Mark t1301 permission test to depend on POSIXPERM

This prepares the topic for inclusion to master.

1 files changed, 186 insertions, 29 deletions

diff --git a/t/test-lib.sh b/t/test-lib.sh
index 0c455929e4..4bd986f430 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -3,6 +3,22 @@
 # Copyright (c) 2005 Junio C Hamano
 #
 
+# if --tee was passed, write the output not only to the terminal, but
+# additionally to the file test-results/$BASENAME.out, too.
+case "$GIT_TEST_TEE_STARTED, $* " in
+done,*)
+	# do not redirect again
+	;;
+*' --tee '*|*' --va'*)
+	mkdir -p test-results
+	BASE=test-results/$(basename "$0" .sh)
+	(GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1;
+	 echo $? > $BASE.exit) | tee $BASE.out
+	test "$(cat $BASE.exit)" = 0
+	exit
+	;;
+esac
+
 # Keep the original TERM for say_color
 ORIGINAL_TERM=$TERM
 
@@ -94,6 +110,10 @@ do
 	--no-python)
 		# noop now...
 		shift ;;
+	--va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind)
+		valgrind=t; verbose=t; shift ;;
+	--tee)
+		shift ;; # was handled already
 	*)
 		break ;;
 	esac
@@ -218,18 +238,50 @@ test_merge () {
 	git tag "$1"
 }
 
+# This function helps systems where core.filemode=false is set.
+# Use it instead of plain 'chmod +x' to set or unset the executable bit
+# of a file in the working directory and add it to the index.
+
+test_chmod () {
+	chmod "$@" &&
+	git update-index --add "--chmod=$@"
+}
+
+# Use test_set_prereq to tell that a particular prerequisite is available.
+# The prerequisite can later be checked for in two ways:
+#
+# - Explicitly using test_have_prereq.
+#
+# - Implicitly by specifying the prerequisite tag in the calls to
+#   test_expect_{success,failure,code}.
+#
+# The single parameter is the prerequisite tag (a simple word, in all
+# capital letters by convention).
+
+test_set_prereq () {
+	satisfied="$satisfied$1 "
+}
+satisfied=" "
+
+test_have_prereq () {
+	case $satisfied in
+	*" $1 "*)
+		: yes, have it ;;
+	*)
+		! : nope ;;
+	esac
+}
+
 # You are not expected to call test_ok_ and test_failure_ directly, use
 # the text_expect_* functions instead.
 
 test_ok_ () {
-	test_count=$(expr "$test_count" + 1)
-	test_success=$(expr "$test_success" + 1)
+	test_success=$(($test_success + 1))
 	say_color "" "  ok $test_count: $@"
 }
 
 test_failure_ () {
-	test_count=$(expr "$test_count" + 1)
-	test_failure=$(expr "$test_failure" + 1);
+	test_failure=$(($test_failure + 1))
 	say_color error "FAIL $test_count: $1"
 	shift
 	echo "$@" | sed -e 's/^/	/'
@@ -237,13 +289,11 @@ test_failure_ () {
 }
 
 test_known_broken_ok_ () {
-	test_count=$(expr "$test_count" + 1)
 	test_fixed=$(($test_fixed+1))
 	say_color "" "  FIXED $test_count: $@"
 }
 
 test_known_broken_failure_ () {
-	test_count=$(expr "$test_count" + 1)
 	test_broken=$(($test_broken+1))
 	say_color skip "  still broken $test_count: $@"
 }
@@ -259,20 +309,23 @@ test_run_ () {
 }
 
 test_skip () {
-	this_test=$(expr "./$0" : '.*/\(t[0-9]*\)-[^/]*$')
-	this_test="$this_test.$(expr "$test_count" + 1)"
+	test_count=$(($test_count+1))
 	to_skip=
 	for skp in $GIT_SKIP_TESTS
 	do
-		case "$this_test" in
+		case $this_test.$test_count in
 		$skp)
 			to_skip=t
 		esac
 	done
+	if test -z "$to_skip" && test -n "$prereq" &&
+	   ! test_have_prereq "$prereq"
+	then
+		to_skip=t
+	fi
 	case "$to_skip" in
 	t)
 		say_color skip >&3 "skipping test: $@"
-		test_count=$(expr "$test_count" + 1)
 		say_color skip "skip $test_count: $1"
 		: true
 		;;
@@ -283,8 +336,9 @@ test_skip () {
 }
 
