diff options
| author |  Junio C Hamano <gitster@pobox.com> | 2008-02-01 01:50:53 -0800 |
|---|---|---|
| committer | Junio C Hamano <gitster@pobox.com> | 2008-02-01 20:49:34 -0800 |
| commit | 41ac414ea2bef81af94474cbef25a38868b4788e (patch) | |
| tree | e9c598e65753ab473eefc6fcc5899714d8085a2f /t | |
| parent | Update stale documentation links from the main documentation. (diff) | |
| download | tgif-41ac414ea2bef81af94474cbef25a38868b4788e.tar.xz | |
Sane use of test_expect_failure
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Diffstat (limited to 't')
48 files changed, 498 insertions, 427 deletions
@@ -160,14 +160,12 @@ library for your script to use. - test_expect_failure <message> <script> - This is the opposite of test_expect_success. If <script> - yields success, test is considered a failure. - - Example: - - test_expect_failure \ - 'git-update-index without --add should fail adding.' \ - 'git-update-index should-be-empty' + This is NOT the opposite of test_expect_success, but is used + to mark a test that demonstrates a known breakage. Unlike + the usual test_expect_success tests, which say "ok" on + success and "FAIL" on failure, this will say "FIXED" on + success and "still broken" on failure. Failures from these + tests won't cause -i (immediate) to stop. - test_debug <script> diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index 4e49d59065..cd0de506d2 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -47,12 +47,24 @@ test_expect_success \ 'test $(wc -l < full-of-directories) = 3' ################################################################ +# Test harness +test_expect_success 'success is reported like this' ' + : +' +test_expect_failure 'pretend we have a known breakage' ' + false +' +test_expect_failure 'pretend we have fixed a known breakage' ' + : +' + +################################################################ # Basics of the basics # updating a new file without --add should fail. -test_expect_failure \ - 'git update-index without --add should fail adding.' \ - 'git update-index should-be-empty' +test_expect_success 'git update-index without --add should fail adding.' ' + ! git update-index should-be-empty +' # and with --add it should succeed, even if it is empty (it used to fail). test_expect_success \ @@ -70,9 +82,9 @@ test_expect_success \ # Removing paths. rm -f should-be-empty full-of-directories -test_expect_failure \ - 'git update-index without --remove should fail removing.' \ - 'git update-index should-be-empty' +test_expect_success 'git update-index without --remove should fail removing.' ' + ! git update-index should-be-empty +' test_expect_success \ 'git update-index with --remove should be able to remove.' \ @@ -204,9 +216,9 @@ test_expect_success \ 'put invalid objects into the index.' \ 'git update-index --index-info < badobjects' -test_expect_failure \ - 'writing this tree without --missing-ok.' \ - 'git write-tree' +test_expect_success 'writing this tree without --missing-ok.' ' + ! git write-tree +' test_expect_success \ 'writing this tree with --missing-ok.' \ diff --git a/t/t0030-stripspace.sh b/t/t0030-stripspace.sh index cad95f35ad..818c8621f2 100755 --- a/t/t0030-stripspace.sh +++ b/t/t0030-stripspace.sh @@ -243,14 +243,14 @@ test_expect_success \ test `printf "$ttt$sss$sss$sss" | git stripspace | wc -l` -gt 0 ' -test_expect_failure \ +test_expect_success \ 'text plus spaces without newline at end should not show spaces' ' - printf "$ttt$sss" | git stripspace | grep -q " " || - printf "$ttt$ttt$sss" | git stripspace | grep -q " " || - printf "$ttt$ttt$ttt$sss" | git stripspace | grep -q " " || - printf "$ttt$sss$sss" | git stripspace | grep -q " " || - printf "$ttt$ttt$sss$sss" | git stripspace | grep -q " " || - printf "$ttt$sss$sss$sss" | git stripspace | grep -q " " + ! (printf "$ttt$sss" | git stripspace | grep -q " ") && + ! (printf "$ttt$ttt$sss" | git stripspace | grep -q " ") && + ! (printf "$ttt$ttt$ttt$sss" | git stripspace | grep -q " ") && + ! (printf "$ttt$sss$sss" | git stripspace | grep -q " ") && + ! (printf "$ttt$ttt$sss$sss" | git stripspace | grep -q " ") && + ! (printf "$ttt$sss$sss$sss" | git stripspace | grep -q " ") ' test_expect_success \ @@ -280,14 +280,14 @@ test_expect_success \ git diff expect actual ' -test_expect_failure \ +test_expect_success \ 'text plus spaces at end should not show spaces' ' - echo "$ttt$sss" | git stripspace | grep -q " " || - echo "$ttt$ttt$sss" | git stripspace | grep -q " " || - echo "$ttt$ttt$ttt$sss" | git stripspace | grep -q " " || - echo "$ttt$sss$sss" | git stripspace | grep -q " " || - echo "$ttt$ttt$sss$sss" | git stripspace | grep -q " " || - echo "$ttt$sss$sss$sss" | git stripspace | grep -q " " + ! (echo "$ttt$sss" | git stripspace | grep -q " ") && + ! (echo "$ttt$ttt$sss" | git stripspace | grep -q " ") && + ! (echo "$ttt$ttt$ttt$sss" | git stripspace | grep -q " ") && + ! (echo "$ttt$sss$sss" | git stripspace | grep -q " ") && + ! (echo "$ttt$ttt$sss$sss" | git stripspace | grep -q " ") && + ! (echo "$ttt$sss$sss$sss" | git stripspace | grep -q " ") ' test_expect_success \ @@ -339,13 +339,13 @@ test_expect_success \ git diff expect actual ' -test_expect_failure \ +test_expect_success \ 'spaces without newline at end should not show spaces' ' - printf "" | git stripspace | grep -q " " || - printf "$sss" | git stripspace | grep -q " " || - printf "$sss$sss" | git stripspace | grep -q " " || - printf "$sss$sss$sss" | git stripspace | grep -q " " || - printf "$sss$sss$sss$sss" | git stripspace | grep -q " " + ! (printf "" | git stripspace | grep -q " ") && + ! (printf "$sss" | git stripspace | grep -q " ") && + ! (printf "$sss$sss" | git stripspace | grep -q " ") && + ! (printf "$sss$sss$sss" | git stripspace | grep -q " ") && + ! (printf "$sss$sss$sss$sss" | git stripspace | grep -q " ") ' test_expect_success \ diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index 0a3b55d121..0e2933a984 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -87,9 +87,9 @@ test_expect_success 'unambiguously abbreviated option with "="' ' git diff expect output ' -test_expect_failure 'ambiguously abbreviated option' ' +test_expect_success 'ambiguously abbreviated option' ' test-parse-options --strin 123; - test $? != 129 + test $? = 129 ' cat > expect << EOF diff --git a/t/t1000-read-tree-m-3way.sh b/t/t1000-read-tree-m-3way.sh index 37add1b504..6c065bfa21 100755 --- a/t/t1000-read-tree-m-3way.sh +++ b/t/t1000-read-tree-m-3way.sh @@ -210,12 +210,12 @@ DF (file) when tree B require DF to be a directory by having DF/DF END_OF_CASE_TABLE -test_expect_failure \ - '1 - must not have an entry not in A.' \ - "rm -f .git/index XX && +test_expect_success '1 - must not have an entry not in A.' " + rm -f .git/index XX && echo XX >XX && git update-index --add XX && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" test_expect_success \ '2 - must match B in !O && !A && B case.' \ @@ -248,13 +248,14 @@ test_expect_success \ echo extra >>AN && git read-tree -m $tree_O $tree_A $tree_B" -test_expect_failure \ - '3 (fail) - must match A in !O && A && !B case.' \ - "rm -f .git/index AN && +test_expect_success \ + '3 (fail) - must match A in !O && A && !B case.' " + rm -f .git/index AN && cp .orig-A/AN AN && echo extra >>AN && git update-index --add AN && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" test_expect_success \ '4 - must match and be up-to-date in !O && A && B && A!=B case.' \ @@ -264,21 +265,23 @@ test_expect_success \ git read-tree -m $tree_O $tree_A $tree_B && check_result" -test_expect_failure \ - '4 (fail) - must match and be up-to-date in !O && A && B && A!=B case.' \ - "rm -f .git/index AA && +test_expect_success \ + '4 (fail) - must match and be up-to-date in !O && A && B && A!=B case.' " + rm -f .git/index AA && cp .orig-A/AA AA && git update-index --add AA && echo extra >>AA && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" -test_expect_failure \ - '4 (fail) - must match and be up-to-date in !O && A && B && A!=B case.' \ - "rm -f .git/index AA && +test_expect_success \ + '4 (fail) - must match and be up-to-date in !O && A && B && A!