summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLibravatar Junio C Hamano <gitster@pobox.com>2013-01-01 15:19:00 -0800
committerLibravatar Junio C Hamano <gitster@pobox.com>2013-01-02 09:31:09 -0800
commit7d5bf87ba37f9e3387bfd55dfe808301adb6a939 (patch)
treee0749c46ba244977d91a38701c9a8ad6d3204b9d
parentSubmittingPatches: mention subsystems with dedicated repositories (diff)
downloadtgif-7d5bf87ba37f9e3387bfd55dfe808301adb6a939.tar.xz
SubmittingPatches: remove overlong checklist
The section is no longer a concise checklist. It also talks about things that are not covered in the "Long version" text, which means people need to read both, covering more or less the same thing in different phrasing. Fold the details into the main text and remove the section. Signed-off-by: Junio C Hamano <gitster@pobox.com>
-rw-r--r--Documentation/SubmittingPatches137
1 files changed, 61 insertions, 76 deletions
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index e810263a95..b421f0a674 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -1,65 +1,3 @@
-Checklist (and a short version for the impatient):
-
- Commits:
-
- - make commits of logical units
- - check for unnecessary whitespace with "git diff --check"
- before committing
- - do not check in commented out code or unneeded files
- - the first line of the commit message should be a short
- description (50 characters is the soft limit, see DISCUSSION
- in git-commit(1)), and should skip the full stop
- - it is also conventional in most cases to prefix the
- first line with "area: " where the area is a filename
- or identifier for the general area of the code being
- modified, e.g.
- . archive: ustar header checksum is computed unsigned
- . git-cherry-pick.txt: clarify the use of revision range notation
- (if in doubt which identifier to use, run "git log --no-merges"
- on the files you are modifying to see the current conventions)
- - the body should provide a meaningful commit message, which:
- . explains the problem the change tries to solve, iow, what
- is wrong with the current code without the change.
- . justifies the way the change solves the problem, iow, why
- the result with the change is better.
- . alternate solutions considered but discarded, if any.
- - describe changes in imperative mood, e.g. "make xyzzy do frotz"
- instead of "[This patch] makes xyzzy do frotz" or "[I] changed
- xyzzy to do frotz", as if you are giving orders to the codebase
- to change its behaviour.
- - try to make sure your explanation can be understood without
- external resources. Instead of giving a URL to a mailing list
- archive, summarize the relevant points of the discussion.
- - add a "Signed-off-by: Your Name <you@example.com>" line to the
- commit message (or just use the option "-s" when committing)
- to confirm that you agree to the Developer's Certificate of Origin
- - make sure that you have tests for the bug you are fixing
- - make sure that the test suite passes after your commit
-
- Patch:
-
- - use "git format-patch -M" to create the patch
- - do not PGP sign your patch
- - do not attach your patch, but read in the mail
- body, unless you cannot teach your mailer to
- leave the formatting of the patch alone.
- - be careful doing cut & paste into your mailer, not to
- corrupt whitespaces.
- - provide additional information (which is unsuitable for
- the commit message) between the "---" and the diffstat
- - if you change, add, or remove a command line option or
- make some other user interface change, the associated
- documentation should be updated as well.
- - if your name is not writable in ASCII, make sure that
- you send off a message in the correct encoding.
- - send the patch to the list (git@vger.kernel.org) and the
- maintainer (gitster@pobox.com) if (and only if) the patch
- is ready for inclusion. If you use git-send-email(1),
- please test it first by sending email to yourself.
- - see below for instructions specific to your mailer
-
-Long version:
-
Here are some guidelines for people who want to contribute their code
to this software.
@@ -119,13 +57,53 @@ change, the approach taken by the change, and if relevant how this
differs substantially from the prior version, are all good things
to have.
+Make sure that you have tests for the bug you are fixing.
+
+When adding a new feature, make sure that you have new tests to show
+the feature triggers the new behaviour when it should, and to show the
+feature does not trigger when it shouldn't. Also make sure that the
+test suite passes after your commit. Do not forget to update the
+documentation to describe the updated behaviour.
