git_path_check_crlf(const char *path, struct git_attr_check *check) ; else if (!strcmp(value, "input")) return CRLF_INPUT; + else if (!strcmp(value, "auto")) + return CRLF_AUTO; return CRLF_GUESS; } +static int git_path_check_eol(const char *path, struct git_attr_check *check) +{ + const char *value = check->value; + + if (ATTR_UNSET(value)) + ; + else if (!strcmp(value, "lf")) + return EOL_LF; + else if (!strcmp(value, "crlf")) + return EOL_CRLF; + return EOL_UNSET; +} + static struct convert_driver *git_path_check_convert(const char *path, struct git_attr_check *check) { @@ -568,20 +693,34 @@ static int git_path_check_ident(const char *path, struct git_attr_check *check) return !!ATTR_TRUE(value); } +enum action determine_action(enum action text_attr, enum eol eol_attr) { + if (text_attr == CRLF_BINARY) + return CRLF_BINARY; + if (eol_attr == EOL_LF) + return CRLF_INPUT; + if (eol_attr == EOL_CRLF) + return CRLF_CRLF; + return text_attr; +} + int convert_to_git(const char *path, const char *src, size_t len, struct strbuf *dst, enum safe_crlf checksafe) { - struct git_attr_check check[3]; - int crlf = CRLF_GUESS; + struct git_attr_check check[5]; + enum action action = CRLF_GUESS; + enum eol eol_attr = EOL_UNSET; int ident = 0, ret = 0; const char *filter = NULL; setup_convert_check(check); if (!git_checkattr(path, ARRAY_SIZE(check), check)) { struct convert_driver *drv; - crlf = git_path_check_crlf(path, check + 0); + action = git_path_check_crlf(path, check + 4); + if (action == CRLF_GUESS) + action = git_path_check_crlf(path, check + 0); ident = git_path_check_ident(path, check + 1); drv = git_path_check_convert(path, check + 2); + eol_attr = git_path_check_eol(path, check + 3); if (drv && drv->clean) filter = drv->clean; } @@ -591,7 +730,8 @@ int convert_to_git(const char *path, const char *src, size_t len, src = dst->buf; len = dst->len; } - ret |= crlf_to_git(path, src, len, dst, crlf, checksafe); + action = determine_action(action, eol_attr); + ret |= crlf_to_git(path, src, len, dst, action, checksafe); if (ret) { src = dst->buf; len = dst->len; @@ -601,17 +741,21 @@ int convert_to_git(const char *path, const char *src, size_t len, int convert_to_working_tree(const char *path, const char *src, size_t len, struct strbuf *dst) { - struct git_attr_check check[3]; - int crlf = CRLF_GUESS; + struct git_attr_check check[5]; + enum action action = CRLF_GUESS; + enum eol eol_attr = EOL_UNSET; int ident = 0, ret = 0; const char *filter = NULL; setup_convert_check(check); if (!git_checkattr(path, ARRAY_SIZE(check), check)) { struct convert_driver *drv; - crlf = git_path_check_crlf(path, check + 0); + action = git_path_check_crlf(path, check + 4); + if (action == CRLF_GUESS) + action = git_path_check_crlf(path, check + 0); ident = git_path_check_ident(path, check + 1); drv = git_path_check_convert(path, check + 2); + eol_attr = git_path_check_eol(path, check + 3); if (drv && drv->smudge) filter = drv->smudge; } @@ -621,7 +765,8 @@ int convert_to_working_tree(const char *path, const char *src, size_t len, struc src = dst->buf; len = dst->len; } - ret |= crlf_to_worktree(path, src, len, dst, crlf); + action = determine_action(action, eol_attr); + ret |= crlf_to_worktree(path, src, len, dst, action); if (ret) { src = dst->buf; len = dst->len; @@ -10,7 +10,7 @@ enum { A = GIT_ALPHA, D = GIT_DIGIT, G = GIT_GLOB_SPECIAL, /* *, ?, [, \\ */ - R = GIT_REGEX_SPECIAL, /* $, (, ), +, ., ^, {, | */ + R = GIT_REGEX_SPECIAL /* $, (, ), +, ., ^, {, | */ }; unsigned char sane_ctype[256] = { @@ -141,15 +141,14 @@ static char *path_ok(char *directory) } else if (interpolated_path && saw_extended_args) { struct strbuf expanded_path = STRBUF_INIT; - struct strbuf_expand_dict_entry dict[] = { - { "H", hostname }, - { "CH", canon_hostname }, - { "IP", ip_address }, - { "P", tcp_port }, - { "D", directory }, - { NULL } - }; - + struct strbuf_expand_dict_entry dict[6]; + + dict[0].placeholder = "H"; dict[0].value = hostname; + dict[1].placeholder = "CH"; dict[1].value = canon_hostname; + dict[2].placeholder = "IP"; dict[2].value = ip_address; + dict[3].placeholder = "P"; dict[3].value = tcp_port; + dict[4].placeholder = "D"; dict[4].value = directory; + dict[5].placeholder = NULL; dict[5].value = NULL; if (*dir != '/') { /* Allow only absolute */ logerror("'%s': Non-absolute path denied (interpolated-path active)", dir); @@ -343,7 +342,9 @@ static int upload_pack(void) { /* Timeout as string */ char timeout_buf[64]; - const char *argv[] = { "upload-pack", "--strict", timeout_buf, ".", NULL }; + const char *argv[] = { "upload-pack", "--strict", NULL, ".", NULL }; + + argv[2] = timeout_buf; snprintf(timeout_buf, sizeof timeout_buf, "--timeout=%u", timeout); return run_service_command(argv); @@ -229,6 +229,7 @@ static const struct { { "GMT", 0, 0, }, /* Greenwich Mean */ { "UTC", 0, 0, }, /* Universal (Coordinated) */ + { "Z", 0, 0, }, /* Zulu, alias for UTC */ { "WET", 0, 0, }, /* Western European */ { "BST", 0, 1, }, /* British Summer */ @@ -305,7 +306,7 @@ static int match_alpha(const char *date, struct tm *tm, int *offset) for (i = 0; i < ARRAY_SIZE(timezone_names); i++) { int match = match_string(date, timezone_names[i].name); - if (match >= 3) { + if (match >= 3 || match == strlen(timezone_names[i].name)) { int off = timezone_names[i].offset; /* This is bogus, but we like summer */ @@ -585,11 +586,17 @@ static int date_string(unsigned long date, int offset, char *buf, int len) /* Gr. strptime is crap for this; it doesn't have a way to require RFC2822 (i.e. English) day/month names, and it doesn't work correctly with %z. */ -int parse_date(const char *date, char *result, int maxlen) +int parse_date_toffset(const char *date, unsigned long *timestamp, int *offset) { struct tm tm; - int offset, tm_gmt; - time_t then; + int tm_gmt; + unsigned long dummy_timestamp; + int dummy_offset; + + if (!timestamp) + timestamp = &dummy_timestamp; + if (!offset) + offset = &dummy_offset; memset(&tm, 0, sizeof(tm)); tm.tm_year = -1; @@ -599,7 +606,7 @@ int parse_date(const char *date, char *result, int maxlen) tm.tm_hour = -1; tm.tm_min = -1; tm.tm_sec = -1; - offset = -1; + *offset = -1; tm_gmt = 0; for (;;) { @@ -611,11 +618,11 @@ int parse_date(const char *date, char *result, int maxlen) break; if (isalpha(c)) - match = match_alpha(date, &tm, &offset); + match = match_alpha(date, &tm, offset); else if (isdigit(c)) - match = match_digit(date, &tm, &offset, &tm_gmt); + match = match_digit(date, &tm, offset, &tm_gmt); else if ((c == '-' || c == '+') && isdigit(date[1])) - match = match_tz(date, &offset); + match = match_tz(date, offset); if (!match) { /* BAD CRAP */ @@ -626,16 +633,26 @@ int parse_date(const char *date, char *result, int maxlen) } /* mktime uses local timezone */ - then = tm_to_time_t(&tm); - if (offset == -1) - offset = (then - mktime(&tm)) / 60; + *timestamp = tm_to_time_t(&tm); + if (*offset == -1) + *offset = (*timestamp - mktime(&tm)) / 60; - if (then == -1) + if (*timestamp == -1) return -1; if (!tm_gmt) - then -= offset * 60; - return date_string(then, offset, result, maxlen); + *timestamp -= *offset * 60; + return 1; /* success */ +} + +int parse_date(const char *date, char *result, int maxlen) +{ + unsigned long timestamp; + int offset; + if (parse_date_toffset(date, ×tamp, &offset) > 0) + return date_string(timestamp, offset, result, maxlen); + else + return -1; } enum date_mode parse_date_format(const char *format) @@ -983,11 +1000,12 @@ static unsigned long approxidate_str(const char *date, unsigned long approxidate_relative(const char *date, const struct timeval *tv) { - char buffer[50]; + unsigned long timestamp; + int offset; int errors = 0; - if (parse_date(date, buffer, sizeof(buffer)) > 0) - return strtoul(buffer, NULL, 0); + if (parse_date_toffset(date, ×tamp, &offset) > 0) + return timestamp; return approxidate_str(date, tv, &errors); } @@ -995,14 +1013,15 @@ unsigned long approxidate_relative(const char *date, const struct timeval *tv) unsigned long approxidate_careful(const char *date, int *error_ret) { struct timeval tv; - char buffer[50]; + unsigned long timestamp; + int offset; int dummy = 0; if (!error_ret) error_ret = &dummy; - if (parse_date(date, buffer, sizeof(buffer)) > 0) { + if (parse_date_toffset(date, ×tamp, &offset) > 0) { *error_ret = 0; - return strtoul(buffer, NULL, 0); + return timestamp; } gettimeofday(&tv, NULL); diff --git a/diff-lib.c b/diff-lib.c index c9f6e05bad..8b8978ae6d 100644 --- a/diff-lib.c +++ b/diff-lib.c @@ -70,6 +70,7 @@ static int match_stat_with_submodule(struct diff_options *diffopt, int changed = ce_match_stat(ce, st, ce_option); if (S_ISGITLINK(ce->ce_mode) && !DIFF_OPT_TST(diffopt, IGNORE_SUBMODULES) + && !DIFF_OPT_TST(diffopt, IGNORE_DIRTY_SUBMODULES) && (!changed || DIFF_OPT_TST(diffopt, DIRTY_SUBMODULES))) { *dirty_submodule = is_submodule_modified(ce->name, DIFF_OPT_TST(diffopt, IGNORE_UNTRACKED_IN_SUBMODULES)); } diff --git a/diff-no-index.c b/diff-no-index.c index 4cd9dacbe8..43aeeba2e0 100644 --- a/diff-no-index.c +++ b/diff-no-index.c @@ -26,7 +26,7 @@ static int read_directory(const char *path, struct string_list *list) while ((e = readdir(dir))) if (strcmp(".", e->d_name) && strcmp("..", e->d_name)) - string_list_insert(e->d_name, list); + string_list_insert(list, e->d_name); closedir(dir); return 0; @@ -30,6 +30,7 @@ static const char *diff_word_regex_cfg; static const char *external_diff_cmd_cfg; int diff_auto_refresh_index = 1; static int diff_mnemonic_prefix; +static int diff_no_prefix; static char diff_colors[][COLOR_MAXLEN] = { GIT_COLOR_RESET, @@ -43,10 +44,6 @@ static char diff_colors[][COLOR_MAXLEN] = { GIT_COLOR_NORMAL, /* FUNCINFO */ }; -static void diff_filespec_load_driver(struct diff_filespec *one); -static size_t fill_textconv(struct userdiff_driver *driver, - struct diff_filespec *df, char **outbuf); - static int parse_diff_color_slot(const char *var, int ofs) { if (!strcasecmp(var+ofs, "plain")) @@ -101,6 +98,10 @@ int git_diff_ui_config(const char *var, const char *value, void *cb) diff_mnemonic_prefix = git_config_bool(var, value); return 0; } + if (!strcmp(var, "diff.noprefix")) { + diff_no_prefix = git_config_bool(var, value); + return 0; + } if (!strcmp(var, "diff.external")) return git_config_string(&external_diff_cmd_cfg, var, value); if (!strcmp(var, "diff.wordregex")) @@ -194,8 +195,8 @@ struct emit_callback { sane_truncate_fn truncate; const char **label_path; struct diff_words_data *diff_words; + struct diff_options *opt; int *found_changesp; - FILE *file; struct strbuf *header; }; @@ -282,11 +283,19 @@ static void check_blank_at_eof(mmfile_t *mf1, mmfile_t *mf2, ecbdata->blank_at_eof_in_postimage = (at - l2) + 1; } -static void emit_line_0(FILE *file, const char *set, const char *reset, +static void emit_line_0(struct diff_options *o, const char *set, const char *reset, int first, const char *line, int len) { int has_trailing_newline, has_trailing_carriage_return; int nofirst; + FILE *file = o->file; + + if (o->output_prefix) { + struct strbuf *msg = NULL; + msg = o->output_prefix(o, o->output_prefix_data); + assert(msg); + fwrite(msg->buf, msg->len, 1, file); + } if (len == 0) { has_trailing_newline = (first == '\n'); @@ -316,10 +325,10 @@ static void emit_line_0(FILE *file, const char *set, const char *reset, fputc('\n', file); } -static void emit_line(FILE *file, const char *set, const char *reset, +static void emit_line(struct diff_options *o, const char *set, const char *reset, const char *line, int len) { - emit_line_0(file, set, reset, line[0], line+1, len-1); + emit_line_0(o, set, reset, line[0], line+1, len-1); } static int new_blank_line_at_eof(struct emit_callback *ecbdata, const char *line, int len) @@ -341,15 +350,15 @@ static void emit_add_line(const char *reset, const char *set = diff_get_color(ecbdata->color_diff, DIFF_FILE_NEW); if (!*ws) - emit_line_0(ecbdata->file, set, reset, '+', line, len); + emit_line_0(ecbdata->opt, set, reset, '+', line, len); else if (new_blank_line_at_eof(ecbdata, line, len)) /* Blank line at EOF - paint '+' as well */ - emit_line_0(ecbdata->file, ws, reset, '+', line, len); + emit_line_0(ecbdata->opt, ws, reset, '+', line, len); else { /* Emit just the prefix, then the rest. */ - emit_line_0(ecbdata->file, set, reset, '+', "", 0); + emit_line_0(ecbdata->opt, set, reset, '+', "", 0); ws_check_emit(line, len, ecbdata->ws_rule, - ecbdata->file, set, reset, ws); + ecbdata->opt->file, set, reset, ws); } } @@ -362,6 +371,9 @@ static void emit_hunk_header(struct emit_callback *ecbdata, const char *reset = diff_get_color(ecbdata->color_diff, DIFF_RESET); static const char atat[2] = { '@', '@' }; const char *cp, *ep; + struct strbuf msgbuf = STRBUF_INIT; + int org_len = len; + int i = 1; /* * As a hunk header must begin with "@@ -<old>, +<new> @@", @@ -370,23 +382,42 @@ static void emit_hunk_header(struct emit_callback *ecbdata, if (len < 10 || memcmp(line, atat, 2) || !(ep = memmem(line + 2, len - 2, atat, 2))) { - emit_line(ecbdata->file, plain, reset, line, len); + emit_line(ecbdata->opt, plain, reset, line, len); return; } ep += 2; /* skip over @@ */ /* The hunk header in fraginfo color */ - emit_line(ecbdata->file, frag, reset, line, ep - line); + strbuf_add(&msgbuf, frag, strlen(frag)); + strbuf_add(&msgbuf, line, ep - line); + strbuf_add(&msgbuf, reset, strlen(reset)); + + /* + * trailing "\r\n" + */ + for ( ; i < 3; i++) + if (line[len - i] == '\r' || line[len - i] == '\n') + len--; /* blank before the func header */ for (cp = ep; ep - line < len; ep++) if (*ep != ' ' && *ep != '\t') break; - if (ep != cp) - emit_line(ecbdata->file, plain, reset, cp, ep - cp); + if (ep != cp) { + strbuf_add(&msgbuf, plain, strlen(plain)); + strbuf_add(&msgbuf, cp, ep - cp); + strbuf_add(&msgbuf, reset, strlen(reset)); + } - if (ep < line + len) - emit_line(ecbdata->file, func, reset, ep, line + len - ep); + if (ep < line + len) { + strbuf_add(&msgbuf, func, strlen(func)); + strbuf_add(&msgbuf, ep, line + len - ep); + strbuf_add(&msgbuf, reset, strlen(reset)); + } + + strbuf_add(&msgbuf, line + len, org_len - len); + emit_line(ecbdata->opt, "", "", msgbuf.buf, msgbuf.len); + strbuf_release(&msgbuf); } static struct diff_tempfile *claim_diff_tempfile(void) { @@ -446,7 +477,7 @@ static void emit_rewrite_lines(struct emit_callback *ecb, len = endp ? (endp - data + 1) : size; if (prefix != '+') { ecb->lno_in_preimage++; - emit_line_0(ecb->file, old, reset, '-', + emit_line_0(ecb->opt, old, reset, '-', data, len); } else { ecb->lno_in_postimage++; @@ -458,7 +489,7 @@ static void emit_rewrite_lines(struct emit_callback *ecb, if (!endp) { const char *plain = diff_get_color(ecb->color_diff, DIFF_PLAIN); - emit_line_0(ecb->file, plain, reset, '\\', + emit_line_0(ecb->opt, plain, reset, '\\', nneof, strlen(nneof)); } } @@ -482,6 +513,13 @@ static void emit_rewrite_diff(const char *name_a, char *data_one, *data_two; size_t size_one, size_two; struct emit_callback ecbdata; + char *line_prefix = ""; + struct strbuf *msgbuf; + + if (o && o->output_prefix) { + msgbuf = o->output_prefix(o, o->output_prefix_data); + line_prefix = msgbuf->buf; + } if (diff_mnemonic_prefix && DIFF_OPT_TST(o, REVERSE_DIFF)) { a_prefix = o->b_prefix; @@ -508,7 +546,7 @@ static void emit_rewrite_diff(const char *name_a, ecbdata.color_diff = color_diff; ecbdata.found_changesp = &o->found_changes; ecbdata.ws_rule = whitespace_rule(name_b ? name_b : name_a); - ecbdata.file = o->file; + ecbdata.opt = o; if (ecbdata.ws_rule & WS_BLANK_AT_EOF) { mmfile_t mf1, mf2; mf1.ptr = (char *)data_one; @@ -523,9 +561,10 @@ static void emit_rewrite_diff(const char *name_a, lc_a = count_lines(data_one, size_one); lc_b = count_lines(data_two, size_two); fprintf(o->file, - "%s--- %s%s%s\n%s+++ %s%s%s\n%s@@ -", - metainfo, a_name.buf, name_a_tab, reset, - metainfo, b_name.buf, name_b_tab, reset, fraginfo); + "%s%s--- %s%s%s\n%s%s+++ %s%s%s\n%s%s@@ -", + line_prefix, metainfo, a_name.buf, name_a_tab, reset, + line_prefix, metainfo, b_name.buf, name_b_tab, reset, + line_prefix, fraginfo); print_line_count(o->file, lc_a); fprintf(o->file, " +"); print_line_count(o->file, lc_b); @@ -584,7 +623,8 @@ struct diff_words_style diff_words_styles[] = { struct diff_words_data { struct diff_words_buffer minus, plus; const char *current_plus; - FILE *file; + int last_minus; + struct diff_options *opt; regex_t *word_regex; enum diff_words_type type; struct diff_words_style *style; @@ -593,10 +633,15 @@ struct diff_words_data { static int fn_out_diff_words_write_helper(FILE *fp, struct diff_words_style_elem *st_el, const char *newline, - size_t count, const char *buf) + size_t count, const char *buf, + const char *line_prefix) { + int print = 0; + while (count) { char *p = memchr(buf, '\n', count); + if (print) + fputs(line_prefix, fp); if (p != buf) { if (st_el->color && fputs(st_el->color, fp) < 0) return -1; @@ -614,21 +659,74 @@ static int fn_out_diff_words_write_helper(FILE *fp, return -1; count -= p + 1 - buf; buf = p + 1; + print = 1; } return 0; } +/* + * '--color-words' algorithm can be described as: + * + * 1. collect a the minus/plus lines of a diff hunk, divided into + * minus-lines and plus-lines; + * + * 2. break both minus-lines and plus-lines into words and + * place them into two mmfile_t with one word for each line; + * + * 3. use xdiff to run diff on the two mmfile_t to get the words level diff; + * + * And for the common parts of the both file, we output the plus side text. + * diff_words->current_plus is used to trace the current position of the plus file + * which printed. diff_words->last_minus is used to trace the last minus word + * printed. + * + * For '--graph' to work with '--color-words', we need to output the graph prefix + * on each line of color words output. Generally, there are two conditions on + * which we should output the prefix. + * + * 1. diff_words->last_minus == 0 && + * diff_words->current_plus == diff_words->plus.text.ptr + * + * that is: the plus text must start as a new line, and if there is no minus + * word printed, a graph prefix must be printed. + * + * 2. diff_words->current_plus > diff_words->plus.text.ptr && + * *(diff_words->current_plus - 1) == '\n' + * + * that is: a graph prefix must be printed following a '\n' + */ +static int color_words_output_graph_prefix(struct diff_words_data *diff_words) +{ + if ((diff_words->last_minus == 0 && + diff_words->current_plus == diff_words->plus.text.ptr) || + (diff_words->current_plus > diff_words->plus.text.ptr && + *(diff_words->current_plus - 1) == '\n')) { + return 1; + } else { + return 0; + } +} + static void fn_out_diff_words_aux(void *priv, char *line, unsigned long len) { struct diff_words_data *diff_words = priv; struct diff_words_style *style = diff_words->style; int minus_first, minus_len, plus_first, plus_len; const char *minus_begin, *minus_end, *plus_begin, *plus_end; + struct diff_options *opt = diff_words->opt; + struct strbuf *msgbuf; + char *line_prefix = ""; if (line[0] != '@' || parse_hunk_header(line, len, &minus_first, &minus_len, &plus_first, &plus_len)) return; + assert(opt); + if (opt->output_prefix) { + msgbuf = opt->output_prefix(opt, opt->output_prefix_data); + line_prefix = msgbuf->buf; + } + /* POSIX requires that first be decremented by one if len == 0... */ if (minus_len) { minus_begin = diff_words->minus.orig[minus_first].begin; @@ -644,21 +742,32 @@ static void fn_out_diff_words_aux(void *priv, char *line, unsigned long len) } else plus_begin = plus_end = diff_words->plus.orig[plus_first].end; - if (diff_words->current_plus != plus_begin) - fn_out_diff_words_write_helper(diff_words->file, + if (color_words_output_graph_prefix(diff_words)) { + fputs(line_prefix, diff_words->opt->file); + } + if (diff_words->current_plus != plus_begin) { + fn_out_diff_words_write_helper(diff_words->opt->file, &style->ctx, style->newline, plus_begin - diff_words->current_plus, - diff_words->current_plus); - if (minus_begin != minus_end) - fn_out_diff_words_write_helper(diff_words->file, + diff_words->current_plus, line_prefix); + if (*(plus_begin - 1) == '\n') + fputs(line_prefix, diff_words->opt->file); + } + if (minus_begin != minus_end) { + fn_out_diff_words_write_helper(diff_words->opt->file, &style->old, style->newline, - minus_end - minus_begin, minus_begin); - if (plus_begin != plus_end) - fn_out_diff_words_write_helper(diff_words->file, + minus_end - minus_begin, minus_begin, + line_prefix); + } + if (plus_begin != plus_end) { + fn_out_diff_words_write_helper(diff_words->opt->file, &style->new, style->newline, - plus_end - plus_begin, plus_begin); + plus_end - plus_begin, plus_begin, + line_prefix); + } diff_words->current_plus = plus_end; + diff_words->last_minus = minus_first; } /* This function starts looking at *begin, and returns 0 iff a word was found. */ @@ -739,22 +848,35 @@ static void diff_words_show(struct diff_words_data *diff_words) mmfile_t minus, plus; struct diff_words_style *style = diff_words->style; + struct diff_options *opt = diff_words->opt; + struct strbuf *msgbuf; + char *line_prefix = ""; + + assert(opt); + if (opt->output_prefix) { + msgbuf = opt->output_prefix(opt, opt->output_prefix_data); + line_prefix = msgbuf->buf; + } + /* special case: only removal */ if (!diff_words->plus.text.size) { - fn_out_diff_words_write_helper(diff_words->file, + fputs(line_prefix, diff_words->opt->file); + fn_out_diff_words_write_helper(diff_words->opt->file, &style->old, style->newline, - diff_words->minus.text.size, diff_words->minus.text.ptr); + diff_words->minus.text.size, + diff_words->minus.text.ptr, line_prefix); diff_words->minus.text.size = 0; return; } diff_words->current_plus = diff_words->plus.text.ptr; + diff_words->last_minus = 0; memset(&xpp, 0, sizeof(xpp)); memset(&xecfg, 0, sizeof(xecfg)); diff_words_fill(&diff_words->minus, &minus, diff_words->word_regex); diff_words_fill(&diff_words->plus, &plus, diff_words->word_regex); - xpp.flags = XDF_NEED_MINIMAL; + xpp.flags = 0; /* as only the hunk header will be parsed, we need a 0-context */ xecfg.ctxlen = 0; xdi_diff_outf(&minus, &plus, fn_out_diff_words_aux, diff_words, @@ -762,11 +884,15 @@ static void diff_words_show(struct diff_words_data *diff_words) free(minus.ptr); free(plus.ptr); if (diff_words->current_plus != diff_words->plus.text.ptr + - diff_words->plus.text.size) - fn_out_diff_words_write_helper(diff_words->file, + diff_words->plus.text.size) { + if (color_words_output_graph_prefix(diff_words)) + fputs(line_prefix, diff_words->opt->file); + fn_out_diff_words_write_helper(diff_words->opt->file, &style->ctx, style->newline, diff_words->plus.text.ptr + diff_words->plus.text.size - - diff_words->current_plus, diff_words->current_plus); + - diff_words->current_plus, diff_words->current_plus, + line_prefix); + } diff_words->minus.text.size = diff_words->plus.text.size = 0; } @@ -838,9 +964,17 @@ static void fn_out_consume(void *priv, char *line, unsigned long len) const char *meta = diff_get_color(ecbdata->color_diff, DIFF_METAINFO); const char *plain = diff_get_color(ecbdata->color_diff, DIFF_PLAIN); const char *reset = diff_get_color(ecbdata->color_diff, DIFF_RESET); + struct diff_options *o = ecbdata->opt; + char *line_prefix = ""; + struct strbuf *msgbuf; + + if (o && o->output_prefix) { + msgbuf = o->output_prefix(o, o->output_prefix_data); + line_prefix = msgbuf->buf; + } if (ecbdata->header) { - fprintf(ecbdata->file, "%s", ecbdata->header->buf); + fprintf(ecbdata->opt->file, "%s", ecbdata->header->buf); strbuf_reset(ecbdata->header); ecbdata->header = NULL; } @@ -852,10 +986,10 @@ static void fn_out_consume(void *priv, char *line, unsigned long len) name_a_tab = strchr(ecbdata->label_path[0], ' ') ? "\t" : ""; name_b_tab = strchr(ecbdata->label_path[1], ' ') ? "\t" : ""; - fprintf(ecbdata->file, "%s--- %s%s%s\n", - meta, ecbdata->label_path[0], reset, name_a_tab); - fprintf(ecbdata->file, "%s+++ %s%s%s\n", - meta, ecbdata->label_path[1], reset, name_b_tab); + fprintf(ecbdata->opt->file, "%s%s--- %s%s%s\n", + line_prefix, meta, ecbdata->label_path[0], reset, name_a_tab); + fprintf(ecbdata->opt->file, "%s%s+++ %s%s%s\n", + line_prefix, meta, ecbdata->label_path[1], reset, name_b_tab); ecbdata->label_path[0] = ecbdata->label_path[1] = NULL; } @@ -872,15 +1006,15 @@ static void fn_out_consume(void *priv, char *line, unsigned long len) find_lno(line, ecbdata); emit_hunk_header(ecbdata, line, len); if (line[len-1] != '\n') - putc('\n', ecbdata->file); + putc('\n', ecbdata->opt->file); return; } if (len < 1) { - emit_line(ecbdata->file, reset, reset, line, len); + emit_line(ecbdata->opt, reset, reset, line, len); if (ecbdata->diff_words && ecbdata->diff_words->type == DIFF_WORDS_PORCELAIN) - fputs("~\n", ecbdata->file); + fputs("~\n", ecbdata->opt->file); return; } @@ -896,11 +1030,11 @@ static void fn_out_consume(void *priv, char *line, unsigned long len) } diff_words_flush(ecbdata); if (ecbdata->diff_words->type == DIFF_WORDS_PORCELAIN) { - emit_line(ecbdata->file, plain, reset, line, len); - fputs("~\n", ecbdata->file); + emit_line(ecbdata->opt, plain, reset, line, len); + fputs("~\n", ecbdata->opt->file); } else { /* don't print the prefix character */ - emit_line(ecbdata->file, plain, reset, line+1, len-1); + emit_line(ecbdata->opt, plain, reset, line+1, len-1); } return; } @@ -912,7 +1046,7 @@ static void fn_out_consume(void *priv, char *line, unsigned long len) ecbdata->lno_in_preimage++; if (line[0] == ' ') ecbdata->lno_in_postimage++; - emit_line(ecbdata->file, color, reset, line, len); + emit_line(ecbdata->opt, color, reset, line, len); } else { ecbdata->lno_in_postimage++; emit_add_line(reset, ecbdata, line + 1, len - 1); @@ -1092,10 +1226,17 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options) int total_files = data->nr; int width, name_width; const char *reset, *set, *add_c, *del_c; + const char *line_prefix = ""; + struct strbuf *msg = NULL; if (data->nr == 0) return; + if (options->output_prefix) { + msg = options->output_prefix(options, options->output_prefix_data); + line_prefix = msg->buf; + } + width = options->stat_width ? options->stat_width : 80; name_width = options->stat_name_width ? options->stat_name_width : 50; @@ -1165,6 +1306,7 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options) } if (data->files[i]->is_binary) { + fprintf(options->file, "%s", line_prefix); show_name(options->file, prefix, name, len); fprintf(options->file, " Bin "); fprintf(options->file, "%s%"PRIuMAX"%s", @@ -1177,6 +1319,7 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options) continue; } else if (data->files[i]->is_unmerged) { + fprintf(options->file, "%s", line_prefix); show_name(options->file, prefix, name, len); fprintf(options->file, " Unmerged\n"); continue; @@ -1199,6 +1342,7 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options) add = scale_linear(add, width, max_change); del = scale_linear(del, width, max_change); } + fprintf(options->file, "%s", line_prefix); show_name(options->file, prefix, name, len); fprintf(options->file, "%5"PRIuMAX"%s", added + deleted, added + deleted ? " " : ""); @@ -1206,6 +1350,7 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options) show_graph(options->file, '-', del, del_c, reset); fprintf(options->file, "\n"); } + fprintf(options->file, "%s", line_prefix); fprintf(options->file, " %d files changed, %d insertions(+), %d deletions(-)\n", total_files, adds, dels); @@ -1232,6 +1377,12 @@ static void show_shortstats(struct diffstat_t *data, struct diff_options *option } } } + if (options->output_prefix) { + struct strbuf *msg = NULL; + msg = options->output_prefix(options, + options->output_prefix_data); + fprintf(options->file, "%s", msg->buf); + } fprintf(options->file, " %d files changed, %d insertions(+), %d deletions(-)\n", total_files, adds, dels); } @@ -1246,6 +1397,13 @@ static void show_numstat(struct diffstat_t *data, struct diff_options *options) for (i = 0; i < data->nr; i++) { struct diffstat_file *file = data->files[i]; + if (options->output_prefix) { + struct strbuf *msg = NULL; + msg = options->output_prefix(options, + options->output_prefix_data); + fprintf(options->file, "%s", msg->buf); + } + if (file->is_binary) fprintf(options->file, "-\t-\t"); else @@ -1281,10 +1439,18 @@ struct dirstat_dir { int alloc, nr, percent, cumulative; }; -static long gather_dirstat(FILE *file, struct dirstat_dir *dir, unsigned long changed, const char *base, int baselen) +static long gather_dirstat(struct diff_options *opt, struct dirstat_dir *dir, + unsigned long changed, const char *base, int baselen) { unsigned long this_dir = 0; unsigned int sources = 0; + const char *line_prefix = ""; + struct strbuf *msg = NULL; + + if (opt->output_prefix) { + msg = opt->output_prefix(opt, opt->output_prefix_data); + line_prefix = msg->buf; + } while (dir->nr) { struct dirstat_file *f = dir->files; @@ -1299,7 +1465,7 @@ static long gather_dirstat(FILE *file, struct dirstat_dir *dir, unsigned long ch slash = strchr(f->name + baselen, '/'); if (slash) { int newbaselen = slash + 1 - f->name; - this = gather_dirstat(file, dir, changed, f->name, newbaselen); + this = gather_dirstat(opt, dir, changed, f->name, newbaselen); sources++; } else { this = f->changed; @@ -1321,7 +1487,8 @@ static long gather_dirstat(FILE *file, struct dirstat_dir *dir, unsigned long ch if (permille) { int percent = permille / 10; if (percent >= dir->percent) { - fprintf(file, "%4d.%01d%% %.*s\n", percent, permille % 10, baselen, base); + fprintf(opt->file, "%s%4d.%01d%% %.*s\n", line_prefix, + percent, permille % 10, baselen, base); if (!dir->cumulative) return 0; } @@ -1401,7 +1568,7 @@ static void show_dirstat(struct diff_options *options) /* Show all directories with more than x% of the changes */ qsort(dir.files, dir.nr, sizeof(dir.files[0]), dirstat_compare); - gather_dirstat(options->file, &dir, changed, "", 0); + gather_dirstat(options, &dir, changed, "", 0); } static void free_diffstat_info(struct diffstat_t *diffstat) @@ -1459,6 +1626,15 @@ static void checkdiff_consume(void *priv, char *line, unsigned long len) const char *reset = diff_get_color(color_diff, DIFF_RESET); const char *set = diff_get_color(color_diff, DIFF_FILE_NEW); char *err; + char *line_prefix = ""; + struct strbuf *msgbuf; + + assert(data->o); + if (data->o->output_prefix) { + msgbuf = data->o->output_prefix(data->o, + data->o->output_prefix_data); + line_prefix = msgbuf->buf; + } if (line[0] == '+') { unsigned bad; @@ -1466,18 +1642,18 @@ static void checkdiff_consume(void *priv, char *line, unsigned long len) if (is_conflict_marker(line + 1, marker_size, len - 1)) { data->status |= 1; fprintf(data->o->file, - "%s:%d: leftover conflict marker\n", - data->filename, data->lineno); + "%s%s:%d: leftover conflict marker\n", + line_prefix, data->filename, data->lineno); } bad = ws_check(line + 1, len - 1, data->ws_rule); if (!bad) return; data->status |= bad; err = whitespace_error_string(bad); - fprintf(data->o->file, "%s:%d: %s.\n", - data->filename, data->lineno, err); + fprintf(data->o->file, "%s%s:%d: %s.\n", + line_prefix, data->filename, data->lineno, err); free(err); - emit_line(data->o->file, set, reset, line, 1); + emit_line(data->o, set, reset, line, 1); ws_check_emit(line + 1, len - 1, data->ws_rule, data->o->file, set, reset, ws); } else if (line[0] == ' ') { @@ -1515,7 +1691,7 @@ static unsigned char *deflate_it(char *data, return deflated; } -static void emit_binary_diff_body(FILE *file, mmfile_t *one, mmfile_t *two) +static void emit_binary_diff_body(FILE *file, mmfile_t *one, mmfile_t *two, char *prefix) { void *cp; void *delta; @@ -1544,13 +1720,13 @@ static void emit_binary_diff_body(FILE *file, mmfile_t *one, mmfile_t *two) } if (delta && delta_size < deflate_size) { - fprintf(file, "delta %lu\n", orig_size); + fprintf(file, "%sdelta %lu\n", prefix, orig_size); free(deflated); data = delta; data_size = delta_size; } else { - fprintf(file, "literal %lu\n", two->size); + fprintf(file, "%sliteral %lu\n", prefix, two->size); free(delta); data = deflated; data_size = deflate_size; @@ -1568,18 +1744,19 @@ static void emit_binary_diff_body(FILE *file, mmfile_t *one, mmfile_t *two) line[0] = bytes - 26 + 'a' - 1; encode_85(line + 1, cp, bytes); cp = (char *) cp + bytes; + fprintf(file, "%s", prefix); fputs(line, file); fputc('\n', file); } - fprintf(file, "\n"); + fprintf(file, "%s\n", prefix); free(data); } -static void emit_binary_diff(FILE *file, mmfile_t *one, mmfile_t *two) +static void emit_binary_diff(FILE *file, mmfile_t *one, mmfile_t *two, char *prefix) { - fprintf(file, "GIT binary patch\n"); - emit_binary_diff_body(file, one, two); - emit_binary_diff_body(file, two, one); + fprintf(file, "%sGIT binary patch\n", prefix); + emit_binary_diff_body(file, one, two, prefix); + emit_binary_diff_body(file, two, one, prefix); } static void diff_filespec_load_driver(struct diff_filespec *one) @@ -1629,7 +1806,7 @@ void diff_set_mnemonic_prefix(struct diff_options *options, const char *a, const options->b_prefix = b; } -static struct userdiff_driver *get_textconv(struct diff_filespec *one) +struct userdiff_driver *get_textconv(struct diff_filespec *one) { if (!DIFF_FILE_VALID(one)) return NULL; @@ -1656,6 +1833,7 @@ static void builtin_diff(const char *name_a, struct diff_filespec *one, struct diff_filespec *two, const char *xfrm_msg, + int must_show_header, struct diff_options *o, int complete_rewrite) { @@ -1668,6 +1846,13 @@ static void builtin_diff(const char *name_a, struct userdiff_driver *textconv_one = NULL; struct userdiff_driver *textconv_two = NULL; struct strbuf header = STRBUF_INIT; + struct strbuf *msgbuf; + char *line_prefix = ""; + + if (o->output_prefix) { + msgbuf = o->output_prefix(o, o->output_prefix_data); + line_prefix = msgbuf->buf; + } if (DIFF_OPT_TST(o, SUBMODULE_LOG) && (!one->mode || S_ISGITLINK(one->mode)) && @@ -1702,25 +1887,28 @@ static void builtin_diff(const char *name_a, b_two = quote_two(b_prefix, name_b + (*name_b == '/')); lbl[0] = DIFF_FILE_VALID(one) ? a_one : "/dev/null"; lbl[1] = DIFF_FILE_VALID(two) ? b_two : "/dev/null"; - strbuf_addf(&header, "%sdiff --git %s %s%s\n", set, a_one, b_two, reset); + strbuf_addf(&header, "%s%sdiff --git %s %s%s\n", line_prefix, set, a_one, b_two, reset); if (lbl[0][0] == '/') { /* /dev/null */ - strbuf_addf(&header, "%snew file mode %06o%s\n", set, two->mode, reset); - if (xfrm_msg && xfrm_msg[0]) - strbuf_addf(&header, "%s%s%s\n", set, xfrm_msg, reset); + strbuf_addf(&header, "%s%snew file mode %06o%s\n", line_prefix, set, two->mode, reset); + if (xfrm_msg) + strbuf_addstr(&header, xfrm_msg); + must_show_header = 1; } else if (lbl[1][0] == '/') { - strbuf_addf(&header, "%sdeleted file mode %06o%s\n", set, one->mode, reset); - if (xfrm_msg && xfrm_msg[0]) - strbuf_addf(&header, "%s%s%s\n", set, xfrm_msg, reset); + strbuf_addf(&header, "%s%sdeleted file mode %06o%s\n", line_prefix, set, one->mode, reset); + if (xfrm_msg) + strbuf_addstr(&header, xfrm_msg); + must_show_header = 1; } else { if (one->mode != two->mode) { - strbuf_addf(&header, "%sold mode %06o%s\n", set, one->mode, reset); - strbuf_addf(&header, "%snew mode %06o%s\n", set, two->mode, reset); + strbuf_addf(&header, "%s%sold mode %06o%s\n", line_prefix, set, one->mode, reset); + strbuf_addf(&header, "%s%snew mode %06o%s\n", line_prefix, set, two->mode, reset); + must_show_header = 1; } - if (xfrm_msg && xfrm_msg[0]) - strbuf_addf(&header, "%s%s%s\n", set, xfrm_msg, reset); + if (xfrm_msg) + strbuf_addstr(&header, xfrm_msg); /* * we do not run diff between different kind @@ -1747,15 +1935,18 @@ static void builtin_diff(const char *name_a, die("unable to read files to diff"); /* Quite common confusing case */ if (mf1.size == mf2.size && - !memcmp(mf1.ptr, mf2.ptr, mf1.size)) + !memcmp(mf1.ptr, mf2.ptr, mf1.size)) { + if (must_show_header) + fprintf(o->file, "%s", header.buf); goto free_ab_and_return; + } fprintf(o->file, "%s", header.buf); strbuf_reset(&header); if (DIFF_OPT_TST(o, BINARY)) - emit_binary_diff(o->file, &mf1, &mf2); + emit_binary_diff(o->file, &mf1, &mf2, line_prefix); else - fprintf(o->file, "Binary files %s and %s differ\n", - lbl[0], lbl[1]); + fprintf(o->file, "%sBinary files %s and %s differ\n", + line_prefix, lbl[0], lbl[1]); o->found_changes = 1; } else { @@ -1766,7 +1957,7 @@ static void builtin_diff(const char *name_a, struct emit_callback ecbdata; const struct userdiff_funcname *pe; - if (!DIFF_XDL_TST(o, WHITESPACE_FLAGS)) { + if (!DIFF_XDL_TST(o, WHITESPACE_FLAGS) || must_show_header) { fprintf(o->file, "%s", header.buf); strbuf_reset(&header); } @@ -1787,9 +1978,9 @@ static void builtin_diff(const char *name_a, ecbdata.ws_rule = whitespace_rule(name_b ? name_b : name_a); if (ecbdata.ws_rule & WS_BLANK_AT_EOF) check_blank_at_eof(&mf1, &mf2, &ecbdata); - ecbdata.file = o->file; + ecbdata.opt = o; ecbdata.header = header.len ? &header : NULL; - xpp.flags = XDF_NEED_MINIMAL | o->xdl_opts; + xpp.flags = o->xdl_opts; xecfg.ctxlen = o->context; xecfg.interhunkctxlen = o->interhunkcontext; xecfg.flags = XDL_EMIT_FUNCNAMES; @@ -1806,8 +1997,8 @@ static void builtin_diff(const char *name_a, ecbdata.diff_words = xcalloc(1, sizeof(struct diff_words_data)); - ecbdata.diff_words->file = o->file; ecbdata.diff_words->type = o->word_diff; + ecbdata.diff_words->opt = o; if (!o->word_regex) o->word_regex = userdiff_word_regex(one); if (!o->word_regex) @@ -1894,7 +2085,7 @@ static void builtin_diffstat(const char *name_a, const char *name_b, memset(&xpp, 0, sizeof(xpp)); memset(&xecfg, 0, sizeof(xecfg)); - xpp.flags = XDF_NEED_MINIMAL | o->xdl_opts; + xpp.flags = o->xdl_opts; xdi_diff_outf(&mf1, &mf2, diffstat_consume, diffstat, &xpp, &xecfg); } @@ -1942,7 +2133,7 @@ static void builtin_checkdiff(const char *name_a, const char *name_b, memset(&xpp, 0, sizeof(xpp)); memset(&xecfg, 0, sizeof(xecfg)); xecfg.ctxlen = 1; /* at least one context line */ - xpp.flags = XDF_NEED_MINIMAL; + xpp.flags = 0; xdi_diff_outf(&mf1, &mf2, checkdiff_consume, &data, &xpp, &xecfg); @@ -2379,36 +2570,53 @@ static void fill_metainfo(struct strbuf *msg, struct diff_filespec *one, struct diff_filespec *two, struct diff_options *o, - struct diff_filepair *p) + struct diff_filepair *p, + int *must_show_header, + int use_color) { + const char *set = diff_get_color(use_color, DIFF_METAINFO); + const char *reset = diff_get_color(use_color, DIFF_RESET); + struct strbuf *msgbuf; + char *line_prefix = ""; + + *must_show_header = 1; + if (o->output_prefix) { + msgbuf = o->output_prefix(o, o->output_prefix_data); + line_prefix = msgbuf->buf; + } strbuf_init(msg, PATH_MAX * 2 + 300); switch (p->status) { case DIFF_STATUS_COPIED: - strbuf_addf(msg, "similarity index %d%%", similarity_index(p)); - strbuf_addstr(msg, "\ncopy from "); + strbuf_addf(msg, "%s%ssimilarity index %d%%", + line_prefix, set, similarity_index(p)); + strbuf_addf(msg, "%s\n%s%scopy from ", + reset, line_prefix, set); quote_c_style(name, msg, NULL, 0); - strbuf_addstr(msg, "\ncopy to "); + strbuf_addf(msg, "%s\n%s%scopy to ", reset, line_prefix, set); quote_c_style(other, msg, NULL, 0); - strbuf_addch(msg, '\n'); + strbuf_addf(msg, "%s\n", reset); break; case DIFF_STATUS_RENAMED: - strbuf_addf(msg, "similarity index %d%%", similarity_index(p)); - strbuf_addstr(msg, "\nrename from "); + strbuf_addf(msg, "%s%ssimilarity index %d%%", + line_prefix, set, similarity_index(p)); + strbuf_addf(msg, "%s\n%s%srename from ", + reset, line_prefix, set); quote_c_style(name, msg, NULL, 0); - strbuf_addstr(msg, "\nrename to "); + strbuf_addf(msg, "%s\n%s%srename to ", + reset, line_prefix, set); quote_c_style(other, msg, NULL, 0); - strbuf_addch(msg, '\n'); + strbuf_addf(msg, "%s\n", reset); break; case DIFF_STATUS_MODIFIED: if (p->score) { - strbuf_addf(msg, "dissimilarity index %d%%\n", - similarity_index(p)); + strbuf_addf(msg, "%s%sdissimilarity index %d%%%s\n", + line_prefix, + set, similarity_index(p), reset); break; } /* fallthru */ default: - /* nothing */ - ; + *must_show_header = 0; } if (one && two && hashcmp(one->sha1, two->sha1)) { int abbrev = DIFF_OPT_TST(o, FULL_INDEX) ? 