=B case.' " + rm -f .git/index AA && cp .orig-A/AA AA && echo extra >>AA && git update-index --add AA && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" test_expect_success \ '5 - must match in !O && A && B && A==B case.' \ @@ -297,34 +300,38 @@ test_expect_success \ git read-tree -m $tree_O $tree_A $tree_B && check_result" -test_expect_failure \ - '5 (fail) - must match A in !O && A && B && A==B case.' \ - "rm -f .git/index LL && +test_expect_success \ + '5 (fail) - must match A in !O && A && B && A==B case.' " + rm -f .git/index LL && cp .orig-A/LL LL && echo extra >>LL && git update-index --add LL && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" -test_expect_failure \ - '6 - must not exist in O && !A && !B case' \ - "rm -f .git/index DD && +test_expect_success \ + '6 - must not exist in O && !A && !B case' " + rm -f .git/index DD && echo DD >DD git update-index --add DD && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" -test_expect_failure \ - '7 - must not exist in O && !A && B && O!=B case' \ - "rm -f .git/index DM && +test_expect_success \ + '7 - must not exist in O && !A && B && O!=B case' " + rm -f .git/index DM && cp .orig-B/DM DM && git update-index --add DM && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" -test_expect_failure \ - '8 - must not exist in O && !A && B && O==B case' \ - "rm -f .git/index DN && +test_expect_success \ + '8 - must not exist in O && !A && B && O==B case' " + rm -f .git/index DN && cp .orig-B/DN DN && git update-index --add DN && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" test_expect_success \ '9 - must match and be up-to-date in O && A && !B && O!=A case' \ @@ -334,21 +341,23 @@ test_expect_success \ git read-tree -m $tree_O $tree_A $tree_B && check_result" -test_expect_failure \ - '9 (fail) - must match and be up-to-date in O && A && !B && O!=A case' \ - "rm -f .git/index MD && +test_expect_success \ + '9 (fail) - must match and be up-to-date in O && A && !B && O!=A case' " + rm -f .git/index MD && cp .orig-A/MD MD && git update-index --add MD && echo extra >>MD && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" -test_expect_failure \ - '9 (fail) - must match and be up-to-date in O && A && !B && O!=A case' \ - "rm -f .git/index MD && +test_expect_success \ + '9 (fail) - must match and be up-to-date in O && A && !B && O!=A case' " + rm -f .git/index MD && cp .orig-A/MD MD && echo extra >>MD && git update-index --add MD && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" test_expect_success \ '10 - must match and be up-to-date in O && A && !B && O==A case' \ @@ -358,21 +367,23 @@ test_expect_success \ git read-tree -m $tree_O $tree_A $tree_B && check_result" -test_expect_failure \ - '10 (fail) - must match and be up-to-date in O && A && !B && O==A case' \ - "rm -f .git/index ND && +test_expect_success \ + '10 (fail) - must match and be up-to-date in O && A && !B && O==A case' " + rm -f .git/index ND && cp .orig-A/ND ND && git update-index --add ND && echo extra >>ND && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" -test_expect_failure \ - '10 (fail) - must match and be up-to-date in O && A && !B && O==A case' \ - "rm -f .git/index ND && +test_expect_success \ + '10 (fail) - must match and be up-to-date in O && A && !B && O==A case' " + rm -f .git/index ND && cp .orig-A/ND ND && echo extra >>ND && git update-index --add ND && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" test_expect_success \ '11 - must match and be up-to-date in O && A && B && O!=A && O!=B && A!=B case' \ @@ -382,21 +393,23 @@ test_expect_success \ git read-tree -m $tree_O $tree_A $tree_B && check_result" -test_expect_failure \ - '11 (fail) - must match and be up-to-date in O && A && B && O!=A && O!=B && A!=B case' \ - "rm -f .git/index MM && +test_expect_success \ + '11 (fail) - must match and be up-to-date in O && A && B && O!=A && O!=B && A!=B case' " + rm -f .git/index MM && cp .orig-A/MM MM && git update-index --add MM && echo extra >>MM && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" -test_expect_failure \ - '11 (fail) - must match and be up-to-date in O && A && B && O!=A && O!=B && A!=B case' \ - "rm -f .git/index MM && +test_expect_success \ + '11 (fail) - must match and be up-to-date in O && A && B && O!=A && O!=B && A!=B case' " + rm -f .git/index MM && cp .orig-A/MM MM && echo extra >>MM && git update-index --add MM && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" test_expect_success \ '12 - must match A in O && A && B && O!=A && A==B case' \ @@ -415,13 +428,14 @@ test_expect_success \ git read-tree -m $tree_O $tree_A $tree_B && check_result" -test_expect_failure \ - '12 (fail) - must match A in O && A && B && O!=A && A==B case' \ - "rm -f .git/index SS && +test_expect_success \ + '12 (fail) - must match A in O && A && B && O!=A && A==B case' " + rm -f .git/index SS && cp .orig-A/SS SS && echo extra >>SS && git update-index --add SS && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" test_expect_success \ '13 - must match A in O && A && B && O!=A && O==B case' \ @@ -457,21 +471,23 @@ test_expect_success \ git read-tree -m $tree_O $tree_A $tree_B && check_result" -test_expect_failure \ - '14 (fail) - must match and be up-to-date in O && A && B && O==A && O!=B case' \ - "rm -f .git/index NM && +test_expect_success \ + '14 (fail) - must match and be up-to-date in O && A && B && O==A && O!=B case' " + rm -f .git/index NM && cp .orig-A/NM NM && git update-index --add NM && echo extra >>NM && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" -test_expect_failure \ - '14 (fail) - must match and be up-to-date in O && A && B && O==A && O!=B case' \ - "rm -f .git/index NM && +test_expect_success \ + '14 (fail) - must match and be up-to-date in O && A && B && O==A && O!=B case' " + rm -f .git/index NM && cp .orig-A/NM NM && echo extra >>NM && git update-index --add NM && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" test_expect_success \ '15 - must match A in O && A && B && O==A && O==B case' \ @@ -490,13 +506,14 @@ test_expect_success \ git read-tree -m $tree_O $tree_A $tree_B && check_result" -test_expect_failure \ - '15 (fail) - must match A in O && A && B && O==A && O==B case' \ - "rm -f .git/index NN && +test_expect_success \ + '15 (fail) - must match A in O && A && B && O==A && O==B case' " + rm -f .git/index NN && cp .orig-A/NN NN && echo extra >>NN && git update-index --add NN && - git read-tree -m $tree_O $tree_A $tree_B" + ! git read-tree -m $tree_O $tree_A $tree_B +" # #16 test_expect_success \ diff --git a/t/t1200-tutorial.sh b/t/t1200-tutorial.sh index 991d3c5e9c..dcb3108c29 100755 --- a/t/t1200-tutorial.sh +++ b/t/t1200-tutorial.sh @@ -101,8 +101,8 @@ echo "Play, play, play" >>hello echo "Lots of fun" >>example git commit -m 'Some fun.' -i hello example -test_expect_failure 'git resolve now fails' ' - git merge -m "Merge work in mybranch" mybranch +test_expect_success 'git resolve now fails' ' + ! git merge -m "Merge work in mybranch" mybranch ' cat > hello << EOF @@ -156,6 +156,8 @@ test_expect_success 'git show-branch' 'cmp show-branch2.expect show-branch2.outp test_expect_success 'git repack' 'git repack' test_expect_success 'git prune-packed' 'git prune-packed' -test_expect_failure '-> only packed objects' 'find -type f .git/objects/[0-9a-f][0-9a-f]' +test_expect_success '-> only packed objects' ' + ! find -type f .git/objects/[0-9a-f][0-9a-f] +' test_done diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh index 42eac2a7cb..a786c5c970 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-repo-config.sh @@ -181,8 +181,9 @@ test_expect_success 'non-match' \ test_expect_success 'non-match value' \ 'test wow = $(git config --get nextsection.nonewline !for)' -test_expect_failure 'ambiguous get' \ - 'git config --get nextsection.nonewline' +test_expect_success 'ambiguous get' ' + ! git config --get nextsection.nonewline +' test_expect_success 'get multivar' \ 'git config --get-all nextsection.nonewline' @@ -202,13 +203,17 @@ EOF test_expect_success 'multivar replace' 'cmp .git/config expect' -test_expect_failure 'ambiguous value' 'git config nextsection.nonewline' +test_expect_success 'ambiguous value' ' + ! git config nextsection.nonewline +' -test_expect_failure 'ambiguous unset' \ - 'git config --unset