2 files changed, 384 insertions, 0 deletions
diff --git a/vendor/github.com/klauspost/compress/zlib/reader.go b/vendor/github.com/klauspost/compress/zlib/reader.go
new file mode 100644
index 000000000..f127d4776
--- /dev/null
+++ b/vendor/github.com/klauspost/compress/zlib/reader.go
@@ -0,0 +1,183 @@
+// Copyright 2009 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package zlib implements reading and writing of zlib format compressed data,
+as specified in RFC 1950.
+
+The implementation provides filters that uncompress during reading
+and compress during writing.  For example, to write compressed data
+to a buffer:
+
+	var b bytes.Buffer
+	w := zlib.NewWriter(&b)
+	w.Write([]byte("hello, world\n"))
+	w.Close()
+
+and to read that data back:
+
+	r, err := zlib.NewReader(&b)
+	io.Copy(os.Stdout, r)
+	r.Close()
+*/
+package zlib
+
+import (
+	"bufio"
+	"compress/zlib"
+	"hash"
+	"hash/adler32"
+	"io"
+
+	"github.com/klauspost/compress/flate"
+)
+
+const zlibDeflate = 8
+
+var (
+	// ErrChecksum is returned when reading ZLIB data that has an invalid checksum.
+	ErrChecksum = zlib.ErrChecksum
+	// ErrDictionary is returned when reading ZLIB data that has an invalid dictionary.
+	ErrDictionary = zlib.ErrDictionary
+	// ErrHeader is returned when reading ZLIB data that has an invalid header.
+	ErrHeader = zlib.ErrHeader
+)
+
+type reader struct {
+	r            flate.Reader
+	decompressor io.ReadCloser
+	digest       hash.Hash32
+	err          error
+	scratch      [4]byte
+}
+
+// Resetter resets a ReadCloser returned by NewReader or NewReaderDict to
+// to switch to a new underlying Reader. This permits reusing a ReadCloser
+// instead of allocating a new one.
+type Resetter interface {
+	// Reset discards any buffered data and resets the Resetter as if it was
+	// newly initialized with the given reader.
+	Reset(r io.Reader, dict []byte) error
+}
+
+// NewReader creates a new ReadCloser.
+// Reads from the returned ReadCloser read and decompress data from r.
+// If r does not implement io.ByteReader, the decompressor may read more
+// data than necessary from r.
+// It is the caller's responsibility to call Close on the ReadCloser when done.
+//
+// The ReadCloser returned by NewReader also implements Resetter.
+func NewReader(r io.Reader) (io.ReadCloser, error) {
+	return NewReaderDict(r, nil)
+}
+
+// NewReaderDict is like NewReader but uses a preset dictionary.
+// NewReaderDict ignores the dictionary if the compressed data does not refer to it.
+// If the compressed data refers to a different dictionary, NewReaderDict returns ErrDictionary.
+//
+// The ReadCloser returned by NewReaderDict also implements Resetter.
+func NewReaderDict(r io.Reader, dict []byte) (io.ReadCloser, error) {
+	z := new(reader)
+	err := z.Reset(r, dict)
+	if err != nil {
+		return nil, err
+	}
+	return z, nil
+}
+
+func (z *reader) Read(p []byte) (int, error) {
+	if z.err != nil {
+		return 0, z.err
+	}
+
+	var n int
+	n, z.err = z.decompressor.Read(p)
+	z.digest.Write(p[0:n])
+	if z.err != io.EOF {
+		// In the normal case we return here.
+		return n, z.err
+	}
+
+	// Finished file; check checksum.
+	if _, err := io.ReadFull(z.r, z.scratch[0:4]); err != nil {
+		if err == io.EOF {
+			err = io.ErrUnexpectedEOF
+		}
+		z.err = err
+		return n, z.err
+	}
+	// ZLIB (RFC 1950) is big-endian, unlike GZIP (RFC 1952).
+	checksum := uint32(z.scratch[0])<<24 | uint32(z.scratch[1])<<16 | uint32(z.scratch[2])<<8 | uint32(z.scratch[3])
+	if checksum != z.digest.Sum32() {
+		z.err = ErrChecksum
+		return n, z.err
+	}
+	return n, io.EOF
+}
+
+// Calling Close does not close the wrapped io.Reader originally passed to NewReader.
+// In order for the ZLIB checksum to be verified, the reader must be
+// fully consumed until the io.EOF.