+
Oh, another thing. I am picky about whitespaces. Make sure your
changes do not trigger errors with the sample pre-commit hook shipped
in templates/hooks--pre-commit. To help ensure this does not happen,
run git diff --check on your changes before you commit.
-(2) Generate your patch using git tools out of your commits.
+(2) Describe your changes well.
+
+The first line of the commit message should be a short description (50
+characters is the soft limit, see DISCUSSION in git-commit(1)), and
+should skip the full stop. It is also conventional in most cases to
+prefix the first line with "area: " where the area is a filename or
+identifier for the general area of the code being modified, e.g.
+
+ . archive: ustar header checksum is computed unsigned
+ . git-cherry-pick.txt: clarify the use of revision range notation
+
+If in doubt which identifier to use, run "git log --no-merges" on the
+files you are modifying to see the current conventions.
+
+The body should provide a meaningful commit message, which:
+
+ . explains the problem the change tries to solve, iow, what is wrong
+ with the current code without the change.
+
+ . justifies the way the change solves the problem, iow, why the
+ result with the change is better.
+
+ . alternate solutions considered but discarded, if any.
+
+Describe your changes in imperative mood, e.g. "make xyzzy do frotz"
+instead of "[This patch] makes xyzzy do frotz" or "[I] changed xyzzy
+to do frotz", as if you are giving orders to the codebase to change
+its behaviour. Try to make sure your explanation can be understood
+without external resources. Instead of giving a URL to a mailing list
+archive, summarize the relevant points of the discussion.
+
+
+(3) Generate your patch using git tools out of your commits.
git based diff tools generate unidiff which is the preferred format.
@@ -133,22 +111,27 @@ You do not have to be afraid to use -M option to "git diff" or
"git format-patch", if your patch involves file renames. The
receiving end can handle them just fine.
-Please make sure your patch does not include any extra files
-which do not belong in a patch submission. Make sure to review
+Please make sure your patch does not add commented out debugging code,
+or include any extra files which do not relate to what your patch
+is trying to achieve. Make sure to review
your patch after generating it, to ensure accuracy. Before
sending out, please make sure it cleanly applies to the "master"
branch head. If you are preparing a work based on "next" branch,
that is fine, but please mark it as such.
-(3) Sending your patches.
+(4) Sending your patches.
People on the git mailing list need to be able to read and
comment on the changes you are submitting. It is important for
a developer to be able to "quote" your changes, using standard
e-mail tools, so that they may comment on specific portions of
your code. For this reason, all patches should be submitted
-"inline". WARNING: Be wary of your MUAs word-wrap
+"inline". If your log message (including your name on the
+Signed-off-by line) is not writable in ASCII, make sure that
+you send off a message in the correct encoding.
+
+WARNING: Be wary of your MUAs word-wrap
corrupting your patch. Do not cut-n-paste your patch; you can
lose tabs that way if you are not careful.
@@ -200,19 +183,21 @@ patch, format it as "multipart/signed", not a text/plain message
that starts with '-----BEGIN PGP SIGNED MESSAGE-----'. That is
not a text/plain, it's something else.
-Unless your patch is a very trivial and an obviously correct one,
-first send it with "To:" set to the mailing list, with "cc:" listing
+Send your patch with "To:" set to the mailing list, with "cc:" listing
people who are involved in the area you are touching (the output from
"git blame $path" and "git shortlog --no-merges $path" would help to
-identify them), to solicit comments and reviews. After the list
-reached a consensus that it is a good idea to apply the patch, re-send
-it with "To:" set to the maintainer and optionally "cc:" the list for
-inclusion. Do not forget to add trailers such as "Acked-by:",
-"Reviewed-by:" and "Tested-by:" after your "Signed-off-by:" line as
-necessary.
+identify them), to solicit comments and reviews.
+
+After the list reached a consensus that it is a good idea to apply the
+patch, re-send it with "To:" set to the maintainer and "cc:" the
+list for inclusion.
+
+Do not forget to add trailers such as "Acked-by:", "Reviewed-by:" and
+"Tested-by:" lines as necessary to credit people who helped your
+patch.
-(4) Sign your work
+(5) Sign your work
To improve tracking of who did what, we've borrowed the
"sign-off" procedure from the Linux kernel project on patches