nextsection.nonewline' +test_expect_success 'ambiguous unset' ' + ! git config --unset nextsection.nonewline +' -test_expect_failure 'invalid unset' \ - 'git config --unset somesection.nonewline' +test_expect_success 'invalid unset' ' + ! git config --unset somesection.nonewline +' git config --unset nextsection.nonewline "wow3$" @@ -224,7 +229,7 @@ EOF test_expect_success 'multivar unset' 'cmp .git/config expect' -test_expect_failure 'invalid key' 'git config inval.2key blabla' +test_expect_success 'invalid key' '! git config inval.2key blabla' test_expect_success 'correct key' 'git config 123456.a123 987' @@ -382,8 +387,9 @@ EOF test_expect_success "rename succeeded" "git diff expect .git/config" -test_expect_failure "rename non-existing section" \ - 'git config --rename-section branch."world domination" branch.drei' +test_expect_success "rename non-existing section" ' + ! git config --rename-section branch."world domination" branch.drei +' test_expect_success "rename succeeded" "git diff expect .git/config" @@ -494,14 +500,14 @@ test_expect_success bool ' done && cmp expect result' -test_expect_failure 'invalid bool (--get)' ' +test_expect_success 'invalid bool (--get)' ' git config bool.nobool foobar && - git config --bool --get bool.nobool' + ! git config --bool --get bool.nobool' -test_expect_failure 'invalid bool (set)' ' +test_expect_success 'invalid bool (set)' ' - git config --bool bool.nobool foobar' + ! git config --bool bool.nobool foobar' rm .git/config @@ -562,8 +568,9 @@ EOF test_expect_success 'quoting' 'cmp .git/config expect' -test_expect_failure 'key with newline' 'git config key.with\\\ -newline 123' +test_expect_success 'key with newline' ' + ! git config "key.with +newline" 123' test_expect_success 'value with newline' 'git config key.sub value.with\\\ newline' diff --git a/t/t1302-repo-version.sh b/t/t1302-repo-version.sh index 37fc1c8d36..9be0770e76 100755 --- a/t/t1302-repo-version.sh +++ b/t/t1302-repo-version.sh @@ -40,7 +40,8 @@ test_expect_success 'gitdir required mode on normal repos' ' (git apply --check --index test.patch && cd test && git apply --check --index ../test.patch)' -test_expect_failure 'gitdir required mode on unsupported repo' ' - (cd test2 && git apply --check --index ../test.patch)' +test_expect_success 'gitdir required mode on unsupported repo' ' + (cd test2 && ! git apply --check --index ../test.patch) +' test_done diff --git a/t/t1400-update-ref.sh b/t/t1400-update-ref.sh index 71ab2dd0ee..78cd41245b 100755 --- a/t/t1400-update-ref.sh +++ b/t/t1400-update-ref.sh @@ -51,23 +51,23 @@ test_expect_success \ test $B"' = $(cat .git/'"$m"')' rm -f .git/$m -test_expect_failure \ - '(not) create HEAD with old sha1' \ - "git update-ref HEAD $A $B" -test_expect_failure \ - "(not) prior created .git/$m" \ - "test -f .git/$m" +test_expect_success '(not) create HEAD with old sha1' " + ! git update-ref HEAD $A $B +" +test_expect_success "(not) prior created .git/$m" " + ! test -f .git/$m +" rm -f .git/$m test_expect_success \ "create HEAD" \ "git update-ref HEAD $A" -test_expect_failure \ - '(not) change HEAD with wrong SHA1' \ - "git update-ref HEAD $B $Z" -test_expect_failure \ - "(not) changed .git/$m" \ - "test $B"' = $(cat .git/'"$m"')' +test_expect_success '(not) change HEAD with wrong SHA1' " + ! git update-ref HEAD $B $Z +" +test_expect_success "(not) changed .git/$m" " + ! test $B"' = $(cat .git/'"$m"') +' rm -f .git/$m : a repository with working tree always has reflog these days... diff --git a/t/t2000-checkout-cache-clash.sh b/t/t2000-checkout-cache-clash.sh index ac84335b0a..5141fab7cf 100755 --- a/t/t2000-checkout-cache-clash.sh +++ b/t/t2000-checkout-cache-clash.sh @@ -36,9 +36,9 @@ mkdir path0 date >path0/file0 date >path1 -test_expect_failure \ +test_expect_success \ 'git checkout-index without -f should fail on conflicting work tree.' \ - 'git checkout-index -a' + '! git checkout-index -a' test_expect_success \ 'git checkout-index with -f should succeed.' \ diff --git a/t/t2002-checkout-cache-u.sh b/t/t2002-checkout-cache-u.sh index f7a0055920..0f441bcef7 100755 --- a/t/t2002-checkout-cache-u.sh +++ b/t/t2002-checkout-cache-u.sh @@ -16,12 +16,12 @@ echo frotz >path0 && git update-index --add path0 && t=$(git write-tree)' -test_expect_failure \ +test_expect_success \ 'without -u, git checkout-index smudges stat information.' ' rm -f path0 && git read-tree $t && git checkout-index -f -a && -git diff-files | diff - /dev/null' +! git diff-files | diff - /dev/null' test_expect_success \ 'with -u, git checkout-index picks up stat information from new files.' ' diff --git a/t/t2008-checkout-subdir.sh b/t/t2008-checkout-subdir.sh index f78945ed8e..4a723dc0e5 100755 --- a/t/t2008-checkout-subdir.sh +++ b/t/t2008-checkout-subdir.sh @@ -67,16 +67,16 @@ test_expect_success 'checkout with simple prefix' ' ' -test_expect_failure 'relative path outside tree should fail' \ - 'git checkout HEAD -- ../../Makefile' +test_expect_success 'relative path outside tree should fail' \ + '! git checkout HEAD -- ../../Makefile' -test_expect_failure 'incorrect relative path to file should fail (1)' \ - 'git checkout HEAD -- ../file0' +test_expect_success 'incorrect relative path to file should fail (1)' \ + '! git checkout HEAD -- ../file0' -test_expect_failure 'incorrect relative path should fail (2)' \ - '( cd dir1 && git checkout HEAD -- ./file0 )' +test_expect_success 'incorrect relative path should fail (2)' \ + '( cd dir1 && ! git checkout HEAD -- ./file0 )' -test_expect_failure 'incorrect relative path should fail (3)' \ - '( cd dir1 && git checkout HEAD -- ../../file0 )' +test_expect_success 'incorrect relative path should fail (3)' \ + '( cd dir1 && ! git checkout HEAD -- ../../file0 )' test_done diff --git a/t/t2100-update-cache-badpath.sh b/t/t2100-update-cache-badpath.sh index 04a1ed1a6b..9beaecd18b 100755 --- a/t/t2100-update-cache-badpath.sh +++ b/t/t2100-update-cache-badpath.sh @@ -44,8 +44,8 @@ date >path1/file1 for p in path0/file0 path1/file1 path2 path3 do - test_expect_failure \ + test_expect_success \ "git update-index to add conflicting path $p should fail." \ - "git update-index --add -- $p" + "! git update-index --add -- $p" done test_done diff --git a/t/t3020-ls-files-error-unmatch.sh b/t/t3020-ls-files-error-unmatch.sh index c83f820ad2..f4da869932 100755 --- a/t/t3020-ls-files-error-unmatch.sh +++ b/t/t3020-ls-files-error-unmatch.sh @@ -15,9 +15,9 @@ touch foo bar git update-index --add foo bar git-commit -m "add foo bar" -test_expect_failure \ +test_expect_success \ 'git ls-files --error-unmatch should fail with unmatched path.' \ - 'git ls-files --error-unmatch foo bar-does-not-match' + '! git ls-files --error-unmatch foo bar-does-not-match' test_expect_success \ 'git ls-files --error-unmatch should succeed eith matched paths.' \ diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index ef1eeb7d8a..d21081d0f1 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -17,10 +17,11 @@ test_expect_success \ git-commit -m "Initial commit." && HEAD=$(git rev-parse --verify HEAD)' -test_expect_failure \ - 'git branch --help should not have created a bogus branch' \ - 'git branch --help </dev/null >/dev/null 2>/dev/null || : - test -f .git/refs/heads/--help' +test_expect_success \ + 'git branch --help should not have created a bogus branch' ' + git branch --help </dev/null >/dev/null 2>/dev/null; + ! test -f .git/refs/heads/--help +' test_expect_success \ 'git branch abc should create a branch' \ @@ -71,17 +72,17 @@ test_expect_success \ git branch -m n/n n test -f .git/logs/refs/heads/n' -test_expect_failure \ - 'git branch -m o/o o should fail when o/p exists' \ - 'git branch o/o && +test_expect_success 'git branch -m o/o o should fail when o/p exists' ' + git branch o/o && git branch o/p && - git branch -m o/o o' + ! git branch -m o/o o +' -test_expect_failure \ - 'git branch -m q r/q should fail when r exists' \ - 'git branch q && - git branch r && - git branch -m q r/q' +test_expect_success 'git branch -m q r/q should fail when r exists' ' + git branch q && + git branch r && + ! git branch -m q r/q +' mv .git/config .git/config-saved @@ -108,12 +109,13 @@ test_expect_success 'config information was renamed, too' \ "test $(git config