1 files changed, 332 insertions, 0 deletions
diff --git a/vendor/go.opentelemetry.io/otel/metric/instrument.go b/vendor/go.opentelemetry.io/otel/metric/instrument.go
new file mode 100644
index 000000000..0033c1e12
--- /dev/null
+++ b/vendor/go.opentelemetry.io/otel/metric/instrument.go
@@ -0,0 +1,332 @@
+// Copyright The OpenTelemetry Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package metric // import "go.opentelemetry.io/otel/metric"
+
+import "go.opentelemetry.io/otel/attribute"
+
+// Observable is used as a grouping mechanism for all instruments that are
+// updated within a Callback.
+type Observable interface {
+	observable()
+}
+
+// InstrumentOption applies options to all instruments.
+type InstrumentOption interface {
+	Int64CounterOption
+	Int64UpDownCounterOption
+	Int64HistogramOption
+	Int64ObservableCounterOption
+	Int64ObservableUpDownCounterOption
+	Int64ObservableGaugeOption
+
+	Float64CounterOption
+	Float64UpDownCounterOption
+	Float64HistogramOption
+	Float64ObservableCounterOption
+	Float64ObservableUpDownCounterOption
+	Float64ObservableGaugeOption
+}
+
+type descOpt string
+
+func (o descOpt) applyFloat64Counter(c Float64CounterConfig) Float64CounterConfig {
+	c.description = string(o)
+	return c
+}
+
+func (o descOpt) applyFloat64UpDownCounter(c Float64UpDownCounterConfig) Float64UpDownCounterConfig {
+	c.description = string(o)
+	return c
+}
+
+func (o descOpt) applyFloat64Histogram(c Float64HistogramConfig) Float64HistogramConfig {
+	c.description = string(o)
+	return c
+}
+
+func (o descOpt) applyFloat64ObservableCounter(c Float64ObservableCounterConfig) Float64ObservableCounterConfig {
+	c.description = string(o)
+	return c
+}
+
+func (o descOpt) applyFloat64ObservableUpDownCounter(c Float64ObservableUpDownCounterConfig) Float64ObservableUpDownCounterConfig {
+	c.description = string(o)
+	return c
+}
+
+func (o descOpt) applyFloat64ObservableGauge(c Float64ObservableGaugeConfig) Float64ObservableGaugeConfig {
+	c.description = string(o)
+	return c
+}
+
+func (o descOpt) applyInt64Counter(c Int64CounterConfig) Int64CounterConfig {
+	c.description = string(o)
+	return c
+}
+
+func (o descOpt) applyInt64UpDownCounter(c Int64UpDownCounterConfig) Int64UpDownCounterConfig {
+	c.description = string(o)
+	return c
+}
+
+func (o descOpt) applyInt64Histogram(c Int64HistogramConfig) Int64HistogramConfig {
+	c.description = string(o)
+	return c
+}
+
+func (o descOpt) applyInt64ObservableCounter(c Int64ObservableCounterConfig) Int64ObservableCounterConfig {
+	c.description = string(o)
+	return c
+}
+
+func (o descOpt) applyInt64ObservableUpDownCounter(c Int64ObservableUpDownCounterConfig) Int64ObservableUpDownCounterConfig {
+	c.description = string(o)
+	return c
+}
+
+func (o descOpt) applyInt64ObservableGauge(c Int64ObservableGaugeConfig) Int64ObservableGaugeConfig {
+	c.description = string(o)
+	return c
+}
+
+// WithDescription sets the instrument description.
+func WithDescription(desc string) InstrumentOption { return descOpt(desc) }
+
+type unitOpt string
+
+func (o unitOpt) applyFloat64Counter(c Float64CounterConfig) Float64CounterConfig {
+	c.unit = string(o)
+	return c
+}
+
+func (o unitOpt) applyFloat64UpDownCounter(c Float64UpDownCounterConfig) Float64UpDownCounterConfig {
+	c.unit = string(o)
+	return c
+}
+
+func (o unitOpt) applyFloat64Histogram(c Float64HistogramConfig) Float64HistogramConfig {
+	c.unit = string(o)
+	return c
+}
+
+func (o unitOpt) applyFloat64ObservableCounter(c Float64ObservableCounterConfig) Float64ObservableCounterConfig {
+	c.unit = string(o)
+	return c
+}
+
+func (o unitOpt) applyFloat64ObservableUpDownCounter(c Float64ObservableUpDownCounterConfig) Float64ObservableUpDownCounterConfig {
+	c.unit = string(o)
+	return c
+}
+
+func (o unitOpt) applyFloat64ObservableGauge(c Float64ObservableGaugeConfig) Float64ObservableGaugeConfig {
+	c.unit = string(o)
+	return c
+}
+
+func (o unitOpt) applyInt64Counter(c Int64CounterConfig) Int64CounterConfig {
+	c.unit = string(o)
+	return c
+}
+
+func (o unitOpt) applyInt64UpDownCounter(c Int64UpDownCounterConfig) Int64UpDownCounterConfig {
+	c.unit = string(o)
+	return c
+}
+
+func (o unitOpt) applyInt64Histogram(c Int64HistogramConfig) Int64HistogramConfig {
+	c.unit = string(o)
+	return c
+}
+
+func (o unitOpt) applyInt64ObservableCounter(c Int64ObservableCounterConfig) Int64ObservableCounterConfig {
+	c.unit = string(o)
+	return c
+}
+
+func (o unitOpt) applyInt64ObservableUpDownCounter(c Int64ObservableUpDownCounterConfig) Int64ObservableUpDownCounterConfig {
+	c.unit = string(o)
+	return c
+}
+
+func (o unitOpt) applyInt64ObservableGauge(c Int64ObservableGaugeConfig) Int64ObservableGaugeConfig {
+	c.unit = string(o)
+	return c
+}
+
+// WithUnit sets the instrument unit.