 test_expect_failure () {
+	test "$#" = 3 && { prereq=$1; shift; } || prereq=
 	test "$#" = 2 ||
-	error "bug in the test script: not 2 parameters to test-expect-failure"
+	error "bug in the test script: not 2 or 3 parameters to test-expect-failure"
 	if ! test_skip "$@"
 	then
 		say >&3 "checking known breakage: $2"
@@ -300,8 +354,9 @@ test_expect_failure () {
 }
 
 test_expect_success () {
+	test "$#" = 3 && { prereq=$1; shift; } || prereq=
 	test "$#" = 2 ||
-	error "bug in the test script: not 2 parameters to test-expect-success"
+	error "bug in the test script: not 2 or 3 parameters to test-expect-success"
 	if ! test_skip "$@"
 	then
 		say >&3 "expecting success: $2"
@@ -317,8 +372,9 @@ test_expect_success () {
 }
 
 test_expect_code () {
+	test "$#" = 4 && { prereq=$1; shift; } || prereq=
 	test "$#" = 3 ||
-	error "bug in the test script: not 3 parameters to test-expect-code"
+	error "bug in the test script: not 3 or 4 parameters to test-expect-code"
 	if ! test_skip "$@"
 	then
 		say >&3 "expecting exit code $1: $3"
@@ -342,15 +398,16 @@ test_expect_code () {
 # Usage: test_external description command arguments...
 # Example: test_external 'Perl API' perl ../path/to/test.pl
 test_external () {
-	test "$#" -eq 3 ||
-	error >&5 "bug in the test script: not 3 parameters to test_external"
+	test "$#" = 4 && { prereq=$1; shift; } || prereq=
+	test "$#" = 3 ||
+	error >&5 "bug in the test script: not 3 or 4 parameters to test_external"
 	descr="$1"
 	shift
 	if ! test_skip "$descr" "$@"
 	then
 		# Announce the script to reduce confusion about the
 		# test output that follows.
-		say_color "" " run $(expr "$test_count" + 1): $descr ($*)"
+		say_color "" " run $test_count: $descr ($*)"
 		# Run command; redirect its stderr to &4 as in
 		# test_run_, but keep its stdout on our stdout even in
 		# non-verbose mode.
@@ -434,7 +491,7 @@ test_create_repo () {
 	repo="$1"
 	mkdir -p "$repo"
 	cd "$repo" || error "Cannot setup test environment"
-	"$GIT_EXEC_PATH/git" init "--template=$GIT_EXEC_PATH/templates/blt/" >&3 2>&4 ||
+	"$GIT_EXEC_PATH/git-init" "--template=$owd/../templates/blt/" >&3 2>&4 ||
 	error "cannot run git init -- have you built things yet?"
 	mv .git/hooks .git/hooks-disabled
 	cd "$owd"
@@ -444,7 +501,7 @@ test_done () {
 	trap - EXIT
 	test_results_dir="$TEST_DIRECTORY/test-results"
 	mkdir -p "$test_results_dir"
-	test_results_path="$test_results_dir/${0%-*}-$$"
+	test_results_path="$test_results_dir/${0%.sh}-$$"
 
 	echo "total $test_count" >> $test_results_path
 	echo "success $test_success" >> $test_results_path
@@ -466,14 +523,6 @@ test_done () {
 	fi
 	case "$test_failure" in
 	0)
-		# We could:
-		# cd .. && rm -fr 'trash directory'
-		# but that means we forbid any tests that use their own
-		# subdirectory from calling test_done without coming back
-		# to where they started from.
-		# The Makefile provided will clean this test area so
-		# we will leave things as they are.
-
 		say_color pass "passed all $msg"
 