40 : DEFAULT_ABBREV; @@ -2419,15 +2627,14 @@ static void fill_metainfo(struct strbuf *msg, (!fill_mmfile(&mf, two) && diff_filespec_is_binary(two))) abbrev = 40; } - strbuf_addf(msg, "index %.*s..%.*s", - abbrev, sha1_to_hex(one->sha1), - abbrev, sha1_to_hex(two->sha1)); + strbuf_addf(msg, "%s%sindex %s..", set, + line_prefix, + find_unique_abbrev(one->sha1, abbrev)); + strbuf_addstr(msg, find_unique_abbrev(two->sha1, abbrev)); if (one->mode == two->mode) strbuf_addf(msg, " %06o", one->mode); - strbuf_addch(msg, '\n'); + strbuf_addf(msg, "%s\n", reset); } - if (msg->len) - strbuf_setlen(msg, msg->len - 1); } static void run_diff_cmd(const char *pgm, @@ -2442,11 +2649,7 @@ static void run_diff_cmd(const char *pgm, { const char *xfrm_msg = NULL; int complete_rewrite = (p->status == DIFF_STATUS_MODIFIED) && p->score; - - if (msg) { - fill_metainfo(msg, name, other, one, two, o, p); - xfrm_msg = msg->len ? msg->buf : NULL; - } + int must_show_header = 0; if (!DIFF_OPT_TST(o, ALLOW_EXTERNAL)) pgm = NULL; @@ -2456,6 +2659,17 @@ static void run_diff_cmd(const char *pgm, pgm = drv->external; } + if (msg) { + /* + * don't use colors when the header is intended for an + * external diff driver + */ + fill_metainfo(msg, name, other, one, two, o, p, + &must_show_header, + DIFF_OPT_TST(o, COLOR_DIFF) && !pgm); + xfrm_msg = msg->len ? msg->buf : NULL; + } + if (pgm) { run_external_diff(pgm, name, other, one, two, xfrm_msg, complete_rewrite); @@ -2463,7 +2677,8 @@ static void run_diff_cmd(const char *pgm, } if (one && two) builtin_diff(name, other ? other : name, - one, two, xfrm_msg, o, complete_rewrite); + one, two, xfrm_msg, must_show_header, + o, complete_rewrite); else fprintf(o->file, "* Unmerged path %s\n", name); } @@ -2616,7 +2831,9 @@ void diff_setup(struct diff_options *options) DIFF_OPT_SET(options, COLOR_DIFF); options->detect_rename = diff_detect_rename_default; - if (!diff_mnemonic_prefix) { + if (diff_no_prefix) { + options->a_prefix = options->b_prefix = ""; + } else if (!diff_mnemonic_prefix) { options->a_prefix = "a/"; options->b_prefix = "b/"; } @@ -2951,7 +3168,9 @@ int diff_opt_parse(struct diff_options *options, const char **av, int ac) else if (!strcmp(arg, "--no-textconv")) DIFF_OPT_CLR(options, ALLOW_TEXTCONV); else if (!strcmp(arg, "--ignore-submodules")) - DIFF_OPT_SET(options, IGNORE_SUBMODULES); + handle_ignore_submodules_arg(options, "all"); + else if (!prefixcmp(arg, "--ignore-submodules=")) + handle_ignore_submodules_arg(options, arg + 20); else if (!strcmp(arg, "--submodule")) DIFF_OPT_SET(options, SUBMODULE_LOG); else if (!prefixcmp(arg, "--submodule=")) { @@ -3124,6 +3343,11 @@ static void diff_flush_raw(struct diff_filepair *p, struct diff_options *opt) { int line_termination = opt->line_termination; int inter_name_termination = line_termination ? '\t' : '\0'; + if (opt->output_prefix) { + struct strbuf *msg = NULL; + msg = opt->output_prefix(opt, opt->output_prefix_data); + fprintf(opt->file, "%s", msg->buf); + } if (!(opt->output_format & DIFF_FORMAT_NAME_STATUS)) { fprintf(opt->file, ":%06o %06o %s ", p->one->mode, p->two->mode, @@ -3369,48 +3593,62 @@ static void show_file_mode_name(FILE *file, const char *newdelete, struct diff_f } -static void show_mode_change(FILE *file, struct diff_filepair *p, int show_name) +static void show_mode_change(FILE *file, struct diff_filepair *p, int show_name, + const char *line_prefix) { if (p->one->mode && p->two->mode && p->one->mode != p->two->mode) { - fprintf(file, " mode change %06o => %06o%c", p->one->mode, p->two->mode, - show_name ? ' ' : '\n'); + fprintf(file, "%s mode change %06o => %06o%c", line_prefix, p->one->mode, + p->two->mode, show_name ? ' ' : '\n'); if (show_name) { write_name_quoted(p->two->path, file, '\n'); } } } -static void show_rename_copy(FILE *file, const char *renamecopy, struct diff_filepair *p) +static void show_rename_copy(FILE *file, const char *renamecopy, struct diff_filepair *p, + const char *line_prefix) { char *names = pprint_rename(p->one->path, p->two->path); fprintf(file, " %s %s (%d%%)\n", renamecopy, names, similarity_index(p)); free(names); - show_mode_change(file, p, 0); + show_mode_change(file, p, 0, line_prefix); } -static void diff_summary(FILE *file, struct diff_filepair *p) +static void diff_summary(struct diff_options *opt, struct diff_filepair *p) { + FILE *file = opt->file; + char *line_prefix = ""; + + if (opt->output_prefix) { + struct strbuf *buf = opt->output_prefix(opt, opt->output_prefix_data); + line_prefix = buf->buf; + } + switch(p->status) { case DIFF_STATUS_DELETED: + fputs(line_prefix, file); show_file_mode_name(file, "delete", p->one); break; case DIFF_STATUS_ADDED: + fputs(line_prefix, file); show_file_mode_name(file, "create", p->two); break; case DIFF_STATUS_COPIED: - show_rename_copy(file, "copy", p); + fputs(line_prefix, file); + show_rename_copy(file, "copy", p, line_prefix); break; case DIFF_STATUS_RENAMED: - show_rename_copy(file, "rename", p); + fputs(line_prefix, file); + show_rename_copy(file, "rename", p, line_prefix); break; default: if (p->score) { - fputs(" rewrite ", file); + fprintf(file, "%s rewrite ", line_prefix); write_name_quoted(p->two->path, file, ' '); fprintf(file, "(%d%%)\n", similarity_index(p)); } - show_mode_change(file, p, !p->score); + show_mode_change(file, p, !p->score, line_prefix); break; } } @@ -3521,7 +3759,7 @@ static int diff_get_patch_id(struct diff_options *options, unsigned char *sha1) len2, p->two->path); git_SHA1_Update(&ctx, buffer, len1); - xpp.flags = XDF_NEED_MINIMAL; + xpp.flags = 0; xecfg.ctxlen = 3; xecfg.flags = XDL_EMIT_FUNCNAMES; xdi_diff_outf(&mf1, &mf2, patch_id_consume, &data, @@ -3619,8 +3857,9 @@ void diff_flush(struct diff_options *options) show_dirstat(options); if (output_format & DIFF_FORMAT_SUMMARY && !is_summary_empty(q)) { - for (i = 0; i < q->nr; i++) - diff_summary(options->file, q->queue[i]); + for (i = 0; i < q->nr; i++) { + diff_summary(options, q->queue[i]); + } separator++; } @@ -4002,9 +4241,9 @@ static char *run_textconv(const char *pgm, struct diff_filespec *spec, return strbuf_detach(&buf, outsize); } -static size_t fill_textconv(struct userdiff_driver *driver, - struct diff_filespec *df, - char **outbuf) +size_t fill_textconv(struct userdiff_driver *driver, + struct diff_filespec *df, + char **outbuf) { size_t size; @@ -9,6 +9,9 @@ struct rev_info; struct diff_options; struct diff_queue_struct; +struct strbuf; +struct diff_filespec; +struct userdiff_driver; typedef void (*change_fn_t)(struct diff_options *options, unsigned old_mode, unsigned new_mode, @@ -25,6 +28,8 @@ typedef void (*add_remove_fn_t)(struct diff_options *options, typedef void (*diff_format_fn_t)(struct diff_queue_struct *q, struct diff_options *options, void *data); +typedef struct strbuf *(*diff_prefix_fn_t)(struct diff_options *opt, void *data); + #define DIFF_FORMAT_RAW 0x0001 #define DIFF_FORMAT_DIFFSTAT 0x0002 #define DIFF_FORMAT_NUMSTAT 0x0004 @@ -71,6 +76,7 @@ typedef void (*diff_format_fn_t)(struct diff_queue_struct *q, #define DIFF_OPT_SUBMODULE_LOG (1 << 23) #define DIFF_OPT_DIRTY_SUBMODULES (1 << 24) #define DIFF_OPT_IGNORE_UNTRACKED_IN_SUBMODULES (1 << 25) +#define DIFF_OPT_IGNORE_DIRTY_SUBMODULES (1 << 26) #define DIFF_OPT_TST(opts, flag) ((opts)->flags & DIFF_OPT_##flag) #define DIFF_OPT_SET(opts, flag) ((opts)->flags |= DIFF_OPT_##flag) @@ -130,6 +136,8 @@ struct diff_options { add_remove_fn_t add_remove; diff_format_fn_t format_callback; void *format_callback_data; + diff_prefix_fn_t output_prefix; + void *output_prefix_data; }; enum color_diff { @@ -141,7 +149,7 @@ enum color_diff { DIFF_FILE_NEW = 5, DIFF_COMMIT = 6, DIFF_WHITESPACE = 7, - DIFF_FUNCINFO = 8, + DIFF_FUNCINFO = 8 }; const char *diff_get_color(int diff_use_color, enum color_diff ix); #define diff_get_color_opt(o, ix) \ @@ -287,4 +295,10 @@ extern void diff_no_index(struct rev_info *, int, const char **, int, const char extern int index_differs_from(const char *def, int diff_flags); +extern size_t fill_textconv(struct userdiff_driver *driver, + struct diff_filespec *df, + char **outbuf); + +extern struct userdiff_driver *get_textconv(struct diff_filespec *one); + #endif /* DIFF_H */ @@ -31,22 +31,22 @@ static int common_prefix(const char **pathspec) if (!slash) return 0; + /* + * The first 'prefix' characters of 'path' are common leading + * path components among the pathspecs we have seen so far, + * including the trailing slash. + */ prefix = slash - path + 1; while ((next = *++pathspec) != NULL) { - int len = strlen(next); - if (len >= prefix && !memcmp(path, next, prefix)) + int len, last_matching_slash = -1; + for (len = 0; len < prefix && next[len] == path[len]; len++) + if (next[len] == '/') + last_matching_slash = len; + if (len == prefix) continue; - len = prefix - 1; - for (;;) { - if (!len) - return 0; - if (next[--len] != '/') - continue; - if (memcmp(path, next, len+1)) - continue; - prefix = len + 1; - break; - } + if (last_matching_slash < 0) + return 0; + prefix = last_matching_slash + 1; } return prefix; } @@ -465,7 +465,7 @@ static struct dir_entry *dir_add_ignored(struct dir_struct *dir, const char *pat enum exist_status { index_nonexistent = 0, index_directory, - index_gitdir, + index_gitdir }; /* @@ -533,7 +533,7 @@ static enum exist_status directory_exists_in_index(const char *dirname, int len) enum directory_treatment { show_directory, ignore_directory, - recurse_into_directory, + recurse_into_directory }; static enum directory_treatment treat_directory(struct dir_struct *dir, @@ -684,7 +684,7 @@ static int get_dtype(struct dirent *de, const char *path, int len) enum path_treatment { path_ignored, path_handled, - path_recurse, + path_recurse }; static enum path_treatment treat_one_path(struct dir_struct *dir, diff --git a/environment.c b/environment.c index 876c5e5341..83d38d3c23 100644 --- a/environment.c +++ b/environment.c @@ -38,8 +38,9 @@ const char *pager_program; int pager_use_color = 1; const char *editor_program; const char *excludes_file; -int auto_crlf = 0; /* 1: both ways, -1: only when adding git objects */ +enum auto_crlf auto_crlf = AUTO_CRLF_FALSE; int read_replace_refs = 1; +enum eol eol = EOL_UNSET; enum safe_crlf safe_crlf = SAFE_CRLF_WARN; unsigned whitespace_rule_cfg = WS_DEFAULT_RULE; enum branch_track git_branch_track = BRANCH_TRACK_REMOTE; diff --git a/fast-import.c b/fast-import.c index 129a786832..1e5d66ed0a 100644 --- a/fast-import.c +++ b/fast-import.c @@ -267,7 +267,7 @@ struct hash_list typedef enum { WHENSPEC_RAW = 1, WHENSPEC_RFC2822, - WHENSPEC_NOW, + WHENSPEC_NOW } whenspec_type; struct recent_command @@ -311,8 +311,6 @@ static int fsck_commit(struct commit *commit, fsck_error error_func) err = fsck_ident(&buffer, &commit->object, error_func); if (err) return err; - if (*buffer != '\n') - return error_func(&commit->object, FSCK_ERROR, "invalid format - expected blank line"); if (!commit->tree) return error_func(&commit->object, FSCK_ERROR, "could not load commit's tree %s", sha1_to_hex(tree_sha1)); diff --git a/git-add--interactive.perl b/git-add--interactive.perl index 21f1330a5b..27fc79347a 100755 --- a/git-add--interactive.perl +++ b/git-add--interactive.perl @@ -1111,9 +1111,9 @@ sub help_patch_cmd { print colored $help_color, <<EOF ; y - $verb this hunk$target n - do not $verb this hunk$target -q - quit, do not $verb this hunk nor any of the remaining ones -a - $verb this and all the remaining hunks in the file -d - do not $verb this hunk nor any of the remaining hunks in the file +q - quit; do not $verb this hunk nor any of the remaining ones +a - $verb this hunk and all later hunks in the file +d - do not $verb this hunk nor any of the later hunks in the file g - select a hunk to go to / - search for a hunk matching the given regex j - leave this hunk undecided, see next undecided hunk @@ -52,6 +52,16 @@ else HAS_HEAD= fi +cmdline="git am" +if test '' != "$interactive" +then + cmdline="$cmdline -i" +fi +if test '' != "$threeway" +then + cmdline="$cmdline -3" +fi + sq () { git rev-parse --sq-quote "$@" } @@ -66,15 +76,6 @@ stop_here_user_resolve () { printf '%s\n' "$resolvemsg" stop_here $1 fi - cmdline="git am" - if test '' != "$interactive" - then - cmdline="$cmdline -i" - fi - if test '' != "$threeway" - then - cmdline="$cmdline -3" - fi echo "When you have resolved this problem run \"$cmdline --resolved\"." echo "If you would prefer to skip this patch, instead run \"$cmdline --skip\"." echo "To restore the original branch and stop patching run \"$cmdline --abort\"." @@ -591,9 +592,11 @@ do test -s "$dotest/patch" || { echo "Patch is empty. Was it split wrong?" + echo "If you would prefer to skip this patch, instead run \"$cmdline --skip\"." + echo "To restore the original branch and stop patching run \"$cmdline --abort\"." stop_here $this } - rm -f "$dotest/original-commit" + rm -f "$dotest/original-commit" "$dotest/author-script" if test -f "$dotest/rebasing" && commit=$(sed -e 's/^From \([0-9a-f]*\) .*/\1/' \ -e q "$dotest/$msgnum") && @@ -602,6 +605,7 @@ do git cat-file commit "$commit" | sed -e '1,/^$/d' >"$dotest/msg-clean" echo "$commit" > "$dotest/original-commit" + get_author_ident_from_commit "$commit" > "$dotest/author-script" else { sed -n '/^Subject/ s/Subject: //p' "$dotest/info" @@ -613,9 +617,14 @@ do ;; esac - GIT_AUTHOR_NAME="$(sed -n '/^Author/ s/Author: //p' "$dotest/info")" - GIT_AUTHOR_EMAIL="$(sed -n '/^Email/ s/Email: //p' "$dotest/info")" - GIT_AUTHOR_DATE="$(sed -n '/^Date/ s/Date: //p' "$dotest/info")" + if test -f "$dotest/author-script" + then + eval $(cat "$dotest/author-script") + else + GIT_AUTHOR_NAME="$(sed -n '/^Author/ s/Author: //p' "$dotest/info")" + GIT_AUTHOR_EMAIL="$(sed -n '/^Email/ s/Email: //p' "$dotest/info")" + GIT_AUTHOR_DATE="$(sed -n '/^Date/ s/Date: //p' "$dotest/info")" + fi if test -z "$GIT_AUTHOR_EMAIL" then @@ -690,7 +699,13 @@ do else action=yes fi - FIRSTLINE=$(sed 1q "$dotest/final-commit") + + if test -f "$dotest/final-commit" + then + FIRSTLINE=$(sed 1q "$dotest/final-commit") + else + FIRSTLINE="" + fi if test $action = skip then @@ -726,6 +741,8 @@ do resolved= git diff-index --quiet --cached HEAD -- && { echo "No changes - did you forget to use 'git add'?" + echo "If there is nothing left to stage, chances are that something else" + echo "already introduced the same changes; you might want to skip this patch." stop_here_user_resolve $this } unmerged=$(git ls-files -u) diff --git a/git-compat-util.h b/git-compat-util.h index edf352dee2..02a73eeb66 100644 --- a/git-compat-util.h +++ b/git-compat-util.h @@ -56,7 +56,7 @@ # define _XOPEN_SOURCE 500 # endif #elif !defined(__APPLE__) && !defined(__FreeBSD__) && !defined(__USLC__) && \ - !defined(_M_UNIX) && !defined(sgi) && !defined(__DragonFly__) + !defined(_M_UNIX) && !defined(__sgi) && !defined(__DragonFly__) #define _XOPEN_SOURCE 600 /* glibc2 and AIX 5.3L need 500, OpenBSD needs 600 for S_ISLNK() */ #define _XOPEN_SOURCE_EXTENDED 1 /* AIX 5.3L needs this */ #endif @@ -200,6 +200,7 @@ extern char *gitbasename(char *); #include "compat/bswap.h" /* General helper functions */ +extern void vreportf(const char *prefix, const char *err, va_list params); extern NORETURN void usage(const char *err); extern NORETURN void usagef(const char *err, ...) __attribute__((format (printf, 1, 2))); extern NORETURN void die(const char *err, ...) __attribute__((format (printf, 1, 2))); @@ -224,7 +225,6 @@ static inline const char *skip_prefix(const char *str, const char *prefix) #define PROT_READ 1 #define PROT_WRITE 2 #define MAP_PRIVATE 1 -#define MAP_FAILED ((void*)-1) #endif #define mmap git_mmap @@ -253,6 +253,10 @@ extern int git_munmap(void *start, size_t length); #endif /* NO_MMAP */ +#ifndef MAP_FAILED +#define MAP_FAILED ((void *)-1) +#endif + #ifdef NO_ST_BLOCKS_IN_STRUCT_STAT #define on_disk_bytes(st) ((st).st_size) #else @@ -363,7 +367,8 @@ static inline void *gitmempcpy(void *dest, const void *src, size_t n) extern void release_pack_memory(size_t, int); -extern void set_try_to_free_routine(void (*routine)(size_t)); +typedef void (*try_to_free_t)(size_t); +extern try_to_free_t set_try_to_free_routine(try_to_free_t); extern char *xstrdup(const char *str); extern void *xmalloc(size_t size); diff --git a/git-cvsserver.perl b/git-cvsserver.perl index 13751db882..e9f3037df3 100755 --- a/git-cvsserver.perl +++ b/git-cvsserver.perl @@ -183,12 +183,58 @@ if ($state->{method} eq 'pserver') { exit 1; } $line = <STDIN>; chomp $line; - unless ($line eq 'anonymous') { - print "E Only anonymous user allowed via pserver\n"; - print "I HATE YOU\n"; - exit 1; + my $user = $line; + $line = <STDIN>; chomp $line; + my $password = $line; + + if ($user eq 'anonymous') { + # "A" will be 1 byte, use length instead in case the + # encryption method ever changes (yeah, right!) + if (length($password) > 1 ) { + print "E Don't supply a password for the `anonymous' user\n"; + print "I HATE YOU\n"; + exit 1; + } + + # Fall through to LOVE + } else { + # Trying to authenticate a user + if (not exists $cfg->{gitcvs}->{authdb}) { + print "E the repo config file needs a [gitcvs] section with an 'authdb' parameter set to the filename of the authentication database\n"; + print "I HATE YOU\n"; + exit 1; + } + + my $authdb = $cfg->{gitcvs}->{authdb}; + + unless (-e $authdb) { + print "E The authentication database specified in [gitcvs.authdb] does not exist\n"; + print "I HATE YOU\n"; + exit 1; + } + + my $auth_ok; + open my $passwd, "<", $authdb or die $!; + while (<$passwd>) { + if (m{^\Q$user\E:(.*)}) { + if (crypt($user, descramble($password)) eq $1) { + $auth_ok = 1; + } + }; + } + close $passwd; + + unless ($auth_ok) { + print "I HATE YOU\n"; + exit 1; + } + + # Fall through to LOVE } - $line = <STDIN>; chomp $line; # validate the password? + + # For checking whether the user is anonymous on commit + $state->{user} = $user; + $line = <STDIN>; chomp $line; unless ($line eq "END $request REQUEST") { die "E Do not understand $line -- expecting END $request REQUEST\n"; @@ -1271,9 +1317,9 @@ sub req_ci $log->info("req_ci : " . ( defined($data) ? $data : "[NULL]" )); - if ( $state->{method} eq 'pserver') + if ( $state->{method} eq 'pserver' and $state->{user} eq 'anonymous' ) { - print "error 1 pserver access cannot commit\n"; + print "error 1 anonymous user cannot commit via pserver\n"; cleanupWorkTree(); exit; } @@ -2369,15 +2415,20 @@ sub kopts_from_path if ( defined ( $cfg->{gitcvs}{usecrlfattr} ) and $cfg->{gitcvs}{usecrlfattr} =~ /\s*(1|true|yes)\s*$/i ) { - my ($val) = check_attr( "crlf", $path ); - if ( $val eq "set" ) + my ($val) = check_attr( "text", $path ); + if ( $val eq "unspecified" ) { - return ""; + $val = check_attr( "crlf", $path ); } - elsif ( $val eq "unset" ) + if ( $val eq "unset" ) { return "-kb" } + elsif ( check_attr( "eol", $path ) ne "unspecified" || + $val eq "set" || $val eq "input" ) + { + return ""; + } else { $log->info("Unrecognized check_attr crlf $path : $val"); @@ -2586,6 +2637,43 @@ sub cvs_author $author; } + +sub descramble +{ + # This table is from src/scramble.c in the CVS source + my @SHIFTS = ( + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 114,120, 53, 79, 96,109, 72,108, 70, 64, 76, 67,116, 74, 68, 87, + 111, 52, 75,119, 49, 34, 82, 81, 95, 65,112, 86,118,110,122,105, + 41, 57, 83, 43, 46,102, 40, 89, 38,103, 45, 50, 42,123, 91, 35, + 125, 55, 54, 66,124,126, 59, 47, 92, 71,115, 78, 88,107,106, 56, + 36,121,117,104,101,100, 69, 73, 99, 63, 94, 93, 39, 37, 61, 48, + 58,113, 32, 90, 44, 98, 60, 51, 33, 97, 62, 77, 84, 80, 85,223, + 225,216,187,166,229,189,222,188,141,249,148,200,184,136,248,190, + 199,170,181,204,138,232,218,183,255,234,220,247,213,203,226,193, + 174,172,228,252,217,201,131,230,197,211,145,238,161,179,160,212, + 207,221,254,173,202,146,224,151,140,196,205,130,135,133,143,246, + 192,159,244,239,185,168,215,144,139,165,180,157,147,186,214,176, + 227,231,219,169,175,156,206,198,129,164,150,210,154,177,134,127, + 182,128,158,208,162,132,167,209,149,241,153,251,237,236,171,195, + 243,233,253,240,194,250,191,155,142,137,245,235,163,242,178,152 + ); + my ($str) = @_; + + # This should never happen, the same password format (A) has been + # used by CVS since the beginning of time + { + my $fmt = substr($str, 0, 1); + die "invalid password format `$fmt'" unless $fmt eq 'A'; + } + + my @str = unpack "C*", substr($str, 1); + my $ret = join '', map { chr $SHIFTS[$_] } @str; + return $ret; +} + + package GITCVS::log; #### diff --git a/git-instaweb.sh b/git-instaweb.sh index f6080149c2..6635fbefdf 100755 --- a/git-instaweb.sh +++ b/git-instaweb.sh @@ -24,6 +24,7 @@ restart restart the web server fqgitdir="$GIT_DIR" local="$(git config --bool --get instaweb.local)" httpd="$(git config --get instaweb.httpd)" +root="$(git config --get instaweb.gitwebdir)" port=$(git config --get instaweb.port) module_path="$(git config --get instaweb.modulepath)" @@ -34,6 +35,9 @@ conf="$GIT_DIR/gitweb/httpd.conf" # if installed, it doesn't need further configuration (module_path) test -z "$httpd" && httpd='lighttpd -f' +# Default is @@GITWEBDIR@@ +test -z "$root" && root='@@GITWEBDIR@@' + # any untaken local port will do... test -z "$port" && port=1234 @@ -46,6 +50,12 @@ resolve_full_httpd () { httpd="$httpd -f" fi ;; + *plackup*) + # server is started by running via generated gitweb.psgi in $fqgitdir/gitweb + full_httpd="$fqgitdir/gitweb/gitweb.psgi" + httpd_only="${httpd%% *}" # cut on first space + return + ;; esac httpd_only="$(echo $httpd | cut -f1 -d' ')" @@ -57,7 +67,7 @@ resolve_full_httpd () { # these days and those are not in most users $PATHs # in addition, we may have generated a server script # in $fqgitdir/gitweb. - for i in /usr/local/sbin /usr/sbin "$fqgitdir/gitweb" + for i in /usr/local/sbin /usr/sbin "$root" "$fqgitdir/gitweb" do if test -x "$i/$httpd_only" then @@ -83,8 +93,8 @@ start_httpd () { # don't quote $full_httpd, there can be arguments to it (-f) case "$httpd" in - *mongoose*) - #The mongoose server doesn't have a daemon mode so we'll have to fork it + *mongoose*|*plackup*) + #These servers don't have a daemon mode so we'll have to fork it $full_httpd "$fqgitdir/gitweb/httpd.conf" & #Save the pid before doing anything else (we'll print it later) pid=$! @@ -110,6 +120,20 @@ EOF stop_httpd () { test -f "$fqgitdir/pid" && kill $(cat "$fqgitdir/pid") + rm -f "$fqgitdir/pid" +} + +httpd_is_ready () { + "$PERL" -MIO::Socket::INET -e " +local \$| = 1; # turn on autoflush +exit if (IO::Socket::INET->new('127.0.0.1:$port')); +print 'Waiting for \'$httpd\' to start ..'; +do { + print '.'; + sleep(1); +} until (IO::Socket::INET->new('127.0.0.1:$port')); +print qq! (done)\n!; +" } while test $# != 0 @@ -159,8 +183,8 @@ done mkdir -p "$GIT_DIR/gitweb/tmp" GIT_EXEC_PATH="$(git --exec-path)" GIT_DIR="$fqgitdir" -export GIT_EXEC_PATH GIT_DIR - +GITWEB_CONFIG="$fqgitdir/gitweb/gitweb_config.perl" +export GIT_EXEC_PATH GIT_DIR GITWEB_CONFIG webrick_conf () { # generate a standalone server script in $fqgitdir/gitweb. @@ -192,7 +216,7 @@ EOF cat >"$conf" <<EOF :Port: $port -:DocumentRoot: "$fqgitdir/gitweb" +:DocumentRoot: "$root" :DirectoryIndex: ["gitweb.cgi"] :PidFile: "$fqgitdir/pid" EOF @@ -201,18 +225,18 @@ EOF lighttpd_conf () { cat > "$conf" <<EOF -server.document-root = "$fqgitdir/gitweb" +server.document-root = "$root" server.port = $port server.modules = ( "mod_setenv", "mod_cgi" ) server.indexfiles = ( "gitweb.cgi" ) server.pid-file = "$fqgitdir/pid" -server.errorlog = "$fqgitdir/gitweb/error.log" +server.errorlog = "$fqgitdir/gitweb/$httpd_only/error.log" # to enable, add "mod_access", "mod_accesslog" to server.modules # variable above and uncomment this -#accesslog.filename = "$fqgitdir/gitweb/access.log" +#accesslog.filename = "$fqgitdir/gitweb/$httpd_only/access.log" -setenv.add-environment = ( "PATH" => env.PATH ) +setenv.add-environment = ( "PATH" => env.PATH, "GITWEB_CONFIG" => env.GITWEB_CONFIG ) cgi.assign = ( ".cgi" => "" ) @@ -277,14 +301,15 @@ EOF apache2_conf () { test -z "$module_path" && module_path=/usr/lib/apache2/modules - mkdir -p "$GIT_DIR/gitweb/logs" bind= test x"$local" = xtrue && bind='127.0.0.1:' echo 'text/css css' > "$fqgitdir/mime.types" cat > "$conf" <<EOF ServerName "git-instaweb" -ServerRoot "$fqgitdir/gitweb" -DocumentRoot "$fqgitdir/gitweb" +ServerRoot "$root" +DocumentRoot "$root" +ErrorLog "$fqgitdir/gitweb/$httpd_only/error.log" +CustomLog "$fqgitdir/gitweb/$httpd_only/access.log" combined PidFile "$fqgitdir/pid" Listen $bind$port EOF @@ -303,13 +328,14 @@ EOF # check to see if Dennis Stosberg's mod_perl compatibility patch # (<20060621130708.Gcbc6e5c@leonov.stosberg.net>) has been applied if test -f "$module_path/mod_perl.so" && - sane_grep 'MOD_PERL' "$GIT_DIR/gitweb/gitweb.cgi" >/dev/null + sane_grep 'MOD_PERL' "$root/gitweb.cgi" >/dev/null then # favor mod_perl if available cat >> "$conf" <<EOF LoadModule perl_module $module_path/mod_perl.so PerlPassEnv GIT_DIR PerlPassEnv GIT_EXEC_DIR +PerlPassEnv GITWEB_CONFIG <Location /gitweb.cgi> SetHandler perl-script PerlResponseHandler ModPerl::Registry @@ -353,15 +379,15 @@ mongoose_conf() { # For detailed description of every option, visit # http://code.google.com/p/mongoose/wiki/MongooseManual -root $fqgitdir/gitweb +root $root ports $port index_files gitweb.cgi #ssl_cert $fqgitdir/gitweb/ssl_cert.pem -error_log $fqgitdir/gitweb/error.log -access_log $fqgitdir/gitweb/access.log +error_log $fqgitdir/gitweb/$httpd_only/error.log +access_log $fqgitdir/gitweb/$httpd_only/access.log #cgi setup -cgi_env PATH=$PATH,GIT_DIR=$GIT_DIR,GIT_EXEC_PATH=$GIT_EXEC_PATH +cgi_env PATH=$PATH,GIT_DIR=$GIT_DIR,GIT_EXEC_PATH=$GIT_EXEC_PATH,GITWEB_CONFIG=$GITWEB_CONFIG cgi_interp $PERL cgi_ext cgi,pl @@ -370,41 +396,165 @@ mime_types .gz=application/x-gzip,.tar.gz=application/x-tgz,.tgz=application/x-t EOF } - -script=' -s#^(my|our) \$projectroot =.*#$1 \$projectroot = "'$(dirname "$fqgitdir")'";#; -s#(my|our) \$gitbin =.*#$1 \$gitbin = "'$GIT_EXEC_PATH'";#; -s#(my|our) \$projects_list =.*#$1 \$projects_list = \$projectroot;#; -s#(my|our) \$git_temp =.*#$1 \$git_temp = "'$fqgitdir/gitweb/tmp'";#;' - -gitweb_cgi () { - cat > "$1.tmp" <<\EOFGITWEB -@@GITWEB_CGI@@ -EOFGITWEB - # Use the configured full path to perl to match the generated - # scripts' 'hashpling' line - "$PERL" -p -e "$script" "$1.tmp" > "$1" - chmod +x "$1" - rm -f "$1.tmp" +plackup_conf () { + # generate a standalone 'plackup' server script in $fqgitdir/gitweb + # with embedded configuration; it does not use "$conf" file + cat > "$fqgitdir/gitweb/gitweb.psgi" <<EOF +#!$PERL + +# gitweb - simple web interface to track changes in git repositories +# PSGI wrapper and server starter (see http://plackperl.org) + +use strict; + +use IO::Handle; +use Plack::MIME; +use Plack::Builder; +use Plack::App::WrapCGI; +use CGI::Emulate::PSGI 0.07; # minimum version required to work with gitweb + +# mimetype mapping (from lighttpd_conf) +Plack::MIME->add_type( + ".pdf" => "application/pdf", + ".sig" => "application/pgp-signature", + ".spl" => "application/futuresplash", + ".class" => "application/octet-stream", + ".ps" => "application/postscript", + ".torrent" => "application/x-bittorrent", + ".dvi" => "application/x-dvi", + ".gz" => "application/x-gzip", + ".pac" => "application/x-ns-proxy-autoconfig", + ".swf" => "application/x-shockwave-flash", + ".tar.gz" => "application/x-tgz", + ".tgz" => "application/x-tgz", + ".tar" => "application/x-tar", + ".zip" => "application/zip", + ".mp3" => "audio/mpeg", + ".m3u" => "audio/x-mpegurl", + ".wma" => "audio/x-ms-wma", + ".wax" => "audio/x-ms-wax", + ".ogg" => "application/ogg", + ".wav" => "audio/x-wav", + ".gif" => "image/gif", + ".jpg" => "image/jpeg", + ".jpeg" => "image/jpeg", + ".png" => "image/png", + ".xbm" => "image/x-xbitmap", + ".xpm" => "image/x-xpixmap", + ".xwd" => "image/x-xwindowdump", + ".css" => "text/css", + ".html" => "text/html", + ".htm" => "text/html", + ".js" => "text/javascript", + ".asc" => "text/plain", + ".c" => "text/plain", + ".cpp" => "text/plain", + ".log" => "text/plain", + ".conf" => "text/plain", + ".text" => "text/plain", + ".txt" => "text/plain", + ".dtd" => "text/xml", + ".xml" => "text/xml", + ".mpeg" => "video/mpeg", + ".mpg" => "video/mpeg", + ".mov" => "video/quicktime", + ".qt" => "video/quicktime", + ".avi" => "video/x-msvideo", + ".asf" => "video/x-ms-asf", + ".asx" => "video/x-ms-asf", + ".wmv" => "video/x-ms-wmv", + ".bz2" => "application/x-bzip", + ".tbz" => "application/x-bzip-compressed-tar", + ".tar.bz2" => "application/x-bzip-compressed-tar", + "" => "text/plain" +); + +my \$app = builder { + # to be able to override \$SIG{__WARN__} to log build time warnings + use CGI::Carp; # it sets \$SIG{__WARN__} itself + + my \$logdir = "$fqgitdir/gitweb/$httpd_only"; + open my \$access_log_fh, '>>', "\$logdir/access.log" + or die "Couldn't open access log '\$logdir/access.log': \$!"; + open my \$error_log_fh, '>>', "\$logdir/error.log" + or die "Couldn't open error log '\$logdir/error.log': \$!"; + + \$access_log_fh->autoflush(1); + \$error_log_fh->autoflush(1); + + # redirect build time warnings to error.log + \$SIG{'__WARN__'} = sub { + my \$msg = shift; + # timestamp warning like in CGI::Carp::warn + my \$stamp = CGI::Carp::stamp(); + \$msg =~ s/^/\$stamp/gm; + print \$error_log_fh \$msg; + }; + + # write errors to error.log, access to access.log + enable 'AccessLog', + format => "combined", + logger => sub { print \$access_log_fh @_; }; + enable sub { + my \$app = shift; + sub { + my \$env = shift; + \$env->{'psgi.errors'} = \$error_log_fh; + \$app->(\$env); + } + }; + # gitweb currently doesn't work with $SIG{CHLD} set to 'IGNORE', + # because it uses 'close $fd or die...' on piped filehandle $fh + # (which causes the parent process to wait for child to finish). + enable_if { \$SIG{'CHLD'} eq 'IGNORE' } sub { + my \$app = shift; + sub { + my \$env = shift; + local \$SIG{'CHLD'} = 'DEFAULT'; + local \$SIG{'CLD'} = 'DEFAULT'; + \$app->(\$env); + } + }; + # serve static files, i.e. stylesheet, images, script + enable 'Static', + path => sub { m!\.(js|css|png)\$! && s!^/gitweb/!! }, + root => "$root/", + encoding => 'utf-8'; # encoding for 'text/plain' files + # convert CGI application to PSGI app + Plack::App::WrapCGI->new(script => "$root/gitweb.cgi")->to_app; +}; + +# make it runnable as standalone app, +# like it would be run via 'plackup' utility +if (__FILE__ eq \$0) { + require Plack::Runner; + + my \$runner = Plack::Runner->new(); + \$runner->parse_options(qw(--env deployment --port $port), + "$local" ? qw(--host 127.0.0.1) : ()); + \$runner->run(\$app); } +__END__ +EOF -gitweb_css () { - cat > "$1" <<\EOFGITWEB -@@GITWEB_CSS@@ - -EOFGITWEB + chmod a+x "$fqgitdir/gitweb/gitweb.psgi" + # configuration is embedded in server script file, gitweb.psgi + rm -f "$conf" } -gitweb_js () { - cat > "$1" <<\EOFGITWEB -@@GITWEB_JS@@ - -EOFGITWEB +gitweb_conf() { + cat > "$fqgitdir/gitweb/gitweb_config.perl" <<EOF +#!/usr/bin/perl +our \$projectroot = "$(dirname "$fqgitdir")"; +our \$git_temp = "$fqgitdir/gitweb/tmp"; +our \$projects_list = \$projectroot; +EOF } -gitweb_cgi "$GIT_DIR/gitweb/gitweb.cgi" -gitweb_css "$GIT_DIR/@@GITWEB_CSS_NAME@@" -gitweb_js "$GIT_DIR/@@GITWEB_JS_NAME@@" +gitweb_conf + +resolve_full_httpd +mkdir -p "$fqgitdir/gitweb/$httpd_only" case "$httpd" in *lighttpd*) @@ -419,6 +569,9 @@ webrick) *mongoose*) mongoose_conf ;; +*plackup*) + plackup_conf + ;; *) echo "Unknown httpd specified: $httpd" exit 1 @@ -429,7 +582,7 @@ start_httpd url=http://127.0.0.1:$port if test -n "$browser"; then - git web--browse -b "$browser" $url || echo $url + httpd_is_ready && git web--browse -b "$browser" $url || echo $url else - git web--browse -c "instaweb.browser" $url || echo $url + httpd_is_ready && git web--browse -c "instaweb.browser" $url || echo $url fi diff --git a/git-merge-one-file.sh b/git-merge-one-file.sh index d067894bf4..b86402afa5 100755 --- a/git-merge-one-file.sh +++ b/git-merge-one-file.sh @@ -107,7 +107,7 @@ case "${1:-.}${2:-.}${3:-.}" in # remove lines that are unique to ours. orig=`git-unpack-file $2` sz0=`wc -c <"$orig"` - diff -u -La/$orig -Lb/$orig $orig $src2 | git apply --no-add + @@DIFF@@ -u -La/$orig -Lb/$orig $orig $src2 | git apply --no-add sz1=`wc -c <"$orig"` # If we do not have enough common material, it is not diff --git a/git-pull.sh b/git-pull.sh index 1a4729f7bb..a09a44ec4c 100755 --- a/git-pull.sh +++ b/git-pull.sh @@ -43,6 +43,7 @@ merge_args= curr_branch=$(git symbolic-ref -q HEAD) curr_branch_short="${curr_branch#refs/heads/}" rebase=$(git config --bool branch.$curr_branch_short.rebase) +dry_run= while : do case "$1" in @@ -104,6 +105,9 @@ do --no-r|--no-re|--no-reb|--no-reba|--no-rebas|--no-rebase) rebase=false ;; + --d|--dr|--dry|--dry-|--dry-r|--dry-ru|--dry-run) + dry_run=--dry-run + ;; -h|--h|--he|--hel|--help) usage ;; @@ -216,7 +220,8 @@ test true = "$rebase" && { done } orig_head=$(git rev-parse -q --verify HEAD) -git fetch $verbosity $progress --update-head-ok "$@" || exit 1 +git fetch $verbosity $progress $dry_run --update-head-ok "$@" || exit 1 +test -z "$dry_run" || exit 0 curr_head=$(git rev-parse -q --verify HEAD) if test -n "$orig_head" && test "$curr_head" != "$orig_head" diff --git a/git-rebase--interactive.sh b/git-rebase--interactive.sh index 436b7f5977..6b86abc64b 100755 --- a/git-rebase--interactive.sh +++ b/git-rebase--interactive.sh @@ -974,8 +974,9 @@ EOF test -d "$REWRITTEN" || test -n "$NEVER_FF" || skip_unnecessary_picks + output git checkout $ONTO || die_abort "could not detach HEAD" git update-ref ORIG_HEAD $HEAD - output git checkout $ONTO && do_rest + do_rest ;; esac shift diff --git a/git-rebase.sh b/git-rebase.sh index 44f5c65fdb..ab4afa7dee 100755 --- a/git-rebase.sh +++ b/git-rebase.sh @@ -3,7 +3,7 @@ # Copyright (c) 2005 Junio C Hamano. # -USAGE='[--interactive | -i] [-v] [--force-rebase | -f] [--no-ff] [--onto <newbase>] [<upstream>|--root] [<branch>] [--quiet | -q]' +USAGE='[--interactive | -i] [-v] [--force-rebase | -f] [--no-ff] [--onto <newbase>] (<upstream>|--root) [<branch>] [--quiet | -q]' LONG_USAGE='git-rebase replaces <branch> with a new branch of the same name. When the --onto option is provided the new branch starts out with a HEAD equal to <newbase>, otherwise it is equal to <upstream> @@ -198,14 +198,6 @@ test -f "$GIT_DIR"/rebase-apply/applying && is_interactive "$@" && exec git-rebase--interactive "$@" -if test $# -eq 0 -then - test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply || usage - test -d "$dotest" -o -f "$GIT_DIR"/rebase-apply/rebasing && - die 'A rebase is in progress, try --continue, --skip or --abort.' - die "No arguments given and $GIT_DIR/rebase-apply already exists." -fi - while test $# != 0 do case "$1" in @@ -370,6 +362,13 @@ do done test $# -gt 2 && usage +if test $# -eq 0 && test -z "$rebase_root" +then + test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply || usage + test -d "$dotest" -o -f "$GIT_DIR"/rebase-apply/rebasing && + die 'A rebase is in progress, try --continue, --skip or --abort.' +fi + # Make sure we do not have $GIT_DIR/rebase-apply if test -z "$do_merge" then diff --git a/git-remote-testgit.py b/git-remote-testgit.py index 92539222c5..df9d512f1a 100644 --- a/git-remote-testgit.py +++ b/git-remote-testgit.py @@ -1,6 +1,12 @@ #!