branch.s.dummy) = Hello && ! git config branch.s/s/dummy" -test_expect_failure \ - 'git branch -m u v should fail when the reflog for u is a symlink' \ - 'git branch -l u && +test_expect_success \ + 'git branch -m u v should fail when the reflog for u is a symlink' ' + git branch -l u && mv .git/logs/refs/heads/u real-u && ln -s real-u .git/logs/refs/heads/u && - git branch -m u v' + ! git branch -m u v +' test_expect_success 'test tracking setup via --track' \ 'git config remote.local.url . && diff --git a/t/t3210-pack-refs.sh b/t/t3210-pack-refs.sh index 4ddc6342a9..b64ccfbc5b 100755 --- a/t/t3210-pack-refs.sh +++ b/t/t3210-pack-refs.sh @@ -39,12 +39,12 @@ test_expect_success \ git show-ref b >result && diff expect result' -test_expect_failure \ - 'git branch c/d should barf if branch c exists' \ - 'git branch c && +test_expect_success 'git branch c/d should barf if branch c exists' ' + git branch c && git pack-refs --all && - rm .git/refs/heads/c && - git branch c/d' + rm -f .git/refs/heads/c && + ! git branch c/d +' test_expect_success \ 'see if a branch still exists after git pack-refs --prune' \ @@ -54,11 +54,11 @@ test_expect_success \ git show-ref e >result && diff expect result' -test_expect_failure \ - 'see if git pack-refs --prune remove ref files' \ - 'git branch f && +test_expect_success 'see if git pack-refs --prune remove ref files' ' + git branch f && git pack-refs --all --prune && - ls .git/refs/heads/f' + ! test -f .git/refs/heads/f +' test_expect_success \ 'git branch g should work when git branch g/h has been deleted' \ @@ -69,11 +69,11 @@ test_expect_success \ git pack-refs --all && git branch -d g' -test_expect_failure \ - 'git branch i/j/k should barf if branch i exists' \ - 'git branch i && +test_expect_success 'git branch i/j/k should barf if branch i exists' ' + git branch i && git pack-refs --all --prune && - git branch i/j/k' + ! git branch i/j/k +' test_expect_success \ 'test git branch k after branch k/l/m and k/lm have been deleted' \ diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index 95e33b5210..496f4ec172 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -42,9 +42,9 @@ test_expect_success \ test_expect_success 'rebase against master' ' git rebase master' -test_expect_failure \ +test_expect_success \ 'the rebase operation should not have destroyed author information' \ - 'git log | grep "Author:" | grep "<>"' + '! git log | grep "Author:" | grep "<>"' test_expect_success 'rebase after merge master' ' git reset --hard topic && diff --git a/t/t3403-rebase-skip.sh b/t/t3403-rebase-skip.sh index 657f68104d..0a26099658 100755 --- a/t/t3403-rebase-skip.sh +++ b/t/t3403-rebase-skip.sh @@ -31,8 +31,8 @@ test_expect_success setup ' git branch skip-merge skip-reference ' -test_expect_failure 'rebase with git am -3 (default)' ' - git rebase master +test_expect_success 'rebase with git am -3 (default)' ' + ! git rebase master ' test_expect_success 'rebase --skip with am -3' ' @@ -53,7 +53,7 @@ test_expect_success 'rebase moves back to skip-reference' ' test_expect_success 'checkout skip-merge' 'git checkout -f skip-merge' -test_expect_failure 'rebase with --merge' 'git rebase --merge master' +test_expect_success 'rebase with --merge' '! git rebase --merge master' test_expect_success 'rebase --skip with --merge' ' git rebase --skip diff --git a/t/t3600-rm.sh b/t/t3600-rm.sh index b1ee622ef7..f542f0af41 100755 --- a/t/t3600-rm.sh +++ b/t/t3600-rm.sh @@ -59,15 +59,16 @@ test_expect_success \ echo "other content" > foo git rm --cached foo' -test_expect_failure \ - 'Test that git rm --cached foo fails if the index matches neither the file nor HEAD' \ - 'echo content > foo +test_expect_success \ + 'Test that git rm --cached foo fails if the index matches neither the file nor HEAD' ' + echo content > foo git add foo git commit -m foo echo "other content" > foo git add foo echo "yet another content" > foo - git rm --cached foo' + ! git rm --cached foo +' test_expect_success \ 'Test that git rm --cached -f foo works in case where --cached only did not' \ @@ -106,9 +107,9 @@ embedded'" if test "$test_failed_remove" = y; then chmod a-w . -test_expect_failure \ +test_expect_success \ 'Test that "git rm -f" fails if its rm fails' \ - 'git rm -f baz' + '! git rm -f baz' chmod 775 . else test_expect_success 'skipping removal failure (perhaps running as root?)' : @@ -212,8 +213,8 @@ test_expect_success 'Recursive with -r -f' ' ! test -d frotz ' -test_expect_failure 'Remove nonexistent file returns nonzero exit status' ' - git rm nonexistent +test_expect_success 'Remove nonexistent file returns nonzero exit status' ' + ! git rm nonexistent ' test_done diff --git a/t/t4103-apply-binary.sh b/t/t4103-apply-binary.sh index 74f06ec730..7c25634fc2 100755 --- a/t/t4103-apply-binary.sh +++ b/t/t4103-apply-binary.sh @@ -46,21 +46,25 @@ test_expect_success 'stat binary diff (copy) -- should not fail.' \ 'git-checkout master git apply --stat --summary C.diff' -test_expect_failure 'check binary diff -- should fail.' \ - 'git-checkout master - git apply --check B.diff' - -test_expect_failure 'check binary diff (copy) -- should fail.' \ - 'git-checkout master - git apply --check C.diff' - -test_expect_failure 'check incomplete binary diff with replacement -- should fail.' \ - 'git-checkout master - git apply --check --allow-binary-replacement B.diff' +test_expect_success 'check binary diff -- should fail.' \ + 'git-checkout master && + ! git apply --check B.diff' + +test_expect_success 'check binary diff (copy) -- should fail.' \ + 'git-checkout master && + ! git apply --check C.diff' + +test_expect_success \ + 'check incomplete binary diff with replacement -- should fail.' ' + git-checkout master && + ! git apply --check --allow-binary-replacement B.diff +' -test_expect_failure 'check incomplete binary diff with replacement (copy) -- should fail.' \ - 'git-checkout master - git apply --check --allow-binary-replacement C.diff' +test_expect_success \ + 'check incomplete binary diff with replacement (copy) -- should fail.' ' + git-checkout master && + ! git apply --check --allow-binary-replacement C.diff +' test_expect_success 'check binary diff with replacement.' \ 'git-checkout master @@ -73,42 +77,42 @@ test_expect_success 'check binary diff with replacement (copy).' \ # Now we start applying them. do_reset () { - rm -f file? - git-reset --hard + rm -f file? && + git-reset --hard && git-checkout -f master } -test_expect_failure 'apply binary diff -- should fail.' \ - 'do_reset - git apply B.diff' +test_expect_success 'apply binary diff -- should fail.' \ + 'do_reset && + ! git apply B.diff' -test_expect_failure 'apply binary diff -- should fail.' \ - 'do_reset - git apply --index B.diff' +test_expect_success 'apply binary diff -- should fail.' \ + 'do_reset && + ! git apply --index B.diff' -test_expect_failure 'apply binary diff (copy) -- should fail.' \ - 'do_reset - git apply C.diff' +test_expect_success 'apply binary diff (copy) -- should fail.' \ + 'do_reset && + ! git apply C.diff' -test_expect_failure 'apply binary diff (copy) -- should fail.' \ - 'do_reset - git apply --index C.diff' +test_expect_success 'apply binary diff (copy) -- should fail.' \ + 'do_reset && + ! git apply --index C.diff' test_expect_success 'apply binary diff without replacement.' \ - 'do_reset + 'do_reset && git apply BF.diff' test_expect_success 'apply binary diff without replacement (copy).' \ - 'do_reset + 'do_reset && git apply CF.diff' test_expect_success 'apply binary diff.' \ - 'do_reset + 'do_reset && git apply --allow-binary-replacement --index BF.diff && test -z "$(git diff --name-status binary)"' test_expect_success 'apply binary diff (copy).' \ - 'do_reset + 'do_reset && git apply --allow-binary-replacement --index CF.diff && test -z "$(git diff --name-status binary)"' diff --git a/t/t4113-apply-ending.sh b/t/t4113-apply-ending.sh index 1c6bec044a..d741039882 100755 --- a/t/t4113-apply-ending.sh +++ b/t/t4113-apply-ending.sh @@ -29,8 +29,8 @@ test_expect_success setup \ # test -test_expect_failure 'apply at the end' \ - 'git apply --index test-patch' +test_expect_success 'apply at the end' \ + '! git apply --index test-patch' cat >test-patch <<\EOF diff a/file