Merge branch 'jn/format-patch-doc' into maint

* jn/format-patch-doc:
  Documentation/format-patch: suggest Toggle Word Wrap add-on for Thunderbird
  Documentation: publicize hints for sending patches with GMail
  Documentation: publicize KMail hints for sending patches inline
  Documentation: hints for sending patches inline with Thunderbird
  Documentation: explain how to check for patch corruption

4 files changed, 229 insertions, 195 deletions

diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index c6a5032912..938eccf2a5 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -344,50 +344,20 @@ MUA specific hints
 
 Some of patches I receive or pick up from the list share common
 patterns of breakage.  Please make sure your MUA is set up
-properly not to corrupt whitespaces.  Here are two common ones
-I have seen:
+properly not to corrupt whitespaces.
 
-* Empty context lines that do not have _any_ whitespace.
+See the DISCUSSION section of git-format-patch(1) for hints on
+checking your patch by mailing it to yourself and applying with
+git-am(1).
 
-* Non empty context lines that have one extra whitespace at the
-  beginning.
-
-One test you could do yourself if your MUA is set up correctly is:
-
-* Send the patch to yourself, exactly the way you would, except
-  To: and Cc: lines, which would not contain the list and
-  maintainer address.
-
-* Save that patch to a file in UNIX mailbox format.  Call it say
-  a.patch.
-
-* Try to apply to the tip of the "master" branch from the
-  git.git public repository:
-
-    $ git fetch http://kernel.org/pub/scm/git/git.git master:test-apply
-    $ git checkout test-apply
-    $ git reset --hard
-    $ git am a.patch
-
-If it does not apply correctly, there can be various reasons.
-
-* Your patch itself does not apply cleanly.  That is _bad_ but
-  does not have much to do with your MUA.  Please rebase the
-  patch appropriately.
-
-* Your MUA corrupted your patch; "am" would complain that
-  the patch does not apply.  Look at .git/rebase-apply/ subdirectory and
-  see what 'patch' file contains and check for the common
-  corruption patterns mentioned above.
-
-* While you are at it, check what are in 'info' and
-  'final-commit' files as well.  If what is in 'final-commit' is
-  not exactly what you would want to see in the commit log
-  message, it is very likely that your maintainer would end up
-  hand editing the log message when he applies your patch.
-  Things like "Hi, this is my first patch.\n", if you really
-  want to put in the patch e-mail, should come after the
-  three-dash line that signals the end of the commit message.
+While you are at it, check the resulting commit log message from
+a trial run of applying the patch.  If what is in the resulting
+commit is not exactly what you would want to see, it is very
+likely that your maintainer would end up hand editing the log
+message when he applies your patch.  Things like "Hi, this is my
+first patch.\n", if you really want to put in the patch e-mail,
+should come after the three-dash line that signals the end of the
+commit message.
 
 
 Pine
@@ -443,89 +413,10 @@ that or Gentoo did it.) So you need to set the
 it.
 
 
-Thunderbird
------------
-
-(A Large Angry SCM)
-
-By default, Thunderbird will both wrap emails as well as flag them as
-being 'format=flowed', both of which will make the resulting email unusable
-by git.
-
-Here are some hints on how to successfully submit patches inline using
-Thunderbird.
-
-There are two different approaches.  One approach is to configure
-Thunderbird to not mangle patches.  The second approach is to use
-an external editor to keep Thunderbird from mangling the patches.
-
-Approach #1 (configuration):
-
-This recipe is current as of Thunderbird 2.0.0.19.  Three steps:
-  1.  Configure your mail server composition as plain text
-      Edit...Account Settings...Composition & Addressing,
-        uncheck 'Compose Messages in HTML'.
-  2.  Configure your general composition window to not wrap
-      Edit..Preferences..Composition, wrap plain text messages at 0
-  3.  Disable the use of format=flowed
-      Edit..Preferences..Advanced..Config Editor.  Search for:
-        mailnews.send_plaintext_flowed
-      toggle it to make sure it is set to 'false'.
-
-After that is done, you should be able to compose email as you
-otherwise would (cut + paste, git-format-patch | git-imap-send, etc),
-and the patches should not be mangled.
-
-Approach #2 (external editor):
-
-This recipe appears to work with the current [*1*] Thunderbird from Suse.
-
-The following Thunderbird extensions are needed:
-	AboutConfig 0.5
-		http://aboutconfig.mozdev.org/
-	External Editor 0.7.2
-		http://globs.org/articles.php?lng=en&pg=8
-
-1) Prepare the patch as a text file using your method of choice.
-
-2) Before opening a compose window, use Edit->Account Settings to
-uncheck the "Compose messages in HTML format" setting in the
-"Composition & Addressing" panel of the account to be used to send the
-patch. [*2*]
-
-3) In the main Thunderbird window, _before_ you open the compose window
-for the patch, use Tools->about:config to set the following to the
-indicated values:
-	mailnews.send_plaintext_flowed	=> false
-	mailnews.wraplength		=> 0
-
-4) Open a compose window and click the external editor icon.
-
-5) In the external editor window, read in the patch file and exit the
-editor normally.
-
-6) Back in the compose window: Add whatever other text you wish to the
-message, complete the addressing and subject fields, and press send.
-
-7) Optionally, undo the about:config/account settings changes made in
-steps 2 & 3.
+Thunderbird, KMail, GMail
+-------------------------
 
