Merge branch 'mw/sendemail'

* mw/sendemail:
  bash completion: Add --[no-]validate to "git send-email"
  send-email: signedoffcc -> signedoffbycc, but handle both
  Docs: send-email: Create logical groupings for man text
  Docs: send-email: Create logical groupings for --help text
  Docs: send-email: Remove unnecessary config variable description
  Docs: send-email: --chain_reply_to -> --[no-]chain-reply-to
  send-email: change --no-validate to boolean --[no-]validate
  Docs: send-email: Man page option ordering
  Docs: send-email usage text much sexier
  Docs: send-email's usage text and man page mention same options

1 files changed, 103 insertions, 139 deletions

diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt
index 3c3e1b0e77..82f505686e 100644
--- a/Documentation/git-send-email.txt
+++ b/Documentation/git-send-email.txt
@@ -11,7 +11,6 @@ SYNOPSIS
 'git send-email' [options] <file|directory> [... file|directory]
 
 
-
 DESCRIPTION
 -----------
 Takes the patches given on the command line and emails them out.
@@ -20,12 +19,16 @@ The header of the email is configurable by command line options.  If not
 specified on the command line, the user will be prompted with a ReadLine
 enabled interface to provide the necessary information.
 
+
 OPTIONS
 -------
-The options available are:
+
+Composing
+~~~~~~~~~
 
 --bcc::
-	Specify a "Bcc:" value for each email.
+	Specify a "Bcc:" value for each email. Default is the value of
+	'sendemail.bcc'.
 +
 The --bcc option must be repeated for each user you want on the bcc list.
 
@@ -34,22 +37,6 @@ The --bcc option must be repeated for each user you want on the bcc list.
 +
 The --cc option must be repeated for each user you want on the cc list.
 
---cc-cmd::
-	Specify a command to execute once per patch file which
-	should generate patch file specific "Cc:" entries.
-	Output of this command must be single email address per line.
-	Default is the value of 'sendemail.cccmd' configuration value.
-
---chain-reply-to::
---no-chain-reply-to::
-	If this is set, each email will be sent as a reply to the previous
-	email sent.  If disabled with "--no-chain-reply-to", all emails after
-	the first will be sent as replies to the first email sent.  When using
-	this, it is recommended that the first file given be an overview of the
-	entire patch series.
-	Default is the value of the 'sendemail.chainreplyto' configuration
-	value; if that is unspecified, default to --chain-reply-to.
-
 --compose::
 	Use $GIT_EDITOR, core.editor, $VISUAL, or $EDITOR to edit an
 	introductory message for the patch series.
@@ -66,22 +53,47 @@ The --cc option must be repeated for each user you want on the cc list.
 	Only necessary if --compose is also set.  If --compose
 	is not set, this will be prompted for.
 
---signed-off-by-cc::
---no-signed-off-by-cc::
-        If this is set, add emails found in Signed-off-by: or Cc: lines to the
-        cc list.
-        Default is the value of 'sendemail.signedoffcc' configuration value;
-        if that is unspecified, default to --signed-off-by-cc.
+--subject::
+	Specify the initial subject of the email thread.
+	Only necessary if --compose is also set.  If --compose
+	is not set, this will be prompted for.
+
+--to::
+	Specify the primary recipient of the emails generated. Generally, this
+	will be the upstream maintainer of the project involved. Default is the
+	value of the 'sendemail.to' configuration value; if that is unspecified,
+	this will be prompted for.
++
+The --to option must be repeated for each user you want on the to list.
 
---quiet::
-	Make git-send-email less verbose.  One line per email should be
-	all that is output.
 