/usr/bin/env python -import hashlib +# hashlib is only available in python >= 2.5 +try: + import hashlib + _digest = hashlib.sha1 +except ImportError: + import sha + _digest = sha.new import sys import os sys.path.insert(0, os.getenv("GITPYTHONLIB",".")) @@ -19,7 +25,7 @@ def get_repo(alias, url): repo.get_revs() repo.get_head() - hasher = hashlib.sha1() + hasher = _digest() hasher.update(repo.path) repo.hash = hasher.hexdigest() @@ -133,7 +139,10 @@ def do_export(repo, args): path = os.path.join(dirname, 'testgit.marks') print path - print path if os.path.exists(path) else "" + if os.path.exists(path): + print path + else: + print "" sys.stdout.flush() update_local_repo(repo) diff --git a/git-request-pull.sh b/git-request-pull.sh index 74238b0313..6fdea397dd 100755 --- a/git-request-pull.sh +++ b/git-request-pull.sh @@ -1,4 +1,4 @@ -#!/bin/sh -e +#!/bin/sh # Copyright 2005, Ryan Anderson <ryan@michonline.com> # # This file is licensed under the GPL v2, or a later version @@ -70,10 +70,10 @@ git show -s --format='The following changes since commit %H: %s (%ci) -are available in the git repository at:' $baserev -echo " $url $branch" -echo +are available in the git repository at:' $baserev && +echo " $url $branch" && +echo && -git shortlog ^$baserev $headrev -git diff -M --stat --summary $patch $merge_base..$headrev +git shortlog ^$baserev $headrev && +git diff -M --stat --summary $patch $merge_base..$headrev || exit exit $status diff --git a/git-send-email.perl b/git-send-email.perl index 111c981229..6dab3bf6a7 100755 --- a/git-send-email.perl +++ b/git-send-email.perl @@ -54,6 +54,7 @@ git send-email [options] <file | directory | rev-list options > --in-reply-to <str> * Email "In-Reply-To:" --annotate * Review each patch that will be sent in an editor. --compose * Open an editor for introduction. + --8bit-encoding <str> * Encoding to assume 8bit mails if undeclared Sending: --envelope-sender <str> * Email envelope sender. @@ -191,6 +192,7 @@ my ($smtp_server, $smtp_server_port, $smtp_authuser, $smtp_encryption); my ($identity, $aliasfiletype, @alias_files, @smtp_host_parts, $smtp_domain); my ($validate, $confirm); my (@suppress_cc); +my ($auto_8bit_encoding); my ($debug_net_smtp) = 0; # Net::SMTP, see send_message() @@ -222,6 +224,7 @@ my %config_settings = ( "multiedit" => \$multiedit, "confirm" => \$confirm, "from" => \$sender, + "assume8bitencoding" => \$auto_8bit_encoding, ); # Help users prepare for 1.7.0 @@ -297,6 +300,7 @@ my $rc = GetOptions("sender|from=s" => \$sender, "thread!" => \$thread, "validate!" => \$validate, "format-patch!" => \$format_patch, + "8bit-encoding=s" => \$auto_8bit_encoding, ); unless ($rc) { @@ -669,6 +673,35 @@ sub ask { return undef; } +my %broken_encoding; + +sub file_declares_8bit_cte($) { + my $fn = shift; + open (my $fh, '<', $fn); + while (my $line = <$fh>) { + last if ($line =~ /^$/); + return 1 if ($line =~ /^Content-Transfer-Encoding: .*8bit.*$/); + } + close $fh; + return 0; +} + +foreach my $f (@files) { + next unless (body_or_subject_has_nonascii($f) + && !file_declares_8bit_cte($f)); + $broken_encoding{$f} = 1; +} + +if (!defined $auto_8bit_encoding && scalar %broken_encoding) { + print "The following files are 8bit, but do not declare " . + "a Content-Transfer-Encoding.\n"; + foreach my $f (sort keys %broken_encoding) { + print " $f\n"; + } + $auto_8bit_encoding = ask("Which 8bit encoding should I declare [UTF-8]? ", + default => "UTF-8"); +} + my $prompting = 0; if (!defined $sender) { $sender = $repoauthor || $repocommitter || ''; @@ -1221,6 +1254,18 @@ foreach my $t (@files) { or die "(cc-cmd) failed to close pipe to '$cc_cmd'"; } + if ($broken_encoding{$t} && !$has_content_type) { + $has_content_type = 1; + push @xh, "MIME-Version: 1.0", + "Content-Type: text/plain; charset=$auto_8bit_encoding", + "Content-Transfer-Encoding: 8bit"; + $body_encoding = $auto_8bit_encoding; + } + + if ($broken_encoding{$t} && !is_rfc2047_quoted($subject)) { + $subject = quote_rfc2047($subject, $auto_8bit_encoding); + } + if (defined $author and $author ne $sender) { $message = "From: $author\n\n$message"; if (defined $author_encoding) { @@ -1233,6 +1278,7 @@ foreach my $t (@files) { } } else { + $has_content_type = 1; push @xh, 'MIME-Version: 1.0', "Content-Type: text/plain; charset=$author_encoding", @@ -1310,3 +1356,17 @@ sub file_has_nonascii { } return 0; } + +sub body_or_subject_has_nonascii { + my $fn = shift; + open(my $fh, '<', $fn) + or die "unable to open $fn: $!\n"; + while (my $line = <$fh>) { + last if $line =~ /^$/; + return 1 if $line =~ /^Subject.*[^[:ascii:]]/; + } + while (my $line = <$fh>) { + return 1 if $line =~ /[^[:ascii:]]/; + } + return 0; +} diff --git a/git-submodule.sh b/git-submodule.sh index 8175cb279d..d9950c2b7f 100755 --- a/git-submodule.sh +++ b/git-submodule.sh @@ -271,6 +271,8 @@ cmd_foreach() shift done + toplevel=$(pwd) + module_list | while read mode sha1 stage path do @@ -578,7 +580,7 @@ cmd_summary() { cd_to_toplevel # Get modified modules cared by user - modules=$(git $diff_cmd $cached --raw $head -- "$@" | + modules=$(git $diff_cmd $cached --ignore-submodules=dirty --raw $head -- "$@" | sane_egrep '^:([0-7]* )?160000' | while read mod_src mod_dst sha1_src sha1_dst status name do @@ -592,7 +594,7 @@ cmd_summary() { test -z "$modules" && return - git $diff_cmd $cached --raw $head -- $modules | + git $diff_cmd $cached --ignore-submodules=dirty --raw $head -- $modules | sane_egrep '^:([0-7]* )?160000' | cut -c2- | while read mod_src mod_dst sha1_src sha1_dst status name @@ -758,7 +760,7 @@ cmd_status() continue; fi set_name_rev "$path" "$sha1" - if git diff-files --quiet -- "$path" + if git diff-files --ignore-submodules=dirty --quiet -- "$path" then say " $sha1 $displaypath$revname" else diff --git a/git-svn.perl b/git-svn.perl index b3b6964f95..19d6848d0e 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -963,6 +963,7 @@ sub cmd_multi_init { } do_git_init_db(); if (defined $_trunk) { + $_trunk =~ s#^/+##; my $trunk_ref = 'refs/remotes/' . $_prefix . 'trunk'; # try both old-style and new-style lookups: my $gs_trunk = eval { Git::SVN->new($trunk_ref) }; @@ -2054,6 +2055,9 @@ sub new { "\":$ref_id\$\" in config\n"; ($self->{path}, undef) = split(/\s*:\s*/, $fetch); } + $self->{path} =~ s{/+}{/}g; + $self->{path} =~ s{\A/}{}; + $self->{path} =~ s{/\z}{}; $self->{url} = command_oneline('config', '--get', "svn-remote.$repo_id.url") or die "Failed to read \"svn-remote.$repo_id.url\" in config\n"; @@ -2836,8 +2840,9 @@ sub mkemptydirs { foreach my $d (sort keys %empty_dirs) { $d = uri_decode($d); $d =~ s/$strip//; + next unless length($d); next if -d $d; - if (-e _) { + if (-e $d) { warn "$d exists but is not a directory\n"; } else { print "creating empty directory: $d\n"; diff --git a/git-web--browse.sh b/git-web--browse.sh index a578c3a732..dbded76aaf 100755 --- a/git-web--browse.sh +++ b/git-web--browse.sh @@ -31,7 +31,7 @@ valid_custom_tool() valid_tool() { case "$1" in - firefox | iceweasel | konqueror | w3m | links | lynx | dillo | open | start) + firefox | iceweasel | chrome | chromium | konqueror | w3m | links | lynx | dillo | open | start) ;; # happy *) valid_custom_tool "$1" || return 1 @@ -103,7 +103,7 @@ fi if test -z "$browser" ; then if test -n "$DISPLAY"; then - browser_candidates="firefox iceweasel konqueror w3m links lynx dillo" + browser_candidates="firefox iceweasel chrome chromium konqueror w3m links lynx dillo" if test "$KDE_FULL_SESSION" = "true"; then browser_candidates="konqueror $browser_candidates" fi @@ -146,6 +146,11 @@ case "$browser" in test "$vers" -lt 2 && NEWTAB='' "$browser_path" $NEWTAB "$@" & ;; + chrome|chromium) + # Actual command for chromium is chromium-browser. + # No need to specify newTab. It's default in chromium + eval "$browser_path" "$@" & + ;; konqueror) case "$(basename "$browser_path")" in konqueror) @@ -329,7 +329,7 @@ static void handle_internal_command(int argc, const char **argv) { "fsck-objects", cmd_fsck, RUN_SETUP }, { "gc", cmd_gc, RUN_SETUP }, { "get-tar-commit-id", cmd_get_tar_commit_id }, - { "grep", cmd_grep, USE_PAGER }, + { "grep", cmd_grep }, { "hash-object", cmd_hash_object }, { "help", cmd_help }, { "index-pack", cmd_index_pack }, diff --git a/git_remote_helpers/git/exporter.py b/git_remote_helpers/git/exporter.py index dfaab00b5f..f40f9d6a29 100644 --- a/git_remote_helpers/git/exporter.py +++ b/git_remote_helpers/git/exporter.py @@ -48,4 +48,6 @@ class GitExporter(object): args = ["sed", "s_refs/heads/_" + self.repo.prefix + "_g"] - subprocess.check_call(args, stdin=p1.stdout) + child = subprocess.Popen(args, stdin=p1.stdout) + if child.wait() != 0: + raise CalledProcessError diff --git a/git_remote_helpers/git/importer.py b/git_remote_helpers/git/importer.py index af2919d92c..70a712729b 100644 --- a/git_remote_helpers/git/importer.py +++ b/git_remote_helpers/git/importer.py @@ -35,4 +35,6 @@ class GitImporter(object): if os.path.exists(path): args.append("--import-marks=" + path) - subprocess.check_call(args) + child = subprocess.Popen(args) + if child.wait() != 0: + raise CalledProcessError diff --git a/git_remote_helpers/git/non_local.py b/git_remote_helpers/git/non_local.py index d75ef8f214..f27389bb94 100644 --- a/git_remote_helpers/git/non_local.py +++ b/git_remote_helpers/git/non_local.py @@ -29,7 +29,9 @@ class NonLocalGit(object): os.makedirs(path) args = ["git", "clone", "--bare", "--quiet", self.repo.gitpath, path] - subprocess.check_call(args) + child = subprocess.Popen(args) + if child.wait() != 0: + raise CalledProcessError return path @@ -43,10 +45,14 @@ class NonLocalGit(object): die("could not find repo at %s", path) args = ["git", "--git-dir=" + path, "fetch", "--quiet", self.repo.gitpath] - subprocess.check_call(args) + child = subprocess.Popen(args) + if child.wait() != 0: + raise CalledProcessError args = ["git", "--git-dir=" + path, "update-ref", "refs/heads/master", "FETCH_HEAD"] - subprocess.check_call(args) + child = subprocess.Popen(args) + if child.wait() != 0: + raise CalledProcessError def push(self, base): """Pushes from the non-local repo to base. @@ -58,4 +64,6 @@ class NonLocalGit(object): die("could not find repo at %s", path) args = ["git", "--git-dir=" + path, "push", "--quiet", self.repo.gitpath] - subprocess.check_call(args) + child = subprocess.Popen(args) + if child.wait() != 0: + raise CalledProcessError diff --git a/git_remote_helpers/git/repo.py b/git_remote_helpers/git/repo.py index 82d5f78c7e..58e1cdb560 100644 --- a/git_remote_helpers/git/repo.py +++ b/git_remote_helpers/git/repo.py @@ -19,7 +19,10 @@ def is_remote(url): prefixes = ["http", "file", "git"] - return any(url.startswith(i) for i in prefixes) + for prefix in prefixes: + if url.startswith(prefix): + return True + return False class GitRepo(object): """Repo object representing a repo. @@ -50,7 +53,9 @@ class GitRepo(object): path = ".cached_revs" ofile = open(path, "w") - subprocess.check_call(args, stdout=ofile) + child = subprocess.Popen(args, stdout=ofile) + if child.wait() != 0: + raise CalledProcessError output = open(path).readlines() self.revmap = dict(sanitize(i) for i in output) if "HEAD" in self.revmap: diff --git a/gitweb/INSTALL b/gitweb/INSTALL index d484d76b75..823053173c 100644 --- a/gitweb/INSTALL +++ b/gitweb/INSTALL @@ -2,9 +2,10 @@ GIT web Interface (gitweb) Installation ======================================= First you have to generate gitweb.cgi from gitweb.perl using -"make gitweb", then copy appropriate files (gitweb.cgi, gitweb.js, -gitweb.css, git-logo.png and git-favicon.png) to their destination. -For example if git was (or is) installed with /usr prefix, you can do +"make gitweb", then "make install-gitweb" appropriate files +(gitweb.cgi, gitweb.js, gitweb.css, git-logo.png and git-favicon.png) +to their destination. For example if git was (or is) installed with +/usr prefix and gitwebdir is /var/www/cgi-bin, you can do $ make prefix=/usr gitweb ;# as yourself # make gitwebdir=/var/www/cgi-bin install-gitweb ;# as root @@ -81,16 +82,14 @@ Build example minifiers, you can do make GITWEB_PROJECTROOT="/home/local/scm" \ - GITWEB_JS="/gitweb/gitweb.js" \ - GITWEB_CSS="/gitweb/gitweb.css" \ - GITWEB_LOGO="/gitweb/git-logo.png" \ - GITWEB_FAVICON="/gitweb/git-favicon.png" \ + GITWEB_JS="gitweb/static/gitweb.js" \ + GITWEB_CSS="gitweb/static/gitweb.css" \ + GITWEB_LOGO="gitweb/static/git-logo.png" \ + GITWEB_FAVICON="gitweb/static/git-favicon.png" \ bindir=/usr/local/bin \ gitweb - cp -fv gitweb/gitweb.{cgi,js,css} \ - gitweb/git-{favicon,logo}.png \ - /var/www/cgi-bin/gitweb/ + make gitwebdir=/var/www/cgi-bin/gitweb install-gitweb Gitweb config file diff --git a/gitweb/Makefile b/gitweb/Makefile index 935d2d2e07..2fb7c2d77b 100644 --- a/gitweb/Makefile +++ b/gitweb/Makefile @@ -4,10 +4,10 @@ all:: # Define V=1 to have a more verbose compile. # # Define JSMIN to point to JavaScript minifier that functions as -# a filter to have gitweb.js minified. +# a filter to have static/gitweb.js minified. # # Define CSSMIN to point to a CSS minifier in order to generate a minified -# version of gitweb.css +# version of static/gitweb.css # prefix ?= $(HOME) @@ -29,10 +29,10 @@ GITWEB_STRICT_EXPORT = GITWEB_BASE_URL = GITWEB_LIST = GITWEB_HOMETEXT = indextext.html -GITWEB_CSS = gitweb.css -GITWEB_LOGO = git-logo.png -GITWEB_FAVICON = git-favicon.png -GITWEB_JS = gitweb.js +GITWEB_CSS = static/gitweb.css +GITWEB_LOGO = static/git-logo.png +GITWEB_FAVICON = static/git-favicon.png +GITWEB_JS = static/gitweb.js GITWEB_SITE_HEADER = GITWEB_SITE_FOOTER = @@ -54,6 +54,7 @@ PERL_PATH ?= /usr/bin/perl # Shell quote; bindir_SQ = $(subst ','\'',$(bindir))#' gitwebdir_SQ = $(subst ','\'',$(gitwebdir))#' +gitwebstaticdir_SQ = $(subst ','\'',$(gitwebdir)/static)#' SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))#' PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH))#' DESTDIR_SQ = $(subst ','\'',$(DESTDIR))#' @@ -88,26 +89,26 @@ all:: gitweb.cgi GITWEB_PROGRAMS = gitweb.cgi ifdef JSMIN -GITWEB_FILES += gitweb.min.js -GITWEB_JS = gitweb.min.js -all:: gitweb.min.js -gitweb.min.js: gitweb.js GITWEB-BUILD-OPTIONS +GITWEB_FILES += static/gitweb.min.js +GITWEB_JS = static/gitweb.min.js +all:: static/gitweb.min.js +static/gitweb.min.js: static/gitweb.js GITWEB-BUILD-OPTIONS $(QUIET_GEN)$(JSMIN) <$< >$@ else -GITWEB_FILES += gitweb.js +GITWEB_FILES += static/gitweb.js endif ifdef CSSMIN -GITWEB_FILES += gitweb.min.css -GITWEB_CSS = gitweb.min.css -all:: gitweb.min.css -gitweb.min.css: gitweb.css GITWEB-BUILD-OPTIONS - $(QUIET_GEN)$(CSSMIN) <$ >$@ +GITWEB_FILES += static/gitweb.min.css +GITWEB_CSS = static/gitweb.min.css +all:: static/gitweb.min.css +static/gitweb.min.css: static/gitweb.css GITWEB-BUILD-OPTIONS + $(QUIET_GEN)$(CSSMIN) <$< >$@ else -GITWEB_FILES += gitweb.css +GITWEB_FILES += static/gitweb.css endif -GITWEB_FILES += git-logo.png git-favicon.png +GITWEB_FILES += static/git-logo.png static/git-favicon.png GITWEB_REPLACE = \ -e 's|++GIT_VERSION++|$(GIT_VERSION)|g' \ @@ -147,12 +148,13 @@ gitweb.cgi: gitweb.perl GITWEB-BUILD-OPTIONS install: all $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(gitwebdir_SQ)' $(INSTALL) -m 755 $(GITWEB_PROGRAMS) '$(DESTDIR_SQ)$(gitwebdir_SQ)' - $(INSTALL) -m 644 $(GITWEB_FILES) '$(DESTDIR_SQ)$(gitwebdir_SQ)' + $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(gitwebstaticdir_SQ)' + $(INSTALL) -m 644 $(GITWEB_FILES) '$(DESTDIR_SQ)$(gitwebstaticdir_SQ)' ### Cleaning rules clean: - $(RM) gitweb.cgi gitweb.min.js gitweb.min.css GITWEB-BUILD-OPTIONS + $(RM) gitweb.cgi static/gitweb.min.js static/gitweb.min.css GITWEB-BUILD-OPTIONS .PHONY: all clean install .FORCE-GIT-VERSION-FILE FORCE diff --git a/gitweb/README b/gitweb/README index 71742b335d..0e19be8d21 100644 --- a/gitweb/README +++ b/gitweb/README @@ -80,24 +80,26 @@ You can specify the following configuration variables when building GIT: Points to the location where you put gitweb.css on your web server (or to be more generic, the URI of gitweb stylesheet). Relative to the base URI of gitweb. Note that you can setup multiple stylesheets from - the gitweb config file. [Default: gitweb.css (or gitweb.min.css if the - CSSMIN variable is defined / CSS minifier is used)] + the gitweb config file. [Default: static/gitweb.css (or + static/gitweb.min.css if the CSSMIN variable is defined / CSS minifier + is used)] * GITWEB_LOGO Points to the location where you put git-logo.png on your web server (or to be more generic URI of logo, 72x27 size, displayed in top right corner of each gitweb page, and used as logo for Atom feed). Relative - to base URI of gitweb. [Default: git-logo.png] + to base URI of gitweb. [Default: static/git-logo.png] * GITWEB_FAVICON Points to the location where you put git-favicon.png on your web server (or to be more generic URI of favicon, assumed to be image/png type; web browsers that support favicons (website icons) may display them in the browser's URL bar and next to site name in bookmarks). Relative - to base URI of gitweb. [Default: git-favicon.png] + to base URI of gitweb. [Default: static/git-favicon.png] * GITWEB_JS Points to the localtion where you put gitweb.js on your web server (or to be more generic URI of JavaScript code used by gitweb). - Relative to base URI of gitweb. [Default: gitweb.js (or gitweb.min.js - if JSMIN build variable is defined / JavaScript minifier is used)] + Relative to base URI of gitweb. [Default: static/gitweb.js (or + static/gitweb.min.js if JSMIN build variable is defined / JavaScript + minifier is used)] * GITWEB_CONFIG This Perl file will be loaded using 'do' and can be used to override any of the options above as well as some other options -- see the "Runtime diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl index 934aacb614..9446376535 100755 --- a/gitweb/gitweb.perl +++ b/gitweb/gitweb.perl @@ -28,34 +28,42 @@ BEGIN { CGI->compile() if $ENV{'MOD_PERL'}; } -our $cgi = new CGI; our $version = "++GIT_VERSION++"; -our $my_url = $cgi->url(); -our $my_uri = $cgi->url(-absolute => 1); -# Base URL for relative URLs in gitweb ($logo, $favicon, ...), -# needed and used only for URLs with nonempty PATH_INFO -our $base_url = $my_url; +our ($my_url, $my_uri, $base_url, $path_info, $home_link); +sub evaluate_uri { + our $cgi; -# When the script is used as DirectoryIndex, the URL does not contain the name -# of the script file itself, and $cgi->url() fails to strip PATH_INFO, so we -# have to do it ourselves. We make $path_info global because it's also used -# later on. -# -# Another issue with the script being the DirectoryIndex is that the resulting -# $my_url data is not the full script URL: this is good, because we want -# generated links to keep implying the script name if it wasn't explicitly -# indicated in the URL we're handling, but it means that $my_url cannot be used -# as base URL. -# Therefore, if we needed to strip PATH_INFO, then we know that we have -# to build the base URL ourselves: -our $path_info = $ENV{"PATH_INFO"}; -if ($path_info) { - if ($my_url =~ s,\Q$path_info\E$,, && - $my_uri =~ s,\Q$path_info\E$,, && - defined $ENV{'SCRIPT_NAME'}) { - $base_url = $cgi->url(-base => 1) . $ENV{'SCRIPT_NAME'}; + our $my_url = $cgi->url(); + our $my_uri = $cgi->url(-absolute => 1); + + # Base URL for relative URLs in gitweb ($logo, $favicon, ...), + # needed and used only for URLs with nonempty PATH_INFO + our $base_url = $my_url; + + # When the script is used as DirectoryIndex, the URL does not contain the name + # of the script file itself, and $cgi->url() fails to strip PATH_INFO, so we + # have to do it ourselves. We make $path_info global because it's also used + # later on. + # + # Another issue with the script being the DirectoryIndex is that the resulting + # $my_url data is not the full script URL: this is good, because we want + # generated links to keep implying the script name if it wasn't explicitly + # indicated in the URL we're handling, but it means that $my_url cannot be used + # as base URL. + # Therefore, if we needed to strip PATH_INFO, then we know that we have + # to build the base URL ourselves: + our $path_info = $ENV{"PATH_INFO"}; + if ($path_info) { + if ($my_url =~ s,\Q$path_info\E$,, && + $my_uri =~ s,\Q$path_info\E$,, && + defined $ENV{'SCRIPT_NAME'}) { + $base_url = $cgi->url(-base => 1) . $ENV{'SCRIPT_NAME'}; + } } + + # target of the home link on top of all pages + our $home_link = $my_uri || "/"; } # core git executable to use @@ -70,9 +78,6 @@ our $projectroot = "++GITWEB_PROJECTROOT++"; # the number is relative to the projectroot our $project_maxdepth = "++GITWEB_PROJECT_MAXDEPTH++"; -# target of the home link on top of all pages -our $home_link = $my_uri || "/"; - # string of the home link on top of all pages our $home_link_str = "++GITWEB_HOME_LINK_STR++"; @@ -445,6 +450,19 @@ our %feature = ( 'javascript-actions' => { 'override' => 0, 'default' => [0]}, + + # Syntax highlighting support. This is based on Daniel Svensson's + # and Sham Chukoury's work in gitweb-xmms2.git. + # It requires the 'highlight' program present in $PATH, + # and therefore is disabled by default. + + # To enable system wide have in $GITWEB_CONFIG + # $feature{'highlight'}{'default'} = [1]; + + 'highlight' => { + 'sub' => sub { feature_bool('highlight', @_) }, + 'override' => 0, + 'default' => [0]}, ); sub gitweb_get_feature { @@ -553,15 +571,18 @@ sub filter_snapshot_fmts { !$known_snapshot_formats{$_}{'disabled'}} @fmts; } -our $GITWEB_CONFIG = $ENV{'GITWEB_CONFIG'} || "++GITWEB_CONFIG++"; -our $GITWEB_CONFIG_SYSTEM = $ENV{'GITWEB_CONFIG_SYSTEM'} || "++GITWEB_CONFIG_SYSTEM++"; -# die if there are errors parsing config file -if (-e $GITWEB_CONFIG) { - do $GITWEB_CONFIG; - die $@ if $@; -} elsif (-e $GITWEB_CONFIG_SYSTEM) { - do $GITWEB_CONFIG_SYSTEM; - die $@ if $@; +our ($GITWEB_CONFIG, $GITWEB_CONFIG_SYSTEM); +sub evaluate_gitweb_config { + our $GITWEB_CONFIG = $ENV{'GITWEB_CONFIG'} || "++GITWEB_CONFIG++"; + our $GITWEB_CONFIG_SYSTEM = $ENV{'GITWEB_CONFIG_SYSTEM'} || "++GITWEB_CONFIG_SYSTEM++"; + # die if there are errors parsing config file + if (-e $GITWEB_CONFIG) { + do $GITWEB_CONFIG; + die $@ if $@; + } elsif (-e $GITWEB_CONFIG_SYSTEM) { + do $GITWEB_CONFIG_SYSTEM; + die $@ if $@; + } } # Get loadavg of system, to compare against $maxload. @@ -587,13 +608,16 @@ sub get_loadavg { } # version of the core git binary -our $git_version = qx("$GIT" --version) =~ m/git version (.*)$/ ? $1 : "unknown"; -$number_of_git_cmds++; - -$projects_list ||= $projectroot; +our $git_version; +sub evaluate_git_version { + our $git_version = qx("$GIT" --version) =~ m/git version (.*)$/ ? $1 : "unknown"; + $number_of_git_cmds++; +} -if (defined $maxload && get_loadavg() > $maxload) { - die_error(503, "The load average on the server is too high"); +sub check_loadavg { + if (defined $maxload && get_loadavg() > $maxload) { + die_error(503, "The load average on the server is too high"); + } } # ====================================================================== @@ -680,11 +704,15 @@ our %allowed_options = ( # should be single values, but opt can be an array. We should probably # build an array of parameters that can be multi-valued, but since for the time # being it's only this one, we just single it out -while (my ($name, $symbol) = each %cgi_param_mapping) { - if ($symbol eq 'opt') { - $input_params{$name} = [ $cgi->param($symbol) ]; - } else { - $input_params{$name} = $cgi->param($symbol); +sub evaluate_query_params { + our $cgi; + + while (my ($name, $symbol) = each %cgi_param_mapping) { + if ($symbol eq 'opt') { + $input_params{$name} = [ $cgi->param($symbol) ]; + } else { + $input_params{$name} = $cgi->param($symbol); + } } } @@ -831,125 +859,134 @@ sub evaluate_path_info { } } } -evaluate_path_info(); -our $action = $input_params{'action'}; -if (defined $action) { - if (!validate_action($action)) { - die_error(400, "Invalid action parameter"); +our ($action, $project, $file_name, $file_parent, $hash, $hash_parent, $hash_base, + $hash_parent_base, @extra_options, $page, $searchtype, $search_use_regexp, + $searchtext, $search_regexp); +sub evaluate_and_validate_params { + our $action = $input_params{'action'}; + if (defined $action) { + if (!validate_action($action)) { + die_error(400, "Invalid action parameter"); + } } -} -# parameters which are pathnames -our $project = $input_params{'project'}; -if (defined $project) { - if (!validate_project($project)) { - undef $project; - die_error(404, "No such project"); + # parameters which are pathnames + our $project = $input_params{'project'}; + if (defined $project) { + if (!validate_project($project)) { + undef $project; + die_error(404, "No such project"); + } } -} -our $file_name = $input_params{'file_name'}; -if (defined $file_name) { - if (!validate_pathname($file_name)) { - die_error(400, "Invalid file parameter"); + our $file_name = $input_params{'file_name'}; + if (defined $file_name) { + if (!validate_pathname($file_name)) { + die_error(400, "Invalid file parameter"); + } } -} -our $file_parent = $input_params{'file_parent'}; -if (defined $file_parent) { - if (!validate_pathname($file_parent)) { - die_error(400, "Invalid file parent parameter"); + our $file_parent = $input_params{'file_parent'}; + if (defined $file_parent) { + if (!validate_pathname($file_parent)) { + die_error(400, "Invalid file parent parameter"); + } } -} -# parameters which are refnames -our $hash = $input_params{'hash'}; -if (defined $hash) { - if (!validate_refname($hash)) { - die_error(400, "Invalid hash parameter"); + # parameters which are refnames + our $hash = $input_params{'hash'}; + if (defined $hash) { + if (!validate_refname($hash)) { + die_error(400, "Invalid hash parameter"); + } } -} -our $hash_parent = $input_params{'hash_parent'}; -if (defined $hash_parent) { - if (!validate_refname($hash_parent)) { - die_error(400, "Invalid hash parent parameter"); + our $hash_parent = $input_params{'hash_parent'}; + if (defined $hash_parent) { + if (!validate_refname($hash_parent)) { + die_error(400, "Invalid hash parent parameter"); + } } -} -our $hash_base = $input_params{'hash_base'}; -if (defined $hash_base) { - if (!validate_refname($hash_base)) { - die_error(400, "Invalid hash base parameter"); + our $hash_base = $input_params{'hash_base'}; + if (defined $hash_base) { + if (!validate_refname($hash_base)) { + die_error(400, "Invalid hash base parameter"); + } } -} -our @extra_options = @{$input_params{'extra_options'}}; -# @extra_options is always defined, since it can only be (currently) set from -# CGI, and $cgi->param() returns the empty array in array context if the param -# is not set -foreach my $opt (@extra_options) { - if (not exists $allowed_options{$opt}) { - die_error(400, "Invalid option parameter"); - } - if (not grep(/^$action$/, @{$allowed_options{$opt}})) { - die_error(400, "Invalid option parameter for this action"); + our @extra_options = @{$input_params{'extra_options'}}; + # @extra_options is always defined, since it can only be (currently) set from + # CGI, and $cgi->param() returns the empty array in array context if the param + # is not set + foreach my $opt (@extra_options) { + if (not exists $allowed_options{$opt}) { + die_error(400, "Invalid option parameter"); + } + if (not grep(/^$action$/, @{$allowed_options{$opt}})) { + die_error(400, "Invalid option parameter for this action"); + } } -} -our $hash_parent_base = $input_params{'hash_parent_base'}; -if (defined $hash_parent_base) { - if (!validate_refname($hash_parent_base)) { - die_error(400, "Invalid hash parent base parameter"); + our $hash_parent_base = $input_params{'hash_parent_base'}; + if (defined $hash_parent_base) { + if (!validate_refname($hash_parent_base)) { + die_error(400, "Invalid hash parent base parameter"); + } } -} -# other parameters -our $page = $input_params{'page'}; -if (defined $page) { - if ($page =~ m/[^0-9]/) { - die_error(400, "Invalid page parameter"); + # other parameters + our $page = $input_params{'page'}; + if (defined $page) { + if ($page =~ m/[^0-9]/) { + die_error(400, "Invalid page parameter"); + } } -} -our $searchtype = $input_params{'searchtype'}; -if (defined $searchtype) { - if ($searchtype =~ m/[^a-z]/) { - die_error(400, "Invalid searchtype parameter"); + our $searchtype = $input_params{'searchtype'}; + if (defined $searchtype) { + if ($searchtype =~ m/[^a-z]/) { + die_error(400, "Invalid searchtype parameter"); + } } -} -our $search_use_regexp = $input_params{'search_use_regexp'}; + our $search_use_regexp = $input_params{'search_use_regexp'}; -our $searchtext = $input_params{'searchtext'}; -our $search_regexp; -if (defined $searchtext) { - if (length($searchtext) < 2) { - die_error(403, "At least two characters are required for search parameter"); + our $searchtext = $input_params{'searchtext'}; + our $search_regexp; + if (defined $searchtext) { + if (length($searchtext) < 2) { + die_error(403, "At least two characters are required for search parameter"); + } + $search_regexp = $search_use_regexp ? $searchtext : quotemeta $searchtext; } - $search_regexp = $search_use_regexp ? $searchtext : quotemeta $searchtext; } # path to the current git repository our $git_dir; -$git_dir = "$projectroot/$project" if $project; - -# list of supported snapshot formats -our @snapshot_fmts = gitweb_get_feature('snapshot'); -@snapshot_fmts = filter_snapshot_fmts(@snapshot_fmts); - -# check that the avatar feature is set to a known provider name, -# and for each provider check if the dependencies are satisfied. -# if the provider name is invalid or the dependencies are not met, -# reset $git_avatar to the empty string. -our ($git_avatar) = gitweb_get_feature('avatar'); -if ($git_avatar eq 'gravatar') { - $git_avatar = '' unless (eval { require Digest::MD5; 1; }); -} elsif ($git_avatar eq 'picon') { - # no dependencies -} else { - $git_avatar = ''; +sub evaluate_git_dir { + our $git_dir = "$projectroot/$project" if $project; +} + +our (@snapshot_fmts, $git_avatar); +sub configure_gitweb_features { + # list of supported snapshot formats + our @snapshot_fmts = gitweb_get_feature('snapshot'); + @snapshot_fmts = filter_snapshot_fmts(@snapshot_fmts); + + # check that the avatar feature is set to a known provider name, + # and for each provider check if the dependencies are satisfied. + # if the provider name is invalid or the dependencies are not met, + # reset $git_avatar to the empty string. + our ($git_avatar) = gitweb_get_feature('avatar'); + if ($git_avatar eq 'gravatar') { + $git_avatar = '' unless (eval { require Digest::MD5; 1; }); + } elsif ($git_avatar eq 'picon') { + # no dependencies + } else { + $git_avatar = ''; + } } # custom error handler: 'die <message>' is Internal Server Error @@ -968,27 +1005,118 @@ sub handle_errors_html { set_message(\&handle_errors_html); # dispatch -if (!defined $action) { - if (defined $hash) { - $action = git_get_type($hash); - } elsif (defined $hash_base && defined $file_name) { - $action = git_get_type("$hash_base:$file_name"); - } elsif (defined $project) { - $action = 'summary'; - } else { - $action = 'project_list'; +sub dispatch { + if (!defined $action) { + if (defined $hash) { + $action = git_get_type($hash); + } elsif (defined $hash_base && defined $file_name) { + $action = git_get_type("$hash_base:$file_name"); + } elsif (defined $project) { + $action = 'summary'; + } else { + $action = 'project_list'; + } } + if (!defined($actions{$action})) { + die_error(400, "Unknown action"); + } + if ($action !~ m/^(?:opml|project_list|project_index)$/ && + !$project) { + die_error(400, "Project needed"); + } + $actions{$action}->(); +} + +sub run_request { + our $t0 = [Time::HiRes::gettimeofday()] + if defined $t0; + + evaluate_uri(); + evaluate_gitweb_config(); + evaluate_git_version(); + check_loadavg(); + + # $projectroot and $projects_list might be set in gitweb config file + $projects_list ||= $projectroot; + + evaluate_query_params(); + evaluate_path_info(); + evaluate_and_validate_params(); + evaluate_git_dir(); + + configure_gitweb_features(); + + dispatch(); } -if (!defined($actions{$action})) { - die_error(400, "Unknown action"); + +our $is_last_request = sub { 1 }; +our ($pre_dispatch_hook, $post_dispatch_hook, $pre_listen_hook); +our $CGI = 'CGI'; +our $cgi; +sub configure_as_fcgi { + require CGI::Fast; + our $CGI = 'CGI::Fast'; + + my $request_number = 0; + # let each child service 100 requests + our $is_last_request = sub { ++$request_number > 100 }; } -if ($action !~ m/^(?:opml|project_list|project_index)$/ && - !$project) { - die_error(400, "Project needed"); +sub evaluate_argv { + my $script_name = $ENV{'SCRIPT_NAME'} || $ENV{'SCRIPT_FILENAME'} || __FILE__; + configure_as_fcgi() + if $script_name =~ /\.fcgi$/; + + return unless (@ARGV); + + require Getopt::Long; + Getopt::Long::GetOptions( + 'fastcgi|fcgi|f' => \&configure_as_fcgi, + 'nproc|n=i' => sub { + my ($arg, $val) = @_; + return unless eval { require FCGI::ProcManager; 1; }; + my $proc_manager = FCGI::ProcManager->new({ + n_processes => $val, + }); + our $pre_listen_hook = sub { $proc_manager->pm_manage() }; + our $pre_dispatch_hook = sub { $proc_manager->pm_pre_dispatch() }; + our $post_dispatch_hook = sub { $proc_manager->pm_post_dispatch() }; + }, + ); +} + +sub run { + evaluate_argv(); + + $pre_listen_hook->() + if $pre_listen_hook; + + REQUEST: + while ($cgi = $CGI->new()) { + $pre_dispatch_hook->() + if $pre_dispatch_hook; + + run_request(); + + $pre_dispatch_hook->() + if $post_dispatch_hook; + + last REQUEST if ($is_last_request->()); + } + + DONE_GITWEB: + 1; +} + +run(); + +if (defined caller) { + # wrapped in a subroutine processing requests, + # e.g. mod_perl with ModPerl::Registry, or PSGI with Plack::App::WrapCGI + return; +} else { + # pure CGI script, serving single request + exit; } -$actions{$action}->(); -DONE_GITWEB: -1; ## ====================================================================== ## action links @@ -3179,6 +3307,61 @@ sub blob_contenttype { return $type; } +# guess file syntax for syntax highlighting; return undef if no highlighting +# the name of syntax can (in the future) depend on syntax highlighter used +sub guess_file_syntax { + my ($highlight, $mimetype, $file_name) = @_; + return undef unless ($highlight && defined $file_name); + + # configuration for 'highlight' (http://www.andre-simon.de/) + # match by basename + my %highlight_basename = ( + #'Program' => 'py', + #'Library' => 'py', + 'SConstruct' => 'py', # SCons equivalent of Makefile + 'Makefile' => 'make', + ); + # match by extension + my %highlight_ext = ( + # main extensions, defining name of syntax; + # see files in /usr/share/highlight/langDefs/ directory + map { $_ => $_ } + qw(py c cpp rb java css php sh pl js tex bib xml awk bat ini spec tcl), + # alternate extensions, see /etc/highlight/filetypes.conf + 'h' => 'c', + map { $_ => 'cpp' } qw(cxx c++ cc), + map { $_ => 'php' } qw(php3 php4), + map { $_ => 'pl' } qw(perl pm), # perhaps also 'cgi' + 'mak' => 'make', + map { $_ => 'xml' } qw(xhtml html htm), + ); + + my $basename = basename($file_name, '.in'); + return $highlight_basename{$basename} + if exists $highlight_basename{$basename}; + + $basename =~ /\.([^.]*)$/; + my $ext = $1 or return undef; + return $highlight_ext{$ext} + if exists $highlight_ext{$ext}; + + return undef; +} + +# run highlighter and return FD of its output, +# or return original FD if no highlighting +sub run_highlighter { + my ($fd, $highlight, $syntax) = @_; + return $fd unless ($highlight && defined $syntax); + + close $fd + or die_error(404, "Reading blob failed"); + open $fd, quote_command(git_cmd(), "cat-file", "blob", $hash)." | ". + "highlight --xhtml --fragment --syntax $syntax |" + or die_error(500, "Couldn't open file or run syntax highlighter"); + return $fd; +} + ## ====================================================================== ## functions printing HTML: header, footer, error page @@ -3220,7 +3403,7 @@ sub git_header_html { } print $cgi->header(-type=>$content_type, -charset => 'utf-8', -status=> $status, -expires => $expires) - unless ($opts{'-no_http_headers'}); + unless ($opts{'-no_http_header'}); my $mod_perl_version = $ENV{'MOD_PERL'} ? " $ENV{'MOD_PERL'}" : ''; print <<EOF; <?xml version="1.0" encoding="utf-8"?