+func (z *reader) Close() error {
+	if z.err != nil && z.err != io.EOF {
+		return z.err
+	}
+	z.err = z.decompressor.Close()
+	return z.err
+}
+
+func (z *reader) Reset(r io.Reader, dict []byte) error {
+	*z = reader{decompressor: z.decompressor, digest: z.digest}
+	if fr, ok := r.(flate.Reader); ok {
+		z.r = fr
+	} else {
+		z.r = bufio.NewReader(r)
+	}
+
+	// Read the header (RFC 1950 section 2.2.).
+	_, z.err = io.ReadFull(z.r, z.scratch[0:2])
+	if z.err != nil {
+		if z.err == io.EOF {
+			z.err = io.ErrUnexpectedEOF
+		}
+		return z.err
+	}
+	h := uint(z.scratch[0])<<8 | uint(z.scratch[1])
+	if (z.scratch[0]&0x0f != zlibDeflate) || (h%31 != 0) {
+		z.err = ErrHeader
+		return z.err
+	}
+	haveDict := z.scratch[1]&0x20 != 0
+	if haveDict {
+		_, z.err = io.ReadFull(z.r, z.scratch[0:4])
+		if z.err != nil {
+			if z.err == io.EOF {
+				z.err = io.ErrUnexpectedEOF
+			}
+			return z.err
+		}
+		checksum := uint32(z.scratch[0])<<24 | uint32(z.scratch[1])<<16 | uint32(z.scratch[2])<<8 | uint32(z.scratch[3])
+		if checksum != adler32.Checksum(dict) {
+			z.err = ErrDictionary
+			return z.err
+		}
+	}
+
+	if z.decompressor == nil {
+		if haveDict {
+			z.decompressor = flate.NewReaderDict(z.r, dict)
+		} else {
+			z.decompressor = flate.NewReader(z.r)
+		}
+	} else {
+		z.decompressor.(flate.Resetter).Reset(z.r, dict)
+	}
+
+	if z.digest != nil {
+		z.digest.Reset()
+	} else {
+		z.digest = adler32.New()
+	}
+	return nil
+}
diff --git a/vendor/github.com/klauspost/compress/zlib/writer.go b/vendor/github.com/klauspost/compress/zlib/writer.go
new file mode 100644
index 000000000..605816ba4
--- /dev/null
+++ b/vendor/github.com/klauspost/compress/zlib/writer.go
@@ -0,0 +1,201 @@
+// Copyright 2009 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package zlib
+
+import (
+	"fmt"
+	"hash"
+	"hash/adler32"
+	"io"
+
+	"github.com/klauspost/compress/flate"
+)
+
+// These constants are copied from the flate package, so that code that imports
+// "compress/zlib" does not also have to import "compress/flate".
+const (
+	NoCompression       = flate.NoCompression
+	BestSpeed           = flate.BestSpeed
+	BestCompression     = flate.BestCompression
+	DefaultCompression  = flate.DefaultCompression
+	ConstantCompression = flate.ConstantCompression
+	HuffmanOnly         = flate.HuffmanOnly
+)
+
+// A Writer takes data written to it and writes the compressed
+// form of that data to an underlying writer (see NewWriter).
+type Writer struct {
+	w           io.Writer
+	level       int
+	dict        []byte
+	compressor  *flate.Writer
+	digest      hash.Hash32
+	err         error
+	scratch     [4]byte
+	wroteHeader bool
+}
+
+// NewWriter creates a new Writer.
+// Writes to the returned Writer are compressed and written to w.
+//
+// It is the caller's responsibility to call Close on the WriteCloser when done.
+// Writes may be buffered and not flushed until Close.
+func NewWriter(w io.Writer) *Writer {
+	z, _ := NewWriterLevelDict(w, DefaultCompression, nil)
+	return z
+}
+
+// NewWriterLevel is like NewWriter but specifies the compression level instead
+// of assuming DefaultCompression.
+//
+// The compression level can be DefaultCompression, NoCompression, HuffmanOnly
+// or any integer value between BestSpeed and BestCompression inclusive.
+// The error returned will be nil if the level is valid.
+func NewWriterLevel(w io.Writer, level int) (*Writer, error) {
+	return NewWriterLevelDict(w, level, nil)
+}
+
+// NewWriterLevelDict is like NewWriterLevel but specifies a dictionary to
+// compress with.
+//
+// The dictionary may be nil. If not, its contents should not be modified until
+// the Writer is closed.
+func NewWriterLevelDict(w io.Writer, level int, dict []byte) (*Writer, error) {
+	if level < HuffmanOnly || level > BestCompression {
+		return nil, fmt.Errorf("zlib: invalid compression level: %d", level)
+	}
+	return &Writer{
+		w:     w,
+		level: level,
+		dict:  dict,
+	}, nil
+}
+
+// Reset clears the state of the Writer z such that it is equivalent to its
+// initial state from NewWriterLevel or NewWriterLevelDict, but instead writing
+// to w.