 		test -d "$remove_trash" &&
@@ -492,8 +541,81 @@ test_done () {
 # Test the binaries we have just built.  The tests are kept in
 # t/ subdirectory and are run in 'trash directory' subdirectory.
 TEST_DIRECTORY=$(pwd)
-PATH=$TEST_DIRECTORY/..:$PATH
-GIT_EXEC_PATH=$(pwd)/..
+if test -z "$valgrind"
+then
+	if test -z "$GIT_TEST_INSTALLED"
+	then
+		PATH=$TEST_DIRECTORY/..:$PATH
+		GIT_EXEC_PATH=$TEST_DIRECTORY/..
+	else
+		GIT_EXEC_PATH=$($GIT_TEST_INSTALLED/git --exec-path)  ||
+		error "Cannot run git from $GIT_TEST_INSTALLED."
+		PATH=$GIT_TEST_INSTALLED:$TEST_DIRECTORY/..:$PATH
+		GIT_EXEC_PATH=${GIT_TEST_EXEC_PATH:-$GIT_EXEC_PATH}
+	fi
+else
+	make_symlink () {
+		test -h "$2" &&
+		test "$1" = "$(readlink "$2")" || {
+			# be super paranoid
+			if mkdir "$2".lock
+			then
+				rm -f "$2" &&
+				ln -s "$1" "$2" &&
+				rm -r "$2".lock
+			else
+				while test -d "$2".lock
+				do
+					say "Waiting for lock on $2."
+					sleep 1
+				done
+			fi
+		}
+	}
+
+	make_valgrind_symlink () {
+		# handle only executables
+		test -x "$1" || return
+
+		base=$(basename "$1")
+		symlink_target=$TEST_DIRECTORY/../$base
+		# do not override scripts
+		if test -x "$symlink_target" &&
+		    test ! -d "$symlink_target" &&
+		    test "#!" != "$(head -c 2 < "$symlink_target")"
+		then
+			symlink_target=../valgrind.sh
+		fi
+		case "$base" in
+		*.sh|*.perl)
+			symlink_target=../unprocessed-script
+		esac
+		# create the link, or replace it if it is out of date
+		make_symlink "$symlink_target" "$GIT_VALGRIND/bin/$base" || exit
+	}
+
+	# override all git executables in TEST_DIRECTORY/..
+	GIT_VALGRIND=$TEST_DIRECTORY/valgrind
+	mkdir -p "$GIT_VALGRIND"/bin
+	for file in $TEST_DIRECTORY/../git* $TEST_DIRECTORY/../test-*
+	do
+		make_valgrind_symlink $file
+	done
+	OLDIFS=$IFS
+	IFS=:
+	for path in $PATH
+	do
+		ls "$path"/git-* 2> /dev/null |
+		while read file
+		do
+			make_valgrind_symlink "$file"
+		done
+	done
+	IFS=$OLDIFS
+	PATH=$GIT_VALGRIND/bin:$PATH
+	GIT_EXEC_PATH=$GIT_VALGRIND/bin
+	export GIT_VALGRIND
+fi
 GIT_TEMPLATE_DIR=$(pwd)/../templates/blt
 unset GIT_CONFIG
 GIT_CONFIG_NOSYSTEM=1
@@ -528,7 +650,8 @@ test_create_repo "$test"
 # in subprocesses like git equals our $PWD (for pathname comparisons).
 cd -P "$test" || exit 1
 
-this_test=$(expr "./$0" : '.*/\(t[0-9]*\)-[^/]*$')
+this_test=${0##*/}
+this_test=${this_test%%-*}
 for skp in $GIT_SKIP_TESTS
 do
 	to_skip=
@@ -546,3 +669,37 @@ do
 		test_done
 	esac
 done
+
+# Fix some commands on Windows
+case $(uname -s) in
+*MINGW*)
+	# Windows has its own (incompatible) sort and find
+	sort () {
+		/usr/bin/sort "$@"
+	}
+	find () {
+		/usr/bin/find "$@"
+	}
+	sum () {
+		md5sum "$@"
+	}
+	# git sees Windows-style pwd
+	pwd () {
+		builtin pwd -W
+	}
+	# no POSIX permissions
+	# backslashes in pathspec are converted to '/'
+	# exec does not inherit the PID
+	;;
+*)
+	test_set_prereq POSIXPERM
+	test_set_prereq BSLASHPSPEC
+	test_set_prereq EXECKEEPSPID
+	;;
+esac
+
+test -z "$NO_PERL" && test_set_prereq PERL
+
+# test whether the filesystem supports symbolic links
+ln -s x y 2>/dev/null && test -h y 2>/dev/null && test_set_prereq SYMLINKS
+rm -f y