+func WithUnit(u string) InstrumentOption { return unitOpt(u) }
+
+// AddOption applies options to an addition measurement. See
+// [MeasurementOption] for other options that can be used as an AddOption.
+type AddOption interface {
+	applyAdd(AddConfig) AddConfig
+}
+
+// AddConfig contains options for an addition measurement.
+type AddConfig struct {
+	attrs attribute.Set
+}
+
+// NewAddConfig returns a new [AddConfig] with all opts applied.
+func NewAddConfig(opts []AddOption) AddConfig {
+	config := AddConfig{attrs: *attribute.EmptySet()}
+	for _, o := range opts {
+		config = o.applyAdd(config)
+	}
+	return config
+}
+
+// Attributes returns the configured attribute set.
+func (c AddConfig) Attributes() attribute.Set {
+	return c.attrs
+}
+
+// RecordOption applies options to an addition measurement. See
+// [MeasurementOption] for other options that can be used as a RecordOption.
+type RecordOption interface {
+	applyRecord(RecordConfig) RecordConfig
+}
+
+// RecordConfig contains options for a recorded measurement.
+type RecordConfig struct {
+	attrs attribute.Set
+}
+
+// NewRecordConfig returns a new [RecordConfig] with all opts applied.
+func NewRecordConfig(opts []RecordOption) RecordConfig {
+	config := RecordConfig{attrs: *attribute.EmptySet()}
+	for _, o := range opts {
+		config = o.applyRecord(config)
+	}
+	return config
+}
+
+// Attributes returns the configured attribute set.
+func (c RecordConfig) Attributes() attribute.Set {
+	return c.attrs
+}
+
+// ObserveOption applies options to an addition measurement. See
+// [MeasurementOption] for other options that can be used as a ObserveOption.
+type ObserveOption interface {
+	applyObserve(ObserveConfig) ObserveConfig
+}
+
+// ObserveConfig contains options for an observed measurement.
+type ObserveConfig struct {
+	attrs attribute.Set
+}
+
+// NewObserveConfig returns a new [ObserveConfig] with all opts applied.
+func NewObserveConfig(opts []ObserveOption) ObserveConfig {
+	config := ObserveConfig{attrs: *attribute.EmptySet()}
+	for _, o := range opts {
+		config = o.applyObserve(config)
+	}
+	return config
+}
+
+// Attributes returns the configured attribute set.
+func (c ObserveConfig) Attributes() attribute.Set {
+	return c.attrs
+}
+
+// MeasurementOption applies options to all instrument measurement.
+type MeasurementOption interface {
+	AddOption
+	RecordOption
+	ObserveOption
+}
+
+type attrOpt struct {
+	set attribute.Set
+}
+
+// mergeSets returns the union of keys between a and b. Any duplicate keys will
+// use the value associated with b.
+func mergeSets(a, b attribute.Set) attribute.Set {
+	// NewMergeIterator uses the first value for any duplicates.
+	iter := attribute.NewMergeIterator(&b, &a)
+	merged := make([]attribute.KeyValue, 0, a.Len()+b.Len())
+	for iter.Next() {
+		merged = append(merged, iter.Attribute())
+	}
+	return attribute.NewSet(merged...)
+}
+
+func (o attrOpt) applyAdd(c AddConfig) AddConfig {
+	switch {
+	case o.set.Len() == 0:
+	case c.attrs.Len() == 0:
+		c.attrs = o.set
+	default:
+		c.attrs = mergeSets(c.attrs, o.set)
+	}
+	return c
+}
+
+func (o attrOpt) applyRecord(c RecordConfig) RecordConfig {
+	switch {
+	case o.set.Len() == 0:
+	case c.attrs.Len() == 0:
+		c.attrs = o.set
+	default:
+		c.attrs = mergeSets(c.attrs, o.set)
+	}
+	return c
+}
+
+func (o attrOpt) applyObserve(c ObserveConfig) ObserveConfig {
+	switch {
+	case o.set.Len() == 0:
+	case c.attrs.Len() == 0:
+		c.attrs = o.set
+	default:
+		c.attrs = mergeSets(c.attrs, o.set)
+	}
+	return c
+}
+
+// WithAttributeSet sets the attribute Set associated with a measurement is
+// made with.
+//
+// If multiple WithAttributeSet or WithAttributes options are passed the
+// attributes will be merged together in the order they are passed. Attributes
+// with duplicate keys will use the last value passed.
+func WithAttributeSet(attributes attribute.Set) MeasurementOption {
+	return attrOpt{set: attributes}
+}
+
+// WithAttributes converts attributes into an attribute Set and sets the Set to
+// be associated with a measurement. This is shorthand for:
+//
+//	cp := make([]attribute.KeyValue, len(attributes))
+//	copy(cp, attributes)
+//	WithAttributes(attribute.NewSet(cp...))
+//
+// [attribute.NewSet] may modify the passed attributes so this will make a copy
+// of attributes before creating a set in order to ensure this function is
+// concurrent safe. This makes this option function less optimized in
+// comparison to [WithAttributeSet]. Therefore, [WithAttributeSet] should be
+// preferred for performance sensitive code.
+//
+// See [WithAttributeSet] for information about how multiple WithAttributes are
+// merged.
+func WithAttributes(attributes ...attribute.KeyValue) MeasurementOption {
+	cp := make([]attribute.KeyValue, len(attributes))
+	copy(cp, attributes)
+	return attrOpt{set: attribute.NewSet(cp...)}
+}