> @@ -5380,6 +5563,7 @@ sub git_blob { open my $fd, "-|", git_cmd(), "cat-file", "blob", $hash or die_error(500, "Couldn't cat $file_name, $hash"); my $mimetype = blob_mimetype($fd, $file_name); + # use 'blob_plain' (aka 'raw') view for files that cannot be displayed if ($mimetype !~ m!^(?:text/|image/(?:gif|png|jpeg)$)! && -B $fd) { close $fd; return git_blob_plain($mimetype); @@ -5387,6 +5571,11 @@ sub git_blob { # we can have blame only for text/* mimetype $have_blame &&= ($mimetype =~ m!^text/!); + my $highlight = gitweb_check_feature('highlight'); + my $syntax = guess_file_syntax($highlight, $mimetype, $file_name); + $fd = run_highlighter($fd, $highlight, $syntax) + if $syntax; + git_header_html(undef, $expires); my $formats_nav = ''; if (defined $hash_base && (my %co = parse_commit($hash_base))) { @@ -5436,9 +5625,8 @@ sub git_blob { chomp $line; $nr++; $line = untabify($line); - printf "<div class=\"pre\"><a id=\"l%i\" href=\"" . href(-replay => 1) - . "#l%i\" class=\"linenr\">%4i</a> %s</div>\n", - $nr, $nr, $nr, esc_html($line, -nbsp=>1); + printf qq!<div class="pre"><a id="l%i" href="%s#l%i" class="linenr">%4i</a> %s</div>\n!, + $nr, href(-replay => 1), $nr, $nr, $syntax ? $line : esc_html($line, -nbsp=>1); } } close $fd diff --git a/gitweb/git-favicon.png b/gitweb/static/git-favicon.png Binary files differindex aae35a70e7..aae35a70e7 100644 --- a/gitweb/git-favicon.png +++ b/gitweb/static/git-favicon.png diff --git a/gitweb/git-logo.png b/gitweb/static/git-logo.png Binary files differindex f4ede2e944..f4ede2e944 100644 --- a/gitweb/git-logo.png +++ b/gitweb/static/git-logo.png diff --git a/gitweb/gitweb.css b/gitweb/static/gitweb.css index 50067f2e0d..4132aabcdb 100644 --- a/gitweb/gitweb.css +++ b/gitweb/static/gitweb.css @@ -572,3 +572,21 @@ span.match { div.binary { font-style: italic; } + +/* Style definition generated by highlight 2.4.5, http://www.andre-simon.de/ */ + +/* Highlighting theme definition: */ + +.num { color:#2928ff; } +.esc { color:#ff00ff; } +.str { color:#ff0000; } +.dstr { color:#818100; } +.slc { color:#838183; font-style:italic; } +.com { color:#838183; font-style:italic; } +.dir { color:#008200; } +.sym { color:#000000; } +.line { color:#555555; } +.kwa { color:#000000; font-weight:bold; } +.kwb { color:#830000; } +.kwc { color:#000000; font-weight:bold; } +.kwd { color:#010181; } diff --git a/gitweb/gitweb.js b/gitweb/static/gitweb.js index 9c66928c4a..9c66928c4a 100644 --- a/gitweb/gitweb.js +++ b/gitweb/static/gitweb.js @@ -211,6 +211,18 @@ struct git_graph { unsigned short default_column_color; }; +static struct strbuf *diff_output_prefix_callback(struct diff_options *opt, void *data) +{ + struct git_graph *graph = data; + static struct strbuf msgbuf = STRBUF_INIT; + + assert(graph); + + strbuf_reset(&msgbuf); + graph_padding_line(graph, &msgbuf); + return &msgbuf; +} + struct git_graph *graph_init(struct rev_info *opt) { struct git_graph *graph = xmalloc(sizeof(struct git_graph)); @@ -244,6 +256,13 @@ struct git_graph *graph_init(struct rev_info *opt) graph->mapping = xmalloc(sizeof(int) * 2 * graph->column_capacity); graph->new_mapping = xmalloc(sizeof(int) * 2 * graph->column_capacity); + /* + * The diff output prefix callback, with this we can make + * all the diff output to align with the graph lines. + */ + opt->diffopt.output_prefix = diff_output_prefix_callback; + opt->diffopt.output_prefix_data = graph; + return graph; } @@ -7,6 +7,7 @@ void append_header_grep_pattern(struct grep_opt *opt, enum grep_header_field fie { struct grep_pat *p = xcalloc(1, sizeof(*p)); p->pattern = pat; + p->patternlen = strlen(pat); p->origin = "header"; p->no = 0; p->token = GREP_PATTERN_HEAD; @@ -19,8 +20,15 @@ void append_header_grep_pattern(struct grep_opt *opt, enum grep_header_field fie void append_grep_pattern(struct grep_opt *opt, const char *pat, const char *origin, int no, enum grep_pat_token t) { + append_grep_pat(opt, pat, strlen(pat), origin, no, t); +} + +void append_grep_pat(struct grep_opt *opt, const char *pat, size_t patlen, + const char *origin, int no, enum grep_pat_token t) +{ struct grep_pat *p = xcalloc(1, sizeof(*p)); p->pattern = pat; + p->patternlen = patlen; p->origin = origin; p->no = no; p->token = t; @@ -44,8 +52,8 @@ struct grep_opt *grep_opt_dup(const struct grep_opt *opt) append_header_grep_pattern(ret, pat->field, pat->pattern); else - append_grep_pattern(ret, pat->pattern, pat->origin, - pat->no, pat->token); + append_grep_pat(ret, pat->pattern, pat->patternlen, + pat->origin, pat->no, pat->token); } return ret; @@ -329,14 +337,21 @@ static void show_name(struct grep_opt *opt, const char *name) opt->output(opt, opt->null_following_name ? "\0" : "\n", 1); } - -static int fixmatch(const char *pattern, char *line, int ignore_case, regmatch_t *match) +static int fixmatch(struct grep_pat *p, char *line, char *eol, + regmatch_t *match) { char *hit; - if (ignore_case) - hit = strcasestr(line, pattern); - else - hit = strstr(line, pattern); + + if (p->ignore_case) { + char *s = line; + do { + hit = strcasestr(s, p->pattern); + if (hit) + break; + s += strlen(s) + 1; + } while (s < eol); + } else + hit = memmem(line, eol - line, p->pattern, p->patternlen); if (!hit) { match->rm_so = match->rm_eo = -1; @@ -344,11 +359,22 @@ static int fixmatch(const char *pattern, char *line, int ignore_case, regmatch_t } else { match->rm_so = hit - line; - match->rm_eo = match->rm_so + strlen(pattern); + match->rm_eo = match->rm_so + p->patternlen; return 0; } } +static int regmatch(const regex_t *preg, char *line, char *eol, + regmatch_t *match, int eflags) +{ +#ifdef REG_STARTEND + match->rm_so = 0; + match->rm_eo = eol - line; + eflags |= REG_STARTEND; +#endif + return regexec(preg, line, 1, match, eflags); +} + static int strip_timestamp(char *bol, char **eol_p) { char *eol = *eol_p; @@ -399,9 +425,9 @@ static int match_one_pattern(struct grep_pat *p, char *bol, char *eol, again: if (p->fixed) - hit = !fixmatch(p->pattern, bol, p->ignore_case, pmatch); + hit = !fixmatch(p, bol, eol, pmatch); else - hit = !regexec(&p->regexp, bol, 1, pmatch, eflags); + hit = !regmatch(&p->regexp, bol, eol, pmatch, eflags); if (hit && p->word_regexp) { if ((pmatch[0].rm_so < 0) || @@ -726,16 +752,9 @@ static int look_ahead(struct grep_opt *opt, regmatch_t m; if (p->fixed) - hit = !fixmatch(p->pattern, bol, p->ignore_case, &m); - else { -#ifdef REG_STARTEND - m.rm_so = 0; - m.rm_eo = *left_p; - hit = !regexec(&p->regexp, bol, 1, &m, REG_STARTEND); -#else - hit = !regexec(&p->regexp, bol, 1, &m, 0); -#endif - } + hit = !fixmatch(p, bol, bol + *left_p, &m); + else + hit = !regmatch(&p->regexp, bol, bol + *left_p, &m, 0); if (!hit || m.rm_so < 0 || m.rm_eo < 0) continue; if (earliest < 0 || m.rm_so < earliest) @@ -800,17 +819,19 @@ static int grep_buffer_1(struct grep_opt *opt, const char *name, opt->show_hunk_mark = 1; opt->last_shown = 0; - if (buffer_is_binary(buf, size)) { - switch (opt->binary) { - case GREP_BINARY_DEFAULT: + switch (opt->binary) { + case GREP_BINARY_DEFAULT: + if (buffer_is_binary(buf, size)) binary_match_only = 1; - break; - case GREP_BINARY_NOMATCH: + break; + case GREP_BINARY_NOMATCH: + if (buffer_is_binary(buf, size)) return 0; /* Assume unmatch */ - break; - default: - break; - } + break; + case GREP_BINARY_TEXT: + break; + default: + die("bug: unknown binary handling mode"); } memset(&xecfg, 0, sizeof(xecfg)); @@ -871,6 +892,12 @@ static int grep_buffer_1(struct grep_opt *opt, const char *name, count++; if (opt->status_only) return 1; + if (opt->name_only) { + show_name(opt, name); + return 1; + } + if (opt->count) + goto next_line; if (binary_match_only) { opt->output(opt, "Binary file ", 12); output_color(opt, name, strlen(name), @@ -878,22 +905,14 @@ static int grep_buffer_1(struct grep_opt *opt, const char *name, opt->output(opt, " matches\n", 9); return 1; } - if (opt->name_only) { - show_name(opt, name); - return 1; - } /* Hit at this line. If we haven't shown the * pre-context lines, we would need to show them. - * When asked to do "count", this still show - * the context which is nonsense, but the user - * deserves to get that ;-). */ if (opt->pre_context) show_pre_context(opt, name, buf, bol, lno); else if (opt->funcname) show_funcname_line(opt, name, buf, bol, lno); - if (!opt->count) - show_line(opt, bol, eol, name, lno, ':'); + show_line(opt, bol, eol, name, lno, ':'); last_hit = lno; } else if (last_hit && @@ -937,6 +956,7 @@ static int grep_buffer_1(struct grep_opt *opt, const char *name, output_sep(opt, ':'); snprintf(buf, sizeof(buf), "%u\n", count); opt->output(opt, buf, strlen(buf)); + return 1; } return !!last_hit; } @@ -10,17 +10,17 @@ enum grep_pat_token { GREP_OPEN_PAREN, GREP_CLOSE_PAREN, GREP_NOT, - GREP_OR, + GREP_OR }; enum grep_context { GREP_CONTEXT_HEAD, - GREP_CONTEXT_BODY, + GREP_CONTEXT_BODY }; enum grep_header_field { GREP_HEADER_AUTHOR = 0, - GREP_HEADER_COMMITTER, + GREP_HEADER_COMMITTER }; struct grep_pat { @@ -29,6 +29,7 @@ struct grep_pat { int no; enum grep_pat_token token; const char *pattern; + size_t patternlen; enum grep_header_field field; regex_t regexp; unsigned fixed:1; @@ -40,7 +41,7 @@ enum grep_expr_node { GREP_NODE_ATOM, GREP_NODE_NOT, GREP_NODE_AND, - GREP_NODE_OR, + GREP_NODE_OR }; struct grep_expr { @@ -104,6 +105,7 @@ struct grep_opt { void *output_priv; }; +extern void append_grep_pat(struct grep_opt *opt, const char *pat, size_t patlen, const char *origin, int no, enum grep_pat_token t); extern void append_grep_pattern(struct grep_opt *opt, const char *pat, const char *origin, int no, enum grep_pat_token t); extern void append_header_grep_pattern(struct grep_opt *, enum grep_header_field, const char *); extern void compile_grep_patterns(struct grep_opt *opt); diff --git a/http-backend.c b/http-backend.c index d1e83d0906..14c90c2e84 100644 --- a/http-backend.c +++ b/http-backend.c @@ -6,6 +6,7 @@ #include "exec_cmd.h" #include "run-command.h" #include "string-list.h" +#include "url.h" static const char content_type[] = "Content-Type"; static const char content_length[] = "Content-Length"; @@ -25,60 +26,6 @@ static struct rpc_service rpc_service[] = { { "receive-pack", "receivepack", -1 }, }; -static int decode_char(const char *q) -{ - int i; - unsigned char val = 0; - for (i = 0; i < 2; i++) { - unsigned char c = *q++; - val <<= 4; - if (c >= '0' && c <= '9') - val += c - '0'; - else if (c >= 'a' && c <= 'f') - val += c - 'a' + 10; - else if (c >= 'A' && c <= 'F') - val += c - 'A' + 10; - else - return -1; - } - return val; -} - -static char *decode_parameter(const char **query, int is_name) -{ - const char *q = *query; - struct strbuf out; - - strbuf_init(&out, 16); - do { - unsigned char c = *q; - - if (!c) - break; - if (c == '&' || (is_name && c == '=')) { - q++; - break; - } - - if (c == '%') { - int val = decode_char(q + 1); - if (0 <= val) { - strbuf_addch(&out, val); - q += 3; - continue; - } - } - - if (c == '+') - strbuf_addch(&out, ' '); - else - strbuf_addch(&out, c); - q++; - } while (1); - *query = q; - return strbuf_detach(&out, NULL); -} - static struct string_list *get_parameters(void) { if (!query_params) { @@ -86,13 +33,13 @@ static struct string_list *get_parameters(void) query_params = xcalloc(1, sizeof(*query_params)); while (query && *query) { - char *name = decode_parameter(&query, 1); - char *value = decode_parameter(&query, 0); + char *name = url_decode_parameter_name(&query); + char *value = url_decode_parameter_value(&query); struct string_list_item *i; - i = string_list_lookup(name, query_params); + i = string_list_lookup(query_params, name); if (!i) - i = string_list_insert(name, query_params); + i = string_list_insert(query_params, name); else free(i->util); i->util = value; @@ -104,7 +51,7 @@ static struct string_list *get_parameters(void) static const char *get_parameter(const char *name) { struct string_list_item *i; - i = string_list_lookup(name, get_parameters()); + i = string_list_lookup(get_parameters(), name); return i ? i->util : NULL; } @@ -541,14 +488,12 @@ static NORETURN void die_webcgi(const char *err, va_list params) static int dead; if (!dead) { - char buffer[1000]; dead = 1; - - vsnprintf(buffer, sizeof(buffer), err, params); - fprintf(stderr, "fatal: %s\n", buffer); http_status(500, "Internal Server Error"); hdr_nocache(); end_headers(); + + vreportf("fatal: ", err, params); } exit(0); /* we successfully reported a failure ;-) */ } diff --git a/http-push.c b/http-push.c index 415b1ab0a7..c9bcd11697 100644 --- a/http-push.c +++ b/http-push.c @@ -105,7 +105,7 @@ enum transfer_state { RUN_PUT, RUN_MOVE, ABORTED, - COMPLETE, + COMPLETE }; struct transfer_request diff --git a/http-walker.c b/http-walker.c index 8ca76d0507..18bd6504be 100644 --- a/http-walker.c +++ b/http-walker.c @@ -15,7 +15,7 @@ enum object_request_state { WAITING, ABORTED, ACTIVE, - COMPLETE, + COMPLETE }; struct object_request diff --git a/imap-send.c b/imap-send.c index 9d0097ca02..1a577a0a09 100644 --- a/imap-send.c +++ b/imap-send.c @@ -230,7 +230,7 @@ enum CAPABILITY { LITERALPLUS, NAMESPACE, STARTTLS, - AUTH_CRAM_MD5, + AUTH_CRAM_MD5 }; static const char *cap_list[] = { diff --git a/ll-merge.c b/ll-merge.c index f9b3d854a9..3764a1ab72 100644 --- a/ll-merge.c +++ b/ll-merge.c @@ -139,17 +139,17 @@ static int ll_ext_merge(const struct ll_merge_driver *fn, { char temp[4][50]; struct strbuf cmd = STRBUF_INIT; - struct strbuf_expand_dict_entry dict[] = { - { "O", temp[0] }, - { "A", temp[1] }, - { "B", temp[2] }, - { "L", temp[3] }, - { NULL } - }; + struct strbuf_expand_dict_entry dict[5]; const char *args[] = { NULL, NULL }; int status, fd, i; struct stat st; + dict[0].placeholder = "O"; dict[0].value = temp[0]; + dict[1].placeholder = "A"; dict[1].value = temp[1]; + dict[2].placeholder = "B"; dict[2].value = temp[2]; + dict[3].placeholder = "L"; dict[3].value = temp[3]; + dict[4].placeholder = NULL; dict[4].value = NULL; + if (fn->cmdline == NULL) die("custom merge driver %s lacks command line.", fn->name); diff --git a/log-tree.c b/log-tree.c index d3ae969f60..2e2be7c40f 100644 --- a/log-tree.c +++ b/log-tree.c @@ -469,6 +469,12 @@ int log_tree_diff_flush(struct rev_info *opt) int pch = DIFF_FORMAT_DIFFSTAT | DIFF_FORMAT_PATCH; if ((pch & opt->diffopt.output_format) == pch) printf("---"); + if (opt->diffopt.output_prefix) { + struct strbuf *msg = NULL; + msg = opt->diffopt.output_prefix(&opt->diffopt, + opt->diffopt.output_prefix_data); + fwrite(msg->buf, msg->len, 1, stdout); + } putchar('\n'); } } @@ -69,7 +69,7 @@ static void add_mapping(struct string_list *map, index = -1 - index; } else { /* create mailmap entry */ - struct string_list_item *item = string_list_insert_at_index(index, old_email, map); + struct string_list_item *item = string_list_insert_at_index(map, index, old_email); item->util = xmalloc(sizeof(struct mailmap_entry)); memset(item->util, 0, sizeof(struct mailmap_entry)); ((struct mailmap_entry *)item->util)->namemap.strdup_strings = 1; @@ -92,7 +92,7 @@ static void add_mapping(struct string_list *map, mi->name = xstrdup(new_name); if (new_email) mi->email = xstrdup(new_email); - string_list_insert(old_name, &me->namemap)->util = mi; + string_list_insert(&me->namemap, old_name)->util = mi; } debug_mm("mailmap: '%s' <%s> -> '%s' <%s>\n", @@ -214,13 +214,13 @@ int map_user(struct string_list *map, mailbuf[i] = 0; debug_mm("map_user: map '%s' <%s>\n", name, mailbuf); - item = string_list_lookup(mailbuf, map); + item = string_list_lookup(map, mailbuf); if (item != NULL) { me = (struct mailmap_entry *)item->util; if (me->namemap.nr) { /* The item has multiple items, so we'll look up on name too */ /* If the name is not found, we choose the simple entry */ - struct string_list_item *subitem = string_list_lookup(name, &me->namemap); + struct string_list_item *subitem = string_list_lookup(&me->namemap, name); if (subitem) item = subitem; } diff --git a/merge-file.c b/merge-file.c index c336c93c01..db4d0d50d3 100644 --- a/merge-file.c +++ b/merge-file.c @@ -66,7 +66,7 @@ static int generate_common_file(mmfile_t *res, mmfile_t *f1, mmfile_t *f2) xdemitcb_t ecb; memset(&xpp, 0, sizeof(xpp)); - xpp.flags = XDF_NEED_MINIMAL; + xpp.flags = 0; memset(&xecfg, 0, sizeof(xecfg)); xecfg.ctxlen = 3; xecfg.flags = XDL_EMIT_COMMON; diff --git a/merge-recursive.c b/merge-recursive.c index 206c103635..856e98c083 100644 --- a/merge-recursive.c +++ b/merge-recursive.c @@ -238,9 +238,9 @@ static int save_files_dirs(const unsigned char *sha1, newpath[baselen + len] = '\0'; if (S_ISDIR(mode)) - string_list_insert(newpath, &o->current_directory_set); + string_list_insert(&o->current_directory_set, newpath); else - string_list_insert(newpath, &o->current_file_set); + string_list_insert(&o->current_file_set, newpath); free(newpath); return (S_ISDIR(mode) ? READ_TREE_RECURSIVE : 0); @@ -271,7 +271,7 @@ static struct stage_data *insert_stage_data(const char *path, e->stages[2].sha, &e->stages[2].mode); get_tree_entry(b->object.sha1, path, e->stages[3].sha, &e->stages[3].mode); - item = string_list_insert(path, entries); + item = string_list_insert(entries, path); item->util = e; return e; } @@ -294,9 +294,9 @@ static struct string_list *get_unmerged(void) if (!ce_stage(ce)) continue; - item = string_list_lookup(ce->name, unmerged); + item = string_list_lookup(unmerged, ce->name); if (!item) { - item = string_list_insert(ce->name, unmerged); + item = string_list_insert(unmerged, ce->name); item->util = xcalloc(1, sizeof(struct stage_data)); } e = item->util; @@ -356,20 +356,20 @@ static struct string_list *get_renames(struct merge_options *o, re = xmalloc(sizeof(*re)); re->processed = 0; re->pair = pair; - item = string_list_lookup(re->pair->one->path, entries); + item = string_list_lookup(entries, re->pair->one->path); if (!item) re->src_entry = insert_stage_data(re->pair->one->path, o_tree, a_tree, b_tree, entries); else re->src_entry = item->util; - item = string_list_lookup(re->pair->two->path, entries); + item = string_list_lookup(entries, re->pair->two->path); if (!item) re->dst_entry = insert_stage_data(re->pair->two->path, o_tree, a_tree, b_tree, entries); else re->dst_entry = item->util; - item = string_list_insert(pair->one->path, renames); + item = string_list_insert(renames, pair->one->path); item->util = re; } opts.output_format = DIFF_FORMAT_NO_OUTPUT; @@ -432,7 +432,7 @@ static char *unique_path(struct merge_options *o, const char *path, const char * lstat(newpath, &st) == 0) sprintf(p, "_%d", suffix++); - string_list_insert(newpath, &o->current_file_set); + string_list_insert(&o->current_file_set, newpath); return newpath; } @@ -811,12 +811,12 @@ static int process_renames(struct merge_options *o, for (i = 0; i < a_renames->nr; i++) { sre = a_renames->items[i].util; - string_list_insert(sre->pair->two->path, &a_by_dst)->util + string_list_insert(&a_by_dst, sre->pair->two->path)->util = sre->dst_entry; } for (i = 0; i < b_renames->nr; i++) { sre = b_renames->items[i].util; - string_list_insert(sre->pair->two->path, &b_by_dst)->util + string_list_insert(&b_by_dst, sre->pair->two->path)->util = sre->dst_entry; } @@ -988,7 +988,7 @@ static int process_renames(struct merge_options *o, output(o, 1, "Adding as %s instead", new_path); update_file(o, 0, dst_other.sha1, dst_other.mode, new_path); } - } else if ((item = string_list_lookup(ren1_dst, renames2Dst))) { + } else if ((item = string_list_lookup(renames2Dst, ren1_dst))) { ren2 = item->util; clean_merge = 0; ren2->processed = 1; diff --git a/merge-recursive.h b/merge-recursive.h index 0cc465ec5d..b831293b38 100644 --- a/merge-recursive.h +++ b/merge-recursive.h @@ -10,7 +10,7 @@ struct merge_options { enum { MERGE_RECURSIVE_NORMAL = 0, MERGE_RECURSIVE_OURS, - MERGE_RECURSIVE_THEIRS, + MERGE_RECURSIVE_THEIRS } recursive_variant; const char *subtree_shift; unsigned buffer_output : 1; @@ -716,7 +716,7 @@ static int write_each_non_note_until(const char *note_path, struct write_each_note_data *d) { struct non_note *n = d->next_non_note; - int cmp, ret; + int cmp = 0, ret; while (n && (!note_path || (cmp = strcmp(n->path, note_path)) <= 0)) { if (note_path && cmp == 0) ; /* do nothing, prefer note to non-note */ @@ -838,7 +838,7 @@ static int string_list_add_one_ref(const char *path, const unsigned char *sha1, { struct string_list *refs = cb; if (!unsorted_string_list_has_string(refs, path)) - string_list_append(path, refs); + string_list_append(refs, path); return 0; } @@ -851,7 +851,7 @@ void string_list_add_refs_by_glob(struct string_list *list, const char *glob) if (get_sha1(glob, sha1)) warning("notes ref %s is invalid", glob); if (!unsorted_string_list_has_string(list, glob)) - string_list_append(glob, list); + string_list_append(list, glob); } } @@ -969,7 +969,7 @@ struct notes_tree **load_notes_trees(struct string_list *refs) trees = xmalloc((refs->nr+1) * sizeof(struct notes_tree *)); cb_data.counter = 0; cb_data.trees = trees; - for_each_string_list(load_one_display_note_ref, refs, &cb_data); + for_each_string_list(refs, load_one_display_note_ref, &cb_data); trees[cb_data.counter] = NULL; return trees; } @@ -983,7 +983,7 @@ void init_display_notes(struct display_notes_opt *opt) assert(!display_notes_trees); if (!opt || !opt->suppress_default_notes) { - string_list_append(default_notes_ref(), &display_notes_refs); + string_list_append(&display_notes_refs, default_notes_ref()); display_ref_env = getenv(GIT_NOTES_DISPLAY_REF_ENVIRONMENT); if (display_ref_env) { string_list_add_refs_from_colon_sep(&display_notes_refs, @@ -996,8 +996,8 @@ void init_display_notes(struct display_notes_opt *opt) git_config(notes_display_config, &load_config_refs); if (opt && opt->extra_notes_refs) - for_each_string_list(string_list_add_refs_from_list, - opt->extra_notes_refs, + for_each_string_list(opt->extra_notes_refs, + string_list_add_refs_from_list, &display_notes_refs); display_notes_trees = load_notes_trees(&display_notes_refs); @@ -1083,7 +1083,7 @@ int write_notes_tree(struct notes_tree *t, unsigned char *result) return ret; } -void prune_notes(struct notes_tree *t) +void prune_notes(struct notes_tree *t, int flags) { struct note_delete_list *l = NULL; @@ -1094,7 +1094,10 @@ void prune_notes(struct notes_tree *t) for_each_note(t, 0, prune_notes_helper, &l); while (l) { - remove_note(t, l->sha1); + if (flags & NOTES_PRUNE_VERBOSE) + printf("%s\n", sha1_to_hex(l->sha1)); + if (!(flags & NOTES_PRUNE_DRYRUN)) + remove_note(t, l->sha1); l = l->next; } } @@ -18,7 +18,7 @@ * combine_notes_concatenate(), which appends the contents of the new note to * the contents of the existing note. */ -typedef int combine_notes_fn(unsigned char *cur_sha1, const unsigned char *new_sha1); +typedef int (*combine_notes_fn)(unsigned char *cur_sha1, const unsigned char *new_sha1); /* Common notes combinators */ int combine_notes_concatenate(unsigned char *cur_sha1, const unsigned char *new_sha1); @@ -38,7 +38,7 @@ extern struct notes_tree { struct int_node *root; struct non_note *first_non_note, *prev_non_note; char *ref; - combine_notes_fn *combine_notes; + combine_notes_fn combine_notes; int initialized; int dirty; } default_notes_tree; @@ -171,6 +171,9 @@ int for_each_note(struct notes_tree *t, int flags, each_note_fn fn, */ int write_notes_tree(struct notes_tree *t, unsigned char *result); +/* Flags controlling the operation of prune */ +#define NOTES_PRUNE_VERBOSE 1 +#define NOTES_PRUNE_DRYRUN 2 /* * Remove all notes annotating non-existing objects from the given notes tree * @@ -181,7 +184,7 @@ int write_notes_tree(struct notes_tree *t, unsigned char *result); * structure are not persistent until a subsequent call to write_notes_tree() * returns zero. */ -void prune_notes(struct notes_tree *t); +void prune_notes(struct notes_tree *t, int flags); /* * Free (and de-initialize) the given notes_tree structure diff --git a/parse-options.c b/parse-options.c index 8546d8526f..0fa79bc31d 100644 --- a/parse-options.c +++ b/parse-options.c @@ -4,8 +4,9 @@ #include "commit.h" #include "color.h" -static int parse_options_usage(const char * const *usagestr, - const struct option *opts); +static int parse_options_usage(struct parse_opt_ctx_t *ctx, + const char * const *usagestr, + const struct option *opts, int err); #define OPT_SHORT 1 #define OPT_UNSET 2 @@ -351,8 +352,9 @@ void parse_options_start(struct parse_opt_ctx_t *ctx, die("STOP_AT_NON_OPTION and KEEP_UNKNOWN don't go together"); } -static int usage_with_options_internal(const char * const *, - const struct option *, int); +static int usage_with_options_internal(struct parse_opt_ctx_t *, + const char * const *, + const struct option *, int, int); int parse_options_step(struct parse_opt_ctx_t *ctx, const struct option *options, @@ -380,10 +382,10 @@ int parse_options_step(struct parse_opt_ctx_t *ctx, if (arg[1] != '-') { ctx->opt = arg + 1; if (internal_help && *ctx->opt == 'h') - return parse_options_usage(usagestr, options); + return parse_options_usage(ctx, usagestr, options, 0); switch (parse_short_opt(ctx, options)) { case -1: - return parse_options_usage(usagestr, options); + return parse_options_usage(ctx, usagestr, options, 1); case -2: goto unknown; } @@ -391,10 +393,10 @@ int parse_options_step(struct parse_opt_ctx_t *ctx, check_typos(arg + 1, options); while (ctx->opt) { if (internal_help && *ctx->opt == 'h') - return parse_options_usage(usagestr, options); + return parse_options_usage(ctx, usagestr, options, 0); switch (parse_short_opt(ctx, options)) { case -1: - return parse_options_usage(usagestr, options); + return parse_options_usage(ctx, usagestr, options, 1); case -2: /* fake a short option thing to hide the fact that we may have * started to parse aggregated stuff @@ -418,12 +420,12 @@ int parse_options_step(struct parse_opt_ctx_t *ctx, } if (internal_help && !strcmp(arg + 2, "help-all")) - return usage_with_options_internal(usagestr, options, 1); + return usage_with_options_internal(ctx, usagestr, options, 1, 0); if (internal_help && !strcmp(arg + 2, "help")) - return parse_options_usage(usagestr, options); + return parse_options_usage(ctx, usagestr, options, 0); switch (parse_long_opt(ctx, arg + 2, options)) { case -1: - return parse_options_usage(usagestr, options); + return parse_options_usage(ctx, usagestr, options, 1); case -2: goto unknown; } @@ -468,7 +470,7 @@ int parse_options(int argc, const char **argv, const char *prefix, return parse_options_end(&ctx); } -static int usage_argh(const struct option *opts) +static int usage_argh(const struct option *opts, FILE *outfile) { const char *s; int literal = (opts->flags & PARSE_OPT_LITERAL_ARGHELP) || !opts->argh; @@ -479,72 +481,81 @@ static int usage_argh(const struct option *opts) s = literal ? "[%s]" : "[<%s>]"; else s = literal ? " %s" : " <%s>"; - return fprintf(stderr, s, opts->argh ? opts->argh : "..."); + return fprintf(outfile, s, opts->argh ? opts->argh : "..."); } #define USAGE_OPTS_WIDTH 24 #define USAGE_GAP 2 -static int usage_with_options_internal(const char * const *usagestr, - const struct option *opts, int full) +static int usage_with_options_internal(struct parse_opt_ctx_t *ctx, + const char * const *usagestr, + const struct option *opts, int full, int err) { + FILE *outfile = err ? stderr : stdout; + if (!usagestr) return PARSE_OPT_HELP; - fprintf(stderr, "usage: %s\n", *usagestr++); + if (!err && ctx && ctx->flags & PARSE_OPT_SHELL_EVAL) + fprintf(outfile, "cat <<\\EOF\n"); + + fprintf(outfile, "usage: %s\n", *usagestr++); while (*usagestr && **usagestr) - fprintf(stderr, " or: %s\n", *usagestr++); + fprintf(outfile, " or: %s\n", *usagestr++); while (*usagestr) { - fprintf(stderr, "%s%s\n", + fprintf(outfile, "%s%s\n", **usagestr ? " " : "", *usagestr); usagestr++; } if (opts->type != OPTION_GROUP) - fputc('\n', stderr); + fputc('\n', outfile); for (; opts->type != OPTION_END; opts++) { size_t pos; int pad; if (opts->type == OPTION_GROUP) { - fputc('\n', stderr); + fputc('\n', outfile); if (*opts->help) - fprintf(stderr, "%s\n", opts->help); + fprintf(outfile, "%s\n", opts->help); continue; } if (!full && (opts->flags & PARSE_OPT_HIDDEN)) continue; - pos = fprintf(stderr, " "); + pos = fprintf(outfile, " "); if (opts->short_name && !(opts->flags & PARSE_OPT_NEGHELP)) { if (opts->flags & PARSE_OPT_NODASH) - pos += fprintf(stderr, "%c", opts->short_name); + pos += fprintf(outfile, "%c", opts->short_name); else - pos += fprintf(stderr, "-%c", opts->short_name); + pos += fprintf(outfile, "-%c", opts->short_name); } if (opts->long_name && opts->short_name) - pos += fprintf(stderr, ", "); + pos += fprintf(outfile, ", "); if (opts->long_name) - pos += fprintf(stderr, "--%s%s", + pos += fprintf(outfile, "--%s%s", (opts->flags & PARSE_OPT_NEGHELP) ? "no-" : "", opts->long_name); if (opts->type == OPTION_NUMBER) - pos += fprintf(stderr, "-NUM"); + pos += fprintf(outfile, "-NUM"); if (!(opts->flags & PARSE_OPT_NOARG)) - pos += usage_argh(opts); + pos += usage_argh(opts, outfile); if (pos <= USAGE_OPTS_WIDTH) pad = USAGE_OPTS_WIDTH - pos; else { - fputc('\n', stderr); + fputc('\n', outfile); pad = USAGE_OPTS_WIDTH; } - fprintf(stderr, "%*s%s\n", pad + USAGE_GAP, "", opts->help); + fprintf(outfile, "%*s%s\n", pad + USAGE_GAP, "", opts->help); } - fputc('\n', stderr); + fputc('\n', outfile); + + if (!err && ctx && ctx->flags & PARSE_OPT_SHELL_EVAL) + fputs("EOF\n", outfile); return PARSE_OPT_HELP; } @@ -552,7 +563,7 @@ static int usage_with_options_internal(const char * const *usagestr, void usage_with_options(const char * const *usagestr, const struct option *opts) { - usage_with_options_internal(usagestr, opts, 0); + usage_with_options_internal(NULL, usagestr, opts, 0, 1); exit(129); } @@ -564,10 +575,11 @@ void usage_msg_opt(const char *msg, usage_with_options(usagestr, options); } -static int parse_options_usage(const char * const *usagestr, - const struct option *opts) +static int parse_options_usage(struct parse_opt_ctx_t *ctx, + const char * const *usagestr, + const struct option *opts, int err) { - return usage_with_options_internal(usagestr, opts, 0); + return usage_with_options_internal(ctx, usagestr, opts, 0, err); } diff --git a/parse-options.h b/parse-options.h index 7581e931da..7435cdbf1d 100644 --- a/parse-options.h +++ b/parse-options.h @@ -25,7 +25,7 @@ enum parse_opt_flags { PARSE_OPT_STOP_AT_NON_OPTION = 2, PARSE_OPT_KEEP_ARGV0 = 4, PARSE_OPT_KEEP_UNKNOWN = 8, - PARSE_OPT_NO_INTERNAL_HELP = 16, + PARSE_OPT_NO_INTERNAL_HELP = 16 }; enum parse_opt_option_flags { @@ -37,6 +37,7 @@ enum parse_opt_option_flags { PARSE_OPT_NODASH = 32, PARSE_OPT_LITERAL_ARGHELP = 64, PARSE_OPT_NEGHELP = 128, + PARSE_OPT_SHELL_EVAL = 256 }; struct option; @@ -160,7 +161,7 @@ extern NORETURN void usage_msg_opt(const char *msg, enum { PARSE_OPT_HELP = -1, PARSE_OPT_DONE, - PARSE_OPT_UNKNOWN, + PARSE_OPT_UNKNOWN }; /* diff --git a/perl/Git.pm b/perl/Git.pm index 1926dc9a4b..6cb0dd1934 100644 --- a/perl/Git.pm +++ b/perl/Git.pm @@ -172,7 +172,7 @@ sub repository { } if (defined $opts{Directory}) { - -d $opts{Directory} or throw Error::Simple("Directory not found: $!"); + -d $opts{Directory} or throw Error::Simple("Directory not found: $opts{Directory} $!"); my $search = Git->repository(WorkingCopy => $opts{Directory}); my $dir; @@ -545,7 +545,7 @@ sub wc_chdir { or throw Error::Simple("bare repository"); -d $self->wc_path().'/'.$subdir - or throw Error::Simple("subdir not found: $!"); + or throw Error::Simple("subdir not found: $subdir $!"); # Of course we will not "hold" the subdirectory so anyone # can delete it now and we will never know. But at least we tried. @@ -11,6 +11,17 @@ #include "reflog-walk.h" static char *user_format; +static struct cmt_fmt_map { + const char *name; + enum cmit_fmt format; + int is_tformat; + int is_alias; + const char *user_format; +} *commit_formats; +static size_t builtin_formats_len; +static size_t commit_formats_len; +static size_t commit_formats_alloc; +static struct cmt_fmt_map *find_commit_format(const char *sought); static void save_user_format(struct rev_info *rev, const char *cp, int is_tformat) { @@ -21,22 +32,118 @@ static void save_user_format(struct rev_info *rev, const char *cp, int is_tforma rev->commit_format = CMIT_FMT_USERFORMAT; } -void get_commit_format(const char *arg, struct rev_info *rev) +static int git_pretty_formats_config(const char *var, const char *value, void *cb) { + struct cmt_fmt_map *commit_format = NULL; + const char *name; + const char *fmt; int i; - static struct cmt_fmt_map { - const char *n; - size_t cmp_len; - enum cmit_fmt v; - } cmt_fmts[] = { - { "raw", 1, CMIT_FMT_RAW }, - { "medium", 1, CMIT_FMT_MEDIUM }, - { "short", 1, CMIT_FMT_SHORT }, - { "email", 1, CMIT_FMT_EMAIL }, - { "full", 5, CMIT_FMT_FULL }, - { "fuller", 5, CMIT_FMT_FULLER }, - { "oneline", 1, CMIT_FMT_ONELINE }, + + if (prefixcmp(var, "pretty.")) + return 0; + + name = var + strlen("pretty."); + for (i = 0; i < builtin_formats_len; i++) { + if (!strcmp(commit_formats[i].name, name)) + return 0; + } + + for (i = builtin_formats_len; i < commit_formats_len; i++) { + if (!strcmp(commit_formats[i].name, name)) { + commit_format = &commit_formats[i]; + break; + } + } + + if (!commit_format) { + ALLOC_GROW(commit_formats, commit_formats_len+1, + commit_formats_alloc); + commit_format = &commit_formats[commit_formats_len]; + memset(commit_format, 0, sizeof(*commit_format)); + commit_formats_len++; + } + + commit_format->name = xstrdup(name); + commit_format->format = CMIT_FMT_USERFORMAT; + git_config_string(&fmt, var, value); + if (!prefixcmp(fmt, "format:") || !prefixcmp(fmt, "tformat:")) { + commit_format->is_tformat = fmt[0] == 't'; + fmt = strchr(fmt, ':') + 1; + } else if (strchr(fmt, '%')) + commit_format->is_tformat = 1; + else + commit_format->is_alias = 1; + commit_format->user_format = fmt; + + return 0; +} + +static void setup_commit_formats(void) +{ + struct cmt_fmt_map builtin_formats[] = { + { "raw", CMIT_FMT_RAW, 0 }, + { "medium", CMIT_FMT_MEDIUM, 0 }, + { "short", CMIT_FMT_SHORT, 0 }, + { "email", CMIT_FMT_EMAIL, 0 }, + { "fuller", CMIT_FMT_FULLER, 0 }, + { "full", CMIT_FMT_FULL, 0 }, + { "oneline", CMIT_FMT_ONELINE, 1 } }; + commit_formats_len = ARRAY_SIZE(builtin_formats); + builtin_formats_len = commit_formats_len; + ALLOC_GROW(commit_formats, commit_formats_len, commit_formats_alloc); + memcpy(commit_formats, builtin_formats, + sizeof(*builtin_formats)*ARRAY_SIZE(builtin_formats)); + + git_config(git_pretty_formats_config, NULL); +} + +static struct cmt_fmt_map *find_commit_format_recursive(const char *sought, + const char *original, + int num_redirections) +{ + struct cmt_fmt_map *found = NULL; + size_t found_match_len = 0; + int i; + + if (num_redirections >= commit_formats_len) + die("invalid --pretty format: " + "'%s' references an alias which points to itself", + original); + + for (i = 0; i < commit_formats_len; i++) { + size_t match_len; + + if (prefixcmp(commit_formats[i].name, sought)) + continue; + + match_len = strlen(commit_formats[i].name); + if (found == NULL || found_match_len > match_len) { + found = &commit_formats[i]; + found_match_len = match_len; + } + } + + if (found && found->is_alias) { + found = find_commit_format_recursive(found->user_format, + original, + num_redirections+1); + } + + return found; +} + +static struct cmt_fmt_map *find_commit_format(const char *sought) +{ + if (!commit_formats) + setup_commit_formats(); + + return find_commit_format_recursive(sought, sought, 0); +} + +void get_commit_format(const char *arg, struct rev_info *rev) +{ + struct cmt_fmt_map *commit_format; rev->use_terminator = 0; if (!arg || !