-
-[Footnotes]
-*1* Version 1.0 (20041207) from the MozillaThunderbird-1.0-5 rpm of Suse
-9.3 professional updates.
-
-*2* It may be possible to do this with about:config and the following
-settings but I haven't tried, yet.
-	mail.html_compose			=> false
-	mail.identity.default.compose_html	=> false
-	mail.identity.id?.compose_html		=> false
-
-(Lukas Sandström)
-
-There is a script in contrib/thunderbird-patch-inline which can help
-you include patches with Thunderbird in an easy way. To use it, do the
-steps above and then use the script as the external editor.
+See the MUA-SPECIFIC HINTS section of git-format-patch(1).
 
 Gnus
 ----
@@ -540,71 +431,3 @@ characters (most notably in people's names), and also
 whitespaces (fatal in patches).  Running 'C-u g' to display the
 message in raw form before using '|' to run the pipe can work
 this problem around.
-
-
-KMail
------
-
-This should help you to submit patches inline using KMail.
-
-1) Prepare the patch as a text file.
-
-2) Click on New Mail.
-
-3) Go under "Options" in the Composer window and be sure that
-"Word wrap" is not set.
-
-4) Use Message -> Insert file... and insert the patch.
-
-5) Back in the compose window: add whatever other text you wish to the
-message, complete the addressing and subject fields, and press send.
-
-
-Gmail
------
-
-GMail does not appear to have any way to turn off line wrapping in the web
-interface, so this will mangle any emails that you send.  You can however
-use "git send-email" and send your patches through the GMail SMTP server, or
-use any IMAP email client to connect to the google IMAP server and forward
-the emails through that.
-
-To use "git send-email" and send your patches through the GMail SMTP server,
-edit ~/.gitconfig to specify your account settings:
-
-[sendemail]
-	smtpencryption = tls
-	smtpserver = smtp.gmail.com
-	smtpuser = user@gmail.com
-	smtppass = p4ssw0rd
-	smtpserverport = 587
-
-Once your commits are ready to be sent to the mailing list, run the
-following commands:
-
-  $ git format-patch --cover-letter -M origin/master -o outgoing/
-  $ edit outgoing/0000-*
-  $ git send-email outgoing/*
-
-To submit using the IMAP interface, first, edit your ~/.gitconfig to specify your
-account settings:
-
-[imap]
-	folder = "[Gmail]/Drafts"
-	host = imaps://imap.gmail.com
-	user = user@gmail.com
-	pass = p4ssw0rd
-	port = 993
-	sslverify = false
-
-You might need to instead use: folder = "[Google Mail]/Drafts" if you get an error
-that the "Folder doesn't exist".
-
-Once your commits are ready to be sent to the mailing list, run the
-following commands:
-
-  $ git format-patch --cover-letter -M --stdout origin/master | git imap-send
-
-Just make sure to disable line wrapping in the email client (GMail web
-interface will line wrap no matter what, so you need to use a real
-IMAP client).
diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt
index 66aba8a2e9..d13c9b23f7 100644
--- a/Documentation/git-format-patch.txt
+++ b/Documentation/git-format-patch.txt
@@ -289,6 +289,175 @@ title is likely to be different from the subject of the discussion the
 patch is in response to, so it is likely that you would want to keep
 the Subject: line, like the example above.
 