---identity::
-	A configuration identity. When given, causes values in the
-	'sendemail.<identity>' subsection to take precedence over
-	values in the 'sendemail' section. The default identity is
-	the value of 'sendemail.identity'.
+Sending
+~~~~~~~
+
+--envelope-sender::
+	Specify the envelope sender used to send the emails.
+	This is useful if your default address is not the address that is
+	subscribed to a list. If you use the sendmail binary, you must have
+	suitable privileges for the -f parameter. Default is the value of
+	the 'sendemail.envelopesender' configuration variable; if that is
+	unspecified, choosing the envelope sender is left to your MTA.
+
+--smtp-encryption::
+	Specify the encryption to use, either 'ssl' or 'tls'.  Any other
+	value reverts to plain SMTP.  Default is the value of
+	'sendemail.smtpencryption'.
+
+--smtp-pass::
+	Password for SMTP-AUTH. The argument is optional: If no
+	argument is specified, then the empty string is used as
+	the password. Default is the value of 'sendemail.smtppass',
+	however '--smtp-pass' always overrides this value.
++
+Furthermore, passwords need not be specified in configuration files
+or on the command line. If a username has been specified (with
+'--smtp-user' or a 'sendemail.smtpuser'), but no password has been
+specified (with '--smtp-pass' or 'sendemail.smtppass'), then the
+user is prompted for a password while the input is masked for privacy.
 
 --smtp-server::
 	If set, specifies the outgoing SMTP server to use (e.g.
@@ -96,61 +108,44 @@ The --cc option must be repeated for each user you want on the cc list.
 --smtp-server-port::
 	Specifies a port different from the default port (SMTP
 	servers typically listen to smtp port 25 and ssmtp port
-	465).
+	465). This can be set with 'sendemail.smtpserverport'.
+
+--smtp-ssl::
+	Legacy alias for '--smtp-encryption ssl'.
 
 --smtp-user::
-	Username for SMTP-AUTH. In place of this option, the following
-	configuration variables can be specified:
-+
---
-		* sendemail.smtpuser
-		* sendemail.<identity>.smtpuser (see sendemail.identity).
---
-+
-However, --smtp-user always overrides these variables.
-+
-If a username is not specified (with --smtp-user or a
-configuration variable), then authentication is not attempted.
+	Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser';
+	if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'),
+	then authentication is not attempted.
 
---smtp-pass::
-	Password for SMTP-AUTH. The argument is optional: If no
-	argument is specified, then the empty string is used as
-	the password.
-+
-In place of this option, the following configuration variables
-can be specified:
-+
---
-		* sendemail.smtppass
-		* sendemail.<identity>.smtppass (see sendemail.identity).
---
-+
-However, --smtp-pass always overrides these variables.
-+
-Furthermore, passwords need not be specified in configuration files
-or on the command line. If a username has been specified (with
---smtp-user or a configuration variable), but no password has been
-specified (with --smtp-pass or a configuration variable), then the
-user is prompted for a password while the input is masked for privacy.
 
---smtp-encryption::
-	Specify the encryption to use, either 'ssl' or 'tls'.  Any other
-	value reverts to plain SMTP.  Default is the value of
-	'sendemail.smtpencryption'.
+Automating
+~~~~~~~~~~
 
---smtp-ssl::
-	Legacy alias for '--smtp-encryption=ssl'.
+--cc-cmd::
+	Specify a command to execute once per patch file which
+	should generate patch file specific "Cc:" entries.
+	Output of this command must be single email address per line.
+	Default is the value of 'sendemail.cccmd' configuration value.
 
---subject::
-	Specify the initial subject of the email thread.
-	Only necessary if --compose is also set.  If --compose
-	is not set, this will be prompted for.
+--[no-]chain-reply-to::
+	If this is set, each email will be sent as a reply to the previous
+	email sent.  If disabled with "--no-chain-reply-to", all emails after
+	the first will be sent as replies to the first email sent.  When using
+	this, it is recommended that the first file given be an overview of the
+	entire patch series. Default is the value of the 'sendemail.chainreplyto'
+	configuration value; if that is unspecified, default to --chain-reply-to.
+
+--identity::
+	A configuration identity. When given, causes values in the
+	'sendemail.<identity>' subsection to take precedence over
+	values in the 'sendemail' section. The default identity is
+	the value of 'sendemail.identity'.
 
---suppress-from::
---no-suppress-from::
-        If this is set, do not add the From: address to the cc: list.
-        Default is the value of 'sendemail.suppressfrom' configuration value;
-        if that is unspecified, default to --no-suppress-from.
+--[no-]signed-off-by-cc::
+	If this is set, add emails found in Signed-off-by: or Cc: lines to the
+	cc list. Default is the value of 'sendemail.signedoffbycc' configuration
+	value; if that is unspecified, default to --signed-off-by-cc.
 