*arg) { @@ -47,21 +154,22 @@ void get_commit_format(const char *arg, struct rev_info *rev) save_user_format(rev, strchr(arg, ':') + 1, arg[0] == 't'); return; } - for (i = 0; i < ARRAY_SIZE(cmt_fmts); i++) { - if (!strncmp(arg, cmt_fmts[i].n, cmt_fmts[i].cmp_len) && - !strncmp(arg, cmt_fmts[i].n, strlen(arg))) { - if (cmt_fmts[i].v == CMIT_FMT_ONELINE) - rev->use_terminator = 1; - rev->commit_format = cmt_fmts[i].v; - return; - } - } + if (strchr(arg, '%')) { save_user_format(rev, arg, 1); return; } - die("invalid --pretty format: %s", arg); + commit_format = find_commit_format(arg); + if (!commit_format) + die("invalid --pretty format: %s", arg); + + rev->commit_format = commit_format->format; + rev->use_terminator = commit_format->is_tformat; + if (commit_format->format == CMIT_FMT_USERFORMAT) { + save_user_format(rev, commit_format->user_format, + commit_format->is_tformat); + } } /* @@ -834,6 +942,7 @@ static size_t format_commit_item(struct strbuf *sb, const char *placeholder, NO_MAGIC, ADD_LF_BEFORE_NON_EMPTY, DEL_LF_BEFORE_EMPTY, + ADD_SP_BEFORE_NON_EMPTY } magic = NO_MAGIC; switch (placeholder[0]) { @@ -843,6 +952,9 @@ static size_t format_commit_item(struct strbuf *sb, const char *placeholder, case '+': magic = ADD_LF_BEFORE_NON_EMPTY; break; + case ' ': + magic = ADD_SP_BEFORE_NON_EMPTY; + break; default: break; } @@ -857,8 +969,11 @@ static size_t format_commit_item(struct strbuf *sb, const char *placeholder, if ((orig_len == sb->len) && magic == DEL_LF_BEFORE_EMPTY) { while (sb->len && sb->buf[sb->len - 1] == '\n') strbuf_setlen(sb, sb->len - 1); - } else if ((orig_len != sb->len) && magic == ADD_LF_BEFORE_NON_EMPTY) { - strbuf_insert(sb, orig_len, "\n", 1); + } else if (orig_len != sb->len) { + if (magic == ADD_LF_BEFORE_NON_EMPTY) + strbuf_insert(sb, orig_len, "\n", 1); + else if (magic == ADD_SP_BEFORE_NON_EMPTY) + strbuf_insert(sb, orig_len, " ", 1); } return consumed + 1; } @@ -868,7 +983,7 @@ static size_t userformat_want_item(struct strbuf *sb, const char *placeholder, { struct userformat_want *w = context; - if (*placeholder == '+' || *placeholder == '-') + if (*placeholder == '+' || *placeholder == '-' || *placeholder == ' ') placeholder++; switch (*placeholder) { @@ -295,42 +295,75 @@ void write_name_quotedpfx(const char *pfx, size_t pfxlen, fputc(terminator, fp); } -/* quote path as relative to the given prefix */ -char *quote_path_relative(const char *in, int len, - struct strbuf *out, const char *prefix) +static const char *path_relative(const char *in, int len, + struct strbuf *sb, const char *prefix, + int prefix_len); + +void write_name_quoted_relative(const char *name, size_t len, + const char *prefix, size_t prefix_len, + FILE *fp, int terminator) { - int needquote; + struct strbuf sb = STRBUF_INIT; + + name = path_relative(name, len, &sb, prefix, prefix_len); + write_name_quoted(name, fp, terminator); + + strbuf_release(&sb); +} + +/* + * Give path as relative to prefix. + * + * The strbuf may or may not be used, so do not assume it contains the + * returned path. + */ +static const char *path_relative(const char *in, int len, + struct strbuf *sb, const char *prefix, + int prefix_len) +{ + int off, i; if (len < 0) len = strlen(in); + if (prefix && prefix_len < 0) + prefix_len = strlen(prefix); + + off = 0; + i = 0; + while (i < prefix_len && i < len && prefix[i] == in[i]) { + if (prefix[i] == '/') + off = i + 1; + i++; + } + in += off; + len -= off; + + if (i >= prefix_len) + return in; - /* "../" prefix itself does not need quoting, but "in" might. */ - needquote = next_quote_pos(in, len) < len; - strbuf_setlen(out, 0); - strbuf_grow(out, len); - - if (needquote) - strbuf_addch(out, '"'); - if (prefix) { - int off = 0; - while (prefix[off] && off < len && prefix[off] == in[off]) - if (prefix[off] == '/') { - prefix += off + 1; - in += off + 1; - len -= off + 1; - off = 0; - } else - off++; - - for (; *prefix; prefix++) - if (*prefix == '/') - strbuf_addstr(out, "../"); + strbuf_reset(sb); + strbuf_grow(sb, len); + + while (i < prefix_len) { + if (prefix[i] == '/') + strbuf_addstr(sb, "../"); + i++; } + strbuf_add(sb, in, len); + + return sb->buf; +} - quote_c_style_counted (in, len, out, NULL, 1); +/* quote path as relative to the given prefix */ +char *quote_path_relative(const char *in, int len, + struct strbuf *out, const char *prefix) +{ + struct strbuf sb = STRBUF_INIT; + const char *rel = path_relative(in, len, &sb, prefix, -1); + strbuf_reset(out); + quote_c_style_counted(rel, strlen(rel), out, NULL, 0); + strbuf_release(&sb); - if (needquote) - strbuf_addch(out, '"'); if (!out->len) strbuf_addstr(out, "./"); @@ -54,9 +54,12 @@ extern void quote_two_c_style(struct strbuf *, const char *, const char *, int); extern void write_name_quoted(const char *name, FILE *, int terminator); extern void write_name_quotedpfx(const char *pfx, size_t pfxlen, const char *name, FILE *, int terminator); +extern void write_name_quoted_relative(const char *name, size_t len, + const char *prefix, size_t prefix_len, + FILE *fp, int terminator); /* quote path as relative to the given prefix */ -char *quote_path_relative(const char *in, int len, +extern char *quote_path_relative(const char *in, int len, struct strbuf *out, const char *prefix); /* quoting as a string literal for other languages */ diff --git a/reflog-walk.c b/reflog-walk.c index caba4f743f..4879615cad 100644 --- a/reflog-walk.c +++ b/reflog-walk.c @@ -162,7 +162,7 @@ int add_reflog_for_walk(struct reflog_walk_info *info, } else recno = 0; - item = string_list_lookup(branch, &info->complete_reflogs); + item = string_list_lookup(&info->complete_reflogs, branch); if (item) reflogs = item->util; else { @@ -190,7 +190,7 @@ int add_reflog_for_walk(struct reflog_walk_info *info, } if (!reflogs || reflogs->nr == 0) return -1; - string_list_insert(branch, &info->complete_reflogs)->util + string_list_insert(&info->complete_reflogs, branch)->util = reflogs; } @@ -314,7 +314,11 @@ static int warn_if_dangling_symref(const char *refname, const unsigned char *sha void warn_dangling_symref(FILE *fp, const char *msg_fmt, const char *refname) { - struct warn_if_dangling_data data = { fp, refname, msg_fmt }; + struct warn_if_dangling_data data; + + data.fp = fp; + data.refname = refname; + data.msg_fmt = msg_fmt; for_each_rawref(warn_if_dangling_symref, &data); } @@ -1258,52 +1262,65 @@ static int copy_msg(char *buf, const char *msg) return cp - buf; } -static int log_ref_write(const char *ref_name, const unsigned char *old_sha1, - const unsigned char *new_sha1, const char *msg) +int log_ref_setup(const char *ref_name, char *logfile, int bufsize) { - int logfd, written, oflags = O_APPEND | O_WRONLY; - unsigned maxlen, len; - int msglen; - char log_file[PATH_MAX]; - char *logrec; - const char *committer; - - if (log_all_ref_updates < 0) - log_all_ref_updates = !is_bare_repository(); - - git_snpath(log_file, sizeof(log_file), "logs/%s", ref_name); + int logfd, oflags = O_APPEND | O_WRONLY; + git_snpath(logfile, bufsize, "logs/%s", ref_name); if (log_all_ref_updates && (!prefixcmp(ref_name, "refs/heads/") || !prefixcmp(ref_name, "refs/remotes/") || !prefixcmp(ref_name, "refs/notes/") || !strcmp(ref_name, "HEAD"))) { - if (safe_create_leading_directories(log_file) < 0) + if (safe_create_leading_directories(logfile) < 0) return error("unable to create directory for %s", - log_file); + logfile); oflags |= O_CREAT; } - logfd = open(log_file, oflags, 0666); + logfd = open(logfile, oflags, 0666); if (logfd < 0) { if (!(oflags & O_CREAT) && errno == ENOENT) return 0; if ((oflags & O_CREAT) && errno == EISDIR) { - if (remove_empty_directories(log_file)) { + if (remove_empty_directories(logfile)) { return error("There are still logs under '%s'", - log_file); + logfile); } - logfd = open(log_file, oflags, 0666); + logfd = open(logfile, oflags, 0666); } if (logfd < 0) return error("Unable to append to %s: %s", - log_file, strerror(errno)); + logfile, strerror(errno)); } - adjust_shared_perm(log_file); + adjust_shared_perm(logfile); + close(logfd); + return 0; +} + +static int log_ref_write(const char *ref_name, const unsigned char *old_sha1, + const unsigned char *new_sha1, const char *msg) +{ + int logfd, result, written, oflags = O_APPEND | O_WRONLY; + unsigned maxlen, len; + int msglen; + char log_file[PATH_MAX]; + char *logrec; + const char *committer; + + if (log_all_ref_updates < 0) + log_all_ref_updates = !is_bare_repository(); + result = log_ref_setup(ref_name, log_file, sizeof(log_file)); + if (result) + return result; + + logfd = open(log_file, oflags); + if (logfd < 0) + return 0; msglen = msg ? strlen(msg) : 0; committer = git_committer_info(0); maxlen = strlen(committer) + msglen + 100; @@ -68,6 +68,9 @@ extern void unlock_ref(struct ref_lock *lock); /** Writes sha1 into the ref specified by the lock. **/ extern int write_ref_sha1(struct ref_lock *lock, const unsigned char *sha1, const char *msg); +/** Setup reflog before using. **/ +int log_ref_setup(const char *ref_name, char *logfile, int bufsize); + /** Reads log for the value of ref during at_time. **/ extern int read_ref_at(const char *ref, unsigned long at_time, int cnt, unsigned char *sha1, char **msg, unsigned long *cutoff_time, int *cutoff_tz, int *cutoff_cnt); @@ -478,7 +478,7 @@ static void read_config(void) unsigned char sha1[20]; const char *head_ref; int flag; - if (default_remote_name) // did this already + if (default_remote_name) /* did this already */ return; default_remote_name = xstrdup("origin"); current_branch = NULL; @@ -659,10 +659,9 @@ static struct refspec *parse_refspec_internal(int nr_refspec, const char **refsp int valid_fetch_refspec(const char *fetch_refspec_str) { - const char *fetch_refspec[] = { fetch_refspec_str }; struct refspec *refspec; - refspec = parse_refspec_internal(1, fetch_refspec, 1, 1); + refspec = parse_refspec_internal(1, &fetch_refspec_str, 1, 1); free_refspecs(refspec, 1); return !!refspec; } @@ -763,7 +762,7 @@ void ref_remove_duplicates(struct ref *ref_map) if (!ref_map->peer_ref) continue; - item = string_list_lookup(ref_map->peer_ref->name, &refs); + item = string_list_lookup(&refs, ref_map->peer_ref->name); if (item) { if (strcmp(((struct ref *)item->util)->name, ref_map->name)) @@ -778,7 +777,7 @@ void ref_remove_duplicates(struct ref *ref_map) continue; } - item = string_list_insert(ref_map->peer_ref->name, &refs); + item = string_list_insert(&refs, ref_map->peer_ref->name); item->util = ref_map; } string_list_clear(&refs, 0); @@ -1711,7 +1710,7 @@ struct ref *get_stale_heads(struct remote *remote, struct ref *fetch_map) info.ref_names = &ref_names; info.stale_refs_tail = &stale_refs; for (ref = fetch_map; ref; ref = ref->next) - string_list_append(ref->name, &ref_names); + string_list_append(&ref_names, ref->name); sort_string_list(&ref_names); for_each_ref(get_stale_heads_cb, &info); string_list_clear(&ref_names, 0); @@ -145,7 +145,7 @@ int branch_merge_matches(struct branch *, int n, const char *); enum match_refs_flags { MATCH_REFS_NONE = 0, MATCH_REFS_ALL = (1 << 0), - MATCH_REFS_MIRROR = (1 << 1), + MATCH_REFS_MIRROR = (1 << 1) }; /* Reporting of tracking info */ @@ -46,7 +46,7 @@ static void read_rr(struct string_list *rr) ; /* do nothing */ if (i == sizeof(buf)) die("filename too long"); - string_list_insert(buf, rr)->util = name; + string_list_insert(rr, buf)->util = name; } fclose(in); } @@ -153,7 +153,7 @@ static int handle_path(unsigned char *sha1, struct rerere_io *io, int marker_siz git_SHA_CTX ctx; int hunk_no = 0; enum { - RR_CONTEXT = 0, RR_SIDE_1, RR_SIDE_2, RR_ORIGINAL, + RR_CONTEXT = 0, RR_SIDE_1, RR_SIDE_2, RR_ORIGINAL } hunk = RR_CONTEXT; struct strbuf one = STRBUF_INIT, two = STRBUF_INIT; struct strbuf buf = STRBUF_INIT; @@ -354,7 +354,7 @@ static int find_conflict(struct string_list *conflict) ce_same_name(e2, e3) && S_ISREG(e2->ce_mode) && S_ISREG(e3->ce_mode)) { - string_list_insert((const char *)e2->name, conflict); + string_list_insert(conflict, (const char *)e2->name); i++; /* skip over both #2 and #3 */ } } @@ -449,7 +449,7 @@ static int do_plain_rerere(struct string_list *rr, int fd) if (ret < 1) continue; hex = xstrdup(sha1_to_hex(sha1)); - string_list_insert(path, rr)->util = hex; + string_list_insert(rr, path)->util = hex; if (mkdir(git_path("rr-cache/%s", hex), 0755)) continue; handle_file(path, NULL, rerere_path(hex, "preimage")); @@ -471,7 +471,7 @@ static int do_plain_rerere(struct string_list *rr, int fd) if (has_rerere_resolution(name)) { if (!merge(name, path)) { if (rerere_autoupdate) - string_list_insert(path, &update); + string_list_insert(&update, path); fprintf(stderr, "%s '%s' using previous resolution.\n", rerere_autoupdate @@ -577,7 +577,7 @@ static int rerere_forget_one_path(const char *path, struct string_list *rr) fprintf(stderr, "Updated preimage for '%s'\n", path); - string_list_insert(path, rr)->util = hex; + string_list_insert(rr, path)->util = hex; fprintf(stderr, "Forgot resolution for %s\n", path); return 0; } diff --git a/resolve-undo.c b/resolve-undo.c index 0f50ee0484..174ebec9e5 100644 --- a/resolve-undo.c +++ b/resolve-undo.c @@ -20,7 +20,7 @@ void record_resolve_undo(struct index_state *istate, struct cache_entry *ce) istate->resolve_undo = resolve_undo; } resolve_undo = istate->resolve_undo; - lost = string_list_insert(ce->name, resolve_undo); + lost = string_list_insert(resolve_undo, ce->name); if (!lost->util) lost->util = xcalloc(1, sizeof(*ui)); ui = lost->util; @@ -50,7 +50,7 @@ static int write_one(struct string_list_item *item, void *cbdata) void resolve_undo_write(struct strbuf *sb, struct string_list *resolve_undo) { - for_each_string_list(write_one, resolve_undo, sb); + for_each_string_list(resolve_undo, write_one, sb); } struct string_list *resolve_undo_read(const char *data, unsigned long size) @@ -70,7 +70,7 @@ struct string_list *resolve_undo_read(const char *data, unsigned long size) len = strlen(data) + 1; if (size <= len) goto error; - lost = string_list_insert(data, resolve_undo); + lost = string_list_insert(resolve_undo, data); if (!lost->util) lost->util = xcalloc(1, sizeof(*ui)); ui = lost->util; @@ -135,7 +135,7 @@ int unmerge_index_entry_at(struct index_state *istate, int pos) pos++; return pos - 1; /* return the last entry processed */ } - item = string_list_lookup(ce->name, istate->resolve_undo); + item = string_list_lookup(istate->resolve_undo, ce->name); if (!item) return pos; ru = item->util; diff --git a/revision.c b/revision.c index 7b881a83fd..7e82efd932 100644 --- a/revision.c +++ b/revision.c @@ -646,6 +646,93 @@ static int still_interesting(struct commit_list *src, unsigned long date, int sl return slop-1; } +/* + * "rev-list --ancestry-path A..B" computes commits that are ancestors + * of B but not ancestors of A but further limits the result to those + * that are descendants of A. This takes the list of bottom commits and + * the result of "A..B" without --ancestry-path, and limits the latter + * further to the ones that can reach one of the commits in "bottom". + */ +static void limit_to_ancestry(struct commit_list *bottom, struct commit_list *list) +{ + struct commit_list *p; + struct commit_list *rlist = NULL; + int made_progress; + + /* + * Reverse the list so that it will be likely that we would + * process parents before children. + */ + for (p = list; p; p = p->next) + commit_list_insert(p->item, &rlist); + + for (p = bottom; p; p = p->next) + p->item->object.flags |= TMP_MARK; + + /* + * Mark the ones that can reach bottom commits in "list", + * in a bottom-up fashion. + */ + do { + made_progress = 0; + for (p = rlist; p; p = p->next) { + struct commit *c = p->item; + struct commit_list *parents; + if (c->object.flags & (TMP_MARK | UNINTERESTING)) + continue; + for (parents = c->parents; + parents; + parents = parents->next) { + if (!(parents->item->object.flags & TMP_MARK)) + continue; + c->object.flags |= TMP_MARK; + made_progress = 1; + break; + } + } + } while (made_progress); + + /* + * NEEDSWORK: decide if we want to remove parents that are + * not marked with TMP_MARK from commit->parents for commits + * in the resulting list. We may not want to do that, though. + */ + + /* + * The ones that are not marked with TMP_MARK are uninteresting + */ + for (p = list; p; p = p->next) { + struct commit *c = p->item; + if (c->object.flags & TMP_MARK) + continue; + c->object.flags |= UNINTERESTING; + } + + /* We are done with the TMP_MARK */ + for (p = list; p; p = p->next) + p->item->object.flags &= ~TMP_MARK; + for (p = bottom; p; p = p->next) + p->item->object.flags &= ~TMP_MARK; + free_commit_list(rlist); +} + +/* + * Before walking the history, keep the set of "negative" refs the + * caller has asked to exclude. + * + * This is used to compute "rev-list --ancestry-path A..B", as we need + * to filter the result of "A..B" further to the ones that can actually + * reach A. + */ +static struct commit_list *collect_bottom_commits(struct commit_list *list) +{ + struct commit_list *elem, *bottom = NULL; + for (elem = list; elem; elem = elem->next) + if (elem->item->object.flags & UNINTERESTING) + commit_list_insert(elem->item, &bottom); + return bottom; +} + static int limit_list(struct rev_info *revs) { int slop = SLOP; @@ -653,6 +740,13 @@ static int limit_list(struct rev_info *revs) struct commit_list *list = revs->commits; struct commit_list *newlist = NULL; struct commit_list **p = &newlist; + struct commit_list *bottom = NULL; + + if (revs->ancestry_path) { + bottom = collect_bottom_commits(list); + if (!bottom) + die("--ancestry-path given but there are no bottom commits"); + } while (list) { struct commit_list *entry = list; @@ -694,6 +788,11 @@ static int limit_list(struct rev_info *revs) if (revs->cherry_pick) cherry_pick_list(newlist, revs); + if (bottom) { + limit_to_ancestry(bottom, newlist); + free_commit_list(bottom); + } + revs->commits = newlist; return 0; } @@ -1093,6 +1192,10 @@ static int handle_revision_opt(struct rev_info *revs, int argc, const char **arg revs->min_age = approxidate(arg + 8); } else if (!strcmp(arg, "--first-parent")) { revs->first_parent_only = 1; + } else if (!strcmp(arg, "--ancestry-path")) { + revs->ancestry_path = 1; + revs->simplify_history = 0; + revs->limited = 1; } else if (!strcmp(arg, "-g") || !strcmp(arg, "--walk-reflogs")) { init_reflog_walk(&revs->reflog_info); } else if (!strcmp(arg, "--default")) { @@ -1150,6 +1253,8 @@ static int handle_revision_opt(struct rev_info *revs, int argc, const char **arg revs->boundary = 1; } else if (!strcmp(arg, "--left-right")) { revs->left_right = 1; + } else if (!strcmp(arg, "--count")) { + revs->count = 1; } else if (!strcmp(arg, "--cherry-pick")) { revs->cherry_pick = 1; revs->limited = 1; @@ -1209,8 +1314,8 @@ static int handle_revision_opt(struct rev_info *revs, int argc, const char **arg else strbuf_addstr(&buf, "refs/notes/"); strbuf_addstr(&buf, arg+13); - string_list_append(strbuf_detach(&buf, NULL), - revs->notes_opt.extra_notes_refs); + string_list_append(revs->notes_opt.extra_notes_refs, + strbuf_detach(&buf, NULL)); } else if (!strcmp(arg, "--no-notes")) { revs->show_notes = 0; revs->show_notes_given = 1; @@ -1785,7 +1890,7 @@ int prepare_revision_walk(struct rev_info *revs) enum rewrite_result { rewrite_one_ok, rewrite_one_noparents, - rewrite_one_error, + rewrite_one_error }; static enum rewrite_result rewrite_one(struct rev_info *revs, struct commit **pp) diff --git a/revision.h b/revision.h index 568f1c98de..36fdf22b29 100644 --- a/revision.h +++ b/revision.h @@ -57,6 +57,7 @@ struct rev_info { limited:1, unpacked:1, boundary:2, + count:1, left_right:1, rewrite_parents:1, print_parents:1, @@ -66,6 +67,7 @@ struct rev_info { reverse_output_stage:1, cherry_pick:1, bisect:1, + ancestry_path:1, first_parent_only:1; /* Diff flags */ @@ -131,6 +133,10 @@ struct rev_info { /* notes-specific options: which refs to show */ struct display_notes_opt notes_opt; + + /* commit counts */ + int count_left; + int count_right; }; #define REV_TREE_SAME 0 diff --git a/run-command.c b/run-command.c index c7793f50fb..2a1041ef65 100644 --- a/run-command.c +++ b/run-command.c @@ -84,6 +84,7 @@ static NORETURN void die_child(const char *err, va_list params) unused = write(child_err, "\n", 1); exit(128); } +#endif static inline void set_cloexec(int fd) { @@ -91,7 +92,6 @@ static inline void set_cloexec(int fd) if (flags >= 0) fcntl(fd, F_SETFD, flags | FD_CLOEXEC); } -#endif static int wait_or_whine(pid_t pid, const char *argv0, int silent_exec_failure) { @@ -449,11 +449,35 @@ int run_command_v_opt_cd_env(const char **argv, int opt, const char *dir, const return run_command(&cmd); } -#ifdef WIN32 -static unsigned __stdcall run_thread(void *data) +#ifndef NO_PTHREADS +static pthread_t main_thread; +static int main_thread_set; +static pthread_key_t async_key; + +static void *run_thread(void *data) { struct async *async = data; - return async->proc(async->proc_in, async->proc_out, async->data); + intptr_t ret; + + pthread_setspecific(async_key, async); + ret = async->proc(async->proc_in, async->proc_out, async->data); + return (void *)ret; +} + +static NORETURN void die_async(const char *err, va_list params) +{ + vreportf("fatal: ", err, params); + + if (!pthread_equal(main_thread, pthread_self())) { + struct async *async = pthread_getspecific(async_key); + if (async->proc_in >= 0) + close(async->proc_in); + if (async->proc_out >= 0) + close(async->proc_out); + pthread_exit((void *)128); + } + + exit(128); } #endif @@ -499,7 +523,7 @@ int start_async(struct async *async) else proc_out = -1; -#ifndef WIN32 +#ifdef NO_PTHREADS /* Flush stdio before fork() to avoid cloning buffers */ fflush(NULL); @@ -526,12 +550,29 @@ int start_async(struct async *async) else if (async->out) close(async->out); #else + if (!main_thread_set) { + /* + * We assume that the first time that start_async is called + * it is from the main thread. + */ + main_thread_set = 1; + main_thread = pthread_self(); + pthread_key_create(&async_key, NULL); + set_die_routine(die_async); + } + + if (proc_in >= 0) + set_cloexec(proc_in); + if (proc_out >= 0) + set_cloexec(proc_out); async->proc_in = proc_in; async->proc_out = proc_out; - async->tid = (HANDLE) _beginthreadex(NULL, 0, run_thread, async, 0, NULL); - if (!async->tid) { - error("cannot create thread: %s", strerror(errno)); - goto error; + { + int err = pthread_create(&async->tid, NULL, run_thread, async); + if (err) { + error("cannot create thread: %s", strerror(err)); + goto error; + } } #endif return 0; @@ -551,17 +592,15 @@ error: int finish_async(struct async *async) { -#ifndef WIN32 - int ret = wait_or_whine(async->pid, "child process", 0); +#ifdef NO_PTHREADS + return wait_or_whine(async->pid, "child process", 0); #else - DWORD ret = 0; - if (WaitForSingleObject(async->tid, INFINITE) != WAIT_OBJECT_0) - ret = error("waiting for thread failed: %lu", GetLastError()); - else if (!GetExitCodeThread(async->tid, &ret)) - ret = error("cannot get thread exit code: %lu", GetLastError()); - CloseHandle(async->tid); + void *ret = (void *)(intptr_t)(-1); + + if (pthread_join(async->tid, &ret)) + error("pthread_join failed"); + return (int)(intptr_t)ret; #endif - return ret; } int run_hook(const char *index_file, const char *name, ...) diff --git a/run-command.h b/run-command.h index 94619f52d9..56491b9f23 100644 --- a/run-command.h +++ b/run-command.h @@ -1,6 +1,10 @@ #ifndef RUN_COMMAND_H #define RUN_COMMAND_H +#ifndef NO_PTHREADS +#include <pthread.h> +#endif + struct child_process { const char **argv; pid_t pid; @@ -74,10 +78,10 @@ struct async { void *data; int in; /* caller writes here and closes it */ int out; /* caller reads from here and closes it */ -#ifndef WIN32 +#ifdef NO_PTHREADS pid_t pid; #else - HANDLE tid; + pthread_t tid; int proc_in; int proc_out; #endif @@ -546,6 +546,12 @@ int check_repository_format(void) return check_repository_format_gently(NULL); } +/* + * Returns the "prefix", a path to the current working directory + * relative to the work tree root, or NULL, if the current working + * directory is not a strict subdirectory of the work tree root. The + * prefix always ends with a '/' character. + */ const char *setup_git_directory(void) { const char *retval = setup_git_directory_gently(NULL); diff --git a/sha1_file.c b/sha1_file.c index d8e61a65d1..e42ef96d45 100644 --- a/sha1_file.c +++ b/sha1_file.c @@ -102,20 +102,22 @@ static void fill_sha1_path(char *pathbuf, const unsigned char *sha1) */ char *sha1_file_name(const unsigned char *sha1) { - static char *name, *base; + static char buf[PATH_MAX]; + const char *objdir; + int len; - if (!base) { - const char *sha1_file_directory = get_object_directory(); - int len = strlen(sha1_file_directory); - base = xmalloc(len + 60); - memcpy(base, sha1_file_directory, len); - memset(base+len, 0, 60); - base[len] = '/'; - base[len+3] = '/'; - name = base + len + 1; - } - fill_sha1_path(name, sha1); - return base; + objdir = get_object_directory(); + len = strlen(objdir); + + /* '/' + sha1(2) + '/' + sha1(38) + '\0' */ + if (len + 43 > PATH_MAX) + die("insanely long object directory %s", objdir); + memcpy(buf, objdir, len); + buf[len] = '/'; + buf[len+3] = '/'; + buf[len+42] = '\0'; + fill_sha1_path(buf + len + 1, sha1); + return buf; } static char *sha1_get_pack_name(const unsigned char *sha1, diff --git a/sha1_name.c b/sha1_name.c index bf92417838..4f2af8da93 100644 --- a/sha1_name.c +++ b/sha1_name.c @@ -679,8 +679,8 @@ static int handle_one_ref(const char *path, /* * This interprets names like ':/Initial revision of "git"' by searching - * through history and returning the first commit whose message starts - * with the given string. + * through history and returning the first commit whose message matches + * the given regular expression. * * For future extension, ':/!' is reserved. If you want to match a message * beginning with a '!', you have to repeat the exclamation mark. @@ -692,12 +692,17 @@ static int get_sha1_oneline(const char *prefix, unsigned char *sha1) struct commit_list *list = NULL, *backup = NULL, *l; int retval = -1; char *temp_commit_buffer = NULL; + regex_t regex; if (prefix[0] == '!') { if (prefix[1] != '!') die ("Invalid search pattern: %s", prefix); prefix++; } + + if (regcomp(®ex, prefix, REG_EXTENDED)) + die("Invalid search pattern: %s", prefix); + for_each_ref(handle_one_ref, &list); for (l = list; l; l = l->next) commit_list_insert(l->item, &backup); @@ -721,12 +726,13 @@ static int get_sha1_oneline(const char *prefix, unsigned char *sha1) } if (!(p = strstr(p, "\n\n"))) continue; - if (!prefixcmp(p + 2, prefix)) { + if (!regexec(®ex, p + 2, 0, NULL, 0)) { hashcpy(sha1, commit->object.sha1); retval = 0; break; } } + regfree(®ex); free(temp_commit_buffer); free_commit_list(list); for (l = backup; l; l = l->next) @@ -933,8 +939,8 @@ int interpret_branch_name(const char *name, struct strbuf *buf) */ int get_sha1(const char *name, unsigned char *sha1) { - unsigned unused; - return get_sha1_with_mode(name, sha1, &unused); + struct object_context unused; + return get_sha1_with_context(name, sha1, &unused); } /* Must be called only when object_name:filename doesn't exist. */ @@ -1032,11 +1038,23 @@ static void diagnose_invalid_index_path(int stage, int get_sha1_with_mode_1(const char *name, unsigned char *sha1, unsigned *mode, int gently, const char *prefix) { + struct object_context oc; + int ret; + ret = get_sha1_with_context_1(name, sha1, &oc, gently, prefix); + *mode = oc.mode; + return ret; +} + +int get_sha1_with_context_1(const char *name, unsigned char *sha1, + struct object_context *oc, + int gently, const char *prefix) +{ int ret, bracket_depth; int namelen = strlen(name); const char *cp; - *mode = S_IFINVALID; + memset(oc, 0, sizeof(*oc)); + oc->mode = S_IFINVALID; ret = get_sha1_1(name, namelen, sha1); if (!ret) return ret; @@ -1059,6 +1077,11 @@ int get_sha1_with_mode_1(const char *name, unsigned char *sha1, unsigned *mode, cp = name + 3; } namelen = namelen - (cp - name); + + strncpy(oc->path, cp, + sizeof(oc->path)); + oc->path[sizeof(oc->path)-1] = '\0'; + if (!active_cache) read_cache(); pos = cache_name_pos(cp, namelen); @@ -1071,7 +1094,6 @@ int get_sha1_with_mode_1(const char *name, unsigned char *sha1, unsigned *mode, break; if (ce_stage(ce) == stage) { hashcpy(sha1, ce->sha1); - *mode = ce->ce_mode; return 0; } pos++; @@ -1098,12 +1120,17 @@ int get_sha1_with_mode_1(const char *name, unsigned char *sha1, unsigned *mode, } if (!get_sha1_1(name, cp-name, tree_sha1)) { const char *filename = cp+1; - ret = get_tree_entry(tree_sha1, filename, sha1, mode); + ret = get_tree_entry(tree_sha1, filename, sha1, &oc->mode); if (!gently) { diagnose_invalid_sha1_path(prefix, filename, tree_sha1, object_name); free(object_name); } + hashcpy(oc->tree, tree_sha1); + strncpy(oc->path, filename, + sizeof(oc->path)); + oc->path[sizeof(oc->path)-1] = '\0'; + return ret; } else { if (!gently) diff --git a/string-list.c b/string-list.c index c9ad7fcd49..9b023a2584 100644 --- a/string-list.c +++ b/string-list.c @@ -51,13 +51,13 @@ static int add_entry(int insert_at, struct string_list *list, const char *string return index; } -struct string_list_item *string_list_insert(const char *string, struct string_list *list) +struct string_list_item *string_list_insert(struct string_list *list, const char *string) { - return string_list_insert_at_index(-1, string, list); + return string_list_insert_at_index(list, -1, string); } -struct string_list_item *string_list_insert_at_index(int insert_at, - const char *string, struct string_list *list) +struct string_list_item *string_list_insert_at_index(struct string_list *list, + int insert_at, const char *string) { int index = add_entry(insert_at, list, string); @@ -84,7 +84,7 @@ int string_list_find_insert_index(const struct string_list *list, const char *st return index; } -struct string_list_item *string_list_lookup(const char *string, struct string_list *list) +struct string_list_item *string_list_lookup(struct string_list *list, const char *string) { int exact_match, i = get_entry_index(list, string, &exact_match); if (!exact_match) @@ -92,8 +92,8 @@ struct string_list_item *string_list_lookup(const char *string, struct string_li return list->items + i; } -int for_each_string_list(string_list_each_func_t fn, - struct string_list *list, void *cb_data) +int for_each_string_list(struct string_list *list, + string_list_each_func_t fn, void *cb_data) { int i, ret = 0; for (i = 0; i < list->nr; i++) @@ -139,7 +139,7 @@ void string_list_clear_func(struct string_list *list, string_list_clear_func_t c } -void print_string_list(const char *text, const struct string_list *p) +void print_string_list(const struct string_list *p, const char *text) { int i; if ( text ) @@ -148,7 +148,7 @@ void print_string_list(const char *text, const struct string_list *p) printf("%s:%p\n", p->items[i].string, p->items[i].util); } -struct string_list_item *string_list_append(const char *string, struct string_list *list) +struct string_list_item *string_list_append(struct string_list *list, const char *string) { ALLOC_GROW(list->items, list->nr + 1, list->alloc); list->items[list->nr].string = diff --git a/string-list.h b/string-list.h index 63b69c8d75..680d600d16 100644 --- a/string-list.h +++ b/string-list.h @@ -12,7 +12,7 @@ struct string_list unsigned int strdup_strings:1; }; -void print_string_list(const char *text, const struct string_list *p); +void print_string_list(const struct string_list *p, const char *text); void string_list_clear(struct string_list *list, int free_util); /* Use this function to call a custom clear function on each util pointer */ @@ -22,20 +22,20 @@ void string_list_clear_func(struct string_list *list, string_list_clear_func_t c /* Use this function to iterate over each item */ typedef int (*string_list_each_func_t)(struct string_list_item *, void *); -int for_each_string_list(string_list_each_func_t, - struct string_list *list, void *cb_data); +int for_each_string_list(struct string_list *list, + string_list_each_func_t, void *cb_data); /* Use these functions only on sorted lists: */ int string_list_has_string(const struct string_list *list, const char *string); int string_list_find_insert_index(const struct string_list *list, const char *string, int negative_existing_index); -struct string_list_item *string_list_insert(const char *string, struct string_list *list); -struct string_list_item *string_list_insert_at_index(int insert_at, - const char *string, struct string_list *list); -struct string_list_item *string_list_lookup(const char *string, struct string_list *list); +struct string_list_item *string_list_insert(struct string_list *list, const char *string); +struct string_list_item *string_list_insert_at_index(struct string_list *list, + int insert_at, const char *string); +struct string_list_item *string_list_lookup(struct string_list *list, const char *string); /* Use these functions only on unsorted lists: */ -struct string_list_item *string_list_append(const char *string, struct string_list *list); +struct string_list_item *string_list_append(struct string_list *list, const char *string); void sort_string_list(struct string_list *list); int unsorted_string_list_has_string(struct string_list *list, const char *string); struct string_list_item *unsorted_string_list_lookup(struct string_list *list, diff --git a/submodule.c b/submodule.c index 676d48fb33..61cb6e21dd 100644 --- a/submodule.c +++ b/submodule.c @@ -46,6 +46,19 @@ done: return ret; } +void handle_ignore_submodules_arg(struct diff_options *diffopt, + const char *arg) +{ + if (!strcmp(arg, "all")) + DIFF_OPT_SET(diffopt, IGNORE_SUBMODULES); + else if (!strcmp(arg, "untracked")) + DIFF_OPT_SET(diffopt, IGNORE_UNTRACKED_IN_SUBMODULES); + else if (!strcmp(arg, "dirty")) + DIFF_OPT_SET(diffopt, IGNORE_DIRTY_SUBMODULES); + else + die("bad --ignore-submodules argument: %s", arg); +} + void show_submodule_summary(FILE *f, const char *path, unsigned char one[20], unsigned char two[20], unsigned dirty_submodule, diff --git a/submodule.h b/submodule.h index dbda270873..6fd3bb4070 100644 --- a/submodule.h +++ b/submodule.h @@ -1,6 +1,9 @@ #ifndef SUBMODULE_H #define SUBMODULE_H +struct diff_options; + +void handle_ignore_submodules_arg(struct diff_options *diffopt, const char *); void show_submodule_summary(FILE *f, const char *path, unsigned char one[20], unsigned char two[20], unsigned dirty_submodule, diff --git a/t/Makefile b/t/Makefile index 25c559bb49..f9de24b4d2 100644 --- a/t/Makefile +++ b/t/Makefile @@ -3,6 +3,7 @@ # Copyright (c) 2005 Junio C Hamano # +-include ../config.mak.autogen -include ../config.mak #GIT_TEST_OPTS=--verbose --debug @@ -35,7 +36,9 @@ aggregate-results-and-cleanup: $(T) $(MAKE) clean aggregate-results: - '$(SHELL_PATH_SQ)' ./aggregate-results.sh test-results/t*-* + for f in test-results/t*-*; do \ + echo "$$f"; \ + done | '$(SHELL_PATH_SQ)' ./aggregate-results.sh # we can test NO_OPTIMIZE_COMMITS independently of LC_ALL full-svn-test: @@ -84,6 +84,12 @@ appropriately before running "make". implied by other options like --valgrind and GIT_TEST_INSTALLED. +--root=<directory>:: + Create "trash" directories used to store all temporary data during + testing under <directory>, instead of the t/ directory. + Using this option with a RAM-based filesystem (such as tmpfs) + can massively speed up the test suite. + You can also set the GIT_TEST_INSTALLED environment variable to the bindir of an existing git installation to test that installation. You still need to have built this git sandbox, from which various diff --git a/t/aggregate-results.sh b/t/aggregate-results.sh index d5bab75d7d..d206b7c4cf 100755 --- a/t/aggregate-results.sh +++ b/t/aggregate-results.sh @@ -6,7 +6,7 @@ failed=0 broken=0 total=0 -for file +while read file do while read type value do diff --git a/t/gitweb-lib.sh b/t/gitweb-lib.sh index 5a734b1b7b..b70b891b62 100644 --- a/t/gitweb-lib.sh +++ b/t/gitweb-lib.sh @@ -19,9 +19,9 @@ our \$site_name = '[localhost]'; our \$site_header = ''; our \$site_footer = ''; our \$home_text = 'indextext.html'; -our @stylesheets = ('file:///$TEST_DIRECTORY/../gitweb/gitweb.css'); -our \$logo = 'file:///$TEST_DIRECTORY/../gitweb/git-logo.png'; -our \$favicon = 'file:///$TEST_DIRECTORY/../gitweb/git-favicon.png'; +our @stylesheets = ('file:///$TEST_DIRECTORY/../gitweb/static/gitweb.css'); +our \$logo = 'file:///$TEST_DIRECTORY/../gitweb/static/git-logo.png'; +our \$favicon = 'file:///$TEST_DIRECTORY/../gitweb/static/git-favicon.png'; our \$projects_list = ''; our \$export_ok = ''; our \$strict_export = ''; diff --git a/t/lib-pager.sh b/t/lib-pager.sh new file mode 100644 index 0000000000..ba03eab14f --- /dev/null +++ b/t/lib-pager.sh @@ -0,0 +1,15 @@ +#!/bin/sh + +test_expect_success 'determine default pager' ' + test_might_fail git config --unset core.pager && + less=$( + unset PAGER GIT_PAGER; + git var GIT_PAGER + ) && + test -n "$less" +' + +if expr "$less" : '[a-z][a-z]*$' >/dev/null +then + test_set_prereq SIMPLEPAGER +fi diff --git a/t/t6000lib.sh b/t/lib-t6000.sh index 985d517a1c..ea25dd89e5 100644 --- a/t/t6000lib.sh +++ b/t/lib-t6000.sh @@ -91,7 +91,7 @@ check_output() shift 1 if eval "$*" | entag > $_name.actual then - diff $_name.expected $_name.actual + test_cmp $_name.expected $_name.actual else return 1; fi diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index 3ec9cbef2c..f2c73369a5 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -301,7 +301,7 @@ $expectfilter >expected <<\EOF EOF test_expect_success \ 'validate git diff-files output for a know cache/work tree state.' \ - 'git diff-files >current && diff >/dev/null -b current expected' + 'git diff-files >current && test_cmp current expected >/dev/null' test_expect_success \ 'git update-index --refresh should succeed.' \ diff --git a/t/t0020-crlf.sh b/t/t0020-crlf.sh index c3e7e322a8..234a94f3e6 100755 --- a/t/t0020-crlf.sh +++ b/t/t0020-crlf.sh @@ -453,5 +453,57 @@ test_expect_success 'invalid .gitattributes (must not crash)' ' git diff ' +# Some more tests here to add new autocrlf functionality. +# We want to have a known state here, so start a bit from scratch + +test_expect_success 'setting up for new autocrlf tests' ' + git config core.autocrlf false && + git config core.safecrlf false && + rm -rf .????