+Checking for patch corruption
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Many mailers if not set up properly will corrupt whitespace.  Here are
+two common types of corruption:
+
+* Empty context lines that do not have _any_ whitespace.
+
+* Non-empty context lines that have one extra whitespace at the
+  beginning.
+
+One way to test if your MUA is set up correctly is:
+
+* Send the patch to yourself, exactly the way you would, except
+  with To: and Cc: lines that do not contain the list and
+  maintainer address.
+
+* Save that patch to a file in UNIX mailbox format.  Call it a.patch,
+  say.
+
+* Apply it:
+
+    $ git fetch <project> master:test-apply
+    $ git checkout test-apply
+    $ git reset --hard
+    $ git am a.patch
+
+If it does not apply correctly, there can be various reasons.
+
+* The patch itself does not apply cleanly.  That is _bad_ but
+  does not have much to do with your MUA.  You might want to rebase
+  the patch with linkgit:git-rebase[1] before regenerating it in
+  this case.
+
+* The MUA corrupted your patch; "am" would complain that
+  the patch does not apply.  Look in the .git/rebase-apply/ subdirectory and
+  see what 'patch' file contains and check for the common
+  corruption patterns mentioned above.
+
+* While at it, check the 'info' and 'final-commit' files as well.
+  If what is in 'final-commit' is not exactly what you would want to
+  see in the commit log message, it is very likely that the
+  receiver would end up hand editing the log message when applying
+  your patch.  Things like "Hi, this is my first patch.\n" in the
+  patch e-mail should come after the three-dash line that signals
+  the end of the commit message.
+
+MUA-SPECIFIC HINTS
+------------------
+Here are some hints on how to successfully submit patches inline using
+various mailers.
+
+GMail
+~~~~~
+GMail does not have any way to turn off line wrapping in the web
+interface, so it will mangle any emails that you send.  You can however
+use "git send-email" and send your patches through the GMail SMTP server, or
+use any IMAP email client to connect to the google IMAP server and forward
+the emails through that.
+
+For hints on using 'git send-email' to send your patches through the
+GMail SMTP server, see the EXAMPLE section of linkgit:git-send-email[1].
+
+For hints on submission using the IMAP interface, see the EXAMPLE
+section of linkgit:git-imap-send[1].
+
+Thunderbird
+~~~~~~~~~~~
+By default, Thunderbird will both wrap emails as well as flag
+them as being 'format=flowed', both of which will make the
+resulting email unusable by git.
+
+There are three different approaches: use an add-on to turn off line wraps,
+configure Thunderbird to not mangle patches, or use
+an external editor to keep Thunderbird from mangling the patches.
+
+Approach #1 (add-on)
+^^^^^^^^^^^^^^^^^^^^
+
+Install the Toggle Word Wrap add-on that is available from
+https://addons.mozilla.org/thunderbird/addon/toggle-word-wrap/
+It adds a menu entry "Enable Word Wrap" in the composer's "Options" menu
+that you can tick off. Now you can compose the message as you otherwise do
+(cut + paste, 'git format-patch' | 'git imap-send', etc), but you have to
+insert line breaks manually in any text that you type.
+
+Approach #2 (configuration)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Three steps:
+
+1. Configure your mail server composition as plain text:
+   Edit...Account Settings...Composition & Addressing,
+   uncheck "Compose Messages in HTML".
+
+2. Configure your general composition window to not wrap.
++
+In Thunderbird 2:
+Edit..Preferences..Composition, wrap plain text messages at 0
++
+In Thunderbird 3:
+Edit..Preferences..Advanced..Config Editor.  Search for
+"mail.wrap_long_lines".
+Toggle it to make sure it is set to `false`.
+
+3. Disable the use of format=flowed:
+Edit..Preferences..Advanced..Config Editor.  Search for
+"mailnews.send_plaintext_flowed".
+Toggle it to make sure it is set to `false`.
+
+After that is done, you should be able to compose email as you
+otherwise would (cut + paste, 'git format-patch' | 'git imap-send', etc),
+and the patches will not be mangled.
+
+Approach #3 (external editor)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following Thunderbird extensions are needed:
+AboutConfig from http://aboutconfig.mozdev.org/ and
+External Editor from http://globs.org/articles.php?lng=en&pg=8
+
+1. Prepare the patch as a text file using your method of choice.
+
+2. Before opening a compose window, use Edit->Account Settings to
+   uncheck the "Compose messages in HTML format" setting in the
+   "Composition & Addressing" panel of the account to be used to
+   send the patch.
+
+3. In the main Thunderbird window, 'before' you open the compose
+   window for the patch, use Tools->about:config to set the
+   following to the indicated values:
++
+----------
+	mailnews.send_plaintext_flowed  => false
+	mailnews.wraplength             => 0
+----------
+
+4. Open a compose window and click the external editor icon.
+
+5. In the external editor window, read in the patch file and exit
+   the editor normally.
+
+Side note: it may be possible to do step 2 with
+about:config and the following settings but no one's tried yet.
+
+----------
+	mail.html_compose                       => false
+	mail.identity.default.compose_html      => false
+	mail.identity.id?.compose_html          => false
+----------
+
+There is a script in contrib/thunderbird-patch-inline which can help
+you include patches with Thunderbird in an easy way. To use it, do the
+steps above and then use the script as the external editor.
+
+KMail
+~~~~~
+This should help you to submit patches inline using KMail.
+
+1. Prepare the patch as a text file.
+
+2. Click on New Mail.
+
+3. Go under "Options" in the Composer window and be sure that
+   "Word wrap" is not set.
+
+4. Use Message -> Insert file... and insert the patch.
+
+5. Back in the compose window: add whatever other text you wish to the
+   message, complete the addressing and subject fields, and press send.
+
 