+func (z *Writer) Reset(w io.Writer) {
+	z.w = w
+	// z.level and z.dict left unchanged.
+	if z.compressor != nil {
+		z.compressor.Reset(w)
+	}
+	if z.digest != nil {
+		z.digest.Reset()
+	}
+	z.err = nil
+	z.scratch = [4]byte{}
+	z.wroteHeader = false
+}
+
+// writeHeader writes the ZLIB header.
+func (z *Writer) writeHeader() (err error) {
+	z.wroteHeader = true
+	// ZLIB has a two-byte header (as documented in RFC 1950).
+	// The first four bits is the CINFO (compression info), which is 7 for the default deflate window size.
+	// The next four bits is the CM (compression method), which is 8 for deflate.
+	z.scratch[0] = 0x78
+	// The next two bits is the FLEVEL (compression level). The four values are:
+	// 0=fastest, 1=fast, 2=default, 3=best.
+	// The next bit, FDICT, is set if a dictionary is given.
+	// The final five FCHECK bits form a mod-31 checksum.
+	switch z.level {
+	case -2, 0, 1:
+		z.scratch[1] = 0 << 6
+	case 2, 3, 4, 5:
+		z.scratch[1] = 1 << 6
+	case 6, -1:
+		z.scratch[1] = 2 << 6
+	case 7, 8, 9:
+		z.scratch[1] = 3 << 6
+	default:
+		panic("unreachable")
+	}
+	if z.dict != nil {
+		z.scratch[1] |= 1 << 5
+	}
+	z.scratch[1] += uint8(31 - (uint16(z.scratch[0])<<8+uint16(z.scratch[1]))%31)
+	if _, err = z.w.Write(z.scratch[0:2]); err != nil {
+		return err
+	}
+	if z.dict != nil {
+		// The next four bytes are the Adler-32 checksum of the dictionary.
+		checksum := adler32.Checksum(z.dict)
+		z.scratch[0] = uint8(checksum >> 24)
+		z.scratch[1] = uint8(checksum >> 16)
+		z.scratch[2] = uint8(checksum >> 8)
+		z.scratch[3] = uint8(checksum >> 0)
+		if _, err = z.w.Write(z.scratch[0:4]); err != nil {
+			return err
+		}
+	}
+	if z.compressor == nil {
+		// Initialize deflater unless the Writer is being reused
+		// after a Reset call.
+		z.compressor, err = flate.NewWriterDict(z.w, z.level, z.dict)
+		if err != nil {
+			return err
+		}
+		z.digest = adler32.New()
+	}
+	return nil
+}
+
+// Write writes a compressed form of p to the underlying io.Writer. The
+// compressed bytes are not necessarily flushed until the Writer is closed or
+// explicitly flushed.
+func (z *Writer) Write(p []byte) (n int, err error) {
+	if !z.wroteHeader {
+		z.err = z.writeHeader()
+	}
+	if z.err != nil {
+		return 0, z.err
+	}
+	if len(p) == 0 {
+		return 0, nil
+	}
+	n, err = z.compressor.Write(p)
+	if err != nil {
+		z.err = err
+		return
+	}
+	z.digest.Write(p)
+	return
+}
+
+// Flush flushes the Writer to its underlying io.Writer.
+func (z *Writer) Flush() error {
+	if !z.wroteHeader {
+		z.err = z.writeHeader()
+	}
+	if z.err != nil {
+		return z.err
+	}
+	z.err = z.compressor.Flush()
+	return z.err
+}
+
+// Close closes the Writer, flushing any unwritten data to the underlying
+// io.Writer, but does not close the underlying io.Writer.
+func (z *Writer) Close() error {
+	if !z.wroteHeader {
+		z.err = z.writeHeader()
+	}
+	if z.err != nil {
+		return z.err
+	}
+	z.err = z.compressor.Close()
+	if z.err != nil {
+		return z.err
+	}
+	checksum := z.digest.Sum32()
+	// ZLIB (RFC 1950) is big-endian, unlike GZIP (RFC 1952).
+	z.scratch[0] = uint8(checksum >> 24)
+	z.scratch[1] = uint8(checksum >> 16)
+	z.scratch[2] = uint8(checksum >> 8)
+	z.scratch[3] = uint8(checksum >> 0)
+	_, z.err = z.w.Write(z.scratch[0:4])
+	return z.err
+}