* * && + for w in I am all LF; do echo $w; done >alllf && + for w in Oh here is CRLFQ in text; do echo $w; done | q_to_cr >mixed && + for w in I am all CRLF; do echo $w; done | append_cr >allcrlf && + git add -A . && + git commit -m "alllf, allcrlf and mixed only" && + git tag -a -m "message" autocrlf-checkpoint +' + +test_expect_success 'report no change after setting autocrlf' ' + git config core.autocrlf true && + touch * && + git diff --exit-code +' + +test_expect_success 'files are clean after checkout' ' + rm * && + git checkout -f && + git diff --exit-code +' + +cr_to_Q_no_NL () { + tr '\015' Q | tr -d '\012' +} + +test_expect_success 'LF only file gets CRLF with autocrlf' ' + test "$(cr_to_Q_no_NL < alllf)" = "IQamQallQLFQ" +' + +test_expect_success 'Mixed file is still mixed with autocrlf' ' + test "$(cr_to_Q_no_NL < mixed)" = "OhhereisCRLFQintext" +' + +test_expect_success 'CRLF only file has CRLF with autocrlf' ' + test "$(cr_to_Q_no_NL < allcrlf)" = "IQamQallQCRLFQ" +' + +test_expect_success 'New CRLF file gets LF in repo' ' + tr -d "\015" < alllf | append_cr > alllf2 && + git add alllf2 && + git commit -m "alllf2 added" && + git config core.autocrlf false && + rm * && + git checkout -f && + test_cmp alllf alllf2 +' test_done diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index 6cb8d60ea2..828e35baf7 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -65,17 +65,21 @@ test_expect_success expanded_in_repo ' echo "\$Id:NoSpaceAtFront \$" echo "\$Id:NoSpaceAtEitherEnd\$" echo "\$Id: NoTerminatingSymbol" + echo "\$Id: Foreign Commit With Spaces \$" + echo "\$Id: NoTerminatingSymbolAtEOF" } > expanded-keywords && { echo "File with expanded keywords" - echo "\$Id: 4f21723e7b15065df7de95bd46c8ba6fb1818f4c \$" - echo "\$Id: 4f21723e7b15065df7de95bd46c8ba6fb1818f4c \$" - echo "\$Id: 4f21723e7b15065df7de95bd46c8ba6fb1818f4c \$" - echo "\$Id: 4f21723e7b15065df7de95bd46c8ba6fb1818f4c \$" - echo "\$Id: 4f21723e7b15065df7de95bd46c8ba6fb1818f4c \$" - echo "\$Id: 4f21723e7b15065df7de95bd46c8ba6fb1818f4c \$" + echo "\$Id: fd0478f5f1486f3d5177d4c3f6eb2765e8fc56b9 \$" + echo "\$Id: fd0478f5f1486f3d5177d4c3f6eb2765e8fc56b9 \$" + echo "\$Id: fd0478f5f1486f3d5177d4c3f6eb2765e8fc56b9 \$" + echo "\$Id: fd0478f5f1486f3d5177d4c3f6eb2765e8fc56b9 \$" + echo "\$Id: fd0478f5f1486f3d5177d4c3f6eb2765e8fc56b9 \$" + echo "\$Id: fd0478f5f1486f3d5177d4c3f6eb2765e8fc56b9 \$" echo "\$Id: NoTerminatingSymbol" + echo "\$Id: Foreign Commit With Spaces \$" + echo "\$Id: NoTerminatingSymbolAtEOF" } > expected-output && git add expanded-keywords && diff --git a/t/t0025-crlf-auto.sh b/t/t0025-crlf-auto.sh new file mode 100755 index 0000000000..f5f67a6337 --- /dev/null +++ b/t/t0025-crlf-auto.sh @@ -0,0 +1,155 @@ +#!/bin/sh + +test_description='CRLF conversion' + +. ./test-lib.sh + +has_cr() { + tr '\015' Q <"$1" | grep Q >/dev/null +} + +test_expect_success setup ' + + git config core.autocrlf false && + + for w in Hello world how are you; do echo $w; done >one && + for w in I am very very fine thank you; do echo ${w}Q; done | q_to_cr >two && + for w in Oh here is a QNUL byte how alarming; do echo ${w}; done | q_to_nul >three && + git add . && + + git commit -m initial && + + one=`git rev-parse HEAD:one` && + two=`git rev-parse HEAD:two` && + three=`git rev-parse HEAD:three` && + + echo happy. +' + +test_expect_success 'default settings cause no changes' ' + + rm -f .gitattributes tmp one two three && + git read-tree --reset -u HEAD && + + ! has_cr one && + has_cr two && + onediff=`git diff one` && + twodiff=`git diff two` && + threediff=`git diff three` && + test -z "$onediff" -a -z "$twodiff" -a -z "$threediff" +' + +test_expect_success 'crlf=true causes a CRLF file to be normalized' ' + + # Backwards compatibility check + rm -f .gitattributes tmp one two three && + echo "two crlf" > .gitattributes && + git read-tree --reset -u HEAD && + + # Note, "normalized" means that git will normalize it if added + has_cr two && + twodiff=`git diff two` && + test -n "$twodiff" +' + +test_expect_success 'text=true causes a CRLF file to be normalized' ' + + rm -f .gitattributes tmp one two three && + echo "two text" > .gitattributes && + git read-tree --reset -u HEAD && + + # Note, "normalized" means that git will normalize it if added + has_cr two && + twodiff=`git diff two` && + test -n "$twodiff" +' + +test_expect_success 'eol=crlf gives a normalized file CRLFs with autocrlf=false' ' + + rm -f .gitattributes tmp one two three && + git config core.autocrlf false && + echo "one eol=crlf" > .gitattributes && + git read-tree --reset -u HEAD && + + has_cr one && + onediff=`git diff one` && + test -z "$onediff" +' + +test_expect_success 'eol=crlf gives a normalized file CRLFs with autocrlf=input' ' + + rm -f .gitattributes tmp one two three && + git config core.autocrlf input && + echo "one eol=crlf" > .gitattributes && + git read-tree --reset -u HEAD && + + has_cr one && + onediff=`git diff one` && + test -z "$onediff" +' + +test_expect_success 'eol=lf gives a normalized file LFs with autocrlf=true' ' + + rm -f .gitattributes tmp one two three && + git config core.autocrlf true && + echo "one eol=lf" > .gitattributes && + git read-tree --reset -u HEAD && + + ! has_cr one && + onediff=`git diff one` && + test -z "$onediff" +' + +test_expect_success 'autocrlf=true does not normalize CRLF files' ' + + rm -f .gitattributes tmp one two three && + git config core.autocrlf true && + git read-tree --reset -u HEAD && + + has_cr one && + has_cr two && + onediff=`git diff one` && + twodiff=`git diff two` && + threediff=`git diff three` && + test -z "$onediff" -a -z "$twodiff" -a -z "$threediff" +' + +test_expect_success 'text=auto, autocrlf=true _does_ normalize CRLF files' ' + + rm -f .gitattributes tmp one two three && + git config core.autocrlf true && + echo "* text=auto" > .gitattributes && + git read-tree --reset -u HEAD && + + has_cr one && + has_cr two && + onediff=`git diff one` && + twodiff=`git diff two` && + threediff=`git diff three` && + test -z "$onediff" -a -n "$twodiff" -a -z "$threediff" +' + +test_expect_success 'text=auto, autocrlf=true does not normalize binary files' ' + + rm -f .gitattributes tmp one two three && + git config core.autocrlf true && + echo "* text=auto" > .gitattributes && + git read-tree --reset -u HEAD && + + ! has_cr three && + threediff=`git diff three` && + test -z "$threediff" +' + +test_expect_success 'eol=crlf _does_ normalize binary files' ' + + rm -f .gitattributes tmp one two three && + echo "three eol=crlf" > .gitattributes && + git read-tree --reset -u HEAD && + + has_cr three && + threediff=`git diff three` && + test -z "$threediff" +' + +test_done diff --git a/t/t0026-eol-config.sh b/t/t0026-eol-config.sh new file mode 100755 index 0000000000..f37ac8fa0b --- /dev/null +++ b/t/t0026-eol-config.sh @@ -0,0 +1,83 @@ +#!/bin/sh + +test_description='CRLF conversion' + +. ./test-lib.sh + +has_cr() { + tr '\015' Q <"$1" | grep Q >/dev/null +} + +test_expect_success setup ' + + git config core.autocrlf false && + + echo "one text" > .gitattributes + + for w in Hello world how are you; do echo $w; done >one && + for w in I am very very fine thank you; do echo $w; done >two && + git add . && + + git commit -m initial && + + one=`git rev-parse HEAD:one` && + two=`git rev-parse HEAD:two` && + + echo happy. +' + +test_expect_success 'eol=lf puts LFs in normalized file' ' + + rm -f .gitattributes tmp one two && + git config core.eol lf && + git read-tree --reset -u HEAD && + + ! has_cr one && + ! has_cr two && + onediff=`git diff one` && + twodiff=`git diff two` && + test -z "$onediff" -a -z "$twodiff" +' + +test_expect_success 'eol=crlf puts CRLFs in normalized file' ' + + rm -f .gitattributes tmp one two && + git config core.eol crlf && + git read-tree --reset -u HEAD && + + has_cr one && + ! has_cr two && + onediff=`git diff one` && + twodiff=`git diff two` && + test -z "$onediff" -a -z "$twodiff" +' + +test_expect_success 'autocrlf=true overrides eol=lf' ' + + rm -f .gitattributes tmp one two && + git config core.eol lf && + git config core.autocrlf true && + git read-tree --reset -u HEAD && + + has_cr one && + has_cr two && + onediff=`git diff one` && + twodiff=`git diff two` && + test -z "$onediff" -a -z "$twodiff" +' + +test_expect_success 'autocrlf=true overrides unset eol' ' + + rm -f .gitattributes tmp one two && + git config --unset-all core.eol && + git config core.autocrlf true && + git read-tree --reset -u HEAD && + + has_cr one && + has_cr two && + onediff=`git diff one` && + twodiff=`git diff two` && + test -z "$onediff" -a -z "$twodiff" +' + +test_done diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index 3d450ed379..20924506af 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -7,7 +7,7 @@ test_description='our own option parser' . ./test-lib.sh -cat > expect.err << EOF +cat > expect << EOF usage: test-parse-options <options> -b, --boolean get a boolean @@ -46,10 +46,12 @@ EOF test_expect_success 'test help' ' test_must_fail test-parse-options -h > output 2> output.err && - test ! -s output && - test_cmp expect.err output.err + test ! -s output.err && + test_cmp expect output ' +mv expect expect.err + cat > expect << EOF boolean: 2 integer: 1729 diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index 22a80c8268..759cf12e16 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -5,7 +5,9 @@ test_description='git fsck random collection of tests' . ./test-lib.sh test_expect_success setup ' + git config i18n.commitencoding ISO-8859-1 && test_commit A fileA one && + git config --unset i18n.commitencoding && git checkout HEAD^0 && test_commit B fileB two && git tag -d A B && @@ -28,6 +30,12 @@ test_expect_success 'loose objects borrowed from alternate are not missing' ' ) ' +test_expect_success 'valid objects appear valid' ' + { git fsck 2>out; true; } && + ! grep error out && + ! grep fatal out +' + # Corruption tests follow. Make sure to remove all traces of the # specific corruption you test afterwards, lest a later test trip over # it. diff --git a/t/t1502-rev-parse-parseopt.sh b/t/t1502-rev-parse-parseopt.sh index e504058062..4346795855 100755 --- a/t/t1502-rev-parse-parseopt.sh +++ b/t/t1502-rev-parse-parseopt.sh @@ -3,7 +3,8 @@ test_description='test git rev-parse --parseopt' . ./test-lib.sh -cat > expect.err <<EOF +cat > expect <<\END_EXPECT +cat <<\EOF usage: some-command [options] <args>... some-command does foo and bar! @@ -19,6 +20,7 @@ Extras --extra1 line above used to cause a segfault but no longer does EOF +END_EXPECT cat > optionspec << EOF some-command [options] <args>... @@ -38,8 +40,8 @@ extra1 line above used to cause a segfault but no longer does EOF test_expect_success 'test --parseopt help output' ' - git rev-parse --parseopt -- -h 2> output.err < optionspec - test_cmp expect.err output.err + git rev-parse --parseopt -- -h > output < optionspec + test_cmp expect output ' cat > expect <<EOF diff --git a/t/t2007-checkout-symlink.sh b/t/t2007-checkout-symlink.sh index 20f33436d0..27e2127afe 100755 --- a/t/t2007-checkout-symlink.sh +++ b/t/t2007-checkout-symlink.sh @@ -44,8 +44,10 @@ test_expect_success 'switch from symlink to dir' ' ' -rm -fr frotz xyzzy nitfol && -git checkout -f master || exit +test_expect_success 'Remove temporary directories & switch to master' ' + rm -fr frotz xyzzy nitfol && + git checkout -f master +' test_expect_success 'switch from dir to symlink' ' diff --git a/t/t2017-checkout-orphan.sh b/t/t2017-checkout-orphan.sh index a8297c61bd..be88d4b5ee 100755 --- a/t/t2017-checkout-orphan.sh +++ b/t/t2017-checkout-orphan.sh @@ -49,6 +49,62 @@ test_expect_success '--orphan must be rejected with -b' ' test refs/heads/master = "$(git symbolic-ref HEAD)" ' +test_expect_success '--orphan must be rejected with -t' ' + git checkout master && + test_must_fail git checkout --orphan new -t master && + test refs/heads/master = "$(git symbolic-ref HEAD)" +' + +test_expect_success '--orphan ignores branch.autosetupmerge' ' + git checkout master && + git config branch.autosetupmerge always && + git checkout --orphan gamma && + test -z "$(git config branch.gamma.merge)" && + test refs/heads/gamma = "$(git symbolic-ref HEAD)" && + test_must_fail git rev-parse --verify HEAD^ +' + +test_expect_success '--orphan makes reflog by default' ' + git checkout master && + git config --unset core.logAllRefUpdates && + git checkout --orphan delta && + ! test -f .git/logs/refs/heads/delta && + test_must_fail PAGER= git reflog show delta && + git commit -m Delta && + test -f .git/logs/refs/heads/delta && + PAGER= git reflog show delta +' + +test_expect_success '--orphan does not make reflog when core.logAllRefUpdates = false' ' + git checkout master && + git config core.logAllRefUpdates false && + git checkout --orphan epsilon && + ! test -f .git/logs/refs/heads/epsilon && + test_must_fail PAGER= git reflog show epsilon && + git commit -m Epsilon && + ! test -f .git/logs/refs/heads/epsilon && + test_must_fail PAGER= git reflog show epsilon +' + +test_expect_success '--orphan with -l makes reflog when core.logAllRefUpdates = false' ' + git checkout master && + git checkout -l --orphan zeta && + test -f .git/logs/refs/heads/zeta && + test_must_fail PAGER= git reflog show zeta && + git commit -m Zeta && + PAGER= git reflog show zeta +' + +test_expect_success 'giving up --orphan not committed when -l and core.logAllRefUpdates = false deletes reflog' ' + git checkout master && + git checkout -l --orphan eta && + test -f .git/logs/refs/heads/eta && + test_must_fail PAGER= git reflog show eta && + git checkout master && + ! test -f .git/logs/refs/heads/eta && + test_must_fail PAGER= git reflog show eta +' + test_expect_success '--orphan is rejected with an existing name' ' git checkout master && test_must_fail git checkout --orphan master && @@ -60,31 +116,11 @@ test_expect_success '--orphan refuses to switch if a merge is needed' ' git reset --hard && echo local >>"$TEST_FILE" && cat "$TEST_FILE" >"$TEST_FILE.saved" && - test_must_fail git checkout --orphan gamma master^ && + test_must_fail git checkout --orphan new master^ && test refs/heads/master = "$(git symbolic-ref HEAD)" && test_cmp "$TEST_FILE" "$TEST_FILE.saved" && git diff-index --quiet --cached HEAD && git reset --hard ' -test_expect_success '--orphan does not mix well with -t' ' - git checkout master && - test_must_fail git checkout -t master --orphan gamma && - test refs/heads/master = "$(git symbolic-ref HEAD)" -' - -test_expect_success '--orphan ignores branch.autosetupmerge' ' - git checkout -f master && - git config branch.autosetupmerge always && - git checkout --orphan delta && - test -z "$(git config branch.delta.merge)" && - test refs/heads/delta = "$(git symbolic-ref HEAD)" && - test_must_fail git rev-parse --verify HEAD^ -' - -test_expect_success '--orphan does not mix well with -l' ' - git checkout -f master && - test_must_fail git checkout -l --orphan gamma -' - test_done diff --git a/t/t2106-update-index-assume-unchanged.sh b/t/t2106-update-index-assume-unchanged.sh new file mode 100755 index 0000000000..99d858c6b7 --- /dev/null +++ b/t/t2106-update-index-assume-unchanged.sh @@ -0,0 +1,24 @@ +#!/bin/sh + +test_description='git update-index --assume-unchanged test. +' + +. ./test-lib.sh + +test_expect_success 'setup' \ + ': >file && + git add file && + git commit -m initial && + git branch other && + echo upstream >file && + git add file && + git commit -m upstream' + +test_expect_success 'do not switch branches with dirty file' \ + 'git reset --hard && + git checkout other && + echo dirt >file && + git update-index --assume-unchanged file && + test_must_fail git checkout master' + +test_done diff --git a/t/t3030-merge-recursive.sh b/t/t3030-merge-recursive.sh index 9929f82021..d541544537 100755 --- a/t/t3030-merge-recursive.sh +++ b/t/t3030-merge-recursive.sh @@ -22,6 +22,7 @@ test_expect_success 'setup 1' ' git branch df-2 && git branch df-3 && git branch remove && + git branch submod && echo hello >>a && cp a d/e && @@ -236,6 +237,17 @@ test_expect_success 'setup 6' ' test_cmp expected actual ' +test_expect_success 'setup 7' ' + + git checkout submod && + git rm d/e && + test_tick && + git commit -m "remove d/e" && + git update-index --add --cacheinfo 160000 $c1 d && + test_tick && + git commit -m "make d/ a submodule" +' + test_expect_success 'merge-recursive simple' ' rm -fr [abcd] && @@ -551,4 +563,21 @@ test_expect_success 'merge removes empty directories' ' test_must_fail test -d d ' +test_expect_failure 'merge-recursive simple w/submodule' ' + + git checkout submod && + git merge remove +' + +test_expect_failure 'merge-recursive simple w/submodule result' ' + + git ls-files -s >actual && + ( + echo "100644 $o5 0 a" + echo "100644 $o0 0 c" + echo "160000 $c1 0 d" + ) >expected && + test_cmp expected actual +' + test_done diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index e0b760513c..859b99abf1 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -43,7 +43,7 @@ test_expect_success \ git branch -l d/e/f && test -f .git/refs/heads/d/e/f && test -f .git/logs/refs/heads/d/e/f && - diff expect .git/logs/refs/heads/d/e/f' + test_cmp expect .git/logs/refs/heads/d/e/f' test_expect_success \ 'git branch -d d/e/f should delete a branch and a log' \ @@ -222,7 +222,31 @@ test_expect_success \ git checkout -b g/h/i -l master && test -f .git/refs/heads/g/h/i && test -f .git/logs/refs/heads/g/h/i && - diff expect .git/logs/refs/heads/g/h/i' + test_cmp expect .git/logs/refs/heads/g/h/i' + +test_expect_success 'checkout -b makes reflog by default' ' + git checkout master && + git config --unset core.logAllRefUpdates && + git checkout -b alpha && + test -f .git/logs/refs/heads/alpha && + PAGER= git reflog show alpha +' + +test_expect_success 'checkout -b does not make reflog when core.logAllRefUpdates = false' ' + git checkout master && + git config core.logAllRefUpdates false && + git checkout -b beta && + ! test -f .git/logs/refs/heads/beta && + test_must_fail PAGER= git reflog show beta +' + +test_expect_success 'checkout -b with -l makes reflog when core.logAllRefUpdates = false' ' + git checkout master && + git checkout -lb gamma && + git config --unset core.logAllRefUpdates && + test -f .git/logs/refs/heads/gamma && + PAGER= git reflog show gamma +' test_expect_success 'avoid ambiguous track' ' git config branch.autosetupmerge true && diff --git a/t/t3210-pack-refs.sh b/t/t3210-pack-refs.sh index 413019acaf..525174013c 100755 --- a/t/t3210-pack-refs.sh +++ b/t/t3210-pack-refs.sh @@ -28,7 +28,7 @@ test_expect_success \ SHA1=`cat .git/refs/heads/a` && echo "$SHA1 refs/heads/a" >expect && git show-ref a >result && - diff expect result' + test_cmp expect result' test_expect_success \ 'see if a branch still exists when packed' \ @@ -37,7 +37,7 @@ test_expect_success \ rm -f .git/refs/heads/b && echo "$SHA1 refs/heads/b" >expect && git show-ref b >result && - diff expect result' + test_cmp expect result' test_expect_success 'git branch c/d should barf if branch c exists' ' git branch c && @@ -52,7 +52,7 @@ test_expect_success \ git pack-refs --all --prune && echo "$SHA1 refs/heads/e" >expect && git show-ref e >result && - diff expect result' + test_cmp expect result' test_expect_success 'see if git pack-refs --prune remove ref files' ' git branch f && @@ -109,7 +109,7 @@ test_expect_success 'pack, prune and repack' ' git show-ref >all-of-them && git pack-refs && git show-ref >again && - diff all-of-them again + test_cmp all-of-them again ' test_done diff --git a/t/t3301-notes.sh b/t/t3301-notes.sh index 64f32ad94d..2d67a40fc1 100755 --- a/t/t3301-notes.sh +++ b/t/t3301-notes.sh @@ -1044,4 +1044,10 @@ test_expect_success 'GIT_NOTES_REWRITE_REF overrides config' ' git log -1 > output && test_cmp expect output ' + +test_expect_success 'git notes copy diagnoses too many or too few parameters' ' + test_must_fail git notes copy && + test_must_fail git notes copy one two three +' + test_done diff --git a/t/t3306-notes-prune.sh b/t/t3306-notes-prune.sh index a0ed0353e6..b4554041b4 100755 --- a/t/t3306-notes-prune.sh +++ b/t/t3306-notes-prune.sh @@ -60,7 +60,7 @@ test_expect_success 'verify commits and notes' ' test_expect_success 'remove some commits' ' - git reset --hard HEAD~2 && + git reset --hard HEAD~1 && git reflog expire --expire=now HEAD && git gc --prune=now ' @@ -68,7 +68,7 @@ test_expect_success 'remove some commits' ' test_expect_success 'verify that commits are gone' ' ! git cat-file -p 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && - ! git cat-file -p 08341ad9e94faa089d60fd3f523affb25c6da189 && + git cat-file -p 08341ad9e94faa089d60fd3f523affb25c6da189 && git cat-file -p ab5f302035f2e7aaf04265f08b42034c23256e1f ' @@ -79,6 +79,26 @@ test_expect_success 'verify that notes are still present' ' git notes show ab5f302035f2e7aaf04265f08b42034c23256e1f ' +test_expect_success 'prune -n does not remove notes' ' + + git notes list > expect && + git notes prune -n && + git notes list > actual && + test_cmp expect actual +' + +cat > expect <<EOF +5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 +EOF + +test_expect_success 'prune -n lists prunable notes' ' + + + git notes prune -n > actual && + test_cmp expect actual +' + + test_expect_success 'prune notes' ' git notes prune @@ -87,6 +107,30 @@ test_expect_success 'prune notes' ' test_expect_success 'verify that notes are gone' ' ! git notes show 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && + git notes show 08341ad9e94faa089d60fd3f523affb25c6da189 && + git notes show ab5f302035f2e7aaf04265f08b42034c23256e1f +' + +test_expect_success 'remove some commits' ' + + git reset --hard HEAD~1 && + git reflog expire --expire=now HEAD && + git gc --prune=now +' + +cat > expect <<EOF +08341ad9e94faa089d60fd3f523affb25c6da189 +EOF + +test_expect_success 'prune -v notes' ' + + git notes prune -v > actual && + test_cmp expect actual +' + +test_expect_success 'verify that notes are gone' ' + + ! git notes show 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && ! git notes show 08341ad9e94faa089d60fd3f523affb25c6da189 && git notes show ab5f302035f2e7aaf04265f08b42034c23256e1f ' diff --git a/t/t3307-notes-man.sh b/t/t3307-notes-man.sh new file mode 100755 index 0000000000..3269f2eebd --- /dev/null +++ b/t/t3307-notes-man.sh @@ -0,0 +1,38 @@ +#!/bin/sh + +test_description='Examples from the git-notes man page + +Make sure the manual is not full of lies.' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit A && + test_commit B && + test_commit C +' + +test_expect_success 'example 1: notes to add an Acked-by line' ' + cat <<-\EOF >expect && + B + + Notes: + Acked-by: A C Ker <acker@example.com> + EOF + git notes add -m "Acked-by: A C Ker <acker@example.com>" B && + git show -s B^{commit} >log && + tail -n 4 log >actual && + test_cmp expect actual +' + +test_expect_success 'example 2: binary notes' ' + cp "$TEST_DIRECTORY"/test4012.png . + git checkout B && + blob=$(git hash-object -w test4012.png) && + git notes --ref=logo add -C "$blob" && + git notes --ref=logo copy B C && + git notes --ref=logo show C >actual && + test_cmp test4012.png actual +' + +test_done diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index dbf7dfba9b..d98c7b5571 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -10,8 +10,9 @@ among other things. ' . ./test-lib.sh -GIT_AUTHOR_EMAIL=bogus_email_address -export GIT_AUTHOR_EMAIL +GIT_AUTHOR_NAME=author@name +GIT_AUTHOR_EMAIL=bogus@email@address +export GIT_AUTHOR_NAME GIT_AUTHOR_EMAIL test_expect_success \ 'prepare repository with topic branches' \ @@ -80,6 +81,10 @@ test_expect_success \ 'the rebase operation should not have destroyed author information' \ '! (git log | grep "Author:" | grep "<>")' +test_expect_success \ + 'the rebase operation should not have destroyed author information (2)' \ + "git log -1 | grep 'Author: $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL>'" + test_expect_success 'HEAD was detached during rebase' ' test $(git rev-parse HEAD@{1}) != $(git rev-parse my-topic-branch@{1}) ' @@ -126,9 +131,20 @@ test_expect_success 'Show verbose error when HEAD could not be detached' ' test_must_fail git rebase topic 2> output.err > output.out && grep "Untracked working tree file .B. would be overwritten" output.err ' +rm -f B + +test_expect_success 'dump usage when upstream arg is missing' ' + git checkout -b usage topic && + test_must_fail git rebase 2>error1 && + grep "[Uu]sage" error1 && + test_must_fail git rebase --abort 2>error2 && + grep "No rebase in progress" error2 && + test_must_fail git rebase --onto master 2>error3 && + grep "[Uu]sage" error3 && + ! grep "can.t shift" error3 +' test_expect_success 'rebase -q is quiet' ' - rm B && git checkout -b quiet topic && git rebase -q master > output.out 2>&1 && test ! -s output.out diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index f20ea38411..ee9a1b25e6 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -146,6 +146,16 @@ test_expect_success 'abort' ' ! test -d .git/rebase-merge ' +test_expect_success 'abort with error when new base cannot be checked out' ' + git rm --cached file1 && + git commit -m "remove file in base" && + test_must_fail git rebase -i master > output 2>&1 && + grep "Untracked working tree file .file1. would be overwritten" \ + output && + ! test -d .git/rebase-merge && + git reset --hard HEAD^ +' + test_expect_success 'retain authorship' ' echo A > file7 && git add file7 && @@ -181,6 +191,12 @@ test_expect_success '-p handles "no changes" gracefully' ' test $HEAD = $(git rev-parse HEAD) ' +test_expect_failure 'exchange two commits with -p' ' + FAKE_LINES="2 1" git rebase -i -p HEAD~2 && + test H = $(git cat-file commit HEAD^ | sed -ne \$p) && + test G = $(git cat-file commit HEAD | sed -ne \$p) +' + test_expect_success 'preserve merges with -p' ' git checkout -b to-be-preserved master^ && : > unrelated-file && diff --git a/t/t3501-revert-cherry-pick.sh b/t/t3501-revert-cherry-pick.sh index f61c54dfe2..bc7aedd048 100755 --- a/t/t3501-revert-cherry-pick.sh +++ b/t/t3501-revert-cherry-pick.sh @@ -65,7 +65,8 @@ test_expect_success 'cherry-pick after renaming branch' ' git cherry-pick added && test $(git rev-parse HEAD^) = $(git rev-parse rename2) && test -f opos && - grep "Add extra line at the end" opos + grep "Add extra line at the end" opos && + git reflog -1 | grep cherry-pick ' @@ -75,7 +76,8 @@ test_expect_success 'revert after renaming branch' ' git revert added && test $(git rev-parse HEAD^) = $(git rev-parse rename1) && test -f spoo && - ! grep "Add extra line at the end" spoo + ! grep "Add extra line at the end" spoo && + git reflog -1 | grep revert ' diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index 8fe14ccc54..62e208aadd 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -81,7 +81,7 @@ test_expect_success 'drop top stash' ' git stash && git stash drop && git stash list > stashlist2 && - diff stashlist1 stashlist2 && + test_cmp stashlist1 stashlist2 && git stash apply && test 3 = $(cat file) && test 1 = $(git show :file) && diff --git a/t/t4002-diff-basic.sh b/t/t4002-diff-basic.sh index 18695ce821..73441a5165 100755 --- a/t/t4002-diff-basic.sh +++ b/t/t4002-diff-basic.sh @@ -135,7 +135,7 @@ cmp_diff_files_output () { # filesystem. sed <"$2" >.test-tmp \ -e '/^:000000 /d;s/'$x40'\( [MCRNDU][0-9]*\) /'$z40'\1 /' && - diff "$1" .test-tmp + test_cmp "$1" .test-tmp } test_expect_success \ diff --git a/t/t4013/diff.format-patch_--stdout_--cover-letter_-n_initial..master^ b/t/t4013/diff.format-patch_--stdout_--cover-letter_-n_initial..master^ index 8dab4bf93e..1f0f9ad44b 100644 --- a/t/t4013/diff.format-patch_--stdout_--cover-letter_-n_initial..master^ +++ b/t/t4013/diff.format-patch_--stdout_--cover-letter_-n_initial..master^ @@ -18,6 +18,9 @@ A U Thor (2): create mode 100644 file1 delete mode 100644 file2 +-- +g-i-t--v-e-r-s-i-o-n + From 1bde4ae5f36c8d9abe3a0fce0c6aab3c4a12fe44 Mon Sep 17 00:00:00 2001 From: A U Thor <author@example.com> Date: Mon, 26 Jun 2006 00:01:00 +0000 diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index d21c37f3a2..f87434b9f8 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -613,4 +613,56 @@ test_expect_success 'format-patch --ignore-if-in-upstream HEAD' ' git format-patch --ignore-if-in-upstream HEAD ' +test_expect_success 'format-patch --signature' ' + git format-patch --stdout --signature="my sig" -1 >output && + grep "my sig" output +' + +test_expect_success 'format-patch with format.signature config' ' + git config format.signature "config sig" && + git format-patch --stdout -1 >output && + grep "config sig" output +' + +test_expect_success 'format-patch --signature overrides format.signature' ' + git config format.signature "config sig" && + git format-patch --stdout --signature="overrides" -1 >output && + ! grep "config sig" output && + grep "overrides" output +' + +test_expect_success 'format-patch --no-signature ignores format.signature' ' + git config format.signature "config sig" && + git format-patch --stdout --signature="my sig" --no-signature \ + -1 >output && + ! grep "config sig" output && + ! grep "my sig" output && + ! grep "^-- \$" output +' + +test_expect_success 'format-patch --signature --cover-letter' ' + git config --unset-all format.signature && + git format-patch --stdout --signature="my sig" --cover-letter \ + -1 >output && + grep "my sig" output && + test 2 = $(grep "my sig" output | wc -l) +' + +test_expect_success 'format.signature="" supresses signatures' ' + git config format.signature "" && + git format-patch --stdout -1 >output && + ! grep "^-- \$" output +' + +test_expect_success 'format-patch --no-signature supresses signatures' ' + git config --unset-all format.signature && + git format-patch --stdout --no-signature -1 >output && + ! grep "^-- \$" output +' + +test_expect_success 'format-patch --signature="" supresses signatures' ' + git format-patch --signature="" -1 >output && + ! grep "^-- \$" output +' + test_done diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh index e92eab09cb..935d101fe8 100755 --- a/t/t4015-diff-whitespace.sh +++ b/t/t4015-diff-whitespace.sh @@ -438,6 +438,43 @@ test_expect_success 'whitespace-only changes not reported' ' test_cmp expect actual ' +cat <<EOF >expect +diff --git a/x b/z +similarity index NUM% +rename from x +rename to z +index 380c32a..a97b785 100644 +EOF +test_expect_success 'whitespace-only changes reported across renames' ' + git reset --hard && + for i in 1 2 3 4 5 6 7 8 9; do echo "$i$i$i$i$i$i"; done >x && + git add x && + git commit -m "base" && + sed -e "5s/^/ /" x >z && + git rm x && + git add z && + git diff -w -M --cached | + sed -e "/^similarity index /s/[0-9][0-9]*/NUM/" >actual && + test_cmp expect actual +' + +cat >expected <<\EOF +diff --git a/empty b/void +similarity index 100% +rename from empty +rename to void +EOF + +test_expect_success 'rename empty' ' + git reset --hard && + >empty && + git add empty && + git commit -m empty && + git mv empty void && + git diff -w --cached -M >current && + test_cmp expected current +' + test_expect_success 'combined diff with autocrlf conversion' ' git reset --hard && diff --git a/t/t4027-diff-submodule.sh b/t/t4027-diff-submodule.sh index 83c1914771..1bd8e5ee3a 100755 --- a/t/t4027-diff-submodule.sh +++ b/t/t4027-diff-submodule.sh @@ -103,7 +103,15 @@ test_expect_success 'git diff HEAD with dirty submodule (work tree, refs match)' git diff HEAD >actual && sed -e "1,/^@@/d" actual >actual.body && expect_from_to >expect.body $subprev $subprev-dirty && - test_cmp expect.body actual.body + test_cmp expect.body actual.body && + git diff --ignore-submodules HEAD >actual2 && + ! test -s actual2 && + git diff --ignore-submodules=untracked HEAD >actual3 && + sed -e "1,/^@@/d" actual3 >actual3.body && + expect_from_to >expect.body $subprev $subprev-dirty && + test_cmp expect.body actual3.body && + git diff --ignore-submodules=dirty HEAD >actual4 && + ! test -s actual4 ' test_expect_success 'git diff HEAD with dirty submodule (index, refs match)' ' @@ -129,7 +137,13 @@ test_expect_success 'git diff HEAD with dirty submodule (untracked, refs match)' git diff HEAD >actual && sed -e "1,/^@@/d" actual >actual.body && expect_from_to >expect.body $subprev $subprev-dirty && - test_cmp expect.body actual.body + test_cmp expect.body actual.body && + git diff --ignore-submodules=all HEAD >actual2 && + ! test -s actual2 && + git diff --ignore-submodules=untracked HEAD >actual3 && + ! test -s actual3 && + git diff --ignore-submodules=dirty HEAD >actual4 && + ! test -s actual4 ' test_expect_success 'git diff (empty submodule dir)' ' diff --git a/t/t4041-diff-submodule.sh b/t/t4041-diff-submodule-option.sh index 019acb926d..8e391cf9a7 100755 --- a/t/t4041-diff-submodule.sh +++ b/t/t4041-diff-submodule-option.sh @@ -205,6 +205,21 @@ Submodule sm1 contains untracked content EOF " +test_expect_success 'submodule contains untracked content (untracked ignored)' " + git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && + ! test -s actual +" + +test_expect_success 'submodule contains untracked content (dirty ignored)' " + git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual && + ! test -s actual +" + +test_expect_success 'submodule contains untracked content (all ignored)' " + git diff-index -p --ignore-submodules=all --submodule=log HEAD >actual && + ! test -s actual +" + test_expect_success 'submodule contains untracked and modifed content' " echo new > sm1/foo6 && git diff-index -p --submodule=log HEAD >actual && @@ -214,6 +229,26 @@ Submodule sm1 contains modified content EOF " +test_expect_success 'submodule contains untracked and modifed content (untracked ignored)' " + echo new > sm1/foo6 && + git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && + diff actual - <<-EOF +Submodule sm1 contains modified content +EOF +" + +test_expect_success 'submodule contains untracked and modifed content (dirty ignored)' " + echo new > sm1/foo6 && + git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual && + ! test -s actual +" + +test_expect_success 'submodule contains untracked and modifed content (all ignored)' " + echo new > sm1/foo6 && + git diff-index -p --ignore-submodules --submodule=log HEAD >actual && + ! test -s actual +" + test_expect_success 'submodule contains modifed content' " rm -f sm1/new-file && git diff-index -p --submodule=log HEAD >actual && @@ -242,6 +277,27 @@ Submodule sm1 $head6..$head8: EOF " +test_expect_success 'modified submodule contains untracked content (untracked ignored)' " + git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && + diff actual - <<-EOF +Submodule sm1 $head6..$head8: + > change +EOF +" + +test_expect_success 'modified submodule contains untracked content (dirty ignored)' " + git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual && + diff actual - <<-EOF +Submodule sm1 $head6..$head8: + > change +EOF +" + +test_expect_success 'modified submodule contains untracked content (all ignored)' " + git diff-index -p --ignore-submodules=all --submodule=log HEAD >actual && + ! test -s actual +" + test_expect_success 'modified submodule contains untracked and modifed content' " echo modification >> sm1/foo6 && git diff-index -p --submodule=log HEAD >actual && @@ -253,6 +309,31 @@ Submodule sm1 $head6..$head8: EOF " +test_expect_success 'modified submodule contains untracked and modifed content (untracked ignored)' " + echo modification >> sm1/foo6 && + git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && + diff actual - <<-EOF +Submodule sm1 contains modified content +Submodule sm1 $head6..$head8: + > change +EOF +" + +test_expect_success 'modified submodule contains untracked and modifed content (dirty ignored)' " + echo modification >> sm1/foo6 && + git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual && + diff actual - <<-EOF +Submodule sm1 $head6..$head8: + > change +EOF +" + +test_expect_success 'modified submodule contains untracked and modifed content (all ignored)' " + echo modification >> sm1/foo6 && + git diff-index -p --ignore-submodules --submodule=log HEAD >actual && + ! test -s actual +" + test_expect_success 'modified submodule contains modifed content' " rm -f sm1/new-file && git diff-index -p --submodule=log HEAD >actual && diff --git a/t/t4043-diff-rename-binary.sh b/t/t4043-diff-rename-binary.sh new file mode 100755 index 0000000000..06012811a1 --- /dev/null +++ b/t/t4043-diff-rename-binary.sh @@ -0,0 +1,45 @@ +#!/bin/sh +# +# Copyright (c) 2010 Jakub Narebski, Christian Couder +# + +test_description='Move a binary file' + +. ./test-lib.sh + + +test_expect_success 'prepare repository' ' + git init && + echo foo > foo && + echo "barQ" | q_to_nul > bar && + git add . && + git commit -m "Initial commit" +' + +test_expect_success 'move the files into a "sub" directory' ' + mkdir sub && + git mv bar foo sub/ && + git commit -m "Moved to sub/" +' + +cat > expected <<\EOF + bar => sub/bar | Bin 5 -> 5 bytes + foo => sub/foo | 0 + 2 files changed, 0 insertions(+), 0 deletions(-) + +diff --git a/bar b/sub/bar +similarity index 100% +rename from bar +rename to sub/bar +diff --git a/foo b/sub/foo +similarity index 100% +rename from foo +rename to sub/foo +EOF + +test_expect_success 'git show -C -C report renames' ' + git show -C -C --raw --binary --stat | tail -n 12 > current && + test_cmp expected current +' + +test_done diff --git a/t/t4044-diff-index-unique-abbrev.sh b/t/t4044-diff-index-unique-abbrev.sh new file mode 100755 index 0000000000..d5ce72be63 --- /dev/null +++ b/t/t4044-diff-index-unique-abbrev.sh @@ -0,0 +1,35 @@ +#!