 EXAMPLES
 --------
diff --git a/Documentation/git-imap-send.txt b/Documentation/git-imap-send.txt
index d3013d6a29..4e09708cc9 100644
--- a/Documentation/git-imap-send.txt
+++ b/Documentation/git-imap-send.txt
@@ -111,6 +111,31 @@ Using direct mode with SSL:
 ..........................
 
 
+EXAMPLE
+-------
+To submit patches using GMail's IMAP interface, first, edit your ~/.gitconfig
+to specify your account settings:
+
+---------
+[imap]
+	folder = "[Gmail]/Drafts"
+	host = imaps://imap.gmail.com
+	user = user@gmail.com
+	port = 993
+	sslverify = false
+---------
+
+You might need to instead use: folder = "[Google Mail]/Drafts" if you get an error
+that the "Folder doesn't exist".
+
+Once the commits are ready to be sent, run the following command:
+
+  $ git format-patch --cover-letter -M --stdout origin/master | git imap-send
+
+Just make sure to disable line wrapping in the email client (GMail's web
+interface will wrap lines no matter what, so you need to use a real
+IMAP client).
+
 CAUTION
 -------
 It is still your responsibility to make sure that the email message
@@ -124,6 +149,10 @@ Thunderbird in particular is known to be problematic.  Thunderbird
 users may wish to visit this web page for more information:
   http://kb.mozillazine.org/Plain_text_e-mail_-_Thunderbird#Completely_plain_email
 
+SEE ALSO
+--------
+linkgit:git-format-patch[1], linkgit:git-send-email[1], mbox(5)
+
 GIT
 ---
 Part of the linkgit:git[1] suite
diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt
index ee14f74fd3..5a168cfab2 100644
--- a/Documentation/git-send-email.txt
+++ b/Documentation/git-send-email.txt
@@ -348,10 +348,12 @@ sendemail.confirm::
 	one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm'
 	in the previous section for the meaning of these values.
 
+EXAMPLE
+-------
 Use gmail as the smtp server
-----------------------------
-
-Add the following section to the config file:
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+To use 'git send-email' to send your patches through the GMail SMTP server,
+edit ~/.gitconfig to specify your account settings:
 
 	[sendemail]
 		smtpencryption = tls
@@ -359,9 +361,20 @@ Add the following section to the config file:
 		smtpuser = yourname@gmail.com
 		smtpserverport = 587
 
+Once your commits are ready to be sent to the mailing list, run the
+following commands:
+
+	$ git format-patch --cover-letter -M origin/master -o outgoing/
+	$ edit outgoing/0000-*
+	$ git send-email outgoing/*
+
 Note: the following perl modules are required
       Net::SMTP::SSL, MIME::Base64 and Authen::SASL
 
+SEE ALSO
+--------
+linkgit:git-format-patch[1], linkgit:git-imap-send[1], mbox(5)
+
 GIT
 ---
 Part of the linkgit:git[1] suite