 --suppress-cc::
 	Specify an additional category of recipients to suppress the
@@ -163,44 +158,43 @@ user is prompted for a password while the input is masked for privacy.
 	if that is unspecified, default to 'self' if --suppress-from is
 	specified, as well as 'sob' if --no-signed-off-cc is specified.
 
---thread::
---no-thread::
+--[no-]suppress-from::
+	If this is set, do not add the From: address to the cc: list.
+	Default is the value of 'sendemail.suppressfrom' configuration
+	value; if that is unspecified, default to --no-suppress-from.
+
+--[no-]thread::
 	If this is set, the In-Reply-To header will be set on each email sent.
 	If disabled with "--no-thread", no emails will have the In-Reply-To
-	header set.
-	Default is the value of the 'sendemail.thread' configuration value;
-	if that is unspecified, default to --thread.
+	header set. Default is the value of the 'sendemail.thread' configuration
+	value; if that is unspecified, default to --thread.
+
+
+Administering
+~~~~~~~~~~~~~
 
 --dry-run::
 	Do everything except actually send the emails.
 
---envelope-sender::
-	Specify the envelope sender used to send the emails.
-	This is useful if your default address is not the address that is
-	subscribed to a list. If you use the sendmail binary, you must have
-	suitable privileges for the -f parameter.
-	Default is the value of the 'sendemail.envelopesender' configuration
-	variable; if that is unspecified, choosing the envelope sender is left
-	to your MTA.
+--quiet::
+	Make git-send-email less verbose.  One line per email should be
+	all that is output.
 
---to::
-	Specify the primary recipient of the emails generated.
-	Generally, this will be the upstream maintainer of the
-	project involved.
-	Default is the value of the 'sendemail.to' configuration value;
-	if that is unspecified, this will be prompted for.
+--[no-]validate::
+	Perform sanity checks on patches.
+	Currently, validation means the following:
 +
-The --to option must be repeated for each user you want on the to list.
+--
+		*	Warn of patches that contain lines longer than 998 characters; this
+			is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt.
+--
++
+Default is the value of 'sendemail.validate'; if this is not set,
+default to '--validate'.
 
 
 CONFIGURATION
 -------------
-sendemail.identity::
-	The default configuration identity. When specified,
-	'sendemail.<identity>.<item>' will have higher precedence than
-	'sendemail.<item>'. This is useful to declare multiple SMTP
-	identities and to hoist sensitive authentication information
-	out of the repository and into the global configuration file.
 
 sendemail.aliasesfile::
 	To avoid typing long email addresses, point this to one or more
@@ -210,38 +204,6 @@ sendemail.aliasfiletype::
 	Format of the file(s) specified in sendemail.aliasesfile. Must be
 	one of 'mutt', 'mailrc', 'pine', or 'gnus'.
 
-sendemail.to::
-	Email address (or alias) to always send to.
-
-sendemail.cccmd::
-	Command to execute to generate per patch file specific "Cc:"s.
-
-sendemail.bcc::
-	Email address (or alias) to always bcc.
-
-sendemail.chainreplyto::
-	Boolean value specifying the default to the '--chain_reply_to'
-	parameter.
-
-sendemail.smtpserver::
-	Default SMTP server to use.
-
-sendemail.smtpserverport::
-	Default SMTP server port to use.
-
-sendemail.smtpuser::
-	Default SMTP-AUTH username.
-
-sendemail.smtppass::
-	Default SMTP-AUTH password.
-
-sendemail.smtpencryption::
-	Default encryption method.  Use 'ssl' for SSL (and specify an
-	appropriate port), or 'tls' for TLS.  Takes precedence over
-	'smtpssl' if both are specified.
-
-sendemail.smtpssl::
-	Legacy boolean that sets 'smtpencryption=ssl' if enabled.
 
 Author
 ------
@@ -250,10 +212,12 @@ Written by Ryan Anderson <ryan@michonline.com>
 git-send-email is originally based upon
 send_lots_of_email.pl by Greg Kroah-Hartman.
 
+
 Documentation
 --------------
 Documentation by Ryan Anderson
 
+
 GIT
 ---
 Part of the linkgit:git[1] suite