/bin/sh + +test_description='test unique sha1 abbreviation on "index from..to" line' +. ./test-lib.sh + +cat >expect_initial <<EOF +100644 blob 51d2738463ea4ca66f8691c91e33ce64b7d41bb1 foo +EOF + +cat >expect_update <<EOF +100644 blob 51d2738efb4ad8a1e40bed839ab8e116f0a15e47 foo +EOF + +test_expect_success 'setup' ' + echo 4827 > foo && + git add foo && + git commit -m "initial" && + git cat-file -p HEAD: > actual && + test_cmp expect_initial actual && + echo 11742 > foo && + git commit -a -m "update" && + git cat-file -p HEAD: > actual && + test_cmp expect_update actual +' + +cat >expect <<EOF +index 51d27384..51d2738e 100644 +EOF + +test_expect_success 'diff does not produce ambiguous index line' ' + git diff HEAD^..HEAD | grep index > actual && + test_cmp expect actual +' + +test_done diff --git a/t/t4124-apply-ws-rule.sh b/t/t4124-apply-ws-rule.sh index d0af697aa1..8a676a5dcd 100755 --- a/t/t4124-apply-ws-rule.sh +++ b/t/t4124-apply-ws-rule.sh @@ -44,7 +44,7 @@ test_fix () { apply_patch --whitespace=fix || return 1 # find touched lines - diff file target | sed -n -e "s/^> //p" >fixed + $DIFF file target | sed -n -e "s/^> //p" >fixed # the changed lines are all expeced to change fixed_cnt=$(wc -l <fixed) @@ -85,14 +85,14 @@ test_expect_success setup ' test_expect_success 'whitespace=nowarn, default rule' ' apply_patch --whitespace=nowarn && - diff file target + test_cmp file target ' test_expect_success 'whitespace=warn, default rule' ' apply_patch --whitespace=warn && - diff file target + test_cmp file target ' @@ -108,7 +108,7 @@ test_expect_success 'whitespace=error-all, no rule' ' git config core.whitespace -trailing,-space-before,-indent && apply_patch --whitespace=error-all && - diff file target + test_cmp file target ' @@ -117,7 +117,7 @@ test_expect_success 'whitespace=error-all, no rule (attribute)' ' git config --unset core.whitespace && echo "target -whitespace" >.gitattributes && apply_patch --whitespace=error-all && - diff file target + test_cmp file target ' diff --git a/t/t4127-apply-same-fn.sh b/t/t4127-apply-same-fn.sh index 3a8202ea93..77200c0b2d 100755 --- a/t/t4127-apply-same-fn.sh +++ b/t/t4127-apply-same-fn.sh @@ -27,7 +27,7 @@ test_expect_success 'apply same filename with independent changes' ' cp same_fn same_fn2 && git reset --hard && git apply patch0 && - diff same_fn same_fn2 + test_cmp same_fn same_fn2 ' test_expect_success 'apply same filename with overlapping changes' ' @@ -40,7 +40,7 @@ test_expect_success 'apply same filename with overlapping changes' ' cp same_fn same_fn2 && git reset --hard && git apply patch0 && - diff same_fn same_fn2 + test_cmp same_fn same_fn2 ' test_expect_success 'apply same new filename after rename' ' @@ -54,7 +54,7 @@ test_expect_success 'apply same new filename after rename' ' cp new_fn new_fn2 && git reset --hard && git apply --index patch1 && - diff new_fn new_fn2 + test_cmp new_fn new_fn2 ' test_expect_success 'apply same old filename after rename -- should fail.' ' diff --git a/t/t4205-log-pretty-formats.sh b/t/t4205-log-pretty-formats.sh new file mode 100755 index 0000000000..cb9f2bdd29 --- /dev/null +++ b/t/t4205-log-pretty-formats.sh @@ -0,0 +1,74 @@ +#!/bin/sh +# +# Copyright (c) 2010, Will Palmer +# + +test_description='Test pretty formats' +. ./test-lib.sh + +test_expect_success 'set up basic repos' ' + >foo && + >bar && + git add foo && + test_tick && + git commit -m initial && + git add bar && + test_tick && + git commit -m "add bar" +' + +test_expect_success 'alias builtin format' ' + git log --pretty=oneline >expected && + git config pretty.test-alias oneline && + git log --pretty=test-alias >actual && + test_cmp expected actual +' + +test_expect_success 'alias masking builtin format' ' + git log --pretty=oneline >expected && + git config pretty.oneline "%H" && + git log --pretty=oneline >actual && + test_cmp expected actual +' + +test_expect_success 'alias user-defined format' ' + git log --pretty="format:%h" >expected && + git config pretty.test-alias "format:%h" && + git log --pretty=test-alias >actual && + test_cmp expected actual +' + +test_expect_success 'alias user-defined tformat' ' + git log --pretty="tformat:%h" >expected && + git config pretty.test-alias "tformat:%h" && + git log --pretty=test-alias >actual && + test_cmp expected actual +' + +test_expect_success 'alias non-existant format' ' + git config pretty.test-alias format-that-will-never-exist && + test_must_fail git log --pretty=test-alias +' + +test_expect_success 'alias of an alias' ' + git log --pretty="tformat:%h" >expected && + git config pretty.test-foo "tformat:%h" && + git config pretty.test-bar test-foo && + git log --pretty=test-bar >actual && test_cmp expected actual +' + +test_expect_success 'alias masking an alias' ' + git log --pretty=format:"Two %H" >expected && + git config pretty.duplicate "format:One %H" && + git config --add pretty.duplicate "format:Two %H" && + git log --pretty=duplicate >actual && + test_cmp expected actual +' + +test_expect_success 'alias loop' ' + git config pretty.test-foo test-bar && + git config pretty.test-bar test-foo && + test_must_fail git log --pretty=test-foo +' + +test_done diff --git a/t/t5150-request-pull.sh b/t/t5150-request-pull.sh index 169d3ea376..9cc0a42ea9 100755 --- a/t/t5150-request-pull.sh +++ b/t/t5150-request-pull.sh @@ -67,7 +67,7 @@ test_expect_success 'setup: two scripts for reading pull requests' ' cat <<-\EOT >read-request.sed && #!/bin/sed -nf - / in the git repository at:$/! d + / in the git repository at:$/!d n /^$/ n s/^[ ]*\(.*\) \([^ ]*\)/please pull\ @@ -102,7 +102,7 @@ test_expect_success 'setup: two scripts for reading pull requests' ' /^ [a-zA-Z]/ n /^[a-zA-Z]* ([0-9]*):\$/ n /^\$/ N - /^\n[a-zA-Z]* ([0-9]*):\$/! { + /^\n[a-zA-Z]* ([0-9]*):\$/!{ a\\ SHORTLOG D diff --git a/t/t5300-pack-object.sh b/t/t5300-pack-object.sh index 7649b810b1..bbb9c1251d 100755 --- a/t/t5300-pack-object.sh +++ b/t/t5300-pack-object.sh @@ -147,7 +147,7 @@ test_expect_success \ git cat-file $t $object || return 1 done <obj-list } >current && - diff expect current' + test_cmp expect current' test_expect_success \ 'use packed deltified (REF_DELTA) objects' \ @@ -162,7 +162,7 @@ test_expect_success \ git cat-file $t $object || return 1 done <obj-list } >current && - diff expect current' + test_cmp expect current' test_expect_success \ 'use packed deltified (OFS_DELTA) objects' \ @@ -177,7 +177,7 @@ test_expect_success \ git cat-file $t $object || return 1 done <obj-list } >current && - diff expect current' + test_cmp expect current' unset GIT_OBJECT_DIRECTORY diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh index 41f17e7693..4c498b1902 100755 --- a/t/t5505-remote.sh +++ b/t/t5505-remote.sh @@ -597,6 +597,94 @@ test_expect_success 'show empty remote' ' ) ' +test_expect_success 'remote set-branches requires a remote' ' + test_must_fail git remote set-branches && + test_must_fail git remote set-branches --add +' + +test_expect_success 'remote set-branches' ' + echo "+refs/heads/*:refs/remotes/scratch/*" >expect.initial && + sort <<-\EOF >expect.add && + +refs/heads/*:refs/remotes/scratch/* + +refs/heads/other:refs/remotes/scratch/other + EOF + sort <<-\EOF >expect.replace && + +refs/heads/maint:refs/remotes/scratch/maint + +refs/heads/master:refs/remotes/scratch/master + +refs/heads/next:refs/remotes/scratch/next + EOF + sort <<-\EOF >expect.add-two && + +refs/heads/maint:refs/remotes/scratch/maint + +refs/heads/master:refs/remotes/scratch/master + +refs/heads/next:refs/remotes/scratch/next + +refs/heads/pu:refs/remotes/scratch/pu + +refs/heads/t/topic:refs/remotes/scratch/t/topic + EOF + sort <<-\EOF >expect.setup-ffonly && + refs/heads/master:refs/remotes/scratch/master + +refs/heads/next:refs/remotes/scratch/next + EOF + sort <<-\EOF >expect.respect-ffonly && + refs/heads/master:refs/remotes/scratch/master + +refs/heads/next:refs/remotes/scratch/next + +refs/heads/pu:refs/remotes/scratch/pu + EOF + + git clone .git/ setbranches && + ( + cd setbranches && + git remote rename origin scratch && + git config --get-all remote.scratch.fetch >config-result && + sort <config-result >../actual.initial && + + git remote set-branches scratch --add other && + git config --get-all remote.scratch.fetch >config-result && + sort <config-result >../actual.add && + + git remote set-branches scratch maint master next && + git config --get-all remote.scratch.fetch >config-result && + sort <config-result >../actual.replace && + + git remote set-branches --add scratch pu t/topic && + git config --get-all remote.scratch.fetch >config-result && + sort <config-result >../actual.add-two && + + git config --unset-all remote.scratch.fetch && + git config remote.scratch.fetch \ + refs/heads/master:refs/remotes/scratch/master && + git config --add remote.scratch.fetch \ + +refs/heads/next:refs/remotes/scratch/next && + git config --get-all remote.scratch.fetch >config-result && + sort <config-result >../actual.setup-ffonly && + + git remote set-branches --add scratch pu && + git config --get-all remote.scratch.fetch >config-result && + sort <config-result >../actual.respect-ffonly + ) && + test_cmp expect.initial actual.initial && + test_cmp expect.add actual.add && + test_cmp expect.replace actual.replace && + test_cmp expect.add-two actual.add-two && + test_cmp expect.setup-ffonly actual.setup-ffonly && + test_cmp expect.respect-ffonly actual.respect-ffonly +' + +test_expect_success 'remote set-branches with --mirror' ' + echo "+refs/*:refs/*" >expect.initial && + echo "+refs/heads/master:refs/heads/master" >expect.replace && + git clone --mirror .git/ setbranches-mirror && + ( + cd setbranches-mirror && + git remote rename origin scratch && + git config --get-all remote.scratch.fetch >../actual.initial && + + git remote set-branches scratch heads/master && + git config --get-all remote.scratch.fetch >../actual.replace + ) && + test_cmp expect.initial actual.initial && + test_cmp expect.replace actual.replace +' + test_expect_success 'new remote' ' git remote add someremote foo && echo foo >expect && diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index 721821ec92..4eb10f602f 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -71,7 +71,7 @@ test_expect_success "fetch test for-merge" ' echo "$one_in_two " } >expected && cut -f -2 .git/FETCH_HEAD >actual && - diff expected actual' + test_cmp expected actual' test_expect_success 'fetch tags when there is no tags' ' diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index 3cf1b3da40..d1912351db 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -57,12 +57,24 @@ test_expect_success 'dies when no remote specified and no default remotes found' test_expect_success 'use "origin" when no remote specified' ' - git remote add origin "$(pwd)/.git" && - git ls-remote >actual && + URL="$(pwd)/.git" && + echo "From $URL" >exp_err && + + git remote add origin "$URL" && + git ls-remote 2>actual_err >actual && + + test_cmp exp_err actual_err && test_cmp expected.all actual ' +test_expect_success 'suppress "From <url>" with -q' ' + + git ls-remote -q 2>actual_err && + test_must_fail test_cmp exp_err actual_err + +' + test_expect_success 'use branch.<name>.remote if possible' ' # @@ -78,10 +90,14 @@ test_expect_success 'use branch.<name>.remote if possible' ' git show-ref | sed -e "s/ / /" ) >exp && - git remote add other other.git && + URL="other.git" && + echo "From $URL" >exp_err && + + git remote add other $URL && git config branch.master.remote other && - git ls-remote >actual && + git ls-remote 2>actual_err >actual && + test_cmp exp_err actual_err && test_cmp exp actual ' diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh index dd2ee842e0..319e389ed0 100755 --- a/t/t5520-pull.sh +++ b/t/t5520-pull.sh @@ -26,7 +26,7 @@ cd "$D" test_expect_success 'checking the results' ' test -f file && test -f cloned/file && - diff file cloned/file + test_cmp file cloned/file ' test_expect_success 'pulling into void using master:master' ' diff --git a/t/t5530-upload-pack-error.sh b/t/t5530-upload-pack-error.sh index a696b8791b..044603c26e 100755 --- a/t/t5530-upload-pack-error.sh +++ b/t/t5530-upload-pack-error.sh @@ -32,9 +32,9 @@ test_expect_success 'fsck fails' ' test_expect_success 'upload-pack fails due to error in pack-objects packing' ' - ! echo "0032want $(git rev-parse HEAD) -00000009done -0000" | git upload-pack . > /dev/null 2> output.err && + printf "0032want %s\n00000009done\n0000" \ + $(git rev-parse HEAD) >input && + test_must_fail git upload-pack . <input >/dev/null 2>output.err && grep "unable to read" output.err && grep "pack-objects died" output.err ' @@ -51,9 +51,9 @@ test_expect_success 'fsck fails' ' ' test_expect_success 'upload-pack fails due to error in rev-list' ' - ! echo "0032want $(git rev-parse HEAD) -0034shallow $(git rev-parse HEAD^)00000009done -0000" | git upload-pack . > /dev/null 2> output.err && + printf "0032want %s\n0034shallow %s00000009done\n0000" \ + $(git rev-parse HEAD) $(git rev-parse HEAD^) >input && + test_must_fail git upload-pack . <input >/dev/null 2>output.err && # pack-objects survived grep "Total.*, reused" output.err && # but there was an error, which must have been in rev-list @@ -62,9 +62,9 @@ test_expect_success 'upload-pack fails due to error in rev-list' ' test_expect_success 'upload-pack fails due to error in pack-objects enumeration' ' - ! echo "0032want $(git rev-parse HEAD) -00000009done -0000" | git upload-pack . > /dev/null 2> output.err && + printf "0032want %s\n00000009done\n0000" \ + $(git rev-parse HEAD) >input && + test_must_fail git upload-pack . <input >/dev/null 2>output.err && grep "bad tree object" output.err && grep "pack-objects died" output.err ' diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 678cee502d..8abb71afcd 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -176,4 +176,16 @@ test_expect_success 'clone respects global branch.autosetuprebase' ' ) ' +test_expect_success 'respect url-encoding of file://' ' + git init x+y && + test_must_fail git clone "file://$PWD/x+y" xy-url && + git clone "file://$PWD/x%2By" xy-url +' + +test_expect_success 'do not respect url-encoding of non-url path' ' + git init x+y && + test_must_fail git clone x%2By xy-regular && + git clone x+y xy-regular +' + test_done diff --git a/t/t5700-clone-reference.sh b/t/t5700-clone-reference.sh index 1c10916069..895f5595ae 100755 --- a/t/t5700-clone-reference.sh +++ b/t/t5700-clone-reference.sh @@ -48,7 +48,7 @@ test_expect_success 'that reference gets used' \ 'cd C && echo "0 objects, 0 kilobytes" > expected && git count-objects > current && -diff expected current' +test_cmp expected current' cd "$base_dir" @@ -75,7 +75,7 @@ cd "$base_dir" test_expect_success 'that reference gets used' \ 'cd D && echo "0 objects, 0 kilobytes" > expected && git count-objects > current && -diff expected current' +test_cmp expected current' cd "$base_dir" @@ -100,7 +100,7 @@ test_expect_success 'that alternate to origin gets used' \ 'cd C && echo "2 objects" > expected && git count-objects | cut -d, -f1 > current && -diff expected current' +test_cmp expected current' cd "$base_dir" @@ -116,7 +116,7 @@ test_expect_success 'check objects expected to exist locally' \ 'cd D && echo "5 objects" > expected && git count-objects | cut -d, -f1 > current && -diff expected current' +test_cmp expected current' cd "$base_dir" diff --git a/t/t5800-remote-helpers.sh b/t/t5800-remote-helpers.sh index 75a0163c07..4ee7b65ce6 100755 --- a/t/t5800-remote-helpers.sh +++ b/t/t5800-remote-helpers.sh @@ -7,9 +7,15 @@ test_description='Test remote-helper import and export commands' . ./test-lib.sh -if ! test_have_prereq PYTHON +if test_have_prereq PYTHON && "$PYTHON_PATH" -c ' +import sys +if sys.hexversion < 0x02040000: + sys.exit(1) +' then - say 'skipping git remote-testgit tests: requires Python support' + : +else + say 'skipping git remote-testgit tests: requires Python 2.4 or newer' test_done fi diff --git a/t/t6001-rev-list-graft.sh b/t/t6001-rev-list-graft.sh index b2131cdacd..fc57e7d3fd 100755 --- a/t/t6001-rev-list-graft.sh +++ b/t/t6001-rev-list-graft.sh @@ -84,7 +84,7 @@ check () { git rev-list --parents --pretty=raw $arg | sed -n -e 's/^commit //p' >test.actual fi - diff test.expect test.actual + test_cmp test.expect test.actual } for type in basic parents parents-raw diff --git a/t/t6002-rev-list-bisect.sh b/t/t6002-rev-list-bisect.sh index b4e8fbaa5e..fb07536a0f 100755 --- a/t/t6002-rev-list-bisect.sh +++ b/t/t6002-rev-list-bisect.sh @@ -5,7 +5,7 @@ test_description='Tests git rev-list --bisect functionality' . ./test-lib.sh -. "$TEST_DIRECTORY"/t6000lib.sh # t6xxx specific functions +. "$TEST_DIRECTORY"/lib-t6000.sh # t6xxx specific functions # usage: test_bisection max-diff bisect-option head ^prune... # diff --git a/t/t6003-rev-list-topo-order.sh b/t/t6003-rev-list-topo-order.sh index 2c73f2da7b..e4c52b0214 100755 --- a/t/t6003-rev-list-topo-order.sh +++ b/t/t6003-rev-list-topo-order.sh @@ -6,7 +6,7 @@ test_description='Tests git rev-list --topo-order functionality' . ./test-lib.sh -. "$TEST_DIRECTORY"/t6000lib.sh # t6xxx specific functions +. "$TEST_DIRECTORY"/lib-t6000.sh # t6xxx specific functions list_duplicates() { diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index 9b77073df8..cccacd4add 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -200,6 +200,16 @@ test_expect_success 'add LF before non-empty (2)' ' grep "^$" actual ' +test_expect_success 'add SP before non-empty (1)' ' + git show -s --pretty=format:"%s% bThanks" HEAD^^ >actual && + test $(wc -w <actual) = 2 +' + +test_expect_success 'add SP before non-empty (2)' ' + git show -s --pretty=format:"%s% sThanks" HEAD^^ >actual && + test $(wc -w <actual) = 4 +' + test_expect_success '--abbrev' ' echo SHORT SHORT SHORT >expect2 && echo LONG LONG LONG >expect3 && diff --git a/t/t6007-rev-list-cherry-pick-file.sh b/t/t6007-rev-list-cherry-pick-file.sh index 4b8611ce20..b565638e92 100755 --- a/t/t6007-rev-list-cherry-pick-file.sh +++ b/t/t6007-rev-list-cherry-pick-file.sh @@ -32,6 +32,23 @@ test_expect_success setup ' git tag B ' +cat >expect <<EOF +<tags/B +>tags/C +EOF + +test_expect_success '--left-right' ' + git rev-list --left-right B...C > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect +' + +test_expect_success '--count' ' + git rev-list --count B...C > actual && + test "$(cat actual)" = 2 +' + test_expect_success '--cherry-pick foo comes up empty' ' test -z "$(git rev-list --left-right --cherry-pick B...C -- foo)" ' @@ -54,4 +71,16 @@ test_expect_success '--cherry-pick with independent, but identical branches' ' HEAD...master -- foo)" ' +cat >expect <<EOF +1 2 +EOF + +# Insert an extra commit to break the symmetry +test_expect_success '--count --left-right' ' + git checkout branch && + test_commit D && + git rev-list --count --left-right B...D > actual && + test_cmp expect actual +' + test_done diff --git a/t/t6018-rev-list-glob.sh b/t/t6018-rev-list-glob.sh index 8d3fa7d014..58428d9f5c 100755 --- a/t/t6018-rev-list-glob.sh +++ b/t/t6018-rev-list-glob.sh @@ -34,7 +34,9 @@ test_expect_success 'setup' ' git checkout master && commit master2 && git tag foo/bar master && - git update-ref refs/remotes/foo/baz master + commit master3 && + git update-ref refs/remotes/foo/baz master && + commit master4 ' test_expect_success 'rev-parse --glob=refs/heads/subspace/*' ' @@ -162,6 +164,13 @@ test_expect_success 'rev-list --branches=subspace' ' compare rev-list "subspace/one subspace/two" "--branches=subspace" ' + +test_expect_success 'rev-list --branches' ' + + compare rev-list "master subspace-x someref other/three subspace/one subspace/two" "--branches" + +' + test_expect_success 'rev-list --glob=heads/someref/* master' ' compare rev-list "master" "--glob=heads/someref/* master" @@ -186,6 +195,12 @@ test_expect_success 'rev-list --tags=foo' ' ' +test_expect_success 'rev-list --tags' ' + + compare rev-list "foo/bar" "--tags" + +' + test_expect_success 'rev-list --remotes=foo' ' compare rev-list "foo/baz" "--remotes=foo" diff --git a/t/t6019-rev-list-ancestry-path.sh b/t/t6019-rev-list-ancestry-path.sh new file mode 100755 index 0000000000..76410293b3 --- /dev/null +++ b/t/t6019-rev-list-ancestry-path.sh @@ -0,0 +1,73 @@ +#!/bin/sh + +test_description='--ancestry-path' + +# D---E-------F +# / \ \ +# B---C---G---H---I---J +# / \ +# A-------K---------------L--M +# +# D..M == E F G H I J K L M +# --ancestry-path D..M == E F H I J L M +# +# D..M -- M.t == M +# --ancestry-path D..M -- M.t == M + +. ./test-lib.sh + +test_merge () { + test_tick && + git merge -s ours -m "$2" "$1" && + git tag "$2" +} + +test_expect_success setup ' + test_commit A && + test_commit B && + test_commit C && + test_commit D && + test_commit E && + test_commit F && + git reset --hard C && + test_commit G && + test_merge E H && + test_commit I && + test_merge F J && + git reset --hard A && + test_commit K && + test_merge J L && + test_commit M +' + +test_expect_success 'rev-list D..M' ' + for c in E F G H I J K L M; do echo $c; done >expect && + git rev-list --format=%s D..M | + sed -e "/^commit /d" | + sort >actual && + test_cmp expect actual +' + +test_expect_success 'rev-list --ancestry-path D..M' ' + for c in E F H I J L M; do echo $c; done >expect && + git rev-list --ancestry-path --format=%s D..M | + sed -e "/^commit /d" | + sort >actual && + test_cmp expect actual +' + +test_expect_success 'rev-list D..M -- M.t' ' + echo M >expect && + git rev-list --format=%s D..M -- M.t | + sed -e "/^commit /d" >actual && + test_cmp expect actual +' + +test_expect_success 'rev-list --ancestry-patch D..M -- M.t' ' + echo M >expect && + git rev-list --ancestry-path --format=%s D..M -- M.t | + sed -e "/^commit /d" >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t6022-merge-rename.sh b/t/t6022-merge-rename.sh index e3f7ae8120..b66544b76d 100755 --- a/t/t6022-merge-rename.sh +++ b/t/t6022-merge-rename.sh @@ -280,7 +280,7 @@ test_expect_success 'updated working tree file should prevent the merge' ' echo "BAD: should have complained" return 1 } - diff M M.saved || { + test_cmp M M.saved || { echo "BAD: should have left M intact" return 1 } @@ -301,7 +301,7 @@ test_expect_success 'updated working tree file should prevent the merge' ' echo "BAD: should have complained" return 1 } - diff M M.saved || { + test_cmp M M.saved || { echo "BAD: should have left M intact" return 1 } diff --git a/t/t6101-rev-parse-parents.sh b/t/t6101-rev-parse-parents.sh index f105fab98e..e673c25e94 100755 --- a/t/t6101-rev-parse-parents.sh +++ b/t/t6101-rev-parse-parents.sh @@ -6,7 +6,7 @@ test_description='Test git rev-parse with different parent options' . ./test-lib.sh -. "$TEST_DIRECTORY"/t6000lib.sh # t6xxx specific functions +. "$TEST_DIRECTORY"/lib-t6000.sh # t6xxx specific functions date >path0 git update-index --add path0 diff --git a/t/t7005-editor.sh b/t/t7005-editor.sh index 5257f4d261..fe60d699a3 100755 --- a/t/t7005-editor.sh +++ b/t/t7005-editor.sh @@ -13,7 +13,7 @@ test_expect_success 'determine default editor' ' ' -if ! expr "$vi" : '^[a-z]*$' >/dev/null +if ! expr "$vi" : '[a-z]*$' >/dev/null then vi= fi @@ -38,7 +38,7 @@ test_expect_success setup ' test_commit "$msg" && echo "$msg" >expect && git show -s --format=%s > actual && - diff actual expect + test_cmp actual expect ' @@ -85,7 +85,7 @@ do git --exec-path=. commit --amend && git show -s --pretty=oneline | sed -e "s/^[0-9a-f]* //" >actual && - diff actual expect + test_cmp actual expect ' done @@ -107,7 +107,7 @@ do git --exec-path=. commit --amend && git show -s --pretty=oneline | sed -e "s/^[0-9a-f]* //" >actual && - diff actual expect + test_cmp actual expect ' done diff --git a/t/t7006-pager.sh b/t/t7006-pager.sh index 3bc7a2a796..c2a3c8e2e7 100755 --- a/t/t7006-pager.sh +++ b/t/t7006-pager.sh @@ -3,6 +3,7 @@ test_description='Test automatic use of a pager.' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-pager.sh cleanup_fail() { echo >&2 cleanup failed @@ -40,7 +41,7 @@ else fi test_expect_success 'setup' ' - unset GIT_PAGER GIT_PAGER_IN_USE && + unset GIT_PAGER GIT_PAGER_IN_USE; test_might_fail git config --unset core.pager && PAGER="cat >paginated.out" && @@ -109,7 +110,7 @@ test_expect_success TTY 'no pager with --no-pager' ' # for the first color; the text "commit" comes later. colorful() { read firstline <$1 - ! expr "$firstline" : "^[a-zA-Z]" >/dev/null + ! expr "$firstline" : "[a-zA-Z]" >/dev/null } test_expect_success 'tests can detect color' ' @@ -158,22 +159,13 @@ test_expect_success 'color when writing to a file intended for a pager' ' colorful colorful.log ' -test_expect_success 'determine default pager' ' - unset PAGER GIT_PAGER && - test_might_fail git config --unset core.pager || - cleanup_fail && - - less=$(git var GIT_PAGER) && - test -n "$less" -' - -if expr "$less" : '^[a-z][a-z]*$' >/dev/null && test_have_prereq TTY +if test_have_prereq SIMPLEPAGER && test_have_prereq TTY then - test_set_prereq SIMPLEPAGER + test_set_prereq SIMPLEPAGERTTY fi -test_expect_success SIMPLEPAGER 'default pager is used by default' ' - unset PAGER GIT_PAGER && +test_expect_success SIMPLEPAGERTTY 'default pager is used by default' ' + unset PAGER GIT_PAGER; test_might_fail git config --unset core.pager && rm -f default_pager_used || cleanup_fail && @@ -192,7 +184,7 @@ test_expect_success SIMPLEPAGER 'default pager is used by default' ' ' test_expect_success TTY 'PAGER overrides default pager' ' - unset GIT_PAGER && + unset GIT_PAGER; test_might_fail git config --unset core.pager && rm -f PAGER_used || cleanup_fail && @@ -204,7 +196,7 @@ test_expect_success TTY 'PAGER overrides default pager' ' ' test_expect_success TTY 'core.pager overrides PAGER' ' - unset GIT_PAGER && + unset GIT_PAGER; rm -f core.pager_used || cleanup_fail && diff --git a/t/t7008-grep-binary.sh b/t/t7008-grep-binary.sh new file mode 100755 index 0000000000..eb8ca88cce --- /dev/null +++ b/t/t7008-grep-binary.sh @@ -0,0 +1,102 @@ +#!/bin/sh + +test_description='git grep in binary files' + +. ./test-lib.sh + +test_expect_success 'setup' " + printf 'binary\000file\n' >a && + git add a && + git commit -m. +" + +test_expect_success 'git grep ina a' ' + echo Binary file a matches >expect && + git grep ina a >actual && + test_cmp expect actual +' + +test_expect_success 'git grep -ah ina a' ' + git grep -ah ina a >actual && + test_cmp a actual +' + +test_expect_success 'git grep -I ina a' ' + : >expect && + test_must_fail git grep -I ina a >actual && + test_cmp expect actual +' + +test_expect_success 'git grep -c ina a' ' + echo a:1 >expect && + git grep -c ina a >actual && + test_cmp expect actual +' + +test_expect_success 'git grep -l ina a' ' + echo a >expect && + git grep -l ina a >actual && + test_cmp expect actual +' + +test_expect_success 'git grep -L bar a' ' + echo a >expect && + git grep -L bar a >actual && + test_cmp expect actual +' + +test_expect_success 'git grep -q ina a' ' + : >expect && + git grep -q ina a >actual && + test_cmp expect actual +' + +test_expect_success 'git grep -F ile a' ' + git grep -F ile a +' + +test_expect_success 'git grep -Fi iLE a' ' + git grep -Fi iLE a +' + +# This test actually passes on platforms where regexec() supports the +# flag REG_STARTEND. +test_expect_failure 'git grep ile a' ' + git grep ile a +' + +test_expect_failure 'git grep .fi a' ' + git grep .fi a +' + +test_expect_success 'git grep -F y<NUL>f a' " + printf 'y\000f' >f && + git grep -f f -F a +" + +test_expect_success 'git grep -F y<NUL>x a' " + printf 'y\000x' >f && + test_must_fail git grep -f f -F a +" + +test_expect_success 'git grep -Fi Y<NUL>f a' " + printf 'Y\000f' >f && + git grep -f f -Fi a +" + +test_expect_failure 'git grep -Fi Y<NUL>x a' " + printf 'Y\000x' >f && + test_must_fail git grep -f f -Fi a +" + +test_expect_success 'git grep y<NUL>f a' " + printf 'y\000f' >f && + git grep -f f a +" + +test_expect_failure 'git grep y<NUL>x a' " + printf 'y\000x' >f && + test_must_fail git grep -f f a +" + +test_done diff --git a/t/t7010-setup.sh b/t/t7010-setup.sh index d8a7c79852..0335a9a158 100755 --- a/t/t7010-setup.sh +++ b/t/t7010-setup.sh @@ -103,14 +103,10 @@ test_expect_success 'git ls-files (relative #3)' ' git add a && ( cd a/b && - if git ls-files "../e/f" - then - echo Gaah, should have failed - exit 1 - else - : happy - fi - ) + git ls-files "../e/f" + ) >current && + echo ../e/f >expect && + test_cmp expect current ' diff --git a/t/t7407-submodule-foreach.sh b/t/t7407-submodule-foreach.sh index 2a527750ce..db9365b645 100755 --- a/t/t7407-submodule-foreach.sh +++ b/t/t7407-submodule-foreach.sh @@ -59,11 +59,13 @@ test_expect_success 'setup a submodule tree' ' sub1sha1=$(cd super/sub1 && git rev-parse HEAD) sub3sha1=$(cd super/sub3 && git rev-parse HEAD) +pwd=$(pwd) + cat > expect <<EOF Entering 'sub1' -foo1-sub1-$sub1sha1 +$pwd/clone-foo1-sub1-$sub1sha1 Entering 'sub3' -foo3-sub3-$sub3sha1 +$pwd/clone-foo3-sub3-$sub3sha1 EOF test_expect_success 'test basic "submodule foreach" usage' ' @@ -71,7 +73,9 @@ test_expect_success 'test basic "submodule foreach" usage' ' ( cd clone && git submodule update --init -- sub1 sub3 && - git submodule foreach "echo \$name-\$path-\$sha1" > ../actual + git submodule foreach "echo \$toplevel-\$name-\$path-\$sha1" > ../actual && + git config foo.bar zar && + git submodule foreach "git config --file \"\$toplevel/.git/config\" foo.bar" ) && test_cmp expect actual ' diff --git a/t/t7502-commit.sh b/t/t7502-commit.sh index 95044668ee..ac2e187a57 100755 --- a/t/t7502-commit.sh +++ b/t/t7502-commit.sh @@ -4,8 +4,76 @@ test_description='git commit porcelain-ish' . ./test-lib.sh +# Arguments: [<prefix] [<commit message>] [<commit options>] +check_summary_oneline() { + test_tick && + git commit ${3+"$3"} -m "$2" | head -1 > act && + + # branch name + SUMMARY_PREFIX="$(git name-rev --name-only HEAD)" && + + # append the "special" prefix, like "root-commit", "detached HEAD" + if test -n "$1" + then + SUMMARY_PREFIX="$SUMMARY_PREFIX ($1)" + fi + + # abbrev SHA-1 + SUMMARY_POSTFIX="$(git log -1 --pretty='format:%h')" + echo "[$SUMMARY_PREFIX $SUMMARY_POSTFIX] $2" >exp && + + test_cmp exp act +} + +test_expect_success 'output summary format' ' + + echo new >file1 && + git add file1 && + check_summary_oneline "root-commit" "initial" && + + echo change >>file1 && + git add file1 && + check_summary_oneline "" "a change" +' + +test_expect_success 'output summary format for commit with an empty diff' ' + + check_summary_oneline "" "empty" "--allow-empty" +' + +test_expect_success 'output summary format for merges' ' + + git checkout -b recursive-base && + test_commit base file1 && + + git checkout -b recursive-a recursive-base && + test_commit commit-a file1 && + + git checkout -b recursive-b recursive-base && + test_commit commit-b file1 && + + # conflict + git checkout recursive-a && + test_must_fail git merge recursive-b && + # resolve the conflict + echo commit-a > file1 && + git add file1 && + check_summary_oneline "" "Merge" +' + +output_tests_cleanup() { + # this is needed for "do not fire editor in the presence of conflicts" + git checkout master && + + # this is needed for the "partial removal" test to pass + git rm file1 && + git commit -m "cleanup" +} + test_expect_success 'the basics' ' + output_tests_cleanup && + echo doing partial >"commit is" && mkdir not && echo very much encouraged but we should >not/forbid && diff --git a/t/t7508-status.sh b/t/t7508-status.sh index 008d5711b8..a72fe3ae64 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -107,13 +107,32 @@ A dir2/added ?? untracked EOF -test_expect_success 'status -s (2)' ' +test_expect_success 'status -s' ' git status -s >output && test_cmp expect output ' +cat >expect <<\EOF +## master + M dir1/modified +A dir2/added +?? dir1/untracked +?? dir2/modified +?? dir2/untracked +?? expect +?? output +?? untracked +EOF + +test_expect_success 'status -s -b' ' + + git status -s -b >output && + test_cmp expect output + +' + cat >expect <<EOF # On branch master # Changes to be committed: @@ -437,6 +456,25 @@ test_expect_success 'status -s with color.status' ' ' cat >expect <<\EOF +## <GREEN>master<RESET> + <RED>M<RESET> dir1/modified +<GREEN>A<RESET> dir2/added +<BLUE>??<RESET> dir1/untracked +<BLUE>??<RESET> dir2/modified +<BLUE>??<RESET> dir2/untracked +<BLUE>??<RESET> expect +<BLUE>??<RESET> output +<BLUE>??<RESET> untracked +EOF + +test_expect_success 'status -s -b with color.status' ' + + git status -s -b | test_decode_color >output && + test_cmp expect output + +' + +cat >expect <<\EOF M dir1/modified A dir2/added ?? dir1/untracked @@ -469,6 +507,13 @@ test_expect_success 'status --porcelain ignores color.status' ' git config --unset color.status git config --unset color.ui +test_expect_success 'status --porcelain ignores -b' ' + + git status --porcelain -b >output && + test_cmp expect output + +' + cat >expect <<\EOF # On branch master # Changes to be committed: @@ -763,4 +808,131 @@ test_expect_success POSIXPERM 'status succeeds in a read-only repository' ' (exit $status) ' +cat > expect << EOF +# On branch master +# Changed but not updated: +# (use "git add <file>..." to update what will be committed) +# (use "git checkout -- <file>..." to discard changes in working directory) +# +# modified: dir1/modified +# +# Untracked files: +# (use "git add <file>..." to include in what will be committed) +# +# dir1/untracked +# dir2/modified +# dir2/untracked +# expect +# output +# untracked +no changes added to commit (use "git add" and/or "git commit -a") +EOF + +test_expect_success '--ignore-submodules=untracked suppresses submodules with untracked content' ' + echo modified > sm/untracked && + git status --ignore-submodules=untracked > output && + test_cmp expect output +' + +test_expect_success '--ignore-submodules=dirty suppresses submodules with untracked content' ' + git status --ignore-submodules=dirty > output && + test_cmp expect output +' + +test_expect_success '--ignore-submodules=dirty suppresses submodules with modified content' ' + echo modified > sm/foo && + git status --ignore-submodules=dirty > output && + test_cmp expect output +' + +cat > expect << EOF +# On branch master +# Changed but not updated: +# (use "git add <file>..." to update what will be committed) +# (use "git checkout -- <file>..." to discard changes in working directory) +# (commit or discard the untracked or modified content in submodules) +# +# modified: dir1/modified +# modified: sm (modified content) +# +# Untracked files: +# (use "git add <file>..." to include in what will be committed) +# +# dir1/untracked +# dir2/modified +# dir2/untracked +# expect +# output +# untracked +no changes added to commit (use "git add" and/or "git commit -a") +EOF + +test_expect_success "--ignore-submodules=untracked doesn't suppress submodules with modified content" ' + git status --ignore-submodules=untracked > output && + test_cmp expect output +' + +head2=$(cd sm && git commit -q -m "2nd commit" foo && git rev-parse --short=7 --verify HEAD) + +cat > expect << EOF +# On branch master +# Changed but not updated: +# (use "git add <file>..." to update what will be committed) +# (use "git checkout -- <file>..." to discard changes in working directory) +# +# modified: dir1/modified +# modified: sm (new commits) +# +# Submodules changed but not updated: +# +# * sm $head...$head2 (1): +# > 2nd commit +# +# Untracked files: +# (use "git add <file>..." to include in what will be committed) +# +# dir1/untracked +# dir2/modified +# dir2/untracked +# expect +# output +# untracked +no changes added to commit (use "git add" and/or "git commit -a") +EOF + +test_expect_success "--ignore-submodules=untracked doesn't suppress submodule summary" ' + git status --ignore-submodules=untracked > output && + test_cmp expect output +' + +test_expect_success "--ignore-submodules=dirty doesn't suppress submodule summary" ' + git status --ignore-submodules=dirty > output && + test_cmp expect output +' + +cat > expect << EOF +# On branch master +# Changed but not updated: +# (use "git add <file>..." to update what will be committed) +# (use "git checkout -- <file>..." to discard changes in working directory) +# +# modified: dir1/modified +# +# Untracked files: +# (use "git add <file>..." to include in what will be committed) +# +# dir1/untracked +# dir2/modified +# dir2/untracked +# expect +# output +# untracked +no changes added to commit (use "git add" and/or "git commit -a") +EOF + +test_expect_success "--ignore-submodules=all suppresses submodule summary" ' + git status --ignore-submodules=all > output && + test_cmp expect output +' + test_done diff --git a/t/t7509-commit.sh b/t/t7509-commit.sh index d52c060b06..3ea33db6c7 100755 --- a/t/t7509-commit.sh +++ b/t/t7509-commit.sh @@ -83,6 +83,52 @@ test_expect_success '--amend option copies authorship' ' test_cmp expect actual ' +sha1_file() { + echo "$*" | sed "s#..