b/file @@ -47,7 +47,7 @@ b c' git update-index file -test_expect_failure 'apply at the beginning' \ - 'git apply --index test-patch' +test_expect_success 'apply at the beginning' \ + '! git apply --index test-patch' test_done diff --git a/t/t5300-pack-object.sh b/t/t5300-pack-object.sh index 6e594bf1e2..4f350dd4ec 100755 --- a/t/t5300-pack-object.sh +++ b/t/t5300-pack-object.sh @@ -264,8 +264,8 @@ test_expect_success \ cp -f .git/objects/9d/235ed07cd19811a6ceb342de82f190e49c9f68 \ .git/objects/c8/2de19312b6c3695c0c18f70709a6c535682a67' -test_expect_failure \ +test_expect_success \ 'make sure index-pack detects the SHA1 collision' \ - 'git-index-pack -o bad.idx test-3.pack' + '! git-index-pack -o bad.idx test-3.pack' test_done diff --git a/t/t5302-pack-index.sh b/t/t5302-pack-index.sh index 2a2878b572..67b9a7b84a 100755 --- a/t/t5302-pack-index.sh +++ b/t/t5302-pack-index.sh @@ -42,9 +42,9 @@ test_expect_success \ 'both packs should be identical' \ 'cmp "test-1-${pack1}.pack" "test-2-${pack2}.pack"' -test_expect_failure \ +test_expect_success \ 'index v1 and index v2 should be different' \ - 'cmp "test-1-${pack1}.idx" "test-2-${pack2}.idx"' + '! cmp "test-1-${pack1}.idx" "test-2-${pack2}.idx"' test_expect_success \ 'index-pack with index version 1' \ @@ -78,9 +78,9 @@ test_expect_success \ 'git verify-pack -v "test-3-${pack3}.pack"' test "$have_64bits" && -test_expect_failure \ +test_expect_success \ '64-bit offsets: should be different from previous index v2 results' \ - 'cmp "test-2-${pack2}.idx" "test-3-${pack3}.idx"' + '! cmp "test-2-${pack2}.idx" "test-3-${pack3}.idx"' test "$have_64bits" && test_expect_success \ @@ -112,22 +112,22 @@ test_expect_success \ bs=1 count=20 conv=notrunc && git cat-file blob "$delta_sha1" > blob_2 )' -test_expect_failure \ +test_expect_success \ '[index v1] 3) corrupted delta happily returned wrong data' \ - 'cmp blob_1 blob_2' + '! cmp blob_1 blob_2' -test_expect_failure \ +test_expect_success \ '[index v1] 4) confirm that the pack is actually corrupted' \ - 'git fsck --full $commit' + '! git fsck --full $commit' test_expect_success \ '[index v1] 5) pack-objects happily reuses corrupted data' \ 'pack4=$(git pack-objects test-4 <obj-list) && test -f "test-4-${pack1}.pack"' -test_expect_failure \ +test_expect_success \ '[index v1] 6) newly created pack is BAD !' \ - 'git verify-pack -v "test-4-${pack1}.pack"' + '! git verify-pack -v "test-4-${pack1}.pack"' test_expect_success \ '[index v2] 1) stream pack to repository' \ @@ -150,16 +150,16 @@ test_expect_success \ bs=1 count=20 conv=notrunc && git cat-file blob "$delta_sha1" > blob_4 )' -test_expect_failure \ +test_expect_success \ '[index v2] 3) corrupted delta happily returned wrong data' \ - 'cmp blob_3 blob_4' + '! cmp blob_3 blob_4' -test_expect_failure \ +test_expect_success \ '[index v2] 4) confirm that the pack is actually corrupted' \ - 'git fsck --full $commit' + '! git fsck --full $commit' -test_expect_failure \ +test_expect_success \ '[index v2] 5) pack-objects refuses to reuse corrupted data' \ - 'git pack-objects test-5 <obj-list' + '! git pack-objects test-5 <obj-list' test_done diff --git a/t/t5401-update-hooks.sh b/t/t5401-update-hooks.sh index 9734fc542f..9a12024241 100755 --- a/t/t5401-update-hooks.sh +++ b/t/t5401-update-hooks.sh @@ -60,8 +60,8 @@ echo STDERR post-update >&2 EOF chmod u+x victim/.git/hooks/post-update -test_expect_failure push ' - git-send-pack --force ./victim/.git master tofail >send.out 2>send.err +test_expect_success push ' + ! git-send-pack --force ./victim/.git master tofail >send.out 2>send.err ' test_expect_success 'updated as expected' ' @@ -112,8 +112,8 @@ test_expect_success 'all *-receive hook args are empty' ' ! test -s victim/.git/post-receive.args ' -test_expect_failure 'send-pack produced no output' ' - test -s send.out +test_expect_success 'send-pack produced no output' ' + ! test -s send.out ' cat <<EOF >expect diff --git a/t/t5402-post-merge-hook.sh b/t/t5402-post-merge-hook.sh index 1c4b0b32ab..1394047a8d 100755 --- a/t/t5402-post-merge-hook.sh +++ b/t/t5402-post-merge-hook.sh @@ -30,9 +30,9 @@ EOF chmod u+x clone${clone}/.git/hooks/post-merge done -test_expect_failure 'post-merge does not run for up-to-date ' ' +test_expect_success 'post-merge does not run for up-to-date ' ' GIT_DIR=clone1/.git git merge $commit0 && - test -e clone1/.git/post-merge.args + ! test -f clone1/.git/post-merge.args ' test_expect_success 'post-merge runs as expected ' ' diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 7b6798d8b5..788b4a5aae 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -176,7 +176,7 @@ test_expect_success "deepening fetch in shallow repo" \ test_expect_success "clone shallow object count" \ "test \"count: 18\" = \"$(grep count count.shallow)\"" -test_expect_failure "pull in shallow repo with missing merge base" \ - "(cd shallow; git pull --depth 4 .. A)" +test_expect_success "pull in shallow repo with missing merge base" \ + "(cd shallow && ! git pull --depth 4 .. A)" test_done diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index 02882c1e4b..9b948c14e6 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -95,7 +95,7 @@ test_expect_success 'fetch following tags' ' ' -test_expect_failure 'fetch must not resolve short tag name' ' +test_expect_success 'fetch must not resolve short tag name' ' cd "$D" && @@ -103,11 +103,11 @@ test_expect_failure 'fetch must not resolve short tag name' ' cd five && git init && - git fetch .. anno:five + ! git fetch .. anno:five ' -test_expect_failure 'fetch must not resolve short remote name' ' +test_expect_success 'fetch must not resolve short remote name' ' cd "$D" && git-update-ref refs/remotes/six/HEAD HEAD @@ -116,7 +116,7 @@ test_expect_failure 'fetch must not resolve short remote name' ' cd six && git init && - git fetch .. six:six + ! git fetch .. six:six ' @@ -139,10 +139,10 @@ test_expect_success 'create bundle 2' ' git bundle create bundle2 master~2..master ' -test_expect_failure 'unbundle 1' ' +test_expect_success 'unbundle 1' ' cd "$D/bundle" && git checkout -b some-branch && - git fetch "$D/bundle1" master:master + ! git fetch "$D/bundle1" master:master ' test_expect_success 'bundle 1 has only 3 files ' ' diff --git a/t/t5530-upload-pack-error.sh b/t/t5530-upload-pack-error.sh index cc8949e3ef..8b05091069 100755 --- a/t/t5530-upload-pack-error.sh +++ b/t/t5530-upload-pack-error.sh @@ -26,9 +26,8 @@ test_expect_success 'setup and corrupt repository' ' ' -test_expect_failure 'fsck fails' ' - - git fsck +test_expect_success 'fsck fails' ' + ! git fsck ' test_expect_success 'upload-pack fails due to error in pack-objects' ' @@ -46,9 +45,8 @@ test_expect_success 'corrupt repo differently' ' ' -test_expect_failure 'fsck fails' ' - - git fsck +test_expect_success 'fsck fails' ' + ! git fsck ' test_expect_success 'upload-pack fails due to error in rev-list' ' @@ -66,9 +64,9 @@ test_expect_success 'create empty repository' ' ' -test_expect_failure 'fetch fails' ' +test_expect_success 'fetch fails' ' - git fetch .. master + ! git fetch .. master ' diff --git a/t/t5600-clone-fail-cleanup.sh b/t/t5600-clone-fail-cleanup.sh index 1776b377f3..acf34cec8f 100755 --- a/t/t5600-clone-fail-cleanup.sh +++ b/t/t5600-clone-fail-cleanup.sh @@ -11,13 +11,13 @@ remove the directory before attempting a clone again.' . ./test-lib.sh -test_expect_failure \ +test_expect_success \ 'clone of non-existent source should fail' \ - 'git-clone foo bar' + '! git-clone foo bar' -test_expect_failure \ +test_expect_success \ 'failed clone should not leave a directory' \ - 'cd bar' + '! test -d bar' # Need a repo to clone test_create_repo foo @@ -27,9 +27,9 @@ test_create_repo foo # source repository given to git-clone should be relative to the # current path not to the target dir -test_expect_failure \ +test_expect_success \ 'clone of non-existent (relative to $PWD) source should fail' \ - 'git-clone ../foo baz' + '! git-clone ../foo baz' test_expect_success \ 'clone should work now that source exists' \ diff --git a/t/t5710-info-alternate.sh b/t/t5710-info-alternate.sh index 1908dc8b06..910ccb4fff 100755 --- a/t/t5710-info-alternate.sh +++ b/t/t5710-info-alternate.sh @@ -87,10 +87,10 @@ test_valid_repo" cd "$base_dir" -test_expect_failure 'that info/alternates is necessary' \ +test_expect_success 'that info/alternates is necessary' \ 'cd C && -rm .git/objects/info/alternates && -test_valid_repo' +rm -f .git/objects/info/alternates && +! (test_valid_repo)' cd "$base_dir" @@ -101,9 +101,11 @@ test_valid_repo' cd "$base_dir" -test_expect_failure 'that relative alternate is only possible for current dir' \ -'cd D && -test_valid_repo' +test_expect_success \ + 'that relative alternate is only possible for current dir' ' + cd D && + ! (test_valid_repo) +' cd "$base_dir" diff --git a/t/t6023-merge-file.sh b/t/t6023-merge-file.sh index ae3b6f2831..86419964b4 100755 --- a/t/t6023-merge-file.sh +++ b/t/t6023-merge-file.sh @@ -66,8 +66,8 @@ test_expect_success "merge result added missing LF" \ "git diff test.txt test2.txt" cp test.txt backup.txt -test_expect_failure "merge with conflicts" \ - "git merge-file test.txt orig.txt new3.txt" +test_expect_success "merge with conflicts" \ + "! git merge-file test.txt orig.txt new3.txt" cat > expect.txt << EOF <<<<<<< test.txt @@ -89,8 +89,8 @@ EOF test_expect_success "expected conflict markers" "git diff test.txt expect.txt" cp backup.txt test.txt -test_expect_failure "merge with conflicts, using -L" \ - "git merge-file -L 1 -L 2 test.txt orig.txt new3.txt" +test_expect_success "merge with conflicts, using -L" \ + "! git merge-file -L 1 -L 2 test.txt orig.txt new3.txt" cat > expect.txt << EOF <<<<<<< 1 @@ -113,8 +113,8 @@ test_expect_success "expected conflict markers, with -L" \ "git diff test.txt expect.txt" sed "s/ tu / TU /" < new1.txt > new5.txt -test_expect_failure "conflict in removed tail" \ - "git merge-file -p orig.txt new1.txt new5.txt > out" +test_expect_success "conflict in removed tail" \ + "! git merge-file -p orig.txt new1.txt new5.txt > out" cat > expect << EOF Dominus regit me, diff --git a/t/t6024-recursive-merge.sh b/t/t6024-recursive-merge.sh index c154f03cf5..149ea8543a 100755 --- a/t/t6024-recursive-merge.sh +++ b/t/t6024-recursive-merge.sh @@ -60,7 +60,7 @@ git update-index a1 && GIT_AUTHOR_DATE="2006-12-12 23:00:08" git commit -m F ' -test_expect_failure "combined merge conflicts" "git merge -m final G" +test_expect_success "combined merge conflicts" "! git merge -m final G" cat > expect << EOF <<<<<<< HEAD:a1 diff --git a/t/t6025-merge-symlinks.sh b/t/t6025-merge-symlinks.sh index 950c2e9b63..6004deb432 100755 --- a/t/t6025-merge-symlinks.sh +++ b/t/t6025-merge-symlinks.sh @@ -30,30 +30,29 @@ echo plain-file > symlink && git add symlink && git-commit -m b-file' -test_expect_failure \ +test_expect_success \ 'merge master into b-symlink, which has a different symbolic link' ' -! git-checkout b-symlink || -git-merge master' +git-checkout b-symlink && +! git-merge master' test_expect_success \ 'the merge result must be a file' ' test -f symlink' -test_expect_failure \ +test_expect_success \ 'merge master into b-file, which has a file instead of a symbolic link' ' -! (git-reset --hard && -git-checkout b-file) || -git-merge master' +git-reset --hard && git-checkout b-file && +! git-merge master' test_expect_success \ 'the merge result must be a file' ' test -f symlink' -test_expect_failure \ +test_expect_success \ 'merge b-file, which has a file instead of a symbolic link, into master' ' -! (git-reset --hard && -git-checkout master) || -git-merge b-file' +git-reset --hard && +git-checkout master && +! git-merge b-file' test_expect_success \ 'the merge result must be a file' ' diff --git a/t/t6101-rev-parse-parents.sh b/t/t6101-rev-parse-parents.sh index 0724864e56..2328b69947 100755 --- a/t/t6101-rev-parse-parents.sh +++ b/t/t6101-rev-parse-parents.sh @@ -26,7 +26,7 @@ test_expect_success 'final^1^1^1 = final^^^' "test $(git rev-parse final^1^1^1) test_expect_success 'final^1^2' "test $(git rev-parse start2) = $(git rev-parse final^1^2)" test_expect_success 'final^1^2 != final^1^1' "test $(git rev-parse final^1^2) != $(git rev-parse final^1^1)" test_expect_success 'final^1^3 not valid' "if git rev-parse --verify final^1^3; then false; else :; fi" -test_expect_failure '--verify start2^1' 'git rev-parse --verify start2^1' +test_expect_success '--verify start2^1' '! git rev-parse --verify start2^1' test_expect_success '--verify start2^0' 'git rev-parse --verify start2^0' test_expect_success 'repack for next test' 'git repack -a -d' diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index 8a23aaf21b..f46ec93c83 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -43,8 +43,8 @@ test_expect_success 'Check atom names are valid' ' test -z "$bad" ' -test_expect_failure 'Check invalid atoms names are errors' ' - git-for-each-ref --format="%(INVALID)" refs/heads +test_expect_success 'Check invalid atoms names are errors' ' + ! git-for-each-ref --format="%(INVALID)" refs/heads ' test_expect_success 'Check format specifiers are ignored in naming date atoms' ' @@ -63,8 +63,8 @@ test_expect_success 'Check valid format specifiers for date fields' ' git-for-each-ref --format="%(authordate:rfc2822)" refs/heads ' -test_expect_failure 'Check invalid format specifiers are errors' ' - git-for-each-ref --format="%(authordate:INVALID)" refs/heads +test_expect_success 'Check invalid format specifiers are errors' ' + ! git-for-each-ref --format="%(authordate:INVALID)" refs/heads ' cat >expected <<\EOF diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh index b730c900b1..b1243b4163 100755 --- a/t/t7001-mv.sh +++ b/t/t7001-mv.sh @@ -78,9 +78,9 @@ test_expect_success \ git diff-tree -r -M --name-status HEAD^ HEAD | \ grep "^R100..*path2/README..*path1/path2/README"' -test_expect_failure \ +test_expect_success \ 'do not move directory over existing directory' \ - 'mkdir path0 && mkdir path0/path2 && git mv path2 path0' + 'mkdir path0 && mkdir path0/path2 && ! git mv path2 path0' test_expect_success \ 'move into "."' \ diff --git a/t/t7002-grep.sh b/t/t7002-grep.sh index 68b2b92879..c8b4f65f38 100755 --- a/t/t7002-grep.sh +++ b/t/t7002-grep.sh @@ -107,8 +107,8 @@ do diff expected actual ' - test_expect_failure "grep -c $L (no /dev/null)" ' - git grep -c test $H | grep -q "/dev/null" + test_expect_success "grep -c $L (no /dev/null)" ' + ! git grep -c test $H | grep -q /dev/null ' done diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index df496a95ff..75cd33bde8 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -26,8 +26,8 @@ test_expect_success 'listing all tags in an empty tree should output nothing' ' test `git-tag | wc -l` -eq 0 ' -test_expect_failure 'looking for a tag in an empty tree should fail' \ - 'tag_exists mytag' +test_expect_success 'looking for a tag in an empty tree should fail' \ + '! (tag_exists mytag)' test_expect_success 'creating a tag in an empty tree should fail' ' ! git-tag mynotag && @@ -83,9 +83,9 @@ test_expect_success \ # special cases for creating tags: -test_expect_failure \ +test_expect_success \ 'trying to create a tag with the name of one existing should fail' \ - 'git tag mytag' + '! git tag mytag' test_expect_success \ 'trying to create a tag with a non-valid name should fail' ' @@ -146,8 +146,8 @@ test_expect_success \ ! tag_exists myhead ' -test_expect_failure 'trying to delete an already deleted tag should fail' \ - 'git-tag -d mytag' +test_expect_success 'trying to delete an already deleted tag should fail' \ + '! git-tag -d mytag' # listing various tags with pattern matching: @@ -265,16 +265,16 @@ test_expect_success \ test $(git rev-parse non-annotated-tag) = $(git rev-parse HEAD) ' -test_expect_failure 'trying to verify an unknown tag should fail' \ - 'git-tag -v unknown-tag' +test_expect_success 'trying to verify an unknown tag should fail' \ + '! git-tag -v unknown-tag' -test_expect_failure \ +test_expect_success \ 'trying to verify a non-annotated and non-signed tag should fail' \ - 'git-tag -v non-annotated-tag' + '! git-tag -v non-annotated-tag' -test_expect_failure \ +test_expect_success \ 'trying to verify many non-annotated or unknown tags, should fail' \ - 'git-tag -v unknown-tag1 non-annotated-tag unknown-tag2' + '! git-tag -v unknown-tag1 non-annotated-tag unknown-tag2' # creating annotated tags: @@ -1027,21 +1027,21 @@ test_expect_success \ # try to sign with bad user.signingkey git config user.signingkey BobTheMouse -test_expect_failure \ +test_expect_success \ 'git-tag -s fails if gpg is misconfigured' \ - 'git tag -s -m tail tag-gpg-failure' + '! git tag -s -m tail tag-gpg-failure' git config --unset user.signingkey # try to verify without gpg: rm -rf gpghome -test_expect_failure \ +test_expect_success \ 'verify signed tag fails when public key is not present' \ - 'git-tag -v signed-tag' + '! git-tag -v signed-tag' -test_expect_failure \ +test_expect_success \ 'git-tag -a fails if tag annotation is empty' ' - GIT_EDITOR=cat git tag -a initial-comment + ! (GIT_EDITOR=cat git tag -a initial-comment) ' test_expect_success \ diff --git a/t/t7101-reset.sh b/t/t7101-reset.sh index 66d40430b2..0d9874bfd7 100755 --- a/t/t7101-reset.sh +++ b/t/t7101-reset.sh @@ -36,28 +36,28 @@ test_expect_success \ 'test -d path0 && test -f path0/COPYING' -test_expect_failure \ +test_expect_success \ 'checking lack of path1/path2/COPYING' \ - 'test -f path1/path2/COPYING' + '! test -f path1/path2/COPYING' -test_expect_failure \ +test_expect_success \ 'checking lack of path1/COPYING' \ - 'test -f path1/COPYING' + '! test -f path1/COPYING' -test_expect_failure \ +test_expect_success \ 'checking lack of COPYING' \ - 'test -f COPYING' + '! test -f COPYING' -test_expect_failure \ +test_expect_success \ 'checking checking lack of path1/COPYING-TOO' \ - 'test -f path0/COPYING-TOO' + '! test -f path0/COPYING-TOO' -test_expect_failure \ +test_expect_success \ 'checking lack of path1/path2' \ - 'test -d path1/path2' + '! test -d path1/path2' -test_expect_failure \ +test_expect_success \ 'checking lack of path1' \ - 'test -d path1' + '! test -d path1' test_done diff --git a/t/t7501-commit.sh b/t/t7501-commit.sh index d1a415a126..21dcf550fc 100755 --- a/t/t7501-commit.sh +++ b/t/t7501-commit.sh @@ -17,49 +17,49 @@ test_expect_success \ git-add file && \ git-status | grep 'Initial commit'" -test_expect_failure \ +test_expect_success \ "fail initial amend" \ - "git-commit --amend" + "! git-commit --amend" test_expect_success \ "initial commit" \ "git-commit -m initial" -test_expect_failure \ +test_expect_success \ "invalid options 1" \ - "git-commit -m foo -m bar -F file" + "! git-commit -m foo -m bar -F file" -test_expect_failure \ +test_expect_success \ "invalid options 2" \ - "git-commit -C HEAD -m illegal" + "! git-commit -C HEAD -m illegal" -test_expect_failure \ +test_expect_success \ "using paths with -a" \ "echo King of the bongo >file && - git-commit -m foo -a file" + ! git-commit -m foo -a file" -test_expect_failure \ +test_expect_success \ "using paths with --interactive" \ "echo bong-o-bong >file && - echo 7 | git-commit -m foo --interactive file" + ! echo 7 | git-commit -m foo --interactive file" -test_expect_failure \ +test_expect_success \ "using invalid commit with -C" \ - "git-commit -C bogus" + "! git-commit -C bogus" -test_expect_failure \ +test_expect_success \ "testing nothing to commit" \ - "git-commit -m initial" + "! git-commit -m initial" test_expect_success \ "next commit" \ "echo 'bongo bongo bongo' >file \ git-commit -m next -a" -test_expect_failure \ +test_expect_success \ "commit message from non-existing file" \ "echo 'more bongo: bongo bongo bongo bongo' >file && \ - git-commit -F gah -a" + ! git-commit -F gah -a" # Empty except stray tabs and spaces on a few lines. sed -e 's/@$//' >msg <<EOF @@ -68,9 +68,9 @@ sed -e 's/@$//' >msg <<EOF @ Signed-off-by: hula EOF -test_expect_failure \ +test_expect_success \ "empty commit message" \ - "git-commit -F msg -a" + "! git-commit -F msg -a" test_expect_success \ "commit message from file" \ @@ -88,10 +88,10 @@ test_expect_success \ "amend commit" \ "VISUAL=./editor git-commit --amend" -test_expect_failure \ +test_expect_success \ "passing -m and -F" \ "echo 'enough with the bongos' >file && \ - git-commit -F msg -m amending ." + ! git-commit -F msg -m amending ." test_expect_success \ "using message from other commit" \ diff --git a/t/t7503-pre-commit-hook.sh b/t/t7503-pre-commit-hook.sh index d787cac2f7..2dd5a5e302 100755 --- a/t/t7503-pre-commit-hook.sh +++ b/t/t7503-pre-commit-hook.sh @@ -52,11 +52,11 @@ cat > "$HOOK" <<EOF exit 1 EOF -test_expect_failure 'with failing hook' ' +test_expect_success 'with failing hook' ' echo "another" >> file && git add file && - git commit -m "another" + ! git commit -m "another" ' diff --git a/t/t7504-commit-msg-hook.sh b/t/t7504-commit-msg-hook.sh index 751b11300b..eff36aaee3 100755 --- a/t/t7504-commit-msg-hook.sh +++ b/t/t7504-commit-msg-hook.sh @@ -98,20 +98,20 @@ cat > "$HOOK" <<EOF exit 1 EOF -test_expect_failure 'with failing hook' ' +test_expect_success 'with failing hook' ' echo "another" >> file && git add file && - git commit -m "another" + ! git commit -m "another" ' -test_expect_failure 'with failing hook (editor)' ' +test_expect_success 'with failing hook (editor)' ' echo "more another" >> file && git add file && echo "more another" > FAKE_MSG && - GIT_EDITOR="$FAKE_EDITOR" git commit + ! (GIT_EDITOR="$FAKE_EDITOR" git commit) ' diff --git a/t/t9100-git-svn-basic.sh b/t/t9100-git-svn-basic.sh index 614cf50d19..4e24ab3a7d 100755 --- a/t/t9100-git-svn-basic.sh +++ b/t/t9100-git-svn-basic.sh @@ -56,19 +56,19 @@ test_expect_success "$name" " name='detect node change from file to directory #1' -test_expect_failure "$name" " +test_expect_success "$name" " mkdir dir/new_file && mv dir/file dir/new_file/file && mv dir/new_file dir/file && git update-index --remove dir/file && git update-index --add dir/file/file && - git commit -m '$name' && - git-svn set-tree --find-copies-harder --rmdir \ + git commit -m '$name' && + ! git-svn set-tree --find-copies-harder --rmdir \ remotes/git-svn..mybranch" || true name='detect node change from directory to file #1' -test_expect_failure "$name" " +test_expect_success "$name" " rm -rf dir '$GIT_DIR'/index && git checkout -f -b mybranch2 remotes/git-svn && mv bar/zzz zzz && @@ -77,12 +77,12 @@ test_expect_failure "$name" " git update-index --remove -- bar/zzz && git update-index --add -- bar && git commit -m '$name' && - git-svn set-tree --find-copies-harder --rmdir \ + ! git-svn set-tree --find-copies-harder --rmdir \ remotes/git-svn..mybranch2" || true name='detect node change from file to directory #2' -test_expect_failure "$name" " +test_expect_success "$name" " rm -f '$GIT_DIR'/index && git checkout -f -b mybranch3 remotes/git-svn && rm bar/zzz && @@ -91,12 +91,12 @@ test_expect_failure "$name" " echo yyy > bar/zzz/yyy && git update-index --add bar/zzz/yyy && git commit -m '$name' && - git-svn set-tree --find-copies-harder --rmdir \ + ! git-svn set-tree --find-copies-harder --rmdir \ remotes/git-svn..mybranch3" || true name='detect node change from directory to file #2' -test_expect_failure "$name" " +test_expect_success "$name" " rm -f '$GIT_DIR'/index && git checkout -f -b mybranch4 remotes/git-svn && rm -rf dir && @@ -105,7 +105,7 @@ test_expect_failure "$name" " echo asdf > dir && git update-index --add -- dir && git commit -m '$name' && - git-svn set-tree --find-copies-harder --rmdir \ + ! git-svn set-tree --find-copies-harder --rmdir \ remotes/git-svn..mybranch4" || true @@ -213,18 +213,18 @@ EOF test_expect_success "$name" "git diff a expected" -test_expect_failure 'exit if remote refs are ambigious' " +test_expect_success 'exit if remote refs are ambigious' " git config --add svn-remote.svn.fetch \ bar:refs/remotes/git-svn && - git-svn migrate - " + ! git-svn migrate +" -test_expect_failure 'exit if init-ing a would clobber a URL' " +test_expect_success 'exit if init-ing a would clobber a URL' " svnadmin create ${PWD}/svnrepo2 && svn mkdir -m 'mkdir bar' ${svnrepo}2/bar && git config --unset svn-remote.svn.fetch \ '^bar:refs/remotes/git-svn$' && - git-svn init ${svnrepo}2/bar + ! git-svn init ${svnrepo}2/bar " test_expect_success \ diff --git a/t/t9106-git-svn-commit-diff-clobber.sh b/t/t9106-git-svn-commit-diff-clobber.sh index 79b7968eaf..f74ab1269e 100755 --- a/t/t9106-git-svn-commit-diff-clobber.sh +++ b/t/t9106-git-svn-commit-diff-clobber.sh @@ -24,11 +24,11 @@ test_expect_success 'commit change from svn side' " rm -rf t.svn " -test_expect_failure 'commit conflicting change from