#.git/objects/&/#" +} +remove_object() { + rm -f $(sha1_file "$*") +} +no_reflog() { + cp .git/config .git/config.saved && + echo "[core] logallrefupdates = false" >>.git/config && + test_when_finished "mv -f .git/config.saved .git/config" && + + if test -e .git/logs + then + mv .git/logs . && + test_when_finished "mv logs .git/" + fi +} + +test_expect_success '--amend option with empty author' ' + git cat-file commit Initial >tmp && + sed "s/author [^<]* </author </" tmp >empty-author && + no_reflog && + sha=$(git hash-object -t commit -w empty-author) && + test_when_finished "remove_object $sha" && + git checkout $sha && + test_when_finished "git checkout Initial" && + echo "Empty author test" >>foo && + test_tick && + ! git commit -a -m "empty author" --amend 2>err && + grep "empty ident" err +' + +test_expect_success '--amend option with missing author' ' + git cat-file commit Initial >tmp && + sed "s/author [^<]* </author </" tmp >malformed && + no_reflog && + sha=$(git hash-object -t commit -w malformed) && + test_when_finished "remove_object $sha" && + git checkout $sha && + test_when_finished "git checkout Initial" && + echo "Missing author test" >>foo && + test_tick && + ! git commit -a -m "malformed author" --amend 2>err && + grep "empty ident" err +' + test_expect_success '--reset-author makes the commit ours even with --amend option' ' git checkout Initial && echo "Test 6" >>foo && diff --git a/t/t7604-merge-custom-message.sh b/t/t7604-merge-custom-message.sh index 269cfdf267..9114785ef7 100755 --- a/t/t7604-merge-custom-message.sh +++ b/t/t7604-merge-custom-message.sh @@ -6,6 +6,15 @@ Testing merge when using a custom message for the merge commit.' . ./test-lib.sh +create_merge_msgs() { + echo >exp.subject "custom message" + + cp exp.subject exp.log && + echo >>exp.log "" && + echo >>exp.log "* commit 'c2':" && + echo >>exp.log " c2" +} + test_expect_success 'setup' ' echo c0 > c0.c && git add c0.c && @@ -19,16 +28,23 @@ test_expect_success 'setup' ' echo c2 > c2.c && git add c2.c && git commit -m c2 && - git tag c2 + git tag c2 && + create_merge_msgs ' test_expect_success 'merge c2 with a custom message' ' git reset --hard c1 && - echo >expected "custom message" && - git merge -m "custom message" c2 && + git merge -m "$(cat exp.subject)" c2 && + git cat-file commit HEAD | sed -e "1,/^$/d" >actual && + test_cmp exp.subject actual +' + +test_expect_success 'merge --log appends to custom message' ' + git reset --hard c1 && + git merge --log -m "$(cat exp.subject)" c2 && git cat-file commit HEAD | sed -e "1,/^$/d" >actual && - test_cmp expected actual + test_cmp exp.log actual ' test_done diff --git a/t/t7002-grep.sh b/t/t7810-grep.sh index e249c3ed41..8a6322765c 100755 --- a/t/t7002-grep.sh +++ b/t/t7810-grep.sh @@ -60,7 +60,7 @@ do echo ${HC}file:5:foo_mmap bar mmap baz } >expected && git grep -n -w -e mmap $H >actual && - diff expected actual + test_cmp expected actual ' test_expect_success "grep -w $L (w)" ' @@ -74,7 +74,7 @@ do echo ${HC}x:1:x x xx x } >expected && git grep -n -w -e "x xx* x" $H >actual && - diff expected actual + test_cmp expected actual ' test_expect_success "grep -w $L (y-1)" ' @@ -82,7 +82,7 @@ do echo ${HC}y:1:y yy } >expected && git grep -n -w -e "^y" $H >actual && - diff expected actual + test_cmp expected actual ' test_expect_success "grep -w $L (y-2)" ' @@ -93,7 +93,7 @@ do cat actual false else - diff expected actual + test_cmp expected actual fi ' @@ -105,14 +105,14 @@ do cat actual false else - diff expected actual + test_cmp expected actual fi ' test_expect_success "grep $L (t-1)" ' echo "${HC}t/t:1:test" >expected && git grep -n -e test $H >actual && - diff expected actual + test_cmp expected actual ' test_expect_success "grep $L (t-2)" ' @@ -121,7 +121,7 @@ do cd t && git grep -n -e test $H ) >actual && - diff expected actual + test_cmp expected actual ' test_expect_success "grep $L (t-3)" ' @@ -130,7 +130,7 @@ do cd t && git grep --full-name -n -e test $H ) >actual && - diff expected actual + test_cmp expected actual ' test_expect_success "grep -c $L (no /dev/null)" ' diff --git a/t/t7811-grep-open.sh b/t/t7811-grep-open.sh new file mode 100755 index 0000000000..c110441344 --- /dev/null +++ b/t/t7811-grep-open.sh @@ -0,0 +1,153 @@ +#!/bin/sh + +test_description='git grep --open-files-in-pager +' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-pager.sh +unset PAGER GIT_PAGER + +test_expect_success 'setup' ' + test_commit initial grep.h " +enum grep_pat_token { + GREP_PATTERN, + GREP_PATTERN_HEAD, + GREP_PATTERN_BODY, + GREP_AND, + GREP_OPEN_PAREN, + GREP_CLOSE_PAREN, + GREP_NOT, + GREP_OR, +};" && + + test_commit add-user revision.c " + } + if (seen_dashdash) + read_pathspec_from_stdin(revs, &sb, prune); + strbuf_release(&sb); +} + +static void add_grep(struct rev_info *revs, const char *ptn, enum grep_pat_token what) +{ + append_grep_pattern(&revs->grep_filter, ptn, \"command line\", 0, what); +" && + + mkdir subdir && + test_commit subdir subdir/grep.c "enum grep_pat_token" && + + test_commit uninteresting unrelated "hello, world" && + + echo GREP_PATTERN >untracked +' + +test_expect_success SIMPLEPAGER 'git grep -O' ' + cat >$less <<-\EOF && + #!/bin/sh + printf "%s\n" "$@" >pager-args + EOF + chmod +x $less && + cat >expect.less <<-\EOF && + +/*GREP_PATTERN + grep.h + EOF + echo grep.h >expect.notless && + >empty && + + PATH=.:$PATH git grep -O GREP_PATTERN >out && + { + test_cmp expect.less pager-args || + test_cmp expect.notless pager-args + } && + test_cmp empty out +' + +test_expect_success 'git grep -O --cached' ' + test_must_fail git grep --cached -O GREP_PATTERN >out 2>msg && + grep open-files-in-pager msg +' + +test_expect_success 'git grep -O --no-index' ' + rm -f expect.less pager-args out && + cat >expect <<-\EOF && + grep.h + untracked + EOF + >empty && + + ( + GIT_PAGER='\''printf "%s\n" >pager-args'\'' && + export GIT_PAGER && + git grep --no-index -O GREP_PATTERN >out + ) && + test_cmp expect pager-args && + test_cmp empty out +' + +test_expect_success 'setup: fake "less"' ' + cat >less <<-\EOF && + #!/bin/sh + printf "%s\n" "$@" >actual + EOF + chmod +x less +' + +test_expect_success 'git grep -O jumps to line in less' ' + cat >expect <<-\EOF && + +/*GREP_PATTERN + grep.h + EOF + >empty && + + GIT_PAGER=./less git grep -O GREP_PATTERN >out && + test_cmp expect actual && + test_cmp empty out && + + git grep -O./less GREP_PATTERN >out2 && + test_cmp expect actual && + test_cmp empty out2 +' + +test_expect_success 'modified file' ' + rm -f actual && + cat >expect <<-\EOF && + +/*enum grep_pat_token + grep.h + revision.c + subdir/grep.c + unrelated + EOF + >empty && + + echo "enum grep_pat_token" >unrelated && + test_when_finished "git checkout HEAD unrelated" && + GIT_PAGER=./less git grep -F -O "enum grep_pat_token" >out && + test_cmp expect actual && + test_cmp empty out +' + +test_expect_success 'run from subdir' ' + rm -f actual && + echo grep.c >expect && + >empty && + + ( + cd subdir && + export GIT_PAGER && + GIT_PAGER='\''printf "%s\n" >../args'\'' && + git grep -O "enum grep_pat_token" >../out && + git grep -O"pwd >../dir; :" "enum grep_pat_token" >../out2 + ) && + case $(cat dir) in + *subdir) + : good + ;; + *) + false + ;; + esac && + test_cmp expect args && + test_cmp empty out && + test_cmp empty out2 +' + +test_done diff --git a/t/t8006-blame-textconv.sh b/t/t8006-blame-textconv.sh new file mode 100755 index 0000000000..9ad96d4d32 --- /dev/null +++ b/t/t8006-blame-textconv.sh @@ -0,0 +1,80 @@ +#!/bin/sh + +test_description='git blame textconv support' +. ./test-lib.sh + +find_blame() { + sed -e 's/^[^(]*//' +} + +cat >helper <<'EOF' +#!/bin/sh +sed 's/^/converted: /' "$@" +EOF +chmod +x helper + +test_expect_success 'setup ' ' + echo test 1 >one.bin && + echo test number 2 >two.bin && + git add . && + GIT_AUTHOR_NAME=Number1 git commit -a -m First --date="2010-01-01 18:00:00" && + echo test 1 version 2 >one.bin && + echo test number 2 version 2 >>two.bin && + GIT_AUTHOR_NAME=Number2 git commit -a -m Second --date="2010-01-01 20:00:00" +' + +cat >expected <<EOF +(Number2 2010-01-01 20:00:00 +0000 1) test 1 version 2 +EOF + +test_expect_success 'no filter specified' ' + git blame one.bin >blame && + find_blame Number2 <blame >result && + test_cmp expected result +' + +test_expect_success 'setup textconv filters' ' + echo "*.bin diff=test" >.gitattributes && + git config diff.test.textconv ./helper && + git config diff.test.cachetextconv false +' + +test_expect_success 'blame with --no-textconv' ' + git blame --no-textconv one.bin >blame && + find_blame <blame> result && + test_cmp expected result +' + +cat >expected <<EOF +(Number2 2010-01-01 20:00:00 +0000 1) converted: test 1 version 2 +EOF + +test_expect_success 'basic blame on last commit' ' + git blame one.bin >blame && + find_blame <blame >result && + test_cmp expected result +' + +cat >expected <<EOF +(Number1 2010-01-01 18:00:00 +0000 1) converted: test number 2 +(Number2 2010-01-01 20:00:00 +0000 2) converted: test number 2 version 2 +EOF + +test_expect_success 'blame --textconv going through revisions' ' + git blame --textconv two.bin >blame && + find_blame <blame >result && + test_cmp expected result +' + +test_expect_success 'make a new commit' ' + echo "test number 2 version 3" >>two.bin && + GIT_AUTHOR_NAME=Number3 git commit -a -m Third --date="2010-01-01 22:00:00" +' + +test_expect_success 'blame from previous revision' ' + git blame HEAD^ two.bin >blame && + find_blame <blame >result && + test_cmp expected result +' + +test_done diff --git a/t/t8007-cat-file-textconv.sh b/t/t8007-cat-file-textconv.sh new file mode 100755 index 0000000000..38ac05e4a0 --- /dev/null +++ b/t/t8007-cat-file-textconv.sh @@ -0,0 +1,70 @@ +#!/bin/sh + +test_description='git cat-file textconv support' +. ./test-lib.sh + +cat >helper <<'EOF' +#!/bin/sh +sed 's/^/converted: /' "$@" +EOF +chmod +x helper + +test_expect_success 'setup ' ' + echo test >one.bin && + git add . && + GIT_AUTHOR_NAME=Number1 git commit -a -m First --date="2010-01-01 18:00:00" && + echo test version 2 >one.bin && + GIT_AUTHOR_NAME=Number2 git commit -a -m Second --date="2010-01-01 20:00:00" +' + +cat >expected <<EOF +fatal: git cat-file --textconv: unable to run textconv on :one.bin +EOF + +test_expect_success 'no filter specified' ' + git cat-file --textconv :one.bin 2>result + test_cmp expected result +' + +test_expect_success 'setup textconv filters' ' + echo "*.bin diff=test" >.gitattributes && + git config diff.test.textconv ./helper && + git config diff.test.cachetextconv false +' + +cat >expected <<EOF +test version 2 +EOF + +test_expect_success 'cat-file without --textconv' ' + git cat-file blob :one.bin >result && + test_cmp expected result +' + +cat >expected <<EOF +test +EOF + +test_expect_success 'cat-file without --textconv on previous commit' ' + git cat-file -p HEAD^:one.bin >result && + test_cmp expected result +' + +cat >expected <<EOF +converted: test version 2 +EOF + +test_expect_success 'cat-file --textconv on last commit' ' + git cat-file --textconv :one.bin >result && + test_cmp expected result +' + +cat >expected <<EOF +converted: test +EOF + +test_expect_success 'cat-file --textconv on previous commit' ' + git cat-file --textconv HEAD^:one.bin >result && + test_cmp expected result +' +test_done diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index 640b3d2bb4..382ab6c98a 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -918,4 +918,81 @@ test_expect_success '--no-bcc overrides sendemail.bcc' ' ! grep "RCPT TO:<other@ex.com>" stdout ' +cat >email-using-8bit <<EOF +From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 +Message-Id: <bogus-message-id@example.com> +From: author@example.com +Date: Sat, 12 Jun 2010 15:53:58 +0200 +Subject: subject goes here + +Dieser deutsche Text enthält einen Umlaut! +EOF + +cat >content-type-decl <<EOF +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +EOF + +test_expect_success 'asks about and fixes 8bit encodings' ' + clean_fake_sendmail && + echo | + git send-email --from=author@example.com --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-8bit >stdout && + grep "do not declare a Content-Transfer-Encoding" stdout && + grep email-using-8bit stdout && + grep "Which 8bit encoding" stdout && + egrep "Content|MIME" msgtxt1 >actual && + test_cmp actual content-type-decl +' + +test_expect_success 'sendemail.8bitEncoding works' ' + clean_fake_sendmail && + git config sendemail.assume8bitEncoding UTF-8 && + echo bogus | + git send-email --from=author@example.com --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-8bit >stdout && + egrep "Content|MIME" msgtxt1 >actual && + test_cmp actual content-type-decl +' + +test_expect_success '--8bit-encoding overrides sendemail.8bitEncoding' ' + clean_fake_sendmail && + git config sendemail.assume8bitEncoding "bogus too" && + echo bogus | + git send-email --from=author@example.com --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + --8bit-encoding=UTF-8 \ + email-using-8bit >stdout && + egrep "Content|MIME" msgtxt1 >actual && + test_cmp actual content-type-decl +' + +cat >email-using-8bit <<EOF +From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 +Message-Id: <bogus-message-id@example.com> +From: author@example.com +Date: Sat, 12 Jun 2010 15:53:58 +0200 +Subject: Dieser Betreff enthält auch einen Umlaut! + +Nothing to see here. +EOF + +cat >expected <<EOF +Subject: =?UTF-8?q?Dieser=20Betreff=20enth=C3=A4lt=20auch=20einen=20Umlaut!?= +EOF + +test_expect_success '--8bit-encoding also treats subject' ' + clean_fake_sendmail && + echo bogus | + git send-email --from=author@example.com --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + --8bit-encoding=UTF-8 \ + email-using-8bit >stdout && + grep "Subject" msgtxt1 >actual && + test_cmp expected actual +' + test_done diff --git a/t/t9129-git-svn-i18n-commitencoding.sh b/t/t9129-git-svn-i18n-commitencoding.sh index b9224bdb20..1e9a2eb12b 100755 --- a/t/t9129-git-svn-i18n-commitencoding.sh +++ b/t/t9129-git-svn-i18n-commitencoding.sh @@ -14,10 +14,22 @@ compare_git_head_with () { test_cmp current "$1" } +a_utf8_locale=$(locale -a | sed -n '/\.[uU][tT][fF]-*8$/{ + p + q +}') + +if test -n "$a_utf8_locale" +then + test_set_prereq UTF8 +else + say "UTF-8 locale not available, some tests are skipped" +fi + compare_svn_head_with () { # extract just the log message and strip out committer info. # don't use --limit here since svn 1.1.x doesn't have it, - LC_ALL=en_US.UTF-8 svn log `git svn info --url` | perl -w -e ' + LC_ALL="$a_utf8_locale" svn log `git svn info --url` | perl -w -e ' use bytes; $/ = ("-"x72) . "\n"; my @x = <STDIN>; @@ -69,12 +81,6 @@ do ' done -if locale -a |grep -q en_US.utf8; then - test_set_prereq UTF8 -else - say "UTF-8 locale not available, test skipped" -fi - test_expect_success UTF8 'ISO-8859-1 should match UTF-8 in svn' ' ( cd ISO8859-1 && diff --git a/t/t9200-git-cvsexportcommit.sh b/t/t9200-git-cvsexportcommit.sh index fc3795dc98..61bcb8fc86 100755 --- a/t/t9200-git-cvsexportcommit.sh +++ b/t/t9200-git-cvsexportcommit.sh @@ -63,10 +63,10 @@ test_expect_success \ check_entries B "newfile2.txt/1.1/" && check_entries C "newfile3.png/1.1/-kb" && check_entries D "newfile4.png/1.1/-kb" && - diff A/newfile1.txt ../A/newfile1.txt && - diff B/newfile2.txt ../B/newfile2.txt && - diff C/newfile3.png ../C/newfile3.png && - diff D/newfile4.png ../D/newfile4.png + test_cmp A/newfile1.txt ../A/newfile1.txt && + test_cmp B/newfile2.txt ../B/newfile2.txt && + test_cmp C/newfile3.png ../C/newfile3.png && + test_cmp D/newfile4.png ../D/newfile4.png )' test_expect_success \ @@ -89,10 +89,10 @@ test_expect_success \ check_entries D "newfile4.png/1.2/-kb" && check_entries E "newfile5.txt/1.1/" && check_entries F "newfile6.png/1.1/-kb" && - diff A/newfile1.txt ../A/newfile1.txt && - diff D/newfile4.png ../D/newfile4.png && - diff E/newfile5.txt ../E/newfile5.txt && - diff F/newfile6.png ../F/newfile6.png + test_cmp A/newfile1.txt ../A/newfile1.txt && + test_cmp D/newfile4.png ../D/newfile4.png && + test_cmp E/newfile5.txt ../E/newfile5.txt && + test_cmp F/newfile6.png ../F/newfile6.png )' # Should fail (but only on the git cvsexportcommit stage) @@ -137,9 +137,9 @@ test_expect_success \ check_entries D "" && check_entries E "newfile5.txt/1.1/" && check_entries F "newfile6.png/1.1/-kb" && - diff A/newfile1.txt ../A/newfile1.txt && - diff E/newfile5.txt ../E/newfile5.txt && - diff F/newfile6.png ../F/newfile6.png + test_cmp A/newfile1.txt ../A/newfile1.txt && + test_cmp E/newfile5.txt ../E/newfile5.txt && + test_cmp F/newfile6.png ../F/newfile6.png )' test_expect_success \ @@ -155,8 +155,8 @@ test_expect_success \ check_entries D "" && check_entries E "newfile5.txt/1.1/" && check_entries F "newfile6.png/1.1/-kb" && - diff E/newfile5.txt ../E/newfile5.txt && - diff F/newfile6.png ../F/newfile6.png + test_cmp E/newfile5.txt ../E/newfile5.txt && + test_cmp F/newfile6.png ../F/newfile6.png )' test_expect_success \ diff --git a/t/t9400-git-cvsserver-server.sh b/t/t9400-git-cvsserver-server.sh index daef2d6c23..86395065cf 100755 --- a/t/t9400-git-cvsserver-server.sh +++ b/t/t9400-git-cvsserver-server.sh @@ -48,7 +48,9 @@ test_expect_success 'setup' ' git pull secondroot master && git clone -q --bare "$WORKDIR/.git" "$SERVERDIR" >/dev/null 2>&1 && GIT_DIR="$SERVERDIR" git config --bool gitcvs.enabled true && - GIT_DIR="$SERVERDIR" git config gitcvs.logfile "$SERVERDIR/gitcvs.log" + GIT_DIR="$SERVERDIR" git config gitcvs.logfile "$SERVERDIR/gitcvs.log" && + GIT_DIR="$SERVERDIR" git config gitcvs.authdb "$SERVERDIR/auth.db" && + echo cvsuser:cvGVEarMLnhlA > "$SERVERDIR/auth.db" ' # note that cvs doesn't accept absolute pathnames @@ -94,6 +96,14 @@ git END VERIFICATION REQUEST EOF +cat >login-git-ok <<EOF +BEGIN VERIFICATION REQUEST +$SERVERDIR +cvsuser +Ah<Z:yZZ30 e +END VERIFICATION REQUEST +EOF + test_expect_success 'pserver authentication' \ 'cat request-anonymous | git-cvsserver pserver >log 2>&1 && sed -ne \$p log | grep "^I LOVE YOU\$"' @@ -107,6 +117,10 @@ test_expect_success 'pserver authentication failure (non-anonymous user)' \ fi && sed -ne \$p log | grep "^I HATE YOU\$"' +test_expect_success 'pserver authentication success (non-anonymous user with password)' \ + 'cat login-git-ok | git-cvsserver pserver >log 2>&1 && + sed -ne \$p log | grep "^I LOVE YOU\$"' + test_expect_success 'pserver authentication (login)' \ 'cat login-anonymous | git-cvsserver pserver >log 2>&1 && sed -ne \$p log | grep "^I LOVE YOU\$"' @@ -435,7 +449,7 @@ test_expect_success 'cvs update (-p)' ' rm -f failures && for i in merge no-lf empty really-empty; do GIT_CONFIG="$git_config" cvs update -p "$i" >$i.out - diff $i.out ../$i >>failures 2>&1 + test_cmp $i.out ../$i >>failures 2>&1 done && test -z "$(cat failures)" ' diff --git a/t/t9500-gitweb-standalone-no-errors.sh b/t/t9500-gitweb-standalone-no-errors.sh index 63b6b060e6..4f2b9b062b 100755 --- a/t/t9500-gitweb-standalone-no-errors.sh +++ b/t/t9500-gitweb-standalone-no-errors.sh @@ -647,4 +647,33 @@ test_expect_success \ gitweb_run "p=.git;a=summary"' test_debug 'cat gitweb.log' +# ---------------------------------------------------------------------- +# syntax highlighting + +cat >>gitweb_config.perl <<\EOF +$feature{'highlight'}{'override'} = 1; +EOF + +highlight --version >/dev/null 2>&1 +if [ $? -eq 127 ]; then + say "Skipping syntax highlighting test, because 'highlight' was not found" +else + test_set_prereq HIGHLIGHT +fi + +test_expect_success HIGHLIGHT \ + 'syntax highlighting (no highlight)' \ + 'git config gitweb.highlight yes && + gitweb_run "p=.git;a=blob;f=file"' +test_debug 'cat gitweb.log' + +test_expect_success HIGHLIGHT \ + 'syntax highlighting (highlighted)' \ + 'git config gitweb.highlight yes && + echo "#!/usr/bin/sh" > test.sh && + git add test.sh && + git commit -m "Add test.sh" && + gitweb_run "p=.git;a=blob;f=test.sh"' +test_debug 'cat gitweb.log' + test_done diff --git a/t/test-lib.sh b/t/test-lib.sh index 454880ac7d..367f0537cd 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -75,7 +75,6 @@ export GIT_MERGE_VERBOSITY export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME export GIT_COMMITTER_EMAIL GIT_COMMITTER_NAME export EDITOR -GIT_TEST_CMP=${GIT_TEST_CMP:-diff -u} # Protect ourselves from common misconfiguration to export # CDPATH into the environment @@ -740,6 +739,16 @@ export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_CONFIG_NOGLOB . ../GIT-BUILD-OPTIONS +if test -z "$GIT_TEST_CMP" +then + if test -n "$GIT_TEST_CMP_USE_COPIED_CONTEXT" + then + GIT_TEST_CMP="$DIFF -c" + else + GIT_TEST_CMP="$DIFF -u" + fi +fi + GITPERLLIB=$(pwd)/../perl/blib/lib:$(pwd)/../perl/blib/arch/auto/Git export GITPERLLIB test -d ../templates/blt || { @@ -25,6 +25,10 @@ #include "cache.h" #include "quote.h" +void do_nothing(size_t unused) +{ +} + /* Get a trace file descriptor from GIT_TRACE env variable. */ static int get_trace_fd(int *need_close) { @@ -72,6 +76,7 @@ void trace_printf(const char *fmt, ...) if (!fd) return; + set_try_to_free_routine(do_nothing); /* is never reset */ strbuf_init(&buf, 64); va_start(ap, fmt); len = vsnprintf(buf.buf, strbuf_avail(&buf), fmt, ap); @@ -103,6 +108,7 @@ void trace_argv_printf(const char **argv, const char *fmt, ...) if (!fd) return; + set_try_to_free_routine(do_nothing); /* is never reset */ strbuf_init(&buf, 64); va_start(ap, fmt); len = vsnprintf(buf.buf, strbuf_avail(&buf), fmt, ap); diff --git a/transport-helper.c b/transport-helper.c index 0381de5368..191fbf798a 100644 --- a/transport-helper.c +++ b/transport-helper.c @@ -727,10 +727,10 @@ static int push_refs_with_export(struct transport *transport, private = apply_refspecs(data->refspecs, data->refspec_nr, ref->name); if (private && !get_sha1(private, sha1)) { strbuf_addf(&buf, "^%s", private); - string_list_append(strbuf_detach(&buf, NULL), &revlist_args); + string_list_append(&revlist_args, strbuf_detach(&buf, NULL)); } - string_list_append(ref->name, &revlist_args); + string_list_append(&revlist_args, ref->name); } diff --git a/transport.c b/transport.c index 8ce39364a1..4dba6f8815 100644 --- a/transport.c +++ b/transport.c @@ -9,6 +9,7 @@ #include "dir.h" #include "refs.h" #include "branch.h" +#include "url.h" /* rsync support */ @@ -871,54 +872,6 @@ static int is_file(const char *url) return S_ISREG(buf.st_mode); } -static int isurlschemechar(int first_flag, int ch) -{ - /* - * The set of valid URL schemes, as per STD66 (RFC3986) is - * '[A-Za-z][A-Za-z0-9+.-]*'. But use sightly looser check - * of '[A-Za-z0-9][A-Za-z0-9+.-]*' because earlier version - * of check used '[A-Za-z0-9]+' so not to break any remote - * helpers. - */ - int alphanumeric, special; - alphanumeric = ch > 0 && isalnum(ch); - special = ch == '+' || ch == '-' || ch == '.'; - return alphanumeric || (!first_flag && special); -} - -static int is_url(const char *url) -{ - const char *url2, *first_slash; - - if (!url) - return 0; - url2 = url; - first_slash = strchr(url, '/'); - - /* Input with no slash at all or slash first can't be URL. */ - if (!first_slash || first_slash == url) - return 0; - /* Character before must be : and next must be /. */ - if (first_slash[-1] != ':' || first_slash[1] != '/') - return 0; - /* There must be something before the :// */ - if (first_slash == url + 1) - return 0; - /* - * Check all characters up to first slash - 1. Only alphanum - * is allowed. - */ - url2 = url; - while (url2 < first_slash - 1) { - if (!isurlschemechar(url2 == url, (unsigned char)*url2)) - return 0; - url2++; - } - - /* Valid enough. */ - return 1; -} - static int external_specification_len(const char *url) { return strchr(url, ':') - url; @@ -946,7 +899,7 @@ struct transport *transport_get(struct remote *remote, const char *url) if (url) { const char *p = url; - while (isurlschemechar(p == url, *p)) + while (is_urlschemechar(p == url, *p)) p++; if (!prefixcmp(p, "::")) helper = xstrndup(url, p - url); diff --git a/unpack-trees.c b/unpack-trees.c index c29a9e067f..8cf0da317d 100644 --- a/unpack-trees.c +++ b/unpack-trees.c @@ -279,9 +279,11 @@ static void add_same_unmerged(struct cache_entry *ce, static int unpack_index_entry(struct cache_entry *ce, struct unpack_trees_options *o) { - struct cache_entry *src[5] = { ce, NULL, }; + struct cache_entry *src[5] = { NULL }; int ret; + src[0] = ce; + mark_ce_used(ce, o); if (ce_stage(ce)) { if (o->skip_unmerged) { @@ -520,9 +522,17 @@ static int find_cache_pos(struct traverse_info *info, const char *ce_name, *ce_slash; int cmp, ce_len; - if (!ce_in_traverse_path(ce, info)) + if (ce->ce_flags & CE_UNPACKED) { + /* + * cache_bottom entry is already unpacked, so + * we can never match it; don't check it + * again. + */ + if (pos == o->cache_bottom) + ++o->cache_bottom; continue; - if (ce->ce_flags & CE_UNPACKED) + } + if (!ce_in_traverse_path(ce, info)) continue; ce_name = ce->name + pfxlen; ce_slash = strchr(ce_name, '/'); @@ -854,7 +864,7 @@ static int verify_uptodate_1(struct cache_entry *ce, { struct stat st; - if (o->index_only || (!ce_skip_worktree(ce) && (o->reset || ce_uptodate(ce)))) + if (o->index_only || (!((ce->ce_flags & CE_VALID) || ce_skip_worktree(ce)) && (o->reset || ce_uptodate(ce)))) return 0; if (!lstat(ce->name, &st)) { @@ -0,0 +1,126 @@ +#include "cache.h" + +int is_urlschemechar(int first_flag, int ch) +{ + /* + * The set of valid URL schemes, as per STD66 (RFC3986) is + * '[A-Za-z][A-Za-z0-9+.-]*'. But use sightly looser check + * of '[A-Za-z0-9][A-Za-z0-9+.-]*' because earlier version + * of check used '[A-Za-z0-9]+' so not to break any remote + * helpers. + */ + int alphanumeric, special; + alphanumeric = ch > 0 && isalnum(ch); + special = ch == '+' || ch == '-' || ch == '.'; + return alphanumeric || (!first_flag && special); +} + +int is_url(const char *url) +{ + const char *url2, *first_slash; + + if (!url) + return 0; + url2 = url; + first_slash = strchr(url, '/'); + + /* Input with no slash at all or slash first can't be URL. */ + if (!first_slash || first_slash == url) + return 0; + /* Character before must be : and next must be /. */ + if (first_slash[-1] != ':' || first_slash[1] != '/') + return 0; + /* There must be something before the :// */ + if (first_slash == url + 1) + return 0; + /* + * Check all characters up to first slash - 1. Only alphanum + * is allowed. + */ + url2 = url; + while (url2 < first_slash - 1) { + if (!is_urlschemechar(url2 == url, (unsigned char)*url2)) + return 0; + url2++; + } + + /* Valid enough. */ + return 1; +} + +static int url_decode_char(const char *q) +{ + int i; + unsigned char val = 0; + for (i = 0; i < 2; i++) { + unsigned char c = *q++; + val <<= 4; + if (c >= '0' && c <= '9') + val += c - '0'; + else if (c >= 'a' && c <= 'f') + val += c - 'a' + 10; + else if (c >= 'A' && c <= 'F') + val += c - 'A' + 10; + else + return -1; + } + return val; +} + +static char *url_decode_internal(const char **query, const char *stop_at, struct strbuf *out) +{ + const char *q = *query; + + do { + unsigned char c = *q; + + if (!c) + break; + if (stop_at && strchr(stop_at, c)) { + q++; + break; + } + + if (c == '%') { + int val = url_decode_char(q + 1); + if (0 <= val) { + strbuf_addch(out, val); + q += 3; + continue; + } + } + + if (c == '+') + strbuf_addch(out, ' '); + else + strbuf_addch(out, c); + q++; + } while (1); + *query = q; + return strbuf_detach(out, NULL); +} + +char *url_decode(const char *url) +{ + struct strbuf out = STRBUF_INIT; + const char *colon = strchr(url, ':'); + + /* Skip protocol part if present */ + if (colon && url < colon) { + strbuf_add(&out, url, colon - url); + url = colon; + } + return url_decode_internal(&url, NULL, &out); +} + +char *url_decode_parameter_name(const char **query) +{ + struct strbuf out = STRBUF_INIT; + return url_decode_internal(query, "&=", &out); +} + +char *url_decode_parameter_value(const char **query) +{ + struct strbuf out = STRBUF_INIT; + return url_decode_internal(query, "&", &out); +} @@ -0,0 +1,10 @@ +#ifndef URL_H +#define URL_H + +extern int is_url(const char *url); +extern int is_urlschemechar(int first_flag, int ch); +extern char *url_decode(const char *url); +extern char *url_decode_parameter_name(const char **query); +extern char *url_decode_parameter_value(const char **query); + +#endif /* URL_H */ @@ -5,7 +5,7 @@ */ #include "git-compat-util.h" -static void report(const char *prefix, const char *err, va_list params) +void vreportf(const char *prefix, const char *err, va_list params) { char msg[4096]; vsnprintf(msg, sizeof(msg), err, params); @@ -14,24 +14,24 @@ static void report(const char *prefix, const char *err, va_list params) static NORETURN void usage_builtin(const char *err, va_list params) { - report("usage: ", err, params); + vreportf("usage: ", err, params); exit(129); } static NORETURN void die_builtin(const char *err, va_list params) { - report("fatal: ", err, params); + vreportf("fatal: ", err, params); exit(128); } static void error_builtin(const char *err, va_list params) { - report("error: ", err, params); + vreportf("error: ", err, params); } static void warn_builtin(const char *warn, va_list params) { - report("warning: ", warn, params); + vreportf("warning: ", warn, params); } /* If we are in a dlopen()ed .so write to a global variable would segfault diff --git a/userdiff.c b/userdiff.c index 67003fbb23..c49cc1b67e 100644 --- a/userdiff.c +++ b/userdiff.c @@ -45,7 +45,9 @@ PATTERNS("pascal", "|[-+0-9.e]+|0[xXbB]?[0-9a-fA-F]+" "|<>|<=|>=|:=|\\.\\." "|[^[:space:]]|[\x80-\xff]+"), -PATTERNS("php", "^[\t ]*((function|class).*)", +PATTERNS("php", + "^[\t ]*(((public|protected|private|static)[\t ]+)*function.*)$\n" + "^[\t ]*(class.*)$", /* -- */ "[a-zA-Z_][a-zA-Z0-9_]*" "|[-+0-9.e]+|0[xXbB]?[0-9a-fA-F]+" @@ -10,9 +10,11 @@ static void try_to_free_builtin(size_t size) static void (*try_to_free_routine)(size_t size) = try_to_free_builtin; -void set_try_to_free_routine(void (*routine)(size_t)) +try_to_free_t set_try_to_free_routine(try_to_free_t routine) { - try_to_free_routine = (routine) ? routine : try_to_free_builtin; + try_to_free_t old = try_to_free_routine; + try_to_free_routine = routine; + return old; } char *xstrdup(const char *str) diff --git a/wt-status.c b/wt-status.c index 14e0acce8c..2f9e33c8fa 100644 --- a/wt-status.c +++ b/wt-status.c @@ -9,6 +9,8 @@ #include "quote.h" #include "run-command.h" #include "remote.h" +#include "refs.h" +#include "submodule.h" static char default_wt_status_colors[][COLOR_MAXLEN] = { GIT_COLOR_NORMAL, /* WT_STATUS_HEADER */ @@ -17,6 +19,8 @@ static char default_wt_status_colors[][COLOR_MAXLEN] = { GIT_COLOR_RED, /* WT_STATUS_UNTRACKED */ GIT_COLOR_RED, /* WT_STATUS_NOBRANCH */ GIT_COLOR_RED, /* WT_STATUS_UNMERGED */ + GIT_COLOR_GREEN, /* WT_STATUS_LOCAL_BRANCH */ + GIT_COLOR_RED, /* WT_STATUS_REMOTE_BRANCH */ }; static const char *color(int slot, struct wt_status *s) @@ -232,7 +236,7 @@ static void wt_status_collect_changed_cb(struct diff_queue_struct *q, struct wt_status_change_data *d; p = q->queue[i]; - it = string_list_insert(p->one->path, &s->change); + it = string_list_insert(&s->change, p->one->path); d = it->util; if (!d) { d = xcalloc(1, sizeof(*d)); @@ -279,7 +283,7 @@ static void wt_status_collect_updated_cb(struct diff_queue_struct *q, struct wt_status_change_data *d; p = q->queue[i]; - it = string_list_insert(p->two->path, &s->change); + it = string_list_insert(&s->change, p->two->path); d = it->util; if (!d) { d = xcalloc(1, sizeof(*d)); @@ -309,6 +313,8 @@ static void wt_status_collect_changes_worktree(struct wt_status *s) DIFF_OPT_SET(&rev.diffopt, DIRTY_SUBMODULES); if (!s->show_untracked_files) DIFF_OPT_SET(&rev.diffopt, IGNORE_UNTRACKED_IN_SUBMODULES); + if (s->ignore_submodule_arg) + handle_ignore_submodules_arg(&rev.diffopt, s->ignore_submodule_arg); rev.diffopt.format_callback = wt_status_collect_changed_cb; rev.diffopt.format_callback_data = s; rev.prune_data = s->pathspec; @@ -325,6 +331,9 @@ static void wt_status_collect_changes_index(struct wt_status *s) opt.def = s->is_initial ? EMPTY_TREE_SHA1_HEX : s->reference; setup_revisions(0, NULL, &rev, &opt); + if (s->ignore_submodule_arg) + handle_ignore_submodules_arg(&rev.diffopt, s->ignore_submodule_arg); + rev.diffopt.output_format |= DIFF_FORMAT_CALLBACK; rev.diffopt.format_callback = wt_status_collect_updated_cb; rev.diffopt.format_callback_data = s; @@ -346,7 +355,7 @@ static void wt_status_collect_changes_initial(struct wt_status *s) if (!ce_path_match(ce, s->pathspec)) continue; - it = string_list_insert(ce->name, &s->change); + it = string_list_insert(&s->change, ce->name); d = it->util; if (!d) { d = xcalloc(1, sizeof(*d)); @@ -381,7 +390,7 @@ static void wt_status_collect_untracked(struct wt_status *s) continue; if (!match_pathspec(s->pathspec, ent->name, ent->len, 0, NULL)) continue; - string_list_insert(ent->name, &s->untracked); + string_list_insert(&s->untracked, ent->name); free(ent); } @@ -395,7 +404,7 @@ static void wt_status_collect_untracked(struct wt_status *s) continue; if (!match_pathspec(s->pathspec, ent->name, ent->len, 0, NULL)) continue; - string_list_insert(ent->name, &s->ignored); + string_list_insert(&s->ignored, ent->name); free(ent); } } @@ -518,17 +527,18 @@ static void wt_status_print_submodule_summary(struct wt_status *s, int uncommitt struct child_process sm_summary; char summary_limit[64]; char index[PATH_MAX]; - const char *env[] = { index, NULL }; - const char *argv[] = { - "submodule", - "summary", - uncommitted ? "--files" : "--cached", - "--for-status", - "--summary-limit", - summary_limit, - uncommitted ? NULL : (s->amend ? "HEAD^" : "HEAD"), - NULL - }; + const char *env[] = { NULL, NULL }; + const char *argv[8]; + + env[0] = index; + argv[0] = "submodule"; + argv[1] = "summary"; + argv[2] = uncommitted ? "--files" : "--cached"; + argv[3] = "--for-status"; + argv[4] = "--summary-limit"; + argv[5] = summary_limit; + argv[6] = uncommitted ? NULL : (s->amend ? "HEAD^" : "HEAD"); + argv[7] = NULL; sprintf(summary_limit, "%d", s->submodule_summary); snprintf(index, sizeof(index), "GIT_INDEX_FILE=%s", s->index_file); @@ -642,7 +652,9 @@ void wt_status_print(struct wt_status *s) wt_status_print_updated(s); wt_status_print_unmerged(s); wt_status_print_changed(s); - if (s->submodule_summary) { + if (s->submodule_summary && + (!s->ignore_submodule_arg || + strcmp(s->ignore_submodule_arg, "all"))) { wt_status_print_submodule_summary(s, 0); /* staged */ wt_status_print_submodule_summary(s, 1); /* unstaged */ } @@ -756,9 +768,69 @@ static void wt_shortstatus_other(int null_termination, struct string_list_item * } } -void wt_shortstatus_print(struct wt_status *s, int null_termination) +static void wt_shortstatus_print_tracking(struct wt_status *s) +{ + struct branch *branch; + const char *header_color = color(WT_STATUS_HEADER, s); + const char *branch_color_local = color(WT_STATUS_LOCAL_BRANCH, s); + const char *branch_color_remote = color(WT_STATUS_REMOTE_BRANCH, s); + + const char *base; + const char *branch_name; + int num_ours, num_theirs; + + color_fprintf(s->fp, color(WT_STATUS_HEADER, s), "## "); + + if (!s->branch) + return; + branch_name = s->branch; + + if (!prefixcmp(branch_name, "refs/heads/")) + branch_name += 11; + else if (!strcmp(branch_name, "HEAD")) { + branch_name = "HEAD (no branch)"; + branch_color_local = color(WT_STATUS_NOBRANCH, s); + } + + branch = branch_get(s->branch + 11); + if (s->is_initial) + color_fprintf(s->fp, header_color, "Initial commit on "); + if (!stat_tracking_info(branch, &num_ours, &num_theirs)) { + color_fprintf_ln(s->fp, branch_color_local, + "%s", branch_name); + return; + } + + base = branch->merge[0]->dst; + base = shorten_unambiguous_ref(base, 0); + color_fprintf(s->fp, branch_color_local, "%s", branch_name); + color_fprintf(s->fp, header_color, "..."); + color_fprintf(s->fp, branch_color_remote, "%s", base); + + color_fprintf(s->fp, header_color, " ["); + if (!num_ours) { + color_fprintf(s->fp, header_color, "behind "); + color_fprintf(s->fp, branch_color_remote, "%d", num_theirs); + } else if (!num_theirs) { + color_fprintf(s->fp, header_color, "ahead "); + color_fprintf(s->fp, branch_color_local, "%d", num_ours); + } else { + color_fprintf(s->fp, header_color, "ahead "); + color_fprintf(s->fp, branch_color_local, "%d", num_ours); + color_fprintf(s->fp, header_color, ", behind "); + color_fprintf(s->fp, branch_color_remote, "%d", num_theirs); + } + + color_fprintf_ln(s->fp, header_color, "]"); +} + +void wt_shortstatus_print(struct wt_status *s, int null_termination, int show_branch) { int i; + + if (show_branch) + wt_shortstatus_print_tracking(s); + for (i = 0; i < s->change.nr; i++) { struct wt_status_change_data *d; struct string_list_item *it; @@ -789,5 +861,5 @@ void wt_porcelain_print(struct wt_status *s, int null_termination) s->use_color = 0; s->relative_paths = 0; s->prefix = NULL; - wt_shortstatus_print(s, null_termination); + wt_shortstatus_print(s, null_termination, 0); } diff --git a/wt-status.h b/wt-status.h index 1093e65ae0..9df9c9fad2 100644 --- a/wt-status.h +++ b/wt-status.h @@ -12,6 +12,8 @@ enum color_wt_status { WT_STATUS_UNTRACKED, WT_STATUS_NOBRANCH, WT_STATUS_UNMERGED, + WT_STATUS_LOCAL_BRANCH, + WT_STATUS_REMOTE_BRANCH }; enum untracked_status_type { @@ -43,7 +45,8 @@ struct wt_status { int submodule_summary; int show_ignored_files; enum untracked_status_type show_untracked_files; - char color_palette[WT_STATUS_UNMERGED+1][COLOR_MAXLEN]; + const char *ignore_submodule_arg; + char color_palette[WT_STATUS_REMOTE_BRANCH+1][COLOR_MAXLEN]; /* These are computed during processing of the individual sections */ int commitable; @@ -60,7 +63,7 @@ void wt_status_prepare(struct wt_status *s); void wt_status_print(struct wt_status *s); void wt_status_collect(struct wt_status *s); -void wt_shortstatus_print(struct wt_status *s, int null_termination); +void wt_shortstatus_print(struct wt_status *s, int null_termination, int show_branch); void wt_porcelain_print(struct wt_status *s, int null_termination); #endif /* STATUS_H */ |