git' " +test_expect_success 'commit conflicting change from git' " echo second line from git >> file && git commit -a -m 'second line from git' && - git-svn commit-diff -r1 HEAD~1 HEAD $svnrepo - " || true + ! git-svn commit-diff -r1 HEAD~1 HEAD $svnrepo +" test_expect_success 'commit complementing change from git' " git reset --hard HEAD~1 && @@ -39,7 +39,7 @@ test_expect_success 'commit complementing change from git' " git-svn commit-diff -r2 HEAD~1 HEAD $svnrepo " -test_expect_failure 'dcommit fails to commit because of conflict' " +test_expect_success 'dcommit fails to commit because of conflict' " git-svn init $svnrepo && git-svn fetch && git reset --hard refs/remotes/git-svn && @@ -52,8 +52,8 @@ test_expect_failure 'dcommit fails to commit because of conflict' " rm -rf t.svn && echo 'fourth line from git' >> file && git commit -a -m 'fourth line from git' && - git-svn dcommit - " || true + ! git-svn dcommit + " test_expect_success 'dcommit does the svn equivalent of an index merge' " git reset --hard refs/remotes/git-svn && @@ -76,15 +76,15 @@ test_expect_success 'commit another change from svn side' " rm -rf t.svn " -test_expect_failure 'multiple dcommit from git-svn will not clobber svn' " +test_expect_success 'multiple dcommit from git-svn will not clobber svn' " git reset --hard refs/remotes/git-svn && echo new file >> new-file && git update-index --add new-file && git commit -a -m 'new file' && echo clobber > file && git commit -a -m 'clobber' && - git svn dcommit - " || true + ! git svn dcommit + " test_expect_success 'check that rebase really failed' 'test -d .dotest' diff --git a/t/t9106-git-svn-dcommit-clobber-series.sh b/t/t9106-git-svn-dcommit-clobber-series.sh index 745254665d..ca8a00ed0a 100755 --- a/t/t9106-git-svn-dcommit-clobber-series.sh +++ b/t/t9106-git-svn-dcommit-clobber-series.sh @@ -54,10 +54,10 @@ test_expect_success 'change file but in unrelated area' " test x\"\`sed -n -e 61p < file\`\" = x6611 " -test_expect_failure 'attempt to dcommit with a dirty index' ' +test_expect_success 'attempt to dcommit with a dirty index' ' echo foo >>file && git add file && - git svn dcommit + ! git svn dcommit ' test_done diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index 0595041af5..cceedbb2b7 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -165,9 +165,9 @@ from refs/heads/master M 755 0000000000000000000000000000000000000001 zero1 INPUT_END -test_expect_failure \ - 'B: fail on invalid blob sha1' \ - 'git-fast-import <input' +test_expect_success 'B: fail on invalid blob sha1' ' + ! git-fast-import <input +' rm -f .git/objects/pack_* .git/objects/index_* cat >input <<INPUT_END @@ -180,9 +180,9 @@ COMMIT from refs/heads/master INPUT_END -test_expect_failure \ - 'B: fail on invalid branch name ".badbranchname"' \ - 'git-fast-import <input' +test_expect_success 'B: fail on invalid branch name ".badbranchname"' ' + ! git-fast-import <input +' rm -f .git/objects/pack_* .git/objects/index_* cat >input <<INPUT_END @@ -195,9 +195,9 @@ COMMIT from refs/heads/master INPUT_END -test_expect_failure \ - 'B: fail on invalid branch name "bad[branch]name"' \ - 'git-fast-import <input' +test_expect_success 'B: fail on invalid branch name "bad[branch]name"' ' + ! git-fast-import <input +' rm -f .git/objects/pack_* .git/objects/index_* cat >input <<INPUT_END @@ -339,9 +339,9 @@ COMMIT from refs/heads/branch^0 INPUT_END -test_expect_failure \ - 'E: rfc2822 date, --date-format=raw' \ - 'git-fast-import --date-format=raw <input' +test_expect_success 'E: rfc2822 date, --date-format=raw' ' + ! git-fast-import --date-format=raw <input +' test_expect_success \ 'E: rfc2822 date, --date-format=rfc2822' \ 'git-fast-import --date-format=rfc2822 <input' diff --git a/t/t9400-git-cvsserver-server.sh b/t/t9400-git-cvsserver-server.sh index 75d1ce433d..0a20971ebb 100755 --- a/t/t9400-git-cvsserver-server.sh +++ b/t/t9400-git-cvsserver-server.sh @@ -156,15 +156,19 @@ test_expect_success 'req_Root (strict paths)' \ 'cat request-anonymous | git-cvsserver --strict-paths pserver $SERVERDIR >log 2>&1 && tail -n1 log | grep -q "^I LOVE YOU$"' -test_expect_failure 'req_Root failure (strict-paths)' \ - 'cat request-anonymous | git-cvsserver --strict-paths pserver $WORKDIR >log 2>&1' +test_expect_success 'req_Root failure (strict-paths)' ' + ! cat request-anonymous | + git-cvsserver --strict-paths pserver $WORKDIR >log 2>&1 +' test_expect_success 'req_Root (w/o strict-paths)' \ 'cat request-anonymous | git-cvsserver pserver $WORKDIR/ >log 2>&1 && tail -n1 log | grep -q "^I LOVE YOU$"' -test_expect_failure 'req_Root failure (w/o strict-paths)' \ - 'cat request-anonymous | git-cvsserver pserver $WORKDIR/gitcvs >log 2>&1' +test_expect_success 'req_Root failure (w/o strict-paths)' ' + ! cat request-anonymous | + git-cvsserver pserver $WORKDIR/gitcvs >log 2>&1 +' cat >request-base <<EOF BEGIN AUTH REQUEST @@ -179,8 +183,10 @@ test_expect_success 'req_Root (base-path)' \ 'cat request-base | git-cvsserver --strict-paths --base-path $WORKDIR/ pserver $SERVERDIR >log 2>&1 && tail -n1 log | grep -q "^I LOVE YOU$"' -test_expect_failure 'req_Root failure (base-path)' \ - 'cat request-anonymous | git-cvsserver --strict-paths --base-path $WORKDIR pserver $SERVERDIR >log 2>&1' +test_expect_success 'req_Root failure (base-path)' ' + ! cat request-anonymous | + git-cvsserver --strict-paths --base-path $WORKDIR pserver $SERVERDIR >log 2>&1 +' GIT_DIR="$SERVERDIR" git config --bool gitcvs.enabled false || exit 1 @@ -188,9 +194,8 @@ test_expect_success 'req_Root (export-all)' \ 'cat request-anonymous | git-cvsserver --export-all pserver $WORKDIR >log 2>&1 && tail -n1 log | grep -q "^I LOVE YOU$"' -test_expect_failure 'req_Root failure (export-all w/o whitelist)' \ - 'cat request-anonymous | git-cvsserver --export-all pserver >log 2>&1 || - false' +test_expect_success 'req_Root failure (export-all w/o whitelist)' \ + '! (cat request-anonymous | git-cvsserver --export-all pserver >log 2>&1 || false)' test_expect_success 'req_Root (everything together)' \ 'cat request-base | git-cvsserver --export-all --strict-paths --base-path $WORKDIR/ pserver $SERVERDIR >log 2>&1 && @@ -290,15 +295,16 @@ test_expect_success 'cvs update (update existing file)' \ cd "$WORKDIR" #TODO: cvsserver doesn't support update w/o -d -test_expect_failure "cvs update w/o -d doesn't create subdir (TODO)" \ - 'mkdir test && +test_expect_failure "cvs update w/o -d doesn't create subdir (TODO)" ' + mkdir test && echo >test/empty && git add test && git commit -q -m "Single Subdirectory" && git push gitcvs.git >/dev/null && cd cvswork && GIT_CONFIG="$git_config" cvs -Q update && - test ! -d test' + test ! -d test +' cd "$WORKDIR" test_expect_success 'cvs update (subdirectories)' \ diff --git a/t/test-lib.sh b/t/test-lib.sh index 142540e1b1..9a3c0b4cad 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -139,6 +139,8 @@ fi test_failure=0 test_count=0 +test_fixed=0 +test_broken=0 trap 'echo >&5 "FATAL: Unexpected exit with code $?"; exit 1' exit @@ -171,6 +173,17 @@ test_failure_ () { test "$immediate" = "" || { trap - exit; exit 1; } } +test_known_broken_ok_ () { + test_count=$(expr "$test_count" + 1) + test_fixed=$(($test_fixed+1)) + say_color "" " FIXED $test_count: $@" +} + +test_known_broken_failure_ () { + test_count=$(expr "$test_count" + 1) + test_broken=$(($test_broken+1)) + say_color skip " still broken $test_count: $@" +} test_debug () { test "$debug" = "" || eval "$1" @@ -211,13 +224,13 @@ test_expect_failure () { error "bug in the test script: not 2 parameters to test-expect-failure" if ! test_skip "$@" then - say >&3 "expecting failure: $2" + say >&3 "checking known breakage: $2" test_run_ "$2" - if [ "$?" = 0 -a "$eval_ret" != 0 -a "$eval_ret" -lt 129 ] + if [ "$?" = 0 -a "$eval_ret" = 0 ] then - test_ok_ "$1" + test_known_broken_ok_ "$1" else - test_failure_ "$@" + test_known_broken_failure_ "$1" fi fi echo >&3 "" @@ -274,6 +287,15 @@ test_create_repo () { test_done () { trap - exit + + if test "$test_fixed" != 0 + then + say_color pass "fixed $test_fixed known breakage(s)" + fi + if test "$test_broken" != 0 + then + say_color error "still have $test_broken known breakage(s)" + fi case "$